Currently query-dirty-rate uses QEMU_CLOCK_REALTIME as
the source for start-time field. This translates to
clock_gettime(CLOCK_MONOTONIC), i.e. number of seconds
since host boot. This is not very useful. The only
reasonable use case of start-time I can imagine is to
check whether previously completed measurements are
too old or not. But this makes sense only if start-time
is reported as host wall-clock time.
This patch replaces source of start-time from
QEMU_CLOCK_REALTIME to QEMU_CLOCK_HOST.
Signed-off-by: Andrei Gudkov <gudkov.andrei@huawei.com>
Reviewed-by: Hyman Huang <yong.huang@smartx.com>
Message-Id: <399861531e3b24a1ecea2ba453fb2c3d129fb03a.1693905328.git.gudkov.andrei@huawei.com>
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
For both save/load we actually share the logic on deciding whether a field
should exist. Merge the checks into a helper and use it for both save and
load. When doing so, add documentations and reformat the code to make it
much easier to read.
The real benefit here (besides code cleanups) is we add a trace-point for
this; this is a known spot where we can easily break migration
compatibilities between binaries, and this trace point will be critical for
us to identify such issues.
For example, this will be handy when debugging things like:
https://gitlab.com/qemu-project/qemu/-/issues/932
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230906204722.514474-1-peterx@redhat.com>
Allow an offset option to be specified as part of the file URI, in
the form "file:filename,offset=offset", where offset accepts the common
size suffixes, or the 0x prefix, but not both. Migration data is written
to and read from the file starting at offset. If unspecified, it defaults
to 0.
This is needed by libvirt to store its own data at the head of the file.
Suggested-by: Daniel P. Berrange <berrange@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-3-git-send-email-steven.sistare@oracle.com>
Extend the migration URI to support file:<filename>. This can be used for
any migration scenario that does not require a reverse path. It can be
used as an alternative to 'exec:cat > file' in minimized containers that
do not contain /bin/sh, and it is easier to use than the fd:<fdname> URI.
It can be used in HMP commands, and as a qemu command-line parameter.
For best performance, guest ram should be shared and x-ignore-shared
should be true, so guest pages are not written to the file, in which case
the guest may remain running. If ram is not so configured, then the user
is advised to stop the guest first. Otherwise, a busy guest may re-dirty
the same page, causing it to be appended to the file multiple times,
and the file may grow unboundedly. That issue is being addressed in the
"fixed-ram" patch series.
Signed-off-by: Steve Sistare <steven.sistare@oracle.com>
Tested-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Michael Galaxy <mgalaxy@akamai.com>
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <1694182931-61390-2-git-send-email-steven.sistare@oracle.com>
Previously, we got a confusion error that complains
the RDMAControlHeader.repeat:
qemu-system-x86_64: rdma: Too many requests in this message (3638950032).Bailing.
Actually, it's caused by an unexpected RDMAControlHeader.type.
After this patch, error will become:
qemu-system-x86_64: Unknown control message QEMU FILE
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230926100103.201564-2-lizhijian@fujitsu.com>
A few code paths exist in the source code,where a migration is
marked as failed via MIGRATION_STATUS_FAILED, but the failure happens
outside of migration.c
In such cases, an error_report() call is made, however the current
MigrationState is never updated with the error description, and hence
clients like libvirt never know the actual reason for the failure.
This patch covers such cases outside of migration.c and updates the
error description at the appropriate places.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-3-tejus.gk@nutanix.com>
Currently, a few code paths exist in the function vmstate_save_state_v,
which ultimately leads to a migration failure. However, an update in the
current MigrationState for the error description is never done.
vmstate.c somehow doesn't seem to allow the use of migrate_set_error due
to some dependencies for unit tests. Hence, this patch introduces a new
function vmstate_save_state_with_err, which will eventually propagate
the error message to savevm.c where a migrate_set_error call can be
eventually done.
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20231003065538.244752-2-tejus.gk@nutanix.com>
When we sent a page through QEMUFile hooks (RDMA) there are three
posiblities:
- We are not using RDMA. return RAM_SAVE_CONTROL_DELAYED and
control_save_page() returns false to let anything else to proceed.
- There is one error but we are using RDMA. Then we return a negative
value, control_save_page() needs to return true.
