Since we *might* have user emulation with softmmu,
use the clearer 'CONFIG_SYSTEM_ONLY' key to check
for system emulation.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
migrate_ignore_shared() is an optimization that avoids copying memory
that is visible and can be mapped on the target. However, a
memory-backend-ram or a memory-backend-memfd block with the RAM_SHARED
flag set is not migrated when migrate_ignore_shared() is true. This is
wrong, because the block has no named backing store, and its contents will
be lost. To fix, ignore shared memory iff it is a named file. Define a
new flag RAM_NAMED_FILE to distinguish this case.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-Id: <1686151116-253260-1-git-send-email-steven.sistare@oracle.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
When we for example have a sparse qcow2 image and discard: unmap is enabled,
there can be a lot of fragmentation in the image after some time. Especially on VM's
that do a lot of writes/deletes.
This causes the qcow2 image to grow even over 110% of its virtual size,
because the free gaps in the image get too small to allocate new
continuous clusters. So it allocates new space at the end of the image.
Disabling discard is not an option, as discard is needed to keep the
incremental backup size as low as possible. Without discard, the
incremental backups would become large, as qemu thinks it's just dirty
blocks but it doesn't know the blocks are unneeded.
So we need to avoid fragmentation but also 'empty' the unneeded blocks in
the image to have a small incremental backup.
In addition, we also want to send the discards further down the stack, so
the underlying blocks are still discarded.
Therefor we introduce a new qcow2 option "discard-no-unref".
When setting this option to true, discards will no longer have the qcow2
driver relinquish cluster allocations. Other than that, the request is
handled as normal: All clusters in range are marked as zero, and, if
pass-discard-request is true, it is passed further down the stack.
The only difference is that the now-zero clusters are preallocated
instead of being unallocated.
This will avoid fragmentation on the qcow2 image.
Fixes: https://gitlab.com/qemu-project/qemu/-/issues/1621
Signed-off-by: Jean-Louis Dupond <jean-louis@dupond.be>
Message-Id: <20230605084523.34134-2-jean-louis@dupond.be>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
It's already confusing that we have two very similar functions for
wrapping the parse of a 64-bit unsigned value, differing mainly on
whether they permit leading '-'. Adjust the signature of parse_uint()
and parse_uint_full() to be like all of qemu_strto*(): put the result
parameter last, use the same types (uint64_t and unsigned long long
have the same width, but are not always the same type), and mark
endptr const (this latter change only affects the rare caller of
parse_uint). Adjust all callers in the tree.
While at it, note that since cutils.c already includes:
QEMU_BUILD_BUG_ON(sizeof(int64_t) != sizeof(long long));
we are guaranteed that the result of parse_uint* cannot exceed
UINT64_MAX (or the build would have failed), so we can drop
pre-existing dead comparisons in opts-visitor.c that were never false.
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Message-Id: <20230522190441.64278-8-eblake@redhat.com>
[eblake: Drop dead code spotted by Markus]
Signed-off-by: Eric Blake <eblake@redhat.com>
The virtio-blk-vhost-vdpa driver in libblkio 1.3.0 supports the fd
passing through the new 'fd' property.
Since now we are using qemu_open() on '@path' if the virtio-blk driver
supports the fd passing, let's announce it.
In this way, the management layer can pass the file descriptor of an
already opened vhost-vdpa character device. This is useful especially
when the device can only be accessed with certain privileges.
Add the '@fdset' feature only when the virtio-blk-vhost-vdpa driver
in libblkio supports it.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Message-id: 20230530071941.8954-3-sgarzare@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
I don't think I can remove the parameters directly but certainly mark
them as deprecated.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20230526165401.574474-7-alex.bennee@linaro.org
Message-Id: <20230524133952.3971948-6-alex.bennee@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add an option for hostmem-file to start the memory object at an offset
into the target file. This is useful if multiple memory objects reside
inside the same target file, such as a device node.
In particular, it's useful to map guest memory directly into /dev/mem
for experimentation.
To make this work consistently, also fix up all places in QEMU that
expect fd offsets to be 0.
Signed-off-by: Alexander Graf <graf@amazon.com>
Message-Id: <20230403221421.60877-1-graf@amazon.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Convert the qmp-spec.txt document to restructuredText.
