Signed-off-by: Song Gao <gaosong@loongson.cn>
Signed-off-by: Xiaojuan Yang <yangxiaojuan@loongson.cn>
Message-Id: <20220624031049.1716097-3-gaosong@loongson.cn>
[rth: Rework extctx frame allocation and locking;
Properly read/write fcc from signal frame.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Fix register zero guarding for auipc and lui
* Ensure bins (mtval) is set correctly
* Minimize the calls to decode_save_opc
* Guard against PMP ranges with a negative size
* Implement mcountinhibit CSR
* Add support for hpmcounters/hpmevents
* Improve PMU implenentation
* Support mcycle/minstret write operation
* Fixup MSECCFG minimum priv check
* Ibex (OpenTitan) fixup priv version
* Fix bug resulting in always using latest priv spec
* Reduce FDT address alignment constraints
* Set minumum priv spec version for mcountinhibit
* AIA update to v0.3 of the spec
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmLA3r8ACgkQIeENKd+X
cFQdFQf6A63mocJxSc0vqMTBNULwgcUKbRbnkazbFS4vtbo/YXioCGaHA8c8trKj
HbZfJv64phOThj7Y8ifLozENjnHX7dHbspPOcWIK9yalvKLA4EB4+OI7LisoL1vg
H4E+9nXSzskaCmJgwSM6WlS0Vf89VxL0CoBb3XqJocSaajstg1XpqrR9anTZlUhl
N712cLze+bOxBHTdjtC5Kxuxj+zmNvcMmuhldIJRdPCW8P5v2yccNVc6+hrE3WUX
9jHGMthS4qC5oVhok14/tPoyL0QTZpU2DXrJPFGUigOvUHoMBfQ3Qhulx3/rGLZv
4SdTD9ASrNWJfa+eyHAPNw//5NxTYA==
=N7VN
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20220703-1' of github.com:alistair23/qemu into staging
Fifth RISC-V PR for QEMU 7.1
* Fix register zero guarding for auipc and lui
* Ensure bins (mtval) is set correctly
* Minimize the calls to decode_save_opc
* Guard against PMP ranges with a negative size
* Implement mcountinhibit CSR
* Add support for hpmcounters/hpmevents
* Improve PMU implenentation
* Support mcycle/minstret write operation
* Fixup MSECCFG minimum priv check
* Ibex (OpenTitan) fixup priv version
* Fix bug resulting in always using latest priv spec
* Reduce FDT address alignment constraints
* Set minumum priv spec version for mcountinhibit
* AIA update to v0.3 of the spec
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCAAdFiEE9sSsRtSTSGjTuM6PIeENKd+XcFQFAmLA3r8ACgkQIeENKd+X
# cFQdFQf6A63mocJxSc0vqMTBNULwgcUKbRbnkazbFS4vtbo/YXioCGaHA8c8trKj
# HbZfJv64phOThj7Y8ifLozENjnHX7dHbspPOcWIK9yalvKLA4EB4+OI7LisoL1vg
# H4E+9nXSzskaCmJgwSM6WlS0Vf89VxL0CoBb3XqJocSaajstg1XpqrR9anTZlUhl
# N712cLze+bOxBHTdjtC5Kxuxj+zmNvcMmuhldIJRdPCW8P5v2yccNVc6+hrE3WUX
# 9jHGMthS4qC5oVhok14/tPoyL0QTZpU2DXrJPFGUigOvUHoMBfQ3Qhulx3/rGLZv
# 4SdTD9ASrNWJfa+eyHAPNw//5NxTYA==
# =N7VN
# -----END PGP SIGNATURE-----
# gpg: Signature made Sun 03 Jul 2022 05:41:43 AM +0530
# gpg: using RSA key F6C4AC46D4934868D3B8CE8F21E10D29DF977054
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: F6C4 AC46 D493 4868 D3B8 CE8F 21E1 0D29 DF97 7054
* tag 'pull-riscv-to-apply-20220703-1' of github.com:alistair23/qemu:
target/riscv: Update default priority table for local interrupts
target/riscv: Remove CSRs that set/clear an IMSIC interrupt file bits
target/riscv: Set minumum priv spec version for mcountinhibit
hw/riscv: boot: Reduce FDT address alignment constraints
target/riscv: Don't force update priv spec version to latest
target/riscv: Ibex: Support priv version 1.11
target/riscv: Fixup MSECCFG minimum priv check
target/riscv: Support mcycle/minstret write operation
target/riscv: Add support for hpmcounters/hpmevents
target/riscv: Implement mcountinhibit CSR
target/riscv: pmu: Make number of counters configurable
target/riscv: pmu: Rename the counters extension to pmu
target/riscv: Implement PMU CSR predicate function for S-mode
target/riscv: Fix PMU CSR predicate function
target/riscv/pmp: guard against PMP ranges with a negative size
target/riscv: Minimize the calls to decode_save_opc
target/riscv: Remove generate_exception_mtval
target/riscv: Set env->bins in gen_exception_illegal
target/riscv: Remove condition guarding register zero for auipc and lui
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The latest AIA draft v0.3.0 defines a relatively simpler scheme for
default priority assignments where:
1) local interrupts 24 to 31 and 48 to 63 are reserved for custom use
and have implementation specific default priority.
