object_new() returns cpu with refcnt == 1 and after realize
refcnt == 2*. s390x_new_cpu() as an owner of the first refcnt
should have released it on exit in both cases (on error and
success) to avoid it leaking. Do so for both cases.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-Id: <1508247680-98800-2-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
When we try to start a CPU with a WAIT PSW, we have to take care that
TCG will actually try to continue executing instructions.
We must therefore really only unhalt the CPU if we don't have a WAIT
PSW. Also document the special order for restart interrupts, which
load a new PSW and change the state to operating.
To keep KVM working, simply don't have a look at the WAIT bit when
loading the PSW. Otherwise the behavior of a restart interrupt when
a CPU stopped would be changed.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-31-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Refactor it to use s390_get_feat_block(). Directly write into the mapped
lowcore with stfl and make sure it is really only compiled if needed.
While at it, add an alignment check for STFLE and avoid
potential_page_fault() by properly restoring the CPU state.
Due to s390_get_feat_block(), we will now also indicate the
"Configuration-z-architectural-mode", which is with new SIGP code the
right thing to do.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-30-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Nothing hindering us anymore from unlocking the restart code (used for
NMI).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-29-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we properly implement it, allow to enable it.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-28-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This effectively enables experimental SMP support. Floating interrupts are
still a mess, so allow it but print a big warning. There also seems
to be a problem with CPU hotplug (after the main loop started).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-27-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[CH: changed insn-data.def as pointed out by Richard]
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Thanks to Aurelien Jarno for doing this in his prototype.
We can flush the whole TLB as this should happen really rarely.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-26-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Implement them like KVM implements/handles them. Both can only be
triggered via SIGP instructions. RESET has (almost) the lowest priority if
the CPU is running, and the highest if the CPU is STOPPED. This is handled
in SIGP code already. On delivery, we only have to care about the
"CPU running" scenario.
STOP is defined to be delivered after all other interrupts have been
delivered. Therefore it has the actual lowest priority.
As both can wake up a CPU if sleeping, indicate them correctly to
external code (e.g. cpu_has_work()).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-25-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Mostly analogous to the kernel/KVM version (so I assume the checks are
correct :) ). As a preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-24-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-23-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As preparation for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-22-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Add it as preparation for TCG. Sensing could later be done completely
lockless.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-21-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for TCG, for KVM is this is completely handled in the
kernel.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-20-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
For KVM, the KVM module decides when a STOP can be performed (when the
STOP interrupt can be processed). Factor it out so we can use it
later for TCG.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-19-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use the same code base for TCG, so let's cleanly factor it
out.
The sigp mutex is currently not really needed, as everything is
protected by the iothread mutex. But this could change later, so leave
it in place and initialize it properly from common code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-17-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for moving it out of kvm.c.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-16-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Called from SIGP code to be factored out, so let's move it. Add a
FIXME for TCG code in the future.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-15-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Factor it out into s390_store_status(), to be used also by TCG later on.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-14-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for factoring it out into !kvm code.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-13-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
No need to pass kvm_run. Pass parameters alphabetically ordered.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-12-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
KVM handles the wait PSW itself and triggers a WAIT ICPT in case it
really wants to sleep (disabled wait).
This will later allow us to change the order of loading a restart
interrupt and setting a CPU to OPERATING on SIGP RESTART without
changing KVM behavior.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-11-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
If we encounter a WAIT PSW, we have to halt immediately. Using
cpu_loop_exit() at this point feels wrong. Simply leaving
cs->exception_index set doesn't result in an immediate stop.
This is also necessary to properly handle SIGP STOP interrupts later.
The CPU_INTERRUPT_HALT will be processed immediately and properly set
the CPU to halted (also resetting cs->exception_index to EXCP_HLT)
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-10-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This will now also detect crashes under TCG. We can directly use
cpu->env.psw.addr instead of kvm_run, as we do a cpu_synchronize_state().
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-9-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Going to OPERATING here looks wrong. A CPU should even never be
!OPERATING at this point. Unhalting will already be done in
cpu_handle_halt() if there is work, so we can drop this statement
completely.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-8-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Interrupts can't wake such CPUs up. SIGP from other CPUs has to be used
to toggle the state.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-7-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We can now let go of INTERRUPT_EXT. When cr0 changes, we have to
revalidate if we now have a pending external interrupt, just like
when the PSW (or SYSTEM MASK only) changes.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Currently, enabling/disabling of interrupts is not really supported.
Let's improve interrupt handling code by explicitly checking for
deliverable interrupts only. This is the first step. Checking for
external interrupt subclasses will be done next.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Preparation for new TCG SIGP code. Especially also prepare for
indicating that another external call is already pending.
Take care of interrupt priority.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
There are still some leftovers from old virtio interrupts in there.
Most importantly, we don't have to queue service interrupts anymore.
Just like KVM, we can simply multiplex the SCLP service interrupts and
avoid the queue.
