Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20231221031652.119827-38-richard.henderson@linaro.org>
This device is a function of VIA south bridge and should allow setting
interrupt routing within that chip. This is implemented in
via_isa_set_irq().
Fixes: eb604411a7
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <5329840e4be6dd8ae143d07cbfe61d8d2d106654.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The chip has 4 pins (called PIRQA-D in VT82C686B and PINTA-D in
VT8231) that are meant to be connected to PCI IRQ lines and allow
routing PCI interrupts to the ISA PIC. Route these in
via_isa_set_irq() to make it possible to share them with internal
functions that can also be routed to the same ISA IRQs.
Fixes: 2fdadd02e6
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <8c4513d8b78fac40e6d4e65a0a4b3a7f2f278a4b.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The VIA integrated south bridge chips combine several functions and
allow routing their interrupts to any of the ISA IRQs also allowing
multiple sources to share the same ISA IRQ. E.g. pegasos2 firmware
configures everything to use IRQ 9 but amigaone routes them to
separate ISA IRQs so the current simplified routing does not work.
Bring back via_isa_set_irq() and change it to take the component that
wants to change an IRQ and keep track of interrupt status of each
source separately and do the mapping to ISA IRQ within the ISA bridge.
This may not handle cases when an ISA IRQ is controlled by devices
directly, not going through via_isa_set_irq() such as serial, parallel
or keyboard but these IRQs being conventionally fixed are not likely
to be change by guests or share with other devices so this does not
cause a problem in practice.
This reverts commit 4e5a20b6da.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Message-ID: <1c3902d4166234bef0a476026441eaac3dd6cda5.1701035944.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
In commit 40f8214fcd ("hw/audio/pcspk: Inline pcspk_init()")
we neglected to give a change to the caller to handle failed
device creation cleanly. Respect the caller API contract and
propagate the error if creating the PC_SPEAKER device ever
failed. This avoid yet another bad API use to be taken as
example and copy / pasted all over the code base.
Reported-by: Bernhard Beschow <shentey@gmail.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231020171509.87839-5-philmd@linaro.org>
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
=ILek
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, cleanups
infrastructure for vhost-vdpa shadow work
piix south bridge rework
reconnect for vhost-user-scsi
dummy ACPI QTG DSM for cxl
tests, cleanups, fixes all over the place
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmU06PMPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRpNIsH/0DlKti86VZLJ6PbNqsnKxoK2gg05TbEhPZU
# pQ+RPDaCHpFBsLC5qsoMJwvaEQFe0e49ZFemw7bXRzBxgmbbNnZ9ArCIPqT+rvQd
# 7UBmyC+kacVyybZatq69aK2BHKFtiIRlT78d9Izgtjmp8V7oyKoz14Esh8wkE+FT
# ypHUa70Addi6alNm6BVkm7bxZxi0Wrmf3THqF8ViYvufzHKl7JR5e17fKWEG0BqV
# 9W7AeHMnzJ7jkTvBGUw7g5EbzFn7hPLTbO4G/VW97k0puS4WRX5aIMkVhUazsRIa
# zDOuXCCskUWuRapiCwY0E4g7cCaT8/JR6JjjBaTgkjJgvo5Y8Eg=
# =ILek
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 22 Oct 2023 02:18:43 PDT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (62 commits)
intel-iommu: Report interrupt remapping faults, fix return value
MAINTAINERS: Add include/hw/intc/i8259.h to the PC chip section
vhost-user: Fix protocol feature bit conflict
tests/acpi: Update DSDT.cxl with QTG DSM
hw/cxl: Add QTG _DSM support for ACPI0017 device
tests/acpi: Allow update of DSDT.cxl
hw/i386/cxl: ensure maxram is greater than ram size for calculating cxl range
vhost-user: fix lost reconnect
vhost-user-scsi: start vhost when guest kicks
vhost-user-scsi: support reconnect to backend
vhost: move and rename the conn retry times
vhost-user-common: send get_inflight_fd once
hw/i386/pc_piix: Make PIIX4 south bridge usable in PC machine
hw/isa/piix: Implement multi-process QEMU support also for PIIX4
hw/isa/piix: Resolve duplicate code regarding PCI interrupt wiring
hw/isa/piix: Reuse PIIX3's PCI interrupt triggering in PIIX4
hw/isa/piix: Rename functions to be shared for PCI interrupt triggering
hw/isa/piix: Reuse PIIX3 base class' realize method in PIIX4
hw/isa/piix: Share PIIX3's base class with PIIX4
hw/isa/piix: Harmonize names of reset control memory regions
...