2) remaining local interrupts 0 to 23 and 32 to 47 have a recommended
(not mandatory) priority assignments.
We update the default priority table and hviprio mapping as-per above.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Based on architecture review committee feedback, the [m|s|vs]seteienum,
[m|s|vs]clreienum, [m|s|vs]seteipnum, and [m|s|vs]clreipnum CSRs are
removed in the latest AIA draft v0.3.0 specification.
(Refer, https://github.com/riscv/riscv-aia/releases/tag/0.3.0-draft.31)
These CSRs were mostly for software convenience and software can always
use [m|s|vs]iselect and [m|s|vs]ireg CSRs to update the IMSIC interrupt
file bits.
We update the IMSIC CSR emulation as-per above to match the latest AIA
draft specification.
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220616031543.953776-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The minimum priv spec versino for mcountinhibit to v1.11 so that it
is not available for v1.10 (or lower).
Fixes: eab4776b2bad ("target/riscv: Add support for hpmcounters/hpmevents")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220628101737.786681-3-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We previously stored the device tree at a 16MB alignment from the end of
memory (or 3GB). This means we need at least 16MB of memory to be able
to do this. We don't actually need the FDT to be 16MB aligned, so let's
drop it down to 2MB so that we can support systems with less memory,
while also allowing FDT size expansion.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/992
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bin.meng@windriver.com>
Tested-by: Bin Meng <bin.meng@windriver.com>
Message-Id: <20220608062015.317894-1-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The riscv_cpu_realize() sets priv spec version to v1.12 when it is
when "env->priv_ver == 0" (i.e. default v1.10) because the enum
value of priv spec v1.10 is zero.
Due to above issue, the sifive_u machine will see priv spec v1.12
instead of priv spec v1.10.
To fix this issue, we set latest priv spec version (i.e. v1.12)
for base rv64/rv32 cpu and riscv_cpu_realize() will override priv
spec version only when "cpu->cfg.priv_spec != NULL".
Fixes: 7100fe6c24 ("target/riscv: Enable privileged spec version 1.12")
Signed-off-by: Anup Patel <apatel@ventanamicro.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220611080107.391981-2-apatel@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Ibex CPU supports version 1.11 of the priv spec [1], so let's
correct that in QEMU as well.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-3-alistair.francis@opensource.wdc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is nothing in the RISC-V spec that mandates version 1.12 is
required for ePMP and there is currently hardware [1] that implements
ePMP (a draft version though) with the 1.11 priv spec.
1: https://ibex-core.readthedocs.io/en/latest/01_overview/compliance.html
Fixes: a4b2fa4331 ("target/riscv: Introduce privilege version field in the CSR ops.")
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220629233102.275181-2-alistair.francis@opensource.wdc.com>
mcycle/minstret are actually WARL registers and can be written with any
given value. With SBI PMU extension, it will be used to store a initial
value provided from supervisor OS. The Qemu also need prohibit the counter
increment if mcountinhibit is set.
Support mcycle/minstret through generic counter infrastructure.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-8-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
With SBI PMU extension, user can use any of the available hpmcounters to
track any perf events based on the value written to mhpmevent csr.
Add read/write functionality for these csrs.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-7-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As per the privilege specification v1.11, mcountinhibit allows to start/stop
a pmu counter selectively.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-6-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RISC-V privilege specification provides flexibility to implement
any number of counters from 29 programmable counters. However, the QEMU
implements all the counters.
Make it configurable through pmu config parameter which now will indicate
how many programmable counters should be implemented by the cpu.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-5-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The PMU counters are supported via cpu config "Counters" which doesn't
indicate the correct purpose of those counters.
Rename the config property to pmu to indicate that these counters
are performance monitoring counters. This aligns with cpu options for
ARM architecture as well.
