qemu/migration/colo.c
Markus Armbruster 2155ceaf25 error: Remove NULL checks on error_propagate() calls (again)
Patch created mechanically by rerunning:

    $ spatch --sp-file scripts/coccinelle/error_propagate_null.cocci \
             --macro-file scripts/cocci-macro-file.h \
             --use-gitgrep .

Cc: Jens Freimann <jfreimann@redhat.com>
Cc: Hailiang Zhang <zhang.zhanghailiang@huawei.com>
Cc: Juan Quintela <quintela@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20200722084048.1726105-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
2020-10-09 08:36:23 +02:00

937 lines
26 KiB
C

/*
* COarse-grain LOck-stepping Virtual Machines for Non-stop Service (COLO)
* (a.k.a. Fault Tolerance or Continuous Replication)
*
* Copyright (c) 2016 HUAWEI TECHNOLOGIES CO., LTD.
* Copyright (c) 2016 FUJITSU LIMITED
* Copyright (c) 2016 Intel Corporation
*
* This work is licensed under the terms of the GNU GPL, version 2 or
* later. See the COPYING file in the top-level directory.
*/
#include "qemu/osdep.h"
#include "sysemu/sysemu.h"
#include "qapi/error.h"
#include "qapi/qapi-commands-migration.h"
#include "qemu-file-channel.h"
#include "migration.h"
#include "qemu-file.h"
#include "savevm.h"
#include "migration/colo.h"
#include "block.h"
#include "io/channel-buffer.h"
#include "trace.h"
#include "qemu/error-report.h"
#include "qemu/main-loop.h"
#include "qemu/rcu.h"
#include "migration/failover.h"
#include "migration/ram.h"
#ifdef CONFIG_REPLICATION
#include "replication.h"
#endif
#include "net/colo-compare.h"
#include "net/colo.h"
#include "block/block.h"
#include "qapi/qapi-events-migration.h"
#include "qapi/qmp/qerror.h"
#include "sysemu/cpus.h"
#include "sysemu/runstate.h"
#include "net/filter.h"
static bool vmstate_loading;
static Notifier packets_compare_notifier;
/* User need to know colo mode after COLO failover */
static COLOMode last_colo_mode;
#define COLO_BUFFER_BASE_SIZE (4 * 1024 * 1024)
bool migration_in_colo_state(void)
{
MigrationState *s = migrate_get_current();
return (s->state == MIGRATION_STATUS_COLO);
}
bool migration_incoming_in_colo_state(void)
{
MigrationIncomingState *mis = migration_incoming_get_current();
return mis && (mis->state == MIGRATION_STATUS_COLO);
}
static bool colo_runstate_is_stopped(void)
{
return runstate_check(RUN_STATE_COLO) || !runstate_is_running();
}
static void secondary_vm_do_failover(void)
{
/* COLO needs enable block-replication */
#ifdef CONFIG_REPLICATION
int old_state;
MigrationIncomingState *mis = migration_incoming_get_current();
Error *local_err = NULL;
/* Can not do failover during the process of VM's loading VMstate, Or
* it will break the secondary VM.
*/
if (vmstate_loading) {
old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
FAILOVER_STATUS_RELAUNCH);
if (old_state != FAILOVER_STATUS_ACTIVE) {
error_report("Unknown error while do failover for secondary VM,"
"old_state: %s", FailoverStatus_str(old_state));
}
return;
}
migrate_set_state(&mis->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
replication_stop_all(true, &local_err);
if (local_err) {
error_report_err(local_err);
local_err = NULL;
}
/* Notify all filters of all NIC to do checkpoint */
colo_notify_filters_event(COLO_EVENT_FAILOVER, &local_err);
if (local_err) {
error_report_err(local_err);
}
if (!autostart) {
error_report("\"-S\" qemu option will be ignored in secondary side");
/* recover runstate to normal migration finish state */
autostart = true;
}
/*
* Make sure COLO incoming thread not block in recv or send,
* If mis->from_src_file and mis->to_src_file use the same fd,
* The second shutdown() will return -1, we ignore this value,
* It is harmless.