Notable points about the conversion:
* numbers at the start of section headings are removed, to match
the style of the rest of the manual
* cross-references to other sections or documents are hyperlinked
* various formatting tweaks (notably the examples, which need the
-> and <- prefixed so the QMP code-block lexer will accept them)
* English prose fixed in a few places
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230515162245.3964307-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[.. code-block:: dumbed down to :: to work around CI failure]
Taking account of the new zone append write operation for zoned devices,
BLOCK_ACCT_ZONE_APPEND enum is introduced as other I/O request type (read,
write, flush).
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-3-faithilikerun@gmail.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
We don't allow to use x-colo capability when replication is not
configured. So, no reason to build COLO when replication is disabled,
it's unusable in this case.
Note also that the check in migrate_caps_check() is not the only
restriction: some functions in migration/colo.c will just abort if
called with not defined CONFIG_REPLICATION, for example:
migration_iteration_finish()
case MIGRATION_STATUS_COLO:
migrate_start_colo_process()
colo_process_checkpoint()
abort()
It could probably make sense to have possibility to enable COLO without
REPLICATION, but this requires deeper audit of colo & replication code,
which may be done later if needed.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Acked-by: Dr. David Alan Gilbert <dave@treblig.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230428194928.1426370-4-vsementsov@yandex-team.ru>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Change
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
to
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit, sed
# do eiusmod tempor incididunt ut labore et dolore magna aliqua.
See recent commit "qapi: Relax doc string @name: description
indentation rules" for rationale.
Reflow paragraphs to 70 columns width, and consistently use two spaces
to separate sentences.
To check the generated documentation does not change, I compared the
generated HTML before and after this commit with "wdiff -3". Finds no
differences. Comparing with diff is not useful, as the reflown
paragraphs are visible there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-18-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Lukas Straub <lukasstraub2@web.de>
[Straightforward conflicts in qapi/audio.json qapi/misc-target.json
qapi/run-state.json resolved]
Documentation of dump-guest-memory contains two bulleted lists. The
first one is indented, the second one isn't. Delete the first one's
indentation for a more consistent look.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-9-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
MigrateSetParameters has a TODO comment sitting right behind its doc
comment. I wrote it this way to keep it out of the manual, but that
reason is not obvious.
The previous commit (sphinx/qapidoc: Do not emit TODO sections into
user manuals) lets me move it into the doc comment as a TODO section.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-8-armbru@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
This reverts commit 97cd74f772.
The next commit will hide TODO: sections. See there for rationale.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-6-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
This commit adds a new audiodev backend to allow QEMU to use Pipewire as
both an audio sink and source. This backend is available on most systems
Add Pipewire entry points for QEMU Pipewire audio backend
Add wrappers for QEMU Pipewire audio backend in qpw_pcm_ops()
qpw_write function returns the current state of the stream to pwaudio
and Writes some data to the server for playback streams using pipewire
spa_ringbuffer implementation.
qpw_read function returns the current state of the stream to pwaudio and
reads some data from the server for capture streams using pipewire
spa_ringbuffer implementation. These functions qpw_write and qpw_read
are called during playback and capture.
Added some functions that convert pw audio formats to QEMU audio format
and vice versa which would be needed in the pipewire audio sink and
source functions qpw_init_in() & qpw_init_out().
These methods that implement playback and recording will create streams
for playback and capture that will start processing and will result in
the on_process callbacks to be called.
Built a connection to the Pipewire sound system server in the
qpw_audio_init() method.
Signed-off-by: Dorinda Bassey <dbassey@redhat.com>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Message-Id: <20230417105654.32328-1-dbassey@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This command is used by tooling like libvirt to retrieve a list of
supported CPUs. Each entry returns a CpuDefinitionInfo object that
contains more information about each CPU.
This initial support includes only the name of the CPU and its typename.