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-4-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the predicate function for PMU related CSRs only works if
virtualization is enabled. It also does not check mcounteren bits before
before cycle/minstret/hpmcounterx access.
Support supervisor mode access in the predicate function as well.
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-3-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The predicate function calculates the counter index incorrectly for
hpmcounterx. Fix the counter index to reflect correct CSR number.
Fixes: e39a8320b0 ("target/riscv: Support the Virtual Instruction fault")
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Atish Patra <atishp@rivosinc.com>
Message-Id: <20220620231603.2547260-2-atishp@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
For a TOR entry to match, the stard address must be lower than the end
address. Normally this is always the case, but correct code might still
run into the following scenario:
Initial state:
pmpaddr3 = 0x2000 pmp3cfg = OFF
pmpaddr4 = 0x3000 pmp4cfg = TOR
Execution:
1. write 0x40ff to pmpaddr3
2. write 0x32ff to pmpaddr4
3. set pmp3cfg to NAPOT with a read-modify-write on pmpcfg0
4. set pmp4cfg to NAPOT with a read-modify-write on pmpcfg1
When (2) is emulated, a call to pmp_update_rule() creates a negative
range for pmp4 as pmp4cfg is still set to TOR. And when (3) is emulated,
a call to tlb_flush() is performed, causing pmp_get_tlb_size() to return
a very creatively large TLB size for pmp4. This, in turn, may result in
accesses to non-existent/unitialized memory regions and a fault, so that
(4) ends up never being executed.
This is in m-mode with MPRV unset, meaning that unlocked PMP entries
should have no effect. Therefore such a behavior based on PMP content
is very unexpected.
Make sure no negative PMP range can be created, whether explicitly by
the emulated code or implicitly like the above.
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <3oq0sqs1-67o0-145-5n1s-453o118804q@syhkavp.arg>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The set of instructions that require decode_save_opc for
unwinding is really fairly small -- only insns that can
raise ILLEGAL_INSN at runtime. This includes CSR, anything
that uses a *new* fp rounding mode, and many privileged insns.
Since unwind info is stored as the difference from the
previous insn, storing a 0 for most insns minimizes the
size of the unwind info.
Booting a debian kernel image to the missing rootfs panic yields
- gen code size 22226819/1026886656
+ gen code size 21601907/1026886656
on 41k TranslationBlocks, a savings of 610kB or a bit less than 3%.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-4-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The function doesn't set mtval, it sets badaddr. Move the set
of badaddr directly into gen_exception_inst_addr_mis and use
generate_exception.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-3-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While we set env->bins when unwinding for ILLEGAL_INST,
from e.g. csrrw, we weren't setting it for immediately
illegal instructions.
Add a testcase for mtval via both exception paths.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1060
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220604231004.49990-2-richard.henderson@linaro.org>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 57c108b864 introduced gen_set_gpri(), which already contains
a check for if the destination register is 'zero'. The check in auipc
and lui are then redundant. This patch removes those checks.
Signed-off-by: Víctor Colombo <victor.colombo@eldorado.org.br>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220610165517.47517-1-victor.colombo@eldorado.org.br>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
In the last series, I inadvertantly didn't remove this inline, but did
all the others. Remove it for consistency.
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
These implement both the old-pre INO64 mknod variations, as well as the
now current INO64 variant. Make direct syscall calls for these older
syscalls to avloid too many dependencies.
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Michal Meloun <mmel@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stacey Son <sson@FreeBSD.org>
Signed-off-by: Jung-uk Kim <jkim@FreeBSD.org>
Signed-off-by: Warner Losh <imp@bsdimp.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Canokey core currently using 16 bytes as maximum packet size for
control endpoint, but to run the device in high-speed a 64 bytes
maximum packet size is required according to USB 2.0 specification.
Since we don't acutally need to run the device in high-speed, simply
don't assign high member in USBDesc.
When canokey-qemu is used with xhci, xhci would drive canokey
in high speed mode, since the bcdUSB in canokey-core is 2.1,
yet canokey-core set bMaxPacketSize0 to be 16, this is out
of the spec as the spec said that ``The allowable maximum
control transfer data payload sizes...for high-speed devices,
it is 64 bytes''.
In this case, usb device validation in Windows 10 LTSC 2021
as the guest would fail. It would complain
USB\DEVICE_DESCRIPTOR_VALIDATION_FAILURE.
Note that bcdUSB only identifies the spec version the device
complies, but it has no indication of its speed. So it is
allowed for the device to run in FS but comply the 2.1 spec.
