qemu/util/log.c
Richard Henderson 5a18407f55 tcg: Lower indirect registers in a separate pass
Rather than rely on recursion during the middle of register allocation,
lower indirect registers to loads and stores off the indirect base into
plain temps.

For an x86_64 host, with sufficient registers, this results in identical
code, modulo the actual register assignments.

For an i686 host, with insufficient registers, this means that temps can
be (temporarily) spilled to the stack in order to satisfy an allocation.
This as opposed to the possibility of not being able to spill, to allocate
a register for the indirect base, in order to perform a spill.

Reviewed-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Richard Henderson <rth@twiddle.net>
2016-08-05 21:44:40 +05:30

339 lines
9.5 KiB
C

/*
* Logging support
*
* Copyright (c) 2003 Fabrice Bellard
*
* This library is free software; you can redistribute it and/or
* modify it under the terms of the GNU Lesser General Public
* License as published by the Free Software Foundation; either
* version 2 of the License, or (at your option) any later version.
*
* This library is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* Lesser General Public License for more details.
*
* You should have received a copy of the GNU Lesser General Public
* License along with this library; if not, see <http://www.gnu.org/licenses/>.
*/
#include "qemu/osdep.h"
#include "qemu-common.h"
#include "qemu/log.h"
#include "qemu/range.h"
#include "qemu/error-report.h"
#include "qapi/error.h"
#include "qemu/cutils.h"
#include "trace/control.h"
static char *logfilename;
FILE *qemu_logfile;
int qemu_loglevel;
static int log_append = 0;
static GArray *debug_regions;
/* Return the number of characters emitted. */
int qemu_log(const char *fmt, ...)
{
int ret = 0;
if (qemu_logfile) {
va_list ap;
va_start(ap, fmt);
ret = vfprintf(qemu_logfile, fmt, ap);
va_end(ap);
/* Don't pass back error results. */
if (ret < 0) {
ret = 0;
}
}
return ret;
}
static bool log_uses_own_buffers;
/* enable or disable low levels log */
void qemu_set_log(int log_flags)
{
qemu_loglevel = log_flags;
#ifdef CONFIG_TRACE_LOG
qemu_loglevel |= LOG_TRACE;
#endif
if (!qemu_logfile &&
(is_daemonized() ? logfilename != NULL : qemu_loglevel)) {
if (logfilename) {
qemu_logfile = fopen(logfilename, log_append ? "a" : "w");
if (!qemu_logfile) {
perror(logfilename);
_exit(1);
}
/* In case we are a daemon redirect stderr to logfile */
if (is_daemonized()) {
dup2(fileno(qemu_logfile), STDERR_FILENO);
fclose(qemu_logfile);
/* This will skip closing logfile in qemu_log_close() */
qemu_logfile = stderr;
}
} else {
/* Default to stderr if no log file specified */
assert(!is_daemonized());
qemu_logfile = stderr;
}
/* must avoid mmap() usage of glibc by setting a buffer "by hand" */
if (log_uses_own_buffers) {
static char logfile_buf[4096];
setvbuf(qemu_logfile, logfile_buf, _IOLBF, sizeof(logfile_buf));
} else {
#if defined(_WIN32)
/* Win32 doesn't support line-buffering, so use unbuffered output. */
setvbuf(qemu_logfile, NULL, _IONBF, 0);
#else
setvbuf(qemu_logfile, NULL, _IOLBF, 0);
#endif
log_append = 1;
}
}
if (qemu_logfile &&
(is_daemonized() ? logfilename == NULL : !qemu_loglevel)) {
qemu_log_close();
}
}
void qemu_log_needs_buffers(void)
{
log_uses_own_buffers = true;
}
/*
* Allow the user to include %d in their logfile which will be
* substituted with the current PID. This is useful for debugging many
* nested linux-user tasks but will result in lots of logs.
*/
void qemu_set_log_filename(const char *filename, Error **errp)
{
char *pidstr;
g_free(logfilename);
pidstr = strstr(filename, "%");
if (pidstr) {
/* We only accept one %d, no other format strings */
if (pidstr[1] != 'd' || strchr(pidstr + 2, '%')) {
error_setg(errp, "Bad logfile format: %s", filename);
return;
} else {
logfilename = g_strdup_printf(filename, getpid());
}
} else {
logfilename = g_strdup(filename);
}
qemu_log_close();
qemu_set_log(qemu_loglevel);
}
/* Returns true if addr is in our debug filter or no filter defined
*/
bool qemu_log_in_addr_range(uint64_t addr)
{
if (debug_regions) {
int i = 0;
for (i = 0; i < debug_regions->len; i++) {
Range *range = &g_array_index(debug_regions, Range, i);
