qemu/qapi/job.json
Markus Armbruster 01bed0ff14 qapi: Refill doc comments to conform to conventions
Sweep the entire documentation again.  Last done in commit
209e64d9ed (qapi: Refill doc comments to conform to current
conventions).

To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3".  Finds no
differences.  Comparing with diff is not useful, as the reflown
paragraphs are visible there.

Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240729065220.860163-1-armbru@redhat.com>
[Straightforward conflict with commit 442110bc6f resolved]
2024-08-05 09:31:51 +02:00

277 lines
7.3 KiB
Python

# -*- Mode: Python -*-
# vim: filetype=python
##
# = Background jobs
##
##
# @JobType:
#
# Type of a background job.
#
# @commit: block commit job type, see "block-commit"
#
# @stream: block stream job type, see "block-stream"
#
# @mirror: drive mirror job type, see "drive-mirror"
#
# @backup: drive backup job type, see "drive-backup"
#
# @create: image creation job type, see "blockdev-create" (since 3.0)
#
# @amend: image options amend job type, see "x-blockdev-amend" (since
# 5.1)
#
# @snapshot-load: snapshot load job type, see "snapshot-load" (since
# 6.0)
#
# @snapshot-save: snapshot save job type, see "snapshot-save" (since
# 6.0)
#
# @snapshot-delete: snapshot delete job type, see "snapshot-delete"
# (since 6.0)
#
# Since: 1.7
##
{ 'enum': 'JobType',
'data': ['commit', 'stream', 'mirror', 'backup', 'create', 'amend',
'snapshot-load', 'snapshot-save', 'snapshot-delete'] }
##
# @JobStatus:
#
# Indicates the present state of a given job in its lifetime.
#
# @undefined: Erroneous, default state. Should not ever be visible.
#
# @created: The job has been created, but not yet started.
#
# @running: The job is currently running.
#
# @paused: The job is running, but paused. The pause may be requested
# by either the QMP user or by internal processes.
#
# @ready: The job is running, but is ready for the user to signal
# completion. This is used for long-running jobs like mirror that
# are designed to run indefinitely.
#
# @standby: The job is ready, but paused. This is nearly identical to
# @paused. The job may return to @ready or otherwise be canceled.
#
# @waiting: The job is waiting for other jobs in the transaction to
# converge to the waiting state. This status will likely not be
# visible for the last job in a transaction.
#
# @pending: The job has finished its work, but has finalization steps
# that it needs to make prior to completing. These changes will
# require manual intervention via @job-finalize if auto-finalize
# was set to false. These pending changes may still fail.
#
# @aborting: The job is in the process of being aborted, and will
# finish with an error. The job will afterwards report that it is
# @concluded. This status may not be visible to the management
# process.
#
# @concluded: The job has finished all work. If auto-dismiss was set
# to false, the job will remain in the query list until it is
# dismissed via @job-dismiss.
#
# @null: The job is in the process of being dismantled. This state
# should not ever be visible externally.
#
# Since: 2.12
##
{ 'enum': 'JobStatus',
'data': ['undefined', 'created', 'running', 'paused', 'ready', 'standby',
'waiting', 'pending', 'aborting', 'concluded', 'null' ] }
##
# @JobVerb:
#
# Represents command verbs that can be applied to a job.
#
# @cancel: see @job-cancel
#
# @pause: see @job-pause
#
# @resume: see @job-resume
#
# @set-speed: see @block-job-set-speed
#
# @complete: see @job-complete
#
# @dismiss: see @job-dismiss
#
# @finalize: see @job-finalize
#
# @change: see @block-job-change (since 8.2)
#
# Since: 2.12
##
{ 'enum': 'JobVerb',
'data': ['cancel', 'pause', 'resume', 'set-speed', 'complete', 'dismiss',
'finalize', 'change' ] }
##
# @JOB_STATUS_CHANGE:
#
# Emitted when a job transitions to a different status.
#
# @id: The job identifier
#
# @status: The new job status
#
# Since: 3.0
##
{ 'event': 'JOB_STATUS_CHANGE',