To solve the issue we decided to just drop the high
speed support. This only affects usb-ehci as usb-ehci would
complain speed mismatch when FS device is attached to a HS port.
That's why the .high member was initialized in the first place.
Meanwhile, xhci is not affected as it works well with FS device.
Since everyone is now using xhci, it does no harm to most users.
Suggested-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Signed-off-by: YuanYang Meng <mkfssion@mkfssion.com>
Reviewed-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <20220625142138.19363-1-mkfssion@mkfssion.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
CCID could send zero-length packet (ZLP)
if we invoke two data_in, two packets would be concated
and we could not distinguish them.
The CANOKEY_EMU_EP_CTAPHID is imported from canokey-qemu.h
Reported-by: MkfsSion <myychina28759@gmail.com>
Signed-off-by: Hongren (Zenithal) Zheng <i@zenithal.me>
Message-Id: <YqcqGz0s3+LE42ms@Sun>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
[-NSPasteboard dataForType:] returns an autoreleased NSString,
and callings its release method will result in double-free when
the global autorelease pool is released. Use NSAutoreleasePool to
release it properly.
Signed-off-by: Akihiko Odaki <akihiko.odaki@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20220614212131.94696-1-akihiko.odaki@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The update makes it easier to find and specify devices.
They can only be found by device type name without the id field,
for example, devices of the same type have the same label.
The update also adds a head field,
which is useful for devices that support multiple heads,
such as virtio-gpu.
Signed-off-by: Jianxian Wen <jianxian.wen@verisilicon.com>
Signed-off-by: Lu Gao <lu.gao@verisilicon.com>
Message-Id: <4C23C17B8E87E74E906A25A3254A03F4018FC045B0@SHASXM06.verisilicon.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
And add it to specs/index.rst
Signed-off-by: Simon Sapin <simon.sapin@exyr.org>
Message-Id: <20220625161455.1232954-2-simon.sapin@exyr.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This is a separate commit in order to make reviewing the next one easier.
Signed-off-by: Simon Sapin <simon.sapin@exyr.org>
Message-Id: <20220625161455.1232954-1-simon.sapin@exyr.org>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
* m25p80 improvements (Iris)
* Code cleanup in preparation of multi SoC machine (Peter)
* New MAX31785 model (Mahesh)
* New Qualcomm machines (Jae and Graeme)
* Core I2C slave mode (Klaus)
* Aspeed I2C slave mode for old and new register interface (Peter and Klaus)
* New Aspeed PECI model (Peter)
* Various small fixes
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmK9UfQACgkQUaNDx8/7
7KFYWhAAtlx3aaEacrn/ONNHjk6G9Fxku56gAbaIiuiaIWNOj3/T2frPsnmbO8x8
EKrgUYB8i8PFve/fJYA5vZUzIddPTaHkULZ12JQoGVg0L9hDBbizslN5lJWRXoSv
9r3DF9nahzLKRNvzoBfuKjHDQ2cwHoFgYmKmlYpDcgfmBcl16uzZy8jvxg/Tghur
umH4IJMjeDNz/kLfINoO/m+kuFPVXmbTJNwl8uK5MUVDTgVSqharywWlUizugBVH
StLE+GmBPylTuYXyiOzLTkoGJeeHp3sQ1DmyI4DD83odjnfxa0BGMGDVhD35exXi
9tLY9FgQ4smATuyN0UGAKZTBmzpI+ov0HMzvH4lUMR8i8daBuEet3RVr/DqkOP4h
LEVTRWTaTJip24ohgw4K/b86pI9nTJWVPGV56eZGYmnqufnvf/upNU65/nCsF/xD
i1TdS+zJWxhjgGEepg9cTmxxUlA4jVNNbl6dvAgS5Jr6Igrd1BlCSXjmyhO3NRPZ
bgOuvCb3RyxAY4+/9wphx2/t5X2VIU6R8EAjnh+7nIgBhOQU5SZ6uefFVYZq8xx+
IYEDHj3saiRa4FHmyOgeRxRaQj/Vvs83PPti2rPmJuieqiClJmbE+XfTIamoxVIv
5USlKmMRRVI69MjsjwFi/gOaV/N1EUgcFoYbnvwZ+Md3fg5+70M=
=oUKu
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20220630' of https://github.com/legoater/qemu into staging
aspeed queue:
* m25p80 improvements (Iris)
* Code cleanup in preparation of multi SoC machine (Peter)
* New MAX31785 model (Mahesh)
* New Qualcomm machines (Jae and Graeme)