*/
if (mis->from_src_file) {
qemu_file_shutdown(mis->from_src_file);
}
if (mis->to_src_file) {
qemu_file_shutdown(mis->to_src_file);
}
old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
FAILOVER_STATUS_COMPLETED);
if (old_state != FAILOVER_STATUS_ACTIVE) {
error_report("Incorrect state (%s) while doing failover for "
"secondary VM", FailoverStatus_str(old_state));
return;
}
/* Notify COLO incoming thread that failover work is finished */
qemu_sem_post(&mis->colo_incoming_sem);
/* For Secondary VM, jump to incoming co */
if (mis->migration_incoming_co) {
qemu_coroutine_enter(mis->migration_incoming_co);
}
#else
abort();
#endif
}
static void primary_vm_do_failover(void)
{
#ifdef CONFIG_REPLICATION
MigrationState *s = migrate_get_current();
int old_state;
Error *local_err = NULL;
migrate_set_state(&s->state, MIGRATION_STATUS_COLO,
MIGRATION_STATUS_COMPLETED);
/*
* kick COLO thread which might wait at
* qemu_sem_wait(&s->colo_checkpoint_sem).
*/
colo_checkpoint_notify(migrate_get_current());
/*
* Wake up COLO thread which may blocked in recv() or send(),
* The s->rp_state.from_dst_file and s->to_dst_file may use the
* same fd, but we still shutdown the fd for twice, it is harmless.
*/
if (s->to_dst_file) {
qemu_file_shutdown(s->to_dst_file);
}
if (s->rp_state.from_dst_file) {
qemu_file_shutdown(s->rp_state.from_dst_file);
}
old_state = failover_set_state(FAILOVER_STATUS_ACTIVE,
FAILOVER_STATUS_COMPLETED);
if (old_state != FAILOVER_STATUS_ACTIVE) {
error_report("Incorrect state (%s) while doing failover for Primary VM",
FailoverStatus_str(old_state));
return;
}
replication_stop_all(true, &local_err);
if (local_err) {
error_report_err(local_err);
local_err = NULL;
}
/* Notify COLO thread that failover work is finished */
qemu_sem_post(&s->colo_exit_sem);
#else
abort();
#endif
}
COLOMode get_colo_mode(void)
{
if (migration_in_colo_state()) {
return COLO_MODE_PRIMARY;
} else if (migration_incoming_in_colo_state()) {
return COLO_MODE_SECONDARY;
} else {
return COLO_MODE_NONE;
}
}
void colo_do_failover(void)
{
/* Make sure VM stopped while failover happened. */
if (!colo_runstate_is_stopped()) {
vm_stop_force_state(RUN_STATE_COLO);
}
switch (get_colo_mode()) {
case COLO_MODE_PRIMARY:
primary_vm_do_failover();
break;
case COLO_MODE_SECONDARY:
secondary_vm_do_failover();
break;
default:
error_report("colo_do_failover failed because the colo mode"
" could not be obtained");
}
}
#ifdef CONFIG_REPLICATION
void qmp_xen_set_replication(bool enable, bool primary,
bool has_failover, bool failover,
Error **errp)
{
ReplicationMode mode = primary ?
REPLICATION_MODE_PRIMARY :
REPLICATION_MODE_SECONDARY;
if (has_failover && enable) {
error_setg(errp, "Parameter 'failover' is only for"
" stopping replication");
return;
}
if (enable) {
replication_start_all(mode, errp);
} else {
if (!has_failover) {
failover = NULL;
}
replication_stop_all(failover, failover ? NULL : errp);
}
}
ReplicationStatus *qmp_query_xen_replication_status(Error **errp)
{
Error *err = NULL;
ReplicationStatus *s = g_new0(ReplicationStatus, 1);
replication_get_error_all(&err);
if (err) {
s->error = true;
s->has_desc = true;
s->desc = g_strdup(error_get_pretty(err));
} else {
s->error = false;
}
error_free(err);
return s;
}
void qmp_xen_colo_do_checkpoint(Error **errp)
{
Error *err = NULL;
replication_do_checkpoint_all(&err);
if (err) {
error_propagate(errp, err);
return;
}
/* Notify all filters of all NIC to do checkpoint */
colo_notify_filters_event(COLO_EVENT_CHECKPOINT, errp);
}
#endif
COLOStatus *qmp_query_colo_status(Error **errp)
{
COLOStatus *s = g_new0(COLOStatus, 1);
s->mode = get_colo_mode();
s->last_mode = last_colo_mode;
switch (failover_get_state()) {