Here's what the command produces for the riscv64 target:
$ ./build/qemu-system-riscv64 -S -M virt -display none -qmp stdio
{"QMP": {"version": (...)}
{"execute": "qmp_capabilities", "arguments": {"enable": ["oob"]}}
{"return": {}}
{"execute": "query-cpu-definitions"}
{"return": [
{"name": "rv64", "typename": "rv64-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-e51", "typename": "sifive-e51-riscv-cpu", "static": false, "deprecated": false},
{"name": "any", "typename": "any-riscv-cpu", "static": false, "deprecated": false},
{"name": "x-rv128", "typename": "x-rv128-riscv-cpu", "static": false, "deprecated": false},
{"name": "shakti-c", "typename": "shakti-c-riscv-cpu", "static": false, "deprecated": false},
{"name": "thead-c906", "typename": "thead-c906-riscv-cpu", "static": false, "deprecated": false},
{"name": "sifive-u54", "typename": "sifive-u54-riscv-cpu", "static": false, "deprecated": false}]
}
Next patch will introduce a way to tell whether a given CPU is static or
not.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20230411183511.189632-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'singlestep' member of StatusInfo has never done what the QMP
documentation claims it does. What it actually reports is whether
TCG is working in "one guest instruction per translation block" mode.
We no longer need this field for the HMP 'info status' command, as
we've moved that information to 'info jit'. It seems unlikely that
anybody is monitoring the state of this obscure TCG setting via QMP,
especially since QMP provides no means for changing the setting. So
simply deprecate the field, without providing any replacement.
Until we do eventually delete the member, correct the misstatements
in the QAPI documentation about it.
If we do find that there are users for this, then the most likely way
we would provide replacement access to the information would be to
put the accelerator QOM object at a well-known path such as
/machine/accel, which could then be used with the existing qom-set
and qom-get commands.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 20230417164041.684562-11-peter.maydell@linaro.org
The run-state.json file is missing a trailing newline; add it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20230417164041.684562-10-peter.maydell@linaro.org
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
=vxou
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* Fix compilation issues under Debian 10
* Update kernel headers to 6.3rc5
* Suppress GCC13 false positive in aio_bh_poll()
* Add new x86 feature bits
* Coverity fixes
* More steps towards removing qatomic_mb_set/read
* Fix reduced-phys-bits value for AMD SEV
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmRNC0IUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroNo0wgArWNGKZpbmQ0e5L6ajMvaaPmg4mVL
# a2SJGU0TwTp0fUgZr14z2iwzIpSqQrsqhzTIAzOTs0OICDBPBuNvnRucMa+SVQGO
# Tc89YAwBVDo66dAKhWi+WR9tx7sTFCso0nbsBfczzdnwAw3g1MJ87Ueqc5tlPGBK
# E7YSAD6l4UuogoN5BLU7bSsG/X7bwcyzeUXRB4ik+Z9abWd4DH9qiROnBKLMmBLK
# nAi47h8b8MltWORpO+wf6HtkMKi37SAzl9VLHVuHcRhIdY/JhWCRhYSo0HXhgX66
# JLVkyxFpIndT0dUW/xnqATGez92FRZyTxHbxbAcWM0SoC1jOVfUXB+7Gdw==
# =vxou
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 29 Apr 2023 01:19:14 PM BST
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu:
cpus-common: stop using mb_set/mb_read
async: Suppress GCC13 false positive in aio_bh_poll()
tests: vhost-user-test: release mutex on protocol violation
Update linux headers to v6.3rc5
update-linux-headers.sh: Add missing kernel headers.
Fix libvhost-user.c compilation.
target/i386: Add support for PREFETCHIT0/1 in CPUID enumeration
target/i386: Add support for AVX-NE-CONVERT in CPUID enumeration
target/i386: Add support for AVX-VNNI-INT8 in CPUID enumeration
target/i386: Add support for AVX-IFMA in CPUID enumeration
target/i386: Add support for AMX-FP16 in CPUID enumeration
target/i386: Add support for CMPCCXADD in CPUID enumeration
i386/cpu: Update how the EBX register of CPUID 0x8000001F is set
i386/sev: Update checks and information related to reduced-phys-bits
qemu-options.hx: Update the reduced-phys-bits documentation
qapi, i386/sev: Change the reduced-phys-bits value from 5 to 1
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
A guest only ever experiences, at most, 1 bit of reduced physical
addressing. Change the query-sev-capabilities json comment to use 1.