'data': { 'id': 'str',
'status': 'JobStatus' } }
##
# @job-pause:
#
# Pause an active job.
#
# This command returns immediately after marking the active job for
# pausing. Pausing an already paused job is an error.
#
# The job will pause as soon as possible, which means transitioning
# into the PAUSED state if it was RUNNING, or into STANDBY if it was
# READY. The corresponding JOB_STATUS_CHANGE event will be emitted.
#
# Cancelling a paused job automatically resumes it.
#
# @id: The job identifier.
#
# Since: 3.0
##
{ 'command': 'job-pause', 'data': { 'id': 'str' } }
##
# @job-resume:
#
# Resume a paused job.
#
# This command returns immediately after resuming a paused job.
# Resuming an already running job is an error.
#
# @id: The job identifier.
#
# Since: 3.0
##
{ 'command': 'job-resume', 'data': { 'id': 'str' } }
##
# @job-cancel:
#
# Instruct an active background job to cancel at the next opportunity.
# This command returns immediately after marking the active job for
# cancellation.
#
# The job will cancel as soon as possible and then emit a
# JOB_STATUS_CHANGE event. Usually, the status will change to
# ABORTING, but it is possible that a job successfully completes (e.g.
# because it was almost done and there was no opportunity to cancel
# earlier than completing the job) and transitions to PENDING instead.
#
# @id: The job identifier.
#
# Since: 3.0
##
{ 'command': 'job-cancel', 'data': { 'id': 'str' } }
##
# @job-complete:
#
# Manually trigger completion of an active job in the READY state.
#
# @id: The job identifier.
#
# Since: 3.0
##
{ 'command': 'job-complete', 'data': { 'id': 'str' } }
##
# @job-dismiss:
#
# Deletes a job that is in the CONCLUDED state. This command only
# needs to be run explicitly for jobs that don't have automatic
# dismiss enabled.
#
# This command will refuse to operate on any job that has not yet
# reached its terminal state, JOB_STATUS_CONCLUDED. For jobs that
# make use of JOB_READY event, job-cancel or job-complete will still
# need to be used as appropriate.
#
# @id: The job identifier.
#
# Since: 3.0
##
{ 'command': 'job-dismiss', 'data': { 'id': 'str' } }
##
# @job-finalize:
#
# Instructs all jobs in a transaction (or a single job if it is not
# part of any transaction) to finalize any graph changes and do any
# necessary cleanup. This command requires that all involved jobs are
# in the PENDING state.
#
# For jobs in a transaction, instructing one job to finalize will
# force ALL jobs in the transaction to finalize, so it is only
# necessary to instruct a single member job to finalize.
#
# @id: The identifier of any job in the transaction, or of a job that
# is not part of any transaction.
#
# Since: 3.0
##
{ 'command': 'job-finalize', 'data': { 'id': 'str' } }
##
# @JobInfo:
#
# Information about a job.
#
# @id: The job identifier
#
# @type: The kind of job that is being performed
#
# @status: Current job state/status
#
# @current-progress: Progress made until now. The unit is arbitrary
# and the value can only meaningfully be used for the ratio of
# @current-progress to @total-progress. The value is
# monotonically increasing.
#
# @total-progress: Estimated @current-progress value at the completion
# of the job. This value can arbitrarily change while the job is
# running, in both directions.
#
# @error: If this field is present, the job failed; if it is still
# missing in the CONCLUDED state, this indicates successful
# completion.
#
# The value is a human-readable error message to describe the
# reason for the job failure. It should not be parsed by
# applications.
#
# Since: 3.0
##
{ 'struct': 'JobInfo',
'data': { 'id': 'str', 'type': 'JobType', 'status': 'JobStatus',
'current-progress': 'int', 'total-progress': 'int',
'*error': 'str' } }
##
# @query-jobs:
#
# Return information about jobs.
#
# Returns: a list with a @JobInfo for each active job
#
# Since: 3.0
##
{ 'command': 'query-jobs', 'returns': ['JobInfo'] }