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
So far multi-process QEMU was only implemented for PIIX3. Move the support into
the base class to achieve feature parity between both device models.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-29-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that both PIIX3 and PIIX4 use piix_set_irq() to trigger PCI IRQs the wiring
in the respective realize methods can be shared, too.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-28-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Speeds up PIIX4 which resolves an old TODO. Also makes PIIX4 compatible with Xen
which relies on pci_bus_fire_intx_routing_notifier() to be fired.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-27-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX4 will get the same optimizations which are already implemented for
PIIX3.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-26-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Resolves duplicate code. Also makes PIIX4 respect the PIIX3 properties which get
added, too. This allows for using PIIX4 in the PC machine.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-25-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Having a common base class will allow for futher code sharing between PIIX3 and
PIIX4. Moreover, it makes PIIX4 implement the acpi-dev-aml-interface.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-24-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
There is no need for having different names here. Having the same name
further allows code to be shared between PIIX3 and PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-23-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIT is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-22-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In the PC machine, the PIC is created in board code to allow it to be
virtualized with various virtualization techniques. So explicitly disable its
creation in the PC machine via a property which defaults to enabled. Once the
PIIX implementations are consolidated this default will keep Malta working
without further ado.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-21-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that the PIIX3 and PIIX4 device models are sufficiently prepared, their
implementations can be merged into one file for further consolidation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-20-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX4 has its own, private PIIX4State structure. PIIX3 has almost the
same structure, provided in a public header. So reuse it and add a
cpu_intr attribute to it which is only used by PIIX4.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-19-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both implementations are the same and will be shared upon merging.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-18-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Rename the "isa" attribute to align it with PIIX3 for consolidation.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-17-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The Malta board, which is the only user of PIIX4, doesn't connect to the
exported interrupt lines. PIIX3 doesn't expose such interrupt lines
either, so remove them for PIIX4 for simplicity and consistency.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-16-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_PIIX3_PCI_DEVICE was the former base class of the Xen and non-Xen variants
of the PIIX3 ISA device models. It will become the base class for the PIIX3 and
PIIX4 device models, so drop the "3" from the type names.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-15-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The power management controller is an integral part of PIIX3 (function 3). So
create it as part of the south bridge.
Note that the ACPI function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-14-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The USB controller is an integral part of PIIX3 (function 2). So create
it as part of the south bridge.
Note that the USB function is optional in QEMU. This is why it gets
object_initialize_child()'ed in realize rather than in instance_init.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-13-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The IDE controller is an integral part of PIIX3 (function 1). So create it as
part of the south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-12-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Makes the south bridges a bit more self-contained and aligns PIIX3 more with
PIIX4. The latter is needed for consolidating the PIIX south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-11-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Thie PIIX3 south bridge implements both the PIC and the ISA bus, so wiring the
interrupts there makes the device model more self-contained. Furthermore, this
allows the ISA interrupts to be wired to internal child devices in
pci_piix3_realize() which will be performed in subsequent patches.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-10-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When the board assigns the ISA IRQs after the device's realize(), internal
devices such as the RTC can't be wired in ich9_lpc_realize() since the qemu_irqs
are still NULL. Fix that by assigning the ISA interrupts before realize().
This change is necessary for PIIX consolidation because PIIX4 wires the RTC
interrupts in its realize() method, so PIIX3 needs to do so as well. Since the
PC and Q35 boards share RTC code, and since PIIX3 needs the change, ICH9 needs
to be adapted as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-9-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
TYPE_PIIX3_DEVICE doesn't instantiate a PIC since it relies on the board to do
so. The "pic" attribute, however, suggests that there is one. Rename the
attribute to reflect that it represents ISA interrupt lines. Use the same naming
convention as in the VIA south bridges as well as in TYPE_I82378.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-8-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Avoid assigning the private member of struct PIIX3State from outside which goes
against best QOM practices. Instead, implement best QOM practice by adding an
"isa-irqs" array property to TYPE_PIIX3_DEVICE and assign it in board code, i.e.
from outside.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Message-Id: <20231007123843.127151-6-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
PIIX_NUM_PIC_IRQS is assumed to be the same as ISA_NUM_IRQS, otherwise
inconsistencies can occur.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231007123843.127151-5-shentey@gmail.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
qbus_new() should not be called on unrealized device.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Message-Id: <20231019071611.98885-9-philmd@linaro.org>
pcspk_init() is a legacy init function, inline and remove it.