case FAILOVER_STATUS_NONE:
s->reason = COLO_EXIT_REASON_NONE;
break;
case FAILOVER_STATUS_COMPLETED:
s->reason = COLO_EXIT_REASON_REQUEST;
break;
default:
if (migration_in_colo_state()) {
s->reason = COLO_EXIT_REASON_PROCESSING;
} else {
s->reason = COLO_EXIT_REASON_ERROR;
}
}
return s;
}
static void colo_send_message(QEMUFile *f, COLOMessage msg,
Error **errp)
{
int ret;
if (msg >= COLO_MESSAGE__MAX) {
error_setg(errp, "%s: Invalid message", __func__);
return;
}
qemu_put_be32(f, msg);
qemu_fflush(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Can't send COLO message");
}
trace_colo_send_message(COLOMessage_str(msg));
}
static void colo_send_message_value(QEMUFile *f, COLOMessage msg,
uint64_t value, Error **errp)
{
Error *local_err = NULL;
int ret;
colo_send_message(f, msg, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
qemu_put_be64(f, value);
qemu_fflush(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to send value for message:%s",
COLOMessage_str(msg));
}
}
static COLOMessage colo_receive_message(QEMUFile *f, Error **errp)
{
COLOMessage msg;
int ret;
msg = qemu_get_be32(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Can't receive COLO message");
return msg;
}
if (msg >= COLO_MESSAGE__MAX) {
error_setg(errp, "%s: Invalid message", __func__);
return msg;
}
trace_colo_receive_message(COLOMessage_str(msg));
return msg;
}
static void colo_receive_check_message(QEMUFile *f, COLOMessage expect_msg,
Error **errp)
{
COLOMessage msg;
Error *local_err = NULL;
msg = colo_receive_message(f, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
if (msg != expect_msg) {
error_setg(errp, "Unexpected COLO message %d, expected %d",
msg, expect_msg);
}
}
static uint64_t colo_receive_message_value(QEMUFile *f, uint32_t expect_msg,
Error **errp)
{
Error *local_err = NULL;
uint64_t value;
int ret;
colo_receive_check_message(f, expect_msg, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return 0;
}
value = qemu_get_be64(f);
ret = qemu_file_get_error(f);
if (ret < 0) {
error_setg_errno(errp, -ret, "Failed to get value for COLO message: %s",
COLOMessage_str(expect_msg));
}
return value;
}
static int colo_do_checkpoint_transaction(MigrationState *s,
QIOChannelBuffer *bioc,
QEMUFile *fb)
{
Error *local_err = NULL;
int ret = -1;
colo_send_message(s->to_dst_file, COLO_MESSAGE_CHECKPOINT_REQUEST,
&local_err);
if (local_err) {
goto out;
}
colo_receive_check_message(s->rp_state.from_dst_file,
COLO_MESSAGE_CHECKPOINT_REPLY, &local_err);
if (local_err) {
goto out;
}
/* Reset channel-buffer directly */
qio_channel_io_seek(QIO_CHANNEL(bioc), 0, 0, NULL);
bioc->usage = 0;
qemu_mutex_lock_iothread();
if (failover_get_state() != FAILOVER_STATUS_NONE) {
qemu_mutex_unlock_iothread();
goto out;
}
vm_stop_force_state(RUN_STATE_COLO);
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("run", "stop");
/*
* Failover request bh could be called after vm_stop_force_state(),
* So we need check failover_request_is_active() again.
*/
if (failover_get_state() != FAILOVER_STATUS_NONE) {
goto out;
}
/* Disable block migration */
migrate_set_block_enabled(false, &local_err);
if (local_err) {
goto out;
}
qemu_mutex_lock_iothread();
#ifdef CONFIG_REPLICATION
replication_do_checkpoint_all(&local_err);
if (local_err) {
qemu_mutex_unlock_iothread();
goto out;
}
#else
abort();
#endif
colo_send_message(s->to_dst_file, COLO_MESSAGE_VMSTATE_SEND, &local_err);
if (local_err) {
qemu_mutex_unlock_iothread();
goto out;
}
/* Note: device state is saved into buffer */
ret = qemu_save_device_state(fb);
qemu_mutex_unlock_iothread();
if (ret < 0) {
goto out;
}
/*
* Only save VM's live state, which not including device state.
