Upgrading the s390x runner exposed some packages are not available for
it. Add an additional optional stage we only enable for arm64/x86_64
for now.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240426153938.1707723-2-alex.bennee@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We have a bunch of references to 20.04 (which s390x is still on)
although we are basically building on 22.04 now. Clean up the textual
references and use lcitool to generate the full package list to be
consistent.
We can drop "Install packages to build QEMU on Ubuntu on non-s390x" as
when we upgrade the s390x builder to 22.04 it won't need this
workaround.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230503091244.1450613-19-alex.bennee@linaro.org>
One of the main reasons to have custom runners it so we can run KVM
tests. Enable the "kvm" additional group so we can access the feature
on the kernel.
Message-Id: <20230503091244.1450613-5-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reported-by: Peter Maydell <peter.maydell@linaro.org>
This was broken when we moved to using the pre-built packages as we
didn't take care to ensure we used RPMs where required.
NB: I could never get this to complete on my test setup but I suspect
this was down to network connectivity and timeouts while downloading.
Fixes: 69c4befba1 (scripts/ci: update gitlab-runner playbook to use latest runner)
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230315174331.2959-5-alex.bennee@linaro.org>
scripts/ci/org.centos/stream/8/build-environment.yml has a slightly different
list of packages compared to scripts/ci/setup/build-environment.yaml. Make
them the same.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Update the CI playbook so that it is able to prepare a system with a
fresh CentOS Stream 8 install, rather than just support RHEL.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
We were using quite and old runner on our machines and running into
issues with stalling jobs. Gitlab in the meantime now reliably provide
the latest packaged versions of the runner under a stable URL. This
update:
- creates a per-arch subdir for builds
- switches from binary tarballs to deb packages
- re-uses the same binary for the secondary runner
- updates distro check for second to 22.04
Note this script isn't fully idempotent as we end up accumulating
runners especially during testing. However we also want to be able to
run twice with different GitLab keys (e.g. project and personal) so I
think we just have to be mindful of that during testing.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230124180127.1881110-2-alex.bennee@linaro.org>
Changed build-environment.yml to only install spice-server on x86_64 and
aarch64 as this package is only available on those architectures.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220922135516.33627-4-lucas.araujo@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-4-alex.bennee@linaro.org>
XEN hypervisor is only available in ARM and x86, but the yaml only
checked if the architecture is different from s390x, changed it to
a more accurate test.
Tested this change on a Ubuntu 20.04 ppc64le.
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Message-Id: <20220922135516.33627-3-lucas.araujo@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-3-alex.bennee@linaro.org>
ninja-build is missing from the RHEL environment, so a system prepared
with that script would still fail to compile QEMU.
Tested on a Fedora 36
Signed-off-by: Lucas Mateus Castro (alqotel) <lucas.araujo@eldorado.org.br>
Message-Id: <20220922135516.33627-2-lucas.araujo@eldorado.org.br>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20220929114231.583801-2-alex.bennee@linaro.org>
According to our "Supported build platforms" policy, we now do not support
Ubuntu 18.04 anymore. Remove the related container files and entries from
our CI.
Message-Id: <20220516115912.120951-1-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some HW can run multiple architecture profiles so we can install a
secondary runner to build and run tests for those profiles. This
allows setting up secondary service.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Acked-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-9-alex.bennee@linaro.org>
At least the current crop of Aarch64 HW can support running 32 bit EL0
code. Before we can build and test we need a minimal set of packages
installed. We can't use "apt build-dep" because it currently gets
confused trying to keep two sets of build-deps installed at once.
Instead we install a minimal set of libraries that will allow us to
continue.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220225172021.3493923-8-alex.bennee@linaro.org>
This introduces three different parts of a job designed to run
on a custom runner managed by Red Hat. The goals include:
a) propose a model for other organizations that want to onboard
their own runners, with their specific platforms, build
configuration and tests.
b) bring awareness to the differences between upstream QEMU and the
version available under CentOS Stream, which is "A preview of
upcoming Red Hat Enterprise Linux minor and major releases".
c) because of b), it should be easier to identify and reduce the gap
between Red Hat's downstream and upstream QEMU.
The components of this custom job are:
I) OS build environment setup code:
- additions to the existing "build-environment.yml" playbook
that can be used to set up CentOS/EL 8 systems.
- a CentOS Stream 8 specific "build-environment.yml" playbook
that adds to the generic one.
II) QEMU build configuration: a script that will produce binaries with
features as similar as possible to the ones built and packaged on
CentOS stream 8.
III) Scripts that define the minimum amount of testing that the
binaries built with the given configuration (point II) under the
given OS build environment (point I) should be subjected to.
IV) Job definition: GitLab CI jobs that will dispatch the build/test
jobs (see points #II and #III) to the machine specifically
configured according to #I.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Message-Id: <20211111160501.862396-2-crosa@redhat.com>
Message-Id: <20211115142915.3797652-6-alex.bennee@linaro.org>
To have the jobs dispatched to custom runners, gitlab-runner must
be installed, active as a service and properly configured. The
variables file and playbook introduced here should help with those
steps.
The playbook introduced here covers the Linux distributions and
has been primarily tested on OS/machines that the QEMU project
has available to act as runners, namely:
* Ubuntu 20.04 on aarch64
* Ubuntu 18.04 on s390x
But, it should work on all other Linux distributions. Earlier
versions were tested on FreeBSD too, so chances of success are
high.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210630012619.115262-4-crosa@redhat.com>
Message-Id: <20210709143005.1554-4-alex.bennee@linaro.org>
To run basic jobs on custom runners, the environment needs to be
properly set up. The most common requirement is having the right
packages installed.
The playbook introduced here covers the QEMU's project s390x and
aarch64 machines. At the time this is being proposed, those machines
have already had this playbook applied to them.
Signed-off-by: Cleber Rosa <crosa@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Alex Bennée <alex.bennee@linaro.org>
Tested-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Wainer dos Santos Moschetta <wainersm@redhat.com>
Reviewed-by: Willian Rampazzo <willianr@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20210630012619.115262-3-crosa@redhat.com>
Message-Id: <20210709143005.1554-3-alex.bennee@linaro.org>