* Core I2C slave mode (Klaus)
* Aspeed I2C slave mode for old and new register interface (Peter and Klaus)
* New Aspeed PECI model (Peter)
* Various small fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmK9UfQACgkQUaNDx8/7
# 7KFYWhAAtlx3aaEacrn/ONNHjk6G9Fxku56gAbaIiuiaIWNOj3/T2frPsnmbO8x8
# EKrgUYB8i8PFve/fJYA5vZUzIddPTaHkULZ12JQoGVg0L9hDBbizslN5lJWRXoSv
# 9r3DF9nahzLKRNvzoBfuKjHDQ2cwHoFgYmKmlYpDcgfmBcl16uzZy8jvxg/Tghur
# umH4IJMjeDNz/kLfINoO/m+kuFPVXmbTJNwl8uK5MUVDTgVSqharywWlUizugBVH
# StLE+GmBPylTuYXyiOzLTkoGJeeHp3sQ1DmyI4DD83odjnfxa0BGMGDVhD35exXi
# 9tLY9FgQ4smATuyN0UGAKZTBmzpI+ov0HMzvH4lUMR8i8daBuEet3RVr/DqkOP4h
# LEVTRWTaTJip24ohgw4K/b86pI9nTJWVPGV56eZGYmnqufnvf/upNU65/nCsF/xD
# i1TdS+zJWxhjgGEepg9cTmxxUlA4jVNNbl6dvAgS5Jr6Igrd1BlCSXjmyhO3NRPZ
# bgOuvCb3RyxAY4+/9wphx2/t5X2VIU6R8EAjnh+7nIgBhOQU5SZ6uefFVYZq8xx+
# IYEDHj3saiRa4FHmyOgeRxRaQj/Vvs83PPti2rPmJuieqiClJmbE+XfTIamoxVIv
# 5USlKmMRRVI69MjsjwFi/gOaV/N1EUgcFoYbnvwZ+Md3fg5+70M=
# =oUKu
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 30 Jun 2022 01:04:12 PM +0530
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20220630' of https://github.com/legoater/qemu: (27 commits)
hw/misc/aspeed: Add PECI controller
hw/i2c/aspeed: Add new-registers DMA slave mode RX support
hw/i2c/aspeed: add slave device in old register mode
hw/i2c: add asynchronous send
hw/i2c: support multiple masters
hw/i2c/aspeed: Fix MASTER_EN missing error message
hw/i2c/aspeed: Fix DMA len write-enable bit handling
hw/i2c/aspeed: Fix R_I2CD_FUN_CTRL reference
hw/arm/aspeed: firework: add I2C MUXes for VR channels
hw/arm/aspeed: firework: Add Thermal Diodes
hw/arm/aspeed: Add MAX31785 Fan controllers
hw/sensor: add Maxim MAX31785 device
hw/i2c: pmbus: Page #255 is valid page for read requests.
hw/arm/aspeed: add Qualcomm Firework BMC machine
hw/arm/aspeed: add support for the Qualcomm DC-SCM v1 board
aspeed: Remove use of qemu_get_cpu
aspeed: Map unimplemented devices in SoC memory
aspeed: Remove usage of sysbus_mmio_map
aspeed: Add memory property to Aspeed SoC
aspeed: Set CPU memory property explicitly
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This introduces a really basic PECI controller that responses to
commands by always setting the response code to success and then raising
an interrupt to indicate the command is done. This helps avoid getting
hit with constant errors if the driver continuously attempts to send a
command and keeps timing out.
The AST2400 and AST2500 only included registers up to 0x5C, not 0xFC.
They supported PECI 1.1, 2.0, and 3.0. The AST2600 and AST1030 support
PECI 4.0, which includes more read/write buffer registers from 0x80 to
0xFC to support 64-byte mode.
This patch doesn't attempt to handle that, or to create a different
version of the controller for the different generations, since it's only
implementing functionality that is common to all generations.
The basic sequence of events is that the firmware will read and write to
various registers and then trigger a command by setting the FIRE bit in
the command register (similar to the I2C controller).
Then the firmware waits for an interrupt from the PECI controller,
expecting the interrupt status register to be filled in with info on
what happened. If the command was transmitted and received successfully,
then response codes from the host CPU will be found in the data buffer
registers.
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-12-me@pjd.dev>
[ clg: s/sysbus_mmio_map/aspeed_mmio_map/ ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This commit adds support for DMA RX in slave mode while using the new
register set in the AST2600 and AST1030. This patch also pretty much
assumes packet mode is enabled, I'm not sure if this will work in DMA
step mode.