Since the device is realized using &error_fatal, use the same
error for setting the "pit" link.
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20231019073307.99608-1-philmd@linaro.org>
This virtual method was always set to the x86-specific pc_madt_cpu_entry(),
even in piix4 which is also used in MIPS. The previous changes use
pc_madt_cpu_entry() otherwise, so madt_cpu can be dropped.
Since pc_madt_cpu_entry() is now only used in x86-specific code, the stub
in hw/acpi/acpi-x86-stub can be removed as well.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230908084234.17642-4-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
As noted in the comment, the PCI INTx lines are supposed to be routed
to *both* the PIC and the I/O APIC. It's just that we don't cope with
the concept of an IRQ being asserted to two *different* pins on the
two irqchips.
So we have this hack of routing to I/O APIC only if the PIRQ routing to
the PIC is disabled. Which seems to work well enough, even when I try
hard to break it with kexec. But should be explicitly documented and
understood.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Message-Id: <112a09643b8191c4eae7d92fa247a861ab90a9ee.camel@infradead.org>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Now that via_isa_set_irq() is unused it can be removed.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230531211043.41724-4-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Resolves circular depencency between IDE function and south bridge.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230531211043.41724-3-shentey@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Allows the struct to be embedded directly into device models without additional
allocation.
Suggested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230612081238.1742-3-shentey@gmail.com>
[PMD: Update MAINTAINERS entry and use SPDX license identifier]
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
During the last patches, TYPE_PIIX3_XEN_DEVICE turned into a clone of
TYPE_PIIX3_DEVICE. Remove this redundancy.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-7-shentey@gmail.com>
Message-Id: <20230403074124.3925-8-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The previous patch unified handling of piix3_write_config() accross the
PIIX3 device models which allows for assigning k->config_write once in the
base class.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-6-shentey@gmail.com>
Message-Id: <20230403074124.3925-7-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
Subscribe to pci_bus_fire_intx_routing_notifier() instead which allows for
having a common piix3_write_config() for the PIIX3 device models.
While at it, move the subscription into machine code to facilitate resolving
TYPE_PIIX3_XEN_DEVICE.
In a possible future followup, pci_bus_fire_intx_routing_notifier() could
be adjusted in such a way that subscribing to it doesn't require
knowledge of the device firing it.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-5-shentey@gmail.com>
Message-Id: <20230403074124.3925-6-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xen_intx_set_irq() doesn't depend on PIIX3State. In order to resolve
TYPE_PIIX3_XEN_DEVICE and in order to make Xen agnostic about the
precise south bridge being used, set up Xen's PCI IRQ handling of PIIX3
in the board.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-4-shentey@gmail.com>
Message-Id: <20230403074124.3925-5-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
This is a preparational patch for the next one to make the following
more obvious:
First, pci_bus_irqs() is now called twice in case of Xen where the
second call overrides the pci_set_irq_fn with the Xen variant.
Second, pci_bus_set_route_irq_fn() is now also called in Xen mode.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-3-shentey@gmail.com>
Message-Id: <20230403074124.3925-4-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
xen_piix3_set_irq() isn't PIIX specific: PIIX is a single PCI device
while xen_piix3_set_irq() maps multiple PCI devices to their respective
IRQs, which is board-specific. Rename xen_piix3_set_irq() to communicate
this.
Also rename XEN_PIIX_NUM_PIRQS to XEN_IOAPIC_NUM_PIRQS since the Xen's
IOAPIC rather than PIIX has this many interrupt routes.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Anthony PERARD <anthony.perard@citrix.com>
Tested-by: Chuck Zmudzinski <brchuckz@aol.com>
Message-Id: <20230312120221.99183-2-shentey@gmail.com>
Message-Id: <20230403074124.3925-2-shentey@gmail.com>
Signed-off-by: Anthony PERARD <anthony.perard@citrix.com>
The attribute isn't used since commit 5c9736789b
"i82378: Cleanup implementation".