- Everything goes well and RDMA start the sent of the page
asynchronously. It returns RAM_SAVE_CONTROL_DELAYED and we need to
return 1 for ram_save_page_legacy.
Clear?
I know, I know, the interface is as bad as it gets. I think that now
it is a bit clearer, but this needs to be done some other way.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-16-quintela@redhat.com>
After this change, nothing abuses QEMUFile to account for data
transferrefd during migration.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-15-quintela@redhat.com>
RDMA protocol is completely asynchronous, so in qemu_rdma_save_page()
they "invent" that a byte has been transferred. And then they call
qemu_file_credit_transfer() and ram_transferred_add() with that byte.
Just remove that calls as nothing has been sent.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-14-quintela@redhat.com>
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-13-quintela@redhat.com>
Remove the one in control_save_page().
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-12-quintela@redhat.com>
Just create a variable for it, the same way that multifd does. This
way it is safe to use for other thread, etc, etc.
Reviewed-by: Leonardo Bras <leobras@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230515195709.63843-11-quintela@redhat.com>
We only care about the amount of bytes transferred. Flushing is done
by the system somewhere else.
Reviewed-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230530183941.7223-4-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
In the function qmp_migrate(), yank_unregister_instance() gets called
twice which isn't required. Hence, refactoring it so that it gets called
during the local_error cleanup.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Acked-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-3-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Local variables shadowing other local variables or parameters make the
code needlessly hard to understand. Tracked down with -Wshadow=local.
Clean up: delete inner declarations when they are actually redundant,
else rename variables.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20230921121312.1301864-3-armbru@redhat.com>
qemu_rdma_save_page() reports polling error with error_report(), then
succeeds anyway. This is because the variable holding the polling
status *shadows* the variable the function returns. The latter
remains zero.
Broken since day one, and duplicated more recently.
Fixes: 2da776db48 (rdma: core logic)
Fixes: b390afd8c5 (migration/rdma: Fix out of order wrid)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Message-ID: <20230921121312.1301864-2-armbru@redhat.com>
Now that the return path thread is allowed to finish during a paused
migration, we can move the cleanup of the QEMUFiles to the main
migration thread.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-9-farosas@suse.de>
Replace the return path retry logic with finishing and restarting the
thread. This fixes a race when resuming the migration that leads to a
segfault.
Currently when doing postcopy we consider that an IO error on the
return path file could be due to a network intermittency. We then keep
the thread alive but have it do cleanup of the 'from_dst_file' and
wait on the 'postcopy_pause_rp' semaphore. When the user issues a
migrate resume, a new return path is opened and the thread is allowed
to continue.
There's a race condition in the above mechanism. It is possible for
the new return path file to be setup *before* the cleanup code in the
return path thread has had a chance to run, leading to the *new* file
being closed and the pointer set to NULL. When the thread is released
after the resume, it tries to dereference 'from_dst_file' and crashes:
Thread 7 "return path" received signal SIGSEGV, Segmentation fault.
[Switching to Thread 0x7fffd1dbf700 (LWP 9611)]
0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
154 return f->last_error;
(gdb) bt
#0 0x00005555560e4893 in qemu_file_get_error_obj (f=0x0, errp=0x0) at ../migration/qemu-file.c:154
#1 0x00005555560e4983 in qemu_file_get_error (f=0x0) at ../migration/qemu-file.c:206
#2 0x0000555555b9a1df in source_return_path_thread (opaque=0x555556e06000) at ../migration/migration.c:1876
#3 0x000055555602e14f in qemu_thread_start (args=0x55555782e780) at ../util/qemu-thread-posix.c:541
#4 0x00007ffff38d76ea in start_thread (arg=0x7fffd1dbf700) at pthread_create.c:477
#5 0x00007ffff35efa6f in clone () at ../sysdeps/unix/sysv/linux/x86_64/clone.S:95
Here's the race (important bit is open_return_path happening before
migration_release_dst_files):
migration | qmp | return path
--------------------------+-----------------------------+---------------------------------
qmp_migrate_pause()
shutdown(ms->to_dst_file)
f->last_error = -EIO
migrate_detect_error()
postcopy_pause()
set_state(PAUSED)
wait(postcopy_pause_sem)
qmp_migrate(resume)
migrate_fd_connect()
resume = state == PAUSED
open_return_path <-- TOO SOON!
set_state(RECOVER)
post(postcopy_pause_sem)
(incoming closes to_src_file)
res = qemu_file_get_error(rp)
migration_release_dst_files()
ms->rp_state.from_dst_file = NULL
post(postcopy_pause_rp_sem)
postcopy_pause_return_path_thread()
wait(postcopy_pause_rp_sem)
rp = ms->rp_state.from_dst_file
goto retry
qemu_file_get_error(rp)
SIGSEGV
-------------------------------------------------------------------------------------------
We can keep the retry logic without having the thread alive and
waiting. The only piece of data used by it is the 'from_dst_file' and
it is only allowed to proceed after a migrate resume is issued and the
semaphore released at migrate_fd_connect().