Fixes: 31dd67f684 ("sev/i386: qmp: add query-sev-capabilities command")
Signed-off-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Message-Id: <cb96d8e09154533af4b4e6988469bc0b32390b65.1664550870.git.thomas.lendacky@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In the QEMU QMP Reference Manual, subsection "Block core (VM
unrelated)" is empty. Its contents is at the end of subsection
"Background jobs" instead. That's because qapi/job.json is included
first from qapi/block-core.json, which makes qapi/job.json's
documentation go between qapi/block-core.json's subsection heading and
contents.
In the QEMU Storage Daemon QMP Reference Manual, section "Block
Devices" contains nothing but an empty subsection "Block core (VM
unrelated)". The latter's contents is at the end section "Socket data
types", along with subsection "Block device exports". Subsection
"Background jobs" is at the end of section "Cryptography". All this
is because storage-daemon/qapi/qapi-schema.json includes modules in a
confused order.
Fix both as follows.
Turn subsection "Background jobs" into a section.
Move it before section "Block devices" in the QEMU QMP Reference
Manual, by including qapi/jobs.json right before qapi/block.json.
Reorder include directives in storage-daemon/qapi/qapi-schema.json to
match the order in qapi/qapi-schema.json, so that the QEMU Storage
Daemon QMP Reference Manual's section structure the QEMU QMP Reference
Manual's.
In the QEMU QMP Reference Manual, qapi/cryptodev.json's documentation
is at the end of section "Virtio devices". That's because it lacks a
section heading, and therefore gets squashed into whatever section
happens to precede it.
Add section heading so it's in section "Cryptography devices".
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230425064223.820979-17-armbru@redhat.com>
Section tags are case sensitive and end with a colon. Screwing up
either gets them interpreted as ordinary paragraph. Fix a few.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-15-armbru@redhat.com>
MemoryDeviceInfoKind, NetClientDriver, and GuestPanicAction mention
some members only in ad hoc since documentation. The generated
documentation shows these members as "Not documented".
Replace by formal member documentation.
Add actual documentation text for the GuestPanicAction members, to
match existing member documentation there. For the others, merely
move existing "since" information.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-14-armbru@redhat.com>
Member / argument documentation of BlockdevAmendOptionsQcow2,
job-resume, and RDMA_GID_STATUS_CHANGED is parsed as ordinary text due
to missing colon or space before the colon. The generated
documentation shows these members / arguments as "Not documented".
The fix is obvious: add missing colons, delete extra spaces.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-13-armbru@redhat.com>
rST parses something like
first line
second line
as a definition list item, where "first line" is the term being
defined by "second line".
This bites us in a couple of places. Here's one:
# @bps_max: total throughput limit during bursts,
# in bytes (Since 1.7)
scripts/qapi/parser.py parses this into an "argument section" with
name "bps_max" and text
total throughput limit during bursts,
in bytes (Since 1.7)
docs/sphinx/qapidoc.py duly passes the text to the rST parser, which
parses it as another definition list. Comes out as nested
definitions: term "bps_max: int (optional)" defined as term "total
throughput limit during bursts," defined as "in bytes (Since 1.7)".
rST truly is the Perl of ASCII-based markups.
Fix by deleting the extra indentation.
Fixes: 26ec4e53f2 (qapi: Fix indent level on doc comments in json files)
Fixes: c0ac533b6f (qapi: Stop using whitespace for alignment in comments)
Fixes: 81ad2964e9 (net/vmnet: add vmnet backends to qapi/net)
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230425064223.820979-11-armbru@redhat.com>
Peter Maydell's commit 100cc4fe0f explains:
rST insists on a blank line before and after a bulleted list [...]
Add some extra blank lines in the doc comments so they're
acceptable rST input.
It missed one in qapi/trace.json.
Paolo Bonzini later added another instance in qapi/stats.json,
providing further, if unintended, evidence for his quip that rST is
the Perl of ASCII-based markups.
Both are parsed as ordinary paragraph, resulting in garbled output.
John Snow missed the need for a blank line when converting
docs/devel/qapi-code-gen.txt to rST.
Add the blank lines we need to get the bullet lists recognized as
such.
Kevin Wolf and Lukas Straub added two more, but indented. Sphinx
recognizes them as (indented) bullet lists. The indentation looks
slightly off.
Insert a blank line and delete the extra indentation.