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Message-Id: <20230523195608.125820-4-shentey@gmail.com>
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
We are going to require the macro from other files, too, so move
this #define to the header file.
Message-Id: <20230512124033.502654-9-thuth@redhat.com>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Just like in the real hardware (and in PIIX4), create the RTC
controllers in the south bridges.
Signed-off-by: Bernhard Beschow <shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20230519084734.220480-2-shentey@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
=e1yv
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: features, fixes
Several features that landed at the last possible moment:
Passthrough HDM decoder emulation
Refactor cryptodev
RAS error emulation and injection
acpi-index support on non-hotpluggable slots
Dynamically switch to vhost shadow virtqueues at vdpa net migration
Plus a couple of bugfixes that look important to have in the release.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmQJ8TYPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRp37YIAMpQA5/ddmKKz/ABtBMHB5JX/SVYcG+1xkBR
# j9IFYusOfmmDfmgAhv0Qxi9+Wik95lszVZUnphvocSGd0PXH47pK7yv9RZ1ttaYX
# oAbXrGqXo8rUhl1ksQsJ8Iasj2di1BLP0byPuozbRkg1Kkz5TqRd9+hBqSBGEx21
# tsP5708UVCDAriwYYO78Cx0ZasmB9bqqeom5FdEsg9sYJ5aElOOvitp9YO1p2xhU
# gRvhD+k/aqNi+mfOUF7qGDBanxKgx75VV/KU1cjjS9R1vNtwRhfc/26PBrROY00a
# wkZWnAxmzDFKRS6cEfeb+eDGEVjC3IqLAjcFeuAIT/78CwdvIiY=
# =e1yv
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 09 Mar 2023 14:46:14 GMT
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [full]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [full]
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (72 commits)
virtio: fix reachable assertion due to stale value of cached region size
hw/virtio/vhost-user: avoid using unitialized errp
hw/pxb-cxl: Support passthrough HDM Decoders unless overridden
hw/pci: Add pcie_count_ds_port() and pcie_find_port_first() helpers
hw/mem/cxl_type3: Add CXL RAS Error Injection Support.
hw/pci/aer: Make PCIE AER error injection facility available for other emulation to use.
hw/cxl: Fix endian issues in CXL RAS capability defaults / masks
hw/mem/cxl-type3: Add AER extended capability
hw/pci-bridge/cxl_root_port: Wire up MSI
hw/pci-bridge/cxl_root_port: Wire up AER
hw/pci/aer: Add missing routing for AER errors
hw/pci/aer: Implement PCI_ERR_UNCOR_MASK register
pcihp: add ACPI PCI hotplug specific is_hotpluggable_bus() callback
pcihp: move fields enabling hotplug into AcpiPciHpState
acpi: pci: move out ACPI PCI hotplug generator from generic slot generator build_append_pci_bus_devices()
acpi: pci: move BSEL into build_append_pcihp_slots()
acpi: pci: drop BSEL usage when deciding that device isn't hotpluggable
pci: move acpi-index uniqueness check to generic PCI device code
tests: acpi: update expected blobs
tests: acpi: add non zero function device with acpi-index on non-hotpluggble bus
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add basic implementation of the AC'97 sound part used in VIA south
bridge chips. Not all features of the device is emulated, only one
playback channel is supported for now but this is enough to get sound
output from some guests using this device on pegasos2.
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Volker Rümelin <vr_qemu@t-online.de>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <63b99410895312f40e7be479f581da0805e605a1.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
The real VIA south bridges implement a PCI IRQ router which is configured
by the BIOS or the OS. In order to respect these configurations, QEMU
needs to implement it as well. The real chip may allow routing IRQs from
internal functions independently of PCI interrupts but since guests
usually configute it to a single shared interrupt we don't model that
here for simplicity.
Note: The implementation was taken from piix4_set_irq() in hw/isa/piix4.
Suggested-by: Bernhard Beschow <shentey@gmail.com>
Signed-off-by: BALATON Zoltan <balaton@eik.bme.hu>
Reviewed-by: Bernhard Beschow <shentey@gmail.com>
Tested-by: Rene Engel <ReneEngel80@emailn.de>
Message-Id: <fbb016c7d0e19093335c237e15f5f6c62c4393b4.1678188711.git.balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