* TODO: We may need a timeout mechanism to prevent COLO process
* to be blocked here.
*/
qemu_savevm_live_state(s->to_dst_file);
qemu_fflush(fb);
/*
* We need the size of the VMstate data in Secondary side,
* With which we can decide how much data should be read.
*/
colo_send_message_value(s->to_dst_file, COLO_MESSAGE_VMSTATE_SIZE,
bioc->usage, &local_err);
if (local_err) {
goto out;
}
qemu_put_buffer(s->to_dst_file, bioc->data, bioc->usage);
qemu_fflush(s->to_dst_file);
ret = qemu_file_get_error(s->to_dst_file);
if (ret < 0) {
goto out;
}
colo_receive_check_message(s->rp_state.from_dst_file,
COLO_MESSAGE_VMSTATE_RECEIVED, &local_err);
if (local_err) {
goto out;
}
qemu_event_reset(&s->colo_checkpoint_event);
colo_notify_compares_event(NULL, COLO_EVENT_CHECKPOINT, &local_err);
if (local_err) {
goto out;
}
colo_receive_check_message(s->rp_state.from_dst_file,
COLO_MESSAGE_VMSTATE_LOADED, &local_err);
if (local_err) {
goto out;
}
ret = 0;
qemu_mutex_lock_iothread();
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
out:
if (local_err) {
error_report_err(local_err);
}
return ret;
}
static void colo_compare_notify_checkpoint(Notifier *notifier, void *data)
{
colo_checkpoint_notify(data);
}
static void colo_process_checkpoint(MigrationState *s)
{
QIOChannelBuffer *bioc;
QEMUFile *fb = NULL;
int64_t current_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
Error *local_err = NULL;
int ret;
last_colo_mode = get_colo_mode();
if (last_colo_mode != COLO_MODE_PRIMARY) {
error_report("COLO mode must be COLO_MODE_PRIMARY");
return;
}
failover_init_state();
s->rp_state.from_dst_file = qemu_file_get_return_path(s->to_dst_file);
if (!s->rp_state.from_dst_file) {
error_report("Open QEMUFile from_dst_file failed");
goto out;
}
packets_compare_notifier.notify = colo_compare_notify_checkpoint;
colo_compare_register_notifier(&packets_compare_notifier);
/*
* Wait for Secondary finish loading VM states and enter COLO
* restore.
*/
colo_receive_check_message(s->rp_state.from_dst_file,
COLO_MESSAGE_CHECKPOINT_READY, &local_err);
if (local_err) {
goto out;
}
bioc = qio_channel_buffer_new(COLO_BUFFER_BASE_SIZE);
fb = qemu_fopen_channel_output(QIO_CHANNEL(bioc));
object_unref(OBJECT(bioc));
qemu_mutex_lock_iothread();
#ifdef CONFIG_REPLICATION
replication_start_all(REPLICATION_MODE_PRIMARY, &local_err);
if (local_err) {
qemu_mutex_unlock_iothread();
goto out;
}
#else
abort();
#endif
vm_start();
qemu_mutex_unlock_iothread();
trace_colo_vm_state_change("stop", "run");
timer_mod(s->colo_delay_timer,
current_time + s->parameters.x_checkpoint_delay);
while (s->state == MIGRATION_STATUS_COLO) {
if (failover_get_state() != FAILOVER_STATUS_NONE) {
error_report("failover request");
goto out;
}
qemu_event_wait(&s->colo_checkpoint_event);
if (s->state != MIGRATION_STATUS_COLO) {
goto out;
}
ret = colo_do_checkpoint_transaction(s, bioc, fb);
if (ret < 0) {
goto out;
}
}
out:
/* Throw the unreported error message after exited from loop */
if (local_err) {
error_report_err(local_err);
}
if (fb) {
qemu_fclose(fb);
}
/*
* There are only two reasons we can get here, some error happened
* or the user triggered failover.
*/
switch (failover_get_state()) {
case FAILOVER_STATUS_COMPLETED:
qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
COLO_EXIT_REASON_REQUEST);
break;
default:
qapi_event_send_colo_exit(COLO_MODE_PRIMARY,
COLO_EXIT_REASON_ERROR);
}
/* Hope this not to be too long to wait here */
qemu_sem_wait(&s->colo_exit_sem);
qemu_sem_destroy(&s->colo_exit_sem);
/*
* It is safe to unregister notifier after failover finished.