Move the retry logic to outside the thread by waiting for the thread
to finish before pausing the migration.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-8-farosas@suse.de>
We'll start calling the await_return_path_close_on_source() function
from other parts of the code, so move all of the related checks and
tracepoints into it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-7-farosas@suse.de>
This file is owned by the return path thread which is already doing
cleanup.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-6-farosas@suse.de>
It's not safe to call qemu_file_shutdown() on the to_dst_file without
first checking for the file's presence under the lock. The cleanup of
this file happens at postcopy_pause() and migrate_fd_cleanup() which
are not necessarily running in the same thread as migrate_fd_cancel().
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-5-farosas@suse.de>
We cannot call qemu_file_shutdown() on the return path file without
taking the file lock. The return path thread could be running it's
cleanup code and have just cleared the from_dst_file pointer.
Checking ms->to_dst_file for errors could also race with
migrate_fd_cleanup() which clears the to_dst_file pointer.
Protect both accesses by taking the file lock.
This was caught by inspection, it should be rare, but the next patches
will start calling this code from other places, so let's do the
correct thing.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-4-farosas@suse.de>
We don't need to set the rp_state.error right after a shutdown because
qemu_file_shutdown() always sets the QEMUFile error, so the return
path thread would have seen it and set the rp error itself.
Setting the error outside of the thread is also racy because the
thread could clear it after we set it.
Reviewed-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-3-farosas@suse.de>
We hit intermit CI issue on failing at migration-test over the unit test
preempt/plain:
qemu-system-x86_64: Unable to read from socket: Connection reset by peer
Memory content inconsistency at 5b43000 first_byte = bd last_byte = bc current = 4f hit_edge = 1
**
ERROR:../tests/qtest/migration-test.c:300:check_guests_ram: assertion failed: (bad == 0)
(test program exited with status code -6)
Fabiano debugged into it and found that the preempt thread can quit even
without receiving all the pages, which can cause guest not receiving all
the pages and corrupt the guest memory.
To make sure preempt thread finished receiving all the pages, we can rely
on the page_requested_count being zero because preempt channel will only
receive requested page faults. Note, not all the faulted pages are required
to be sent via the preempt channel/thread; imagine the case when a
requested page is just queued into the background main channel for
migration, the src qemu will just still send it via the background channel.
Here instead of spinning over reading the count, we add a condvar so the
main thread can wait on it if that unusual case happened, without burning
the cpu for no good reason, even if the duration is short; so even if we
spin in this rare case is probably fine. It's just better to not do so.
The condvar is only used when that special case is triggered. Some memory
ordering trick is needed to guarantee it from happening (against the
preempt thread status field), so the main thread will always get a kick
when that triggers correctly.
Closes: https://gitlab.com/qemu-project/qemu/-/issues/1886
Debugged-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20230918172822.19052-2-farosas@suse.de>
Add a new .save_prepare() handler to struct SaveVMHandlers. This handler
is called early, even before migration starts, and can be used by
devices to perform early checks.
Refactor migrate_init() to be able to return errors and call
.save_prepare() from there.
Suggested-by: Peter Xu <peterx@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Initialization of mig_stats, compression_counters and VFIO bytes
transferred is hard-coded in migration code path and snapshot code path.
Make the code cleaner by initializing them in migrate_init().
Suggested-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The functions in target.c are not static, yet they don't have a proper
migration prefix. Add such prefix.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The ongoing QEMU multi-queue block layer effort makes it possible for multiple
threads to process I/O in parallel. The nbd block driver is not compatible with
the multi-queue block layer yet because QIOChannel cannot be used easily from
coroutines running in multiple threads. This series changes the QIOChannel API
to make that possible.
