qemu/hw/pci-hotplug.c
Paolo Bonzini ce4e7e4661 usb-msd: do not register twice in the boot order
USB mass storage devices are registered twice in the boot order.
To avoid having to keep the two paths in sync, pass the bootindex
property down to the scsi-disk device and let it register itself.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-11-22 10:33:30 +01:00

294 lines
8.3 KiB
C

/*
* QEMU PCI hotplug support
*
* Copyright (c) 2004 Fabrice Bellard
*
* Permission is hereby granted, free of charge, to any person obtaining a copy
* of this software and associated documentation files (the "Software"), to deal
* in the Software without restriction, including without limitation the rights
* to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
* copies of the Software, and to permit persons to whom the Software is
* furnished to do so, subject to the following conditions:
*
* The above copyright notice and this permission notice shall be included in
* all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
* IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
* FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
* THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
* LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
* THE SOFTWARE.
*/
#include "hw.h"
#include "boards.h"
#include "pci.h"
#include "net.h"
#include "pc.h"
#include "monitor.h"
#include "scsi.h"
#include "virtio-blk.h"
#include "qemu-config.h"
#include "blockdev.h"
#if defined(TARGET_I386)
static PCIDevice *qemu_pci_hot_add_nic(Monitor *mon,
const char *devaddr,
const char *opts_str)
{
QemuOpts *opts;
PCIBus *bus;
int ret, devfn;
bus = pci_get_bus_devfn(&devfn, devaddr);
if (!bus) {
monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
return NULL;
}
if (!((BusState*)bus)->allow_hotplug) {
monitor_printf(mon, "PCI bus doesn't support hotplug\n");
return NULL;
}
opts = qemu_opts_parse(qemu_find_opts("net"), opts_str ? opts_str : "", 0);
if (!opts) {
return NULL;
}
qemu_opt_set(opts, "type", "nic");
ret = net_client_init(mon, opts, 0);
if (ret < 0)
return NULL;
if (nd_table[ret].devaddr) {
monitor_printf(mon, "Parameter addr not supported\n");
return NULL;
}
return pci_nic_init(&nd_table[ret], "rtl8139", devaddr);
}
static int scsi_hot_add(Monitor *mon, DeviceState *adapter,
DriveInfo *dinfo, int printinfo)
{
SCSIBus *scsibus;
SCSIDevice *scsidev;
scsibus = DO_UPCAST(SCSIBus, qbus, QLIST_FIRST(&adapter->child_bus));
if (!scsibus || strcmp(scsibus->qbus.info->name, "SCSI") != 0) {
error_report("Device is not a SCSI adapter");
return -1;
}
/*
* drive_init() tries to find a default for dinfo->unit. Doesn't
* work at all for hotplug though as we assign the device to a
* specific bus instead of the first bus with spare scsi ids.
*
* Ditch the calculated value and reload from option string (if
* specified).
*/
dinfo->unit = qemu_opt_get_number(dinfo->opts, "unit", -1);
dinfo->bus = scsibus->busnr;
scsidev = scsi_bus_legacy_add_drive(scsibus, dinfo->bdrv, dinfo->unit,
false, -1);
if (!scsidev) {
return -1;
}
dinfo->unit = scsidev->id;
if (printinfo)
monitor_printf(mon, "OK bus %d, unit %d\n",
scsibus->busnr, scsidev->id);
return 0;
}
void drive_hot_add(Monitor *mon, const QDict *qdict)
{
int dom, pci_bus;
unsigned slot;
int type;
PCIDevice *dev;
DriveInfo *dinfo = NULL;
const char *pci_addr = qdict_get_str(qdict, "pci_addr");
const char *opts = qdict_get_str(qdict, "opts");
dinfo = add_init_drive(opts);
if (!dinfo)
goto err;
if (dinfo->devaddr) {
monitor_printf(mon, "Parameter addr not supported\n");