* Besides, colo_delay_timer and colo_checkpoint_sem can't be
* released before unregister notifier, or there will be use-after-free
* error.
*/
colo_compare_unregister_notifier(&packets_compare_notifier);
timer_del(s->colo_delay_timer);
timer_free(s->colo_delay_timer);
qemu_event_destroy(&s->colo_checkpoint_event);
/*
* Must be called after failover BH is completed,
* Or the failover BH may shutdown the wrong fd that
* re-used by other threads after we release here.
*/
if (s->rp_state.from_dst_file) {
qemu_fclose(s->rp_state.from_dst_file);
}
}
void colo_checkpoint_notify(void *opaque)
{
MigrationState *s = opaque;
int64_t next_notify_time;
qemu_event_set(&s->colo_checkpoint_event);
s->colo_checkpoint_time = qemu_clock_get_ms(QEMU_CLOCK_HOST);
next_notify_time = s->colo_checkpoint_time +
s->parameters.x_checkpoint_delay;
timer_mod(s->colo_delay_timer, next_notify_time);
}
void migrate_start_colo_process(MigrationState *s)
{
qemu_mutex_unlock_iothread();
qemu_event_init(&s->colo_checkpoint_event, false);
s->colo_delay_timer = timer_new_ms(QEMU_CLOCK_HOST,
colo_checkpoint_notify, s);
qemu_sem_init(&s->colo_exit_sem, 0);
migrate_set_state(&s->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
colo_process_checkpoint(s);
qemu_mutex_lock_iothread();
}
static void colo_incoming_process_checkpoint(MigrationIncomingState *mis,
QEMUFile *fb, QIOChannelBuffer *bioc, Error **errp)
{
uint64_t total_size;
uint64_t value;
Error *local_err = NULL;
int ret;
qemu_mutex_lock_iothread();
vm_stop_force_state(RUN_STATE_COLO);
trace_colo_vm_state_change("run", "stop");
qemu_mutex_unlock_iothread();
/* FIXME: This is unnecessary for periodic checkpoint mode */
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_REPLY,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
colo_receive_check_message(mis->from_src_file,
COLO_MESSAGE_VMSTATE_SEND, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
qemu_mutex_lock_iothread();
cpu_synchronize_all_states();
ret = qemu_loadvm_state_main(mis->from_src_file, mis);
qemu_mutex_unlock_iothread();
if (ret < 0) {
error_setg(errp, "Load VM's live state (ram) error");
return;
}
value = colo_receive_message_value(mis->from_src_file,
COLO_MESSAGE_VMSTATE_SIZE, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
/*
* Read VM device state data into channel buffer,
* It's better to re-use the memory allocated.
* Here we need to handle the channel buffer directly.
*/
if (value > bioc->capacity) {
bioc->capacity = value;
bioc->data = g_realloc(bioc->data, bioc->capacity);
}
total_size = qemu_get_buffer(mis->from_src_file, bioc->data, value);
if (total_size != value) {
error_setg(errp, "Got %" PRIu64 " VMState data, less than expected"
" %" PRIu64, total_size, value);
return;
}
bioc->usage = total_size;
qio_channel_io_seek(QIO_CHANNEL(bioc), 0, 0, NULL);
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_RECEIVED,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
qemu_mutex_lock_iothread();
vmstate_loading = true;
colo_flush_ram_cache();
ret = qemu_load_device_state(fb);
if (ret < 0) {
error_setg(errp, "COLO: load device state failed");
vmstate_loading = false;
qemu_mutex_unlock_iothread();
return;
}
#ifdef CONFIG_REPLICATION
replication_get_error_all(&local_err);
if (local_err) {
error_propagate(errp, local_err);
vmstate_loading = false;
qemu_mutex_unlock_iothread();
return;
}
/* discard colo disk buffer */
replication_do_checkpoint_all(&local_err);
if (local_err) {
error_propagate(errp, local_err);
vmstate_loading = false;
qemu_mutex_unlock_iothread();
return;
}
#else
abort();
#endif
/* Notify all filters of all NIC to do checkpoint */