Fixes: 100cc4fe0f (qapi: Add blank lines before bulleted lists)
Fixes: 467ef823d8 (qmp: add filtering of statistics by target vCPU)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-10-armbru@redhat.com>
[Fix of docs/devel/qapi-code-gen.rst squashed, commit message adjusted]
Documentation section "Stability Considerations" dates back to the
early days of QMP (commit 82a56f0d83 (Monitor: Introduce the
qmp-commands.hx file)). It became largely misleading years ago.
Delete it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-9-armbru@redhat.com>
A few examples neglect to prefix QMP input with '->'. Fix that.
Two examples have extra space after '<-'. Delete it.
A few examples neglect to show output. Provide some. The example
output for query-vcpu-dirty-limit could use further improvement. Add
a TODO comment.
Use "Examples:" instead of "Example:" where multiple examples are
given.
One example section numbers its two examples. Not done elsewhere;
drop.
Another example section separates them with "or". Likewise.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-8-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Documentation suggests @foo is merely shorthand for ``foo``. It's
not, it carries additional meaning: it's a reference to a QAPI schema
name.
Reword the documentation to spell that out.
Fix up the few ``foo`` that should be @foo.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-7-armbru@redhat.com>
Commit 81cbfd5088 (block: remove dirty bitmaps 'status' field)
removed deprecated BlockDirtyInfo member @status. It neglected to
remove references to its enumeration values from the documentation of
its replacements. Do that now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: John Snow <jsnow@redhat.com>
Message-Id: <20230425064223.820979-6-armbru@redhat.com>
Commit de253f1491 (qmp: switch to the new error format on the
wire) removed most error classes. Several later commits mistakenly
mentioned them in documentation. Replace them by the actual error
class there.
Fixes: 44e3e053af (qmp: add interface blockdev-snapshot-delete-internal-sync)
Fixes: f323bc9e8b (qmp: add interface blockdev-snapshot-internal-sync)
Fixes: ba1c048a8f (qapi: Introduce add-fd, remove-fd, query-fdsets)
Fixes: ed61fc10e8 (QAPI: add command for live block commit, 'block-commit')
Fixes: e4c8f004c5 (qapi: convert sendkey)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20230425064223.820979-5-armbru@redhat.com>
query-cpu-definitions returns a list of CpuDefinitionInfo, but
documentation claims CpuDefInfo, which doesn't exist.
query-migrate-capabilities returns a list of
MigrationCapabilityStatus, but documentation claims
MigrationCapabilitiesStatus, which doesn't exist.
balloon and query-balloon can fail with KVMMissingCap, but
documentation claims KvmMissingCap, which doesn't exist.
Fix the documentation.
Fixes: e4e31c6324 (qapi: add query-cpu-definitions command (v2))
Fixes: bbf6da32b5 (Add migration capabilities)
Fixes: d72f326431 (qapi: Convert balloon)
Fixes: 96637bcdf9 (qapi: Convert query-balloon)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <20230425064223.820979-4-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
It has nothing to do with migration, except for the "migrate" in the
name of the command. Move it with the rest of the ui commands.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
There should be no paths from a coroutine_fn to aio_poll, however in
practice coroutine_mixed_fn will call aio_poll in the !qemu_in_coroutine()
path. By marking mixed functions, we can track accurately the call paths
that execute entirely in coroutine context, and find more missing
coroutine_fn markers. This results in more accurate checks that
coroutine code does not end up blocking.
If the marking were extended transitively to all functions that call
these ones, static analysis could be done much more efficiently.
However, this is a start and makes it possible to use vrc's path-based
searches to find potential bugs where coroutine_fns call blocking functions.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
To be able to use the function keys F13 to F24 these should be defined in de keycodemapdb and added to the qapi.
The keycodemapdb is updated in its own repository, this patch enables the use of those keys within qemu.
Signed-off-by: Willem van de Velde <williamvdvelde@gmail.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Currently, the function will simply fail if ancillary fds are not
provided, for ex on unsupported platforms.
This changes the failure from:
{"error": {"class": "GenericError", "desc": "No file descriptor
supplied via SCM_RIGHTS"}}
to:
{"error": {"class": "CommandNotFound", "desc": "The command getfd
has not been found"}}
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
A process with enough capabilities can duplicate a socket to QEMU. Add a
QMP command to import it and add it to the monitor fd list, so it can be
later used by other commands.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230306122751.2355515-9-marcandre.lureau@redhat.com>
Whether it is SPICE, VNC, D-Bus, or the socket chardev, they all
actually expect a socket kind or will fail in different ways at runtime.