This is particularly useful for testing IPMB exchanges between Zephyr
and external devices, which requires multi-master I2C support and DMA in
the new register mode, because the Zephyr drivers from Aspeed use DMA in
the new mode by default. The Zephyr drivers are also using packet mode.
The typical sequence of events for receiving data in DMA slave + packet
mode is that the Zephyr firmware will configure the slave address
register with an address to receive on and configure the bus's function
control register to enable master mode and slave mode simultaneously at
startup, before any transfers are initiated.
RX DMA is enabled in the slave mode command register, and the slave RX
DMA buffer address and slave RX DMA buffer length are set. TX DMA is not
covered in this patch.
When the Aspeed I2C controller receives data from some other I2C master,
it will reset the I2CS_DMA_LEN RX_LEN value to zero, then buffer
incoming data in the RX DMA buffer while incrementing the I2CC_DMA_ADDR
address counter and decrementing the I2CC_DMA_LEN counter. It will also
update the I2CS_DMA_LEN RX_LEN value along the way.
Once all the data has been received, the bus controller will raise an
interrupt indicating a packet command was completed, the slave address
matched, a normal stop condition was seen, and the transfer was an RX
operation.
If the master sent a NACK instead of a normal stop condition, or the
transfer timed out, then a slightly different set of interrupt status
values would be set. Those conditions are not handled in this commit.
The Zephyr firmware then collects data from the RX DMA buffer and clears
the status register by writing the PKT_MODE_EN bit to the status
register. In packet mode, clearing the packet mode interrupt enable bit
also clears most of the other interrupt bits automatically (except for a
few bits above it).
Note: if the master transmit or receive functions were in use
simultaneously with the slave mode receive functionality, then the
master mode functions may have raised the interrupt line for the bus
before the DMA slave transfer is complete. It's important to have the
slave's interrupt status register clear throughout the receive
operation, and if the slave attempts to raise the interrupt before the
master interrupt status is cleared, then it needs to re-raise the
interrupt once the master interrupt status is cleared. (And vice-versa).
That's why in this commit, when the master interrupt status is cleared
and the interrupt line is lowered, we call the slave interrupt _raise_
function, to see if the interrupt was pending. (And again, vice-versa).
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-8-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add slave mode functionality for the Aspeed I2C controller in old
register mode. This is implemented by realizing an I2C slave device
owned by the I2C controller and attached to its own bus.
The I2C slave device only implements asynchronous sends on the bus, so
slaves not supporting that will not be able to communicate with it.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg: checkpatch fixes ]
Message-Id: <20220601210831.67259-6-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-7-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Add an asynchronous version of i2c_send() that requires the slave to
explicitly acknowledge on the bus with i2c_ack().
The current master must use the new i2c_start_send_async() to indicate
that it wants to do an asynchronous transfer. This allows the i2c core
to check if the target slave supports this or not. This approach relies
on adding a new enum i2c_event member, which is why a bunch of other
devices needs changes in their event handling switches.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
Message-Id: <20220601210831.67259-5-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-6-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Allow slaves to master the bus by registering a bottom halve. If the bus
is busy, the bottom half is queued up. When a slave has succesfully
mastered the bus, the bottom half is scheduled.
Signed-off-by: Klaus Jensen <k.jensen@samsung.com>
[ clg : - fixed typos in commit log ]
Message-Id: <20220601210831.67259-4-its@irrelevant.dk>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220630045133.32251-5-me@pjd.dev>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
aspeed_i2c_bus_is_master is checking if master mode is enabled in the I2C
bus controller's function-control register, not that slave mode is enabled
or something. The error here is that the guest is trying to trigger an I2C
master mode command while master mode is not enabled.
Fixes: ba2cccd64e ("aspeed: i2c: Add new mode support")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-4-me@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
I noticed i2c rx transfers were getting shortened to "1" on Zephyr. It
seems to be because the Zephyr i2c driver sets the RX DMA len with the
RX field write-enable bit set (bit 31) to avoid a read-modify-write. [1]
/* 0x1C : I2CM Master DMA Transfer Length Register */
I think we should be checking the write-enable bits on the incoming
value, not checking the register array. I'm not sure we're even writing
the write-enable bits to the register array, actually.
[1] db3dbcc9c5/drivers/i2c/i2c_aspeed.c (L145-L148)
Fixes: ba2cccd64e ("aspeed: i2c: Add new mode support")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-3-me@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