Also, now only valid parameters/cpu_addr will be stored on service
interrupts.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
External interrupts are currently all handled like floating external
interrupts, they are queued. Let's prepare for a split of floating
and local interrupts by turning INTERRUPT_EXT into a mask.
While we can have various floating external interrupts of one kind, there
is usually only one (or a fixed number) of the local external interrupts.
So turn INTERRUPT_EXT into a mask and properly indicate the kind of
external interrupt. Floating interrupts will have to moved out of
one CPU instance later once we have SMP support.
The only floating external interrupts used right now are SERVICE
interrupts, so let's use that name. Following patches will clean up
SERVICE interrupt injection.
This get's rid of the ugly special handling for cpu timer and clock
comparator interrupts. And we really only store the parameters as
defined by the PoP.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928203708.9376-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It is unlikely that we will ever want to call this helper passing
an argument other than the current PC. So just remove the argument,
and use the pc we already get from cpu_get_tb_cpu_state.
This change paves the way to having a common "tb_lookup" function.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Emilio G. Cota <cota@braap.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Just as for external interrupts and I/O interrupts, we need to
initialize mchk_index during cpu reset.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Provides an interface for getting and setting the guest's extended
TOD-Clock via a single ioctl to kvm. If the ioctl fails because it
is not support by kvm, then we fall back to the old style of
retrieving the clock via two ioctls.
Signed-off-by: Collin L. Walling <walling@linux.vnet.ibm.com>
Reviewed-by: Eric Farman <farman@linux.vnet.ibm.com>
Reviewed-by: Claudio Imbrenda <imbrenda@linux.vnet.ibm.com>
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
[split failure change from epoch index change]
Message-Id: <20171004105751.24655-2-borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
[some cosmetic fixes]
Using virtual memory access is wrong and will soon include low-address
protection checks, which is to be bypassed for STFL.
STFL is a privileged instruction and using LowCore requires
!CONFIG_USER_ONLY, so add the ifdef and move the declaration to the
right place.
This was originally part of a bigger STFL(E) refactoring.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170927170027.8539-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Will be handy in the future.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-6-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
core_id is not needed by linux-user, as the core_id a.k.a. CPU address
is only accessible from kernel space.
Therefore, drop next_core_id and make cpu_index get autoassigned again
for linux-user.
While at it, shield core_id and cpuid completely from linux-user. cpuid
can also only be queried from kernel space.
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-5-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Not that it would matter in the near future, but it is actually 2048
bytes, therefore 16384 possible bits.
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-4-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Let's move it into the machine, so we trigger the IRQ after setting
ms->possible_cpus (which SCLP uses to construct the list of
online CPUs).
This also fixes a problem reported by Thomas Huth, whereby qemu can be
crashed using the none machine
qemu-s390x-softmmu -M none -monitor stdio
-> device_add qemu-s390-cpu
Reviewed-by: Christian Borntraeger <borntraeger@de.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170928134609.16985-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We don't wrap addresses in the mmu for the _real case, therefore the
behavior should be unchanged.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-7-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Low address protection checks will be moved into the mmu later.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-6-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
As we properly handle the return address now, we can drop
potential_page_fault().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-5-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Looks like, lurag was not loading 64bit but only 32bit.
As we properly handle the return address now, we can drop
potential_page_fault().
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
This makes it easy to access real addresses (prefix) and in addition
checks for valid memory addresses, which is missing when using e.g.
stl_phys().
We can later reuse it to implement low address protection checks (then
we might even decide to introduce yet another MMU for absolute
addresses, just for handling storage keys and low address protection).
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-3-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
It should have been a >=, but let's directly perform a proper access
check to also be able to deal with hotplugged memory later.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170926183318.12995-2-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
env->psa is a 64bit value, while we copy 4 bytes into the save area,
resulting always in 0 getting stored.
Let's try to reduce such errors by using a proper structure. While at
it, use correct cpu->be conversion (and get_psw_mask()), as we will be
reusing this code for TCG soon.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170922140338.6068-1-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Define default CPU type in generic way in machine class_init
and let common machine code handle cpu_model parsing.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Message-Id: <1505998749-269631-1-git-send-email-imammedo@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
The STFLE bits for the MSA (extension) facilities simply indicate that
the respective instructions can be executed. The QUERY subfunction can then
be used to identify which features exactly are available.
Availability of subfunctions can also vary on real hardware. For now, we
simply implement a CPU model without any available subfunctions except
QUERY (which is always around).
As all MSA functions behave quite similarly, we can use one translation
handler for now. Prepare the code for implementation of actual subfunctions.
At least MSA is helpful for now, as older Linux kernels require this
facility when compiled for a z9 model. Allow to enable the facilities
for the qemu cpu model.
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-4-david@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
We want to use it in another file.
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-3-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
Missing and is used inside Linux in the context of CPACF.
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: David Hildenbrand <david@redhat.com>
Message-Id: <20170920153016.3858-2-david@redhat.com>
Signed-off-by: Cornelia Huck <cohuck@redhat.com>