Throw an error early if the given 'add_client' fd is not a socket, and
close it to avoid leaks.
This allows to replace the close() call with a more correct & portable
closesocket() version.
(this will allow importing sockets on Windows with a specialized command
in the following patch, while keeping the remaining monitor associated
sockets/add_client code & usage untouched)
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230306122751.2355515-6-marcandre.lureau@redhat.com>
CXL uses PCI AER Internal errors to signal to the host that an error has
occurred. The host can then read more detailed status from the CXL RAS
capability.
For uncorrectable errors: support multiple injection in one operation
as this is needed to reliably test multiple header logging support in an
OS. The equivalent feature doesn't exist for correctable errors, so only
one error need be injected at a time.
Note:
- Header content needs to be manually specified in a fashion that
matches the specification for what can be in the header for each
error type.
Injection via QMP:
{ "execute": "qmp_capabilities" }
...
{ "execute": "cxl-inject-uncorrectable-errors",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"errors": [
{
"type": "cache-address-parity",
"header": [ 3, 4]
},
{
"type": "cache-data-parity",
"header": [0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15,16,17,18,19,20,21,22,23,24,25,26,27,28,29,30,31]
},
{
"type": "internal",
"header": [ 1, 2, 4]
}
]
}}
...
{ "execute": "cxl-inject-correctable-error",
"arguments": {
"path": "/machine/peripheral/cxl-pmem0",
"type": "physical"
} }
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230302133709.30373-9-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now we can use "query-stats" QMP command to query statistics of
crypto devices. (Originally this was designed to show statistics
by '{"execute": "query-cryptodev"}'. Daniel Berrangé suggested that
querying configuration info by "query-cryptodev", and querying
runtime performance info by "query-stats". This makes sense!)
Example:
~# virsh qemu-monitor-command vm '{"execute": "query-stats", \
"arguments": {"target": "cryptodev"} }' | jq
{
"return": [
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 7680
},
...
{
"name": "asym-decrypt-ops",
"value": 32
},
{
"name": "asym-encrypt-ops",
"value": 48
}
],
"qom-path": "/objects/cryptodev0" # support asym only
},
{
"provider": "cryptodev",
"stats": [
{
"name": "asym-verify-bytes",
"value": 0
},
...
{
"name": "sym-decrypt-bytes",
"value": 5376
},
...
],
"qom-path": "/objects/cryptodev1" # support asym/sym
}
],
"id": "libvirt-422"
}
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-12-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add 'throttle-bps' and 'throttle-ops' limitation to set QoS. The
two arguments work with both QEMU command line and QMP command.
Example of QEMU command line:
-object cryptodev-backend-builtin,id=cryptodev1,throttle-bps=1600,\
throttle-ops=100
Example of QMP command:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 100
or cancel limitation:
virsh qemu-monitor-command buster --hmp qom-set /objects/cryptodev1 \
throttle-ops 0
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-11-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev service type in cryptodev.json, then apply this
to related codes. Now we can remove VIRTIO_CRYPTO_SERVICE_xxx
dependence from QEMU cryptodev.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-5-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce cryptodev alg type in cryptodev.json, then apply this to
related codes, and drop 'enum CryptoDevBackendAlgType'.
There are two options:
1, { 'enum': 'QCryptodevBackendAlgType',
'prefix': 'CRYPTODEV_BACKEND_ALG',
'data': ['sym', 'asym']}
Then we can keep 'CRYPTODEV_BACKEND_ALG_SYM' and avoid lots of
changes.
2, changes in this patch(with prefix 'QCRYPTODEV_BACKEND_ALG').
To avoid breaking the rule of QAPI, use 2 here.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-4-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Introduce QCryptodevBackendType in cryptodev.json, also apply this to
related codes. Then we can drop 'enum CryptoDevBackendOptionsType'.
Note that `CRYPTODEV_BACKEND_TYPE_NONE` is *NOT* used by anywhere, so
drop it(no 'none' enum in QCryptodevBackendType).
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20230301105847.253084-2-pizhenwei@bytedance.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