colo_notify_filters_event(COLO_EVENT_CHECKPOINT, &local_err);
if (local_err) {
error_propagate(errp, local_err);
vmstate_loading = false;
qemu_mutex_unlock_iothread();
return;
}
vmstate_loading = false;
vm_start();
trace_colo_vm_state_change("stop", "run");
qemu_mutex_unlock_iothread();
if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
return;
}
colo_send_message(mis->to_src_file, COLO_MESSAGE_VMSTATE_LOADED,
&local_err);
error_propagate(errp, local_err);
}
static void colo_wait_handle_message(MigrationIncomingState *mis,
QEMUFile *fb, QIOChannelBuffer *bioc, Error **errp)
{
COLOMessage msg;
Error *local_err = NULL;
msg = colo_receive_message(mis->from_src_file, &local_err);
if (local_err) {
error_propagate(errp, local_err);
return;
}
switch (msg) {
case COLO_MESSAGE_CHECKPOINT_REQUEST:
colo_incoming_process_checkpoint(mis, fb, bioc, errp);
break;
default:
error_setg(errp, "Got unknown COLO message: %d", msg);
break;
}
}
void *colo_process_incoming_thread(void *opaque)
{
MigrationIncomingState *mis = opaque;
QEMUFile *fb = NULL;
QIOChannelBuffer *bioc = NULL; /* Cache incoming device state */
Error *local_err = NULL;
rcu_register_thread();
qemu_sem_init(&mis->colo_incoming_sem, 0);
migrate_set_state(&mis->state, MIGRATION_STATUS_ACTIVE,
MIGRATION_STATUS_COLO);
last_colo_mode = get_colo_mode();
if (last_colo_mode != COLO_MODE_SECONDARY) {
error_report("COLO mode must be COLO_MODE_SECONDARY");
return NULL;
}
failover_init_state();
mis->to_src_file = qemu_file_get_return_path(mis->from_src_file);
if (!mis->to_src_file) {
error_report("COLO incoming thread: Open QEMUFile to_src_file failed");
goto out;
}
/*
* Note: the communication between Primary side and Secondary side
* should be sequential, we set the fd to unblocked in migration incoming
* coroutine, and here we are in the COLO incoming thread, so it is ok to
* set the fd back to blocked.
*/
qemu_file_set_blocking(mis->from_src_file, true);
colo_incoming_start_dirty_log();
bioc = qio_channel_buffer_new(COLO_BUFFER_BASE_SIZE);
fb = qemu_fopen_channel_input(QIO_CHANNEL(bioc));
object_unref(OBJECT(bioc));
qemu_mutex_lock_iothread();
#ifdef CONFIG_REPLICATION
replication_start_all(REPLICATION_MODE_SECONDARY, &local_err);
if (local_err) {
qemu_mutex_unlock_iothread();
goto out;
}
#else
abort();
#endif
vm_start();
trace_colo_vm_state_change("stop", "run");
qemu_mutex_unlock_iothread();
colo_send_message(mis->to_src_file, COLO_MESSAGE_CHECKPOINT_READY,
&local_err);
if (local_err) {
goto out;
}
while (mis->state == MIGRATION_STATUS_COLO) {
colo_wait_handle_message(mis, fb, bioc, &local_err);
if (local_err) {
error_report_err(local_err);
break;
}
if (failover_get_state() == FAILOVER_STATUS_RELAUNCH) {
failover_set_state(FAILOVER_STATUS_RELAUNCH,
FAILOVER_STATUS_NONE);
failover_request_active(NULL);
break;
}
if (failover_get_state() != FAILOVER_STATUS_NONE) {
error_report("failover request");
break;
}
}
out:
/*
* There are only two reasons we can get here, some error happened
* or the user triggered failover.
*/
switch (failover_get_state()) {
case FAILOVER_STATUS_COMPLETED:
qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
COLO_EXIT_REASON_REQUEST);
break;
default:
qapi_event_send_colo_exit(COLO_MODE_SECONDARY,
COLO_EXIT_REASON_ERROR);
}
if (fb) {
qemu_fclose(fb);
}
/* Hope this not to be too long to loop here */
qemu_sem_wait(&mis->colo_incoming_sem);
qemu_sem_destroy(&mis->colo_incoming_sem);
/* Must be called after failover BH is completed */
if (mis->to_src_file) {
qemu_fclose(mis->to_src_file);
mis->to_src_file = NULL;
}
rcu_unregister_thread();
return NULL;
}