if (range_contains(range, addr)) {
return true;
}
}
return false;
} else {
return true;
}
}
void qemu_set_dfilter_ranges(const char *filter_spec, Error **errp)
{
gchar **ranges = g_strsplit(filter_spec, ",", 0);
int i;
if (debug_regions) {
g_array_unref(debug_regions);
debug_regions = NULL;
}
debug_regions = g_array_sized_new(FALSE, FALSE,
sizeof(Range), g_strv_length(ranges));
for (i = 0; ranges[i]; i++) {
const char *r = ranges[i];
const char *range_op, *r2, *e;
uint64_t r1val, r2val, lob, upb;
struct Range range;
range_op = strstr(r, "-");
r2 = range_op ? range_op + 1 : NULL;
if (!range_op) {
range_op = strstr(r, "+");
r2 = range_op ? range_op + 1 : NULL;
}
if (!range_op) {
range_op = strstr(r, "..");
r2 = range_op ? range_op + 2 : NULL;
}
if (!range_op) {
error_setg(errp, "Bad range specifier");
goto out;
}
if (qemu_strtoull(r, &e, 0, &r1val)
|| e != range_op) {
error_setg(errp, "Invalid number to the left of %.*s",
(int)(r2 - range_op), range_op);
goto out;
}
if (qemu_strtoull(r2, NULL, 0, &r2val)) {
error_setg(errp, "Invalid number to the right of %.*s",
(int)(r2 - range_op), range_op);
goto out;
}
switch (*range_op) {
case '+':
lob = r1val;
upb = r1val + r2val - 1;
break;
case '-':
upb = r1val;
lob = r1val - (r2val - 1);
break;
case '.':
lob = r1val;
upb = r2val;
break;
default:
g_assert_not_reached();
}
if (lob > upb) {
error_setg(errp, "Invalid range");
goto out;
}
range_set_bounds(&range, lob, upb);
g_array_append_val(debug_regions, range);
}
out:
g_strfreev(ranges);
}
/* fflush() the log file */
void qemu_log_flush(void)
{
fflush(qemu_logfile);
}
/* Close the log file */
void qemu_log_close(void)
{
if (qemu_logfile) {
if (qemu_logfile != stderr) {
fclose(qemu_logfile);
}
qemu_logfile = NULL;
}
}
const QEMULogItem qemu_log_items[] = {
{ CPU_LOG_TB_OUT_ASM, "out_asm",
"show generated host assembly code for each compiled TB" },
{ CPU_LOG_TB_IN_ASM, "in_asm",
"show target assembly code for each compiled TB" },
{ CPU_LOG_TB_OP, "op",
"show micro ops for each compiled TB" },
{ CPU_LOG_TB_OP_OPT, "op_opt",
"show micro ops after optimization" },
{ CPU_LOG_TB_OP_IND, "op_ind",
"show micro ops before indirect lowering" },
{ CPU_LOG_INT, "int",
"show interrupts/exceptions in short format" },
{ CPU_LOG_EXEC, "exec",
"show trace before each executed TB (lots of logs)" },
{ CPU_LOG_TB_CPU, "cpu",
"show CPU registers before entering a TB (lots of logs)" },
{ CPU_LOG_MMU, "mmu",
"log MMU-related activities" },
{ CPU_LOG_PCALL, "pcall",
"x86 only: show protected mode far calls/returns/exceptions" },
{ CPU_LOG_RESET, "cpu_reset",
"show CPU state before CPU resets" },
{ LOG_UNIMP, "unimp",
"log unimplemented functionality" },
{ LOG_GUEST_ERROR, "guest_errors",
"log when the guest OS does something invalid (eg accessing a\n"
"non-existent register)" },
{ CPU_LOG_PAGE, "page",
"dump pages at beginning of user mode emulation" },
{ CPU_LOG_TB_NOCHAIN, "nochain",
"do not chain compiled TBs so that \"exec\" and \"cpu\" show\n"
"complete traces" },
{ 0, NULL, NULL },
};
static int cmp1(const char *s1, int n, const char *s2)
{
if (strlen(s2) != n) {
return 0;
}
return memcmp(s1, s2, n) == 0;
}
/* takes a comma separated list of log masks. Return 0 if error. */
int qemu_str_to_log_mask(const char *str)
{
const QEMULogItem *item;
int mask;
const char *p, *p1;
p = str;
mask = 0;
for (;;) {
p1 = strchr(p, ',');
if (!p1) {
p1 = p + strlen(p);
}
if (cmp1(p,p1-p,"all")) {
for (item = qemu_log_items; item->mask != 0; item++) {
mask |= item->mask;
}
#ifdef CONFIG_TRACE_LOG
} else if (strncmp(p, "trace:", 6) == 0 && p + 6 != p1) {
trace_enable_events(p + 6);
mask |= LOG_TRACE;
#endif
} else {
for (item = qemu_log_items; item->mask != 0; item++) {
if (cmp1(p, p1 - p, item->name)) {
goto found;
}
}
return 0;
found:
mask |= item->mask;
}
if (*p1 != ',') {
break;
}
p = p1 + 1;
}
return mask;
}
void qemu_print_log_usage(FILE *f)
{
const QEMULogItem *item;
fprintf(f, "Log items (comma separated):\n");
for (item = qemu_log_items; item->mask != 0; item++) {
fprintf(f, "%-15s %s\n", item->name, item->help);
}
#ifdef CONFIG_TRACE_LOG
fprintf(f, "trace:PATTERN enable trace events\n");
fprintf(f, "\nUse \"-d trace:help\" to get a list of trace events.\n\n");
#endif
}