goto err;
}
type = dinfo->type;
switch (type) {
case IF_SCSI:
if (pci_read_devaddr(mon, pci_addr, &dom, &pci_bus, &slot)) {
goto err;
}
dev = pci_find_device(pci_find_root_bus(dom), pci_bus,
PCI_DEVFN(slot, 0));
if (!dev) {
monitor_printf(mon, "no pci device with address %s\n", pci_addr);
goto err;
}
if (scsi_hot_add(mon, &dev->qdev, dinfo, 1) != 0) {
goto err;
}
break;
case IF_NONE:
monitor_printf(mon, "OK\n");
break;
default:
monitor_printf(mon, "Can't hot-add drive to type %d\n", type);
goto err;
}
return;
err:
if (dinfo)
drive_put_ref(dinfo);
return;
}
static PCIDevice *qemu_pci_hot_add_storage(Monitor *mon,
const char *devaddr,
const char *opts)
{
PCIDevice *dev;
DriveInfo *dinfo = NULL;
int type = -1;
char buf[128];
PCIBus *bus;
int devfn;
if (get_param_value(buf, sizeof(buf), "if", opts)) {
if (!strcmp(buf, "scsi"))
type = IF_SCSI;
else if (!strcmp(buf, "virtio")) {
type = IF_VIRTIO;
} else {
monitor_printf(mon, "type %s not a hotpluggable PCI device.\n", buf);
return NULL;
}
} else {
monitor_printf(mon, "no if= specified\n");
return NULL;
}
if (get_param_value(buf, sizeof(buf), "file", opts)) {
dinfo = add_init_drive(opts);
if (!dinfo)
return NULL;
if (dinfo->devaddr) {
monitor_printf(mon, "Parameter addr not supported\n");
return NULL;
}
} else {
dinfo = NULL;
}
bus = pci_get_bus_devfn(&devfn, devaddr);
if (!bus) {
monitor_printf(mon, "Invalid PCI device address %s\n", devaddr);
return NULL;
}
if (!((BusState*)bus)->allow_hotplug) {
monitor_printf(mon, "PCI bus doesn't support hotplug\n");
return NULL;
}
switch (type) {
case IF_SCSI:
dev = pci_create(bus, devfn, "lsi53c895a");
if (qdev_init(&dev->qdev) < 0)
dev = NULL;
if (dev && dinfo) {
if (scsi_hot_add(mon, &dev->qdev, dinfo, 0) != 0) {
qdev_unplug(&dev->qdev);
dev = NULL;
}
}
break;
case IF_VIRTIO:
if (!dinfo) {
monitor_printf(mon, "virtio requires a backing file/device.\n");
return NULL;
}
dev = pci_create(bus, devfn, "virtio-blk-pci");
if (qdev_prop_set_drive(&dev->qdev, "drive", dinfo->bdrv) < 0) {
qdev_free(&dev->qdev);
dev = NULL;
break;
}
if (qdev_init(&dev->qdev) < 0)
dev = NULL;
break;
default:
dev = NULL;
}
return dev;
}
void pci_device_hot_add(Monitor *mon, const QDict *qdict)
{
PCIDevice *dev = NULL;
const char *pci_addr = qdict_get_str(qdict, "pci_addr");
const char *type = qdict_get_str(qdict, "type");
const char *opts = qdict_get_try_str(qdict, "opts");
/* strip legacy tag */
if (!strncmp(pci_addr, "pci_addr=", 9)) {
pci_addr += 9;
}
if (!opts) {
opts = "";
}
if (!strcmp(pci_addr, "auto"))
pci_addr = NULL;
if (strcmp(type, "nic") == 0) {
dev = qemu_pci_hot_add_nic(mon, pci_addr, opts);
} else if (strcmp(type, "storage") == 0) {
dev = qemu_pci_hot_add_storage(mon, pci_addr, opts);
} else {
monitor_printf(mon, "invalid type: %s\n", type);
}
if (dev) {
monitor_printf(mon, "OK domain %d, bus %d, slot %d, function %d\n",
pci_find_domain(dev->bus),
pci_bus_num(dev->bus), PCI_SLOT(dev->devfn),
PCI_FUNC(dev->devfn));
} else
monitor_printf(mon, "failed to add %s\n", opts);
}
#endif
static int pci_device_hot_remove(Monitor *mon, const char *pci_addr)
{
PCIDevice *d;
int dom, bus;
unsigned slot;
if (pci_read_devaddr(mon, pci_addr, &dom, &bus, &slot)) {
return -1;
}
d = pci_find_device(pci_find_root_bus(dom), bus, PCI_DEVFN(slot, 0));
if (!d) {
monitor_printf(mon, "slot %d empty\n", slot);
return -1;
}
return qdev_unplug(&d->qdev);
}
void do_pci_device_hot_remove(Monitor *mon, const QDict *qdict)
{
pci_device_hot_remove(mon, qdict_get_str(qdict, "pci_addr"));
}