In the current API, calling qio_channel_attach_aio_context() sets the
AioContext where qio_channel_yield() installs an fd handler prior to yielding:
qio_channel_attach_aio_context(ioc, my_ctx);
...
qio_channel_yield(ioc); // my_ctx is used here
...
qio_channel_detach_aio_context(ioc);
This API design has limitations: reading and writing must be done in the same
AioContext and moving between AioContexts involves a cumbersome sequence of API
calls that is not suitable for doing on a per-request basis.
There is no fundamental reason why a QIOChannel needs to run within the
same AioContext every time qio_channel_yield() is called. QIOChannel
only uses the AioContext while inside qio_channel_yield(). The rest of
the time, QIOChannel is independent of any AioContext.
In the new API, qio_channel_yield() queries the AioContext from the current
coroutine using qemu_coroutine_get_aio_context(). There is no need to
explicitly attach/detach AioContexts anymore and
qio_channel_attach_aio_context() and qio_channel_detach_aio_context() are gone.
One coroutine can read from the QIOChannel while another coroutine writes from
a different AioContext.
This API change allows the nbd block driver to use QIOChannel from any thread.
It's important to keep in mind that the block driver already synchronizes
QIOChannel access and ensures that two coroutines never read simultaneously or
write simultaneously.
This patch updates all users of qio_channel_attach_aio_context() to the
new API. Most conversions are simple, but vhost-user-server requires a
new qemu_coroutine_yield() call to quiesce the vu_client_trip()
coroutine when not attached to any AioContext.
While the API is has become simpler, there is one wart: QIOChannel has a
special case for the iohandler AioContext (used for handlers that must not run
in nested event loops). I didn't find an elegant way preserve that behavior, so
I added a new API called qio_channel_set_follow_coroutine_ctx(ioc, true|false)
for opting in to the new AioContext model. By default QIOChannel uses the
iohandler AioHandler. Code that formerly called
qio_channel_attach_aio_context() now calls
qio_channel_set_follow_coroutine_ctx(ioc, true) once after the QIOChannel is
created.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Message-ID: <20230830224802.493686-5-stefanha@redhat.com>
[eblake: also fix migration/rdma.c]
Signed-off-by: Eric Blake <eblake@redhat.com>
We can fail the blk_insert_bs() at init_blk_migration(), leaving the
BlkMigDevState without a dirty_bitmap and BlockDriverState. Account
for the possibly missing elements when doing cleanup.
Fix the following crashes:
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
359 BlockDriverState *bs = bitmap->bs;
#0 0x0000555555ec83ef in bdrv_release_dirty_bitmap (bitmap=0x0) at ../block/dirty-bitmap.c:359
#1 0x0000555555bba331 in unset_dirty_tracking () at ../migration/block.c:371
#2 0x0000555555bbad98 in block_migration_cleanup_bmds () at ../migration/block.c:681
Thread 1 "qemu-system-x86" received signal SIGSEGV, Segmentation fault.
0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
7073 QLIST_FOREACH_SAFE(blocker, &bs->op_blockers[op], list, next) {
#0 0x0000555555e971ff in bdrv_op_unblock (bs=0x0, op=BLOCK_OP_TYPE_BACKUP_SOURCE, reason=0x0) at ../block.c:7073
#1 0x0000555555e9734a in bdrv_op_unblock_all (bs=0x0, reason=0x0) at ../block.c:7095
#2 0x0000555555bbae13 in block_migration_cleanup_bmds () at ../migration/block.c:690
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Message-id: 20230731203338.27581-1-farosas@suse.de
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is how everything else in QEMUFile is structured.
As a bonus they are three less lines of code.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-17-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It was not used outside of qemu_file.c anyways.
Reviewed-by: Peter Xu <peterx@redhat.com>
Message-ID: <20230530183941.7223-21-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
It is not used outside of qemu_file, and it shouldn't.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230530183941.7223-19-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
We do a qemu_fclose() just after that, that also does a qemu_fflush(),
so remove one qemu_fflush().
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-3-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Fast don't say much. Noflush indicates more clearly that it is like
qemu_file_transferred but without the flush.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20230530183941.7223-2-quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
qemu_start_incoming_migration needs to check the number of multifd
channels or postcopy ram channels to configure the backlog parameter (i.e.
the maximum length to which the queue of pending connections for sockfd
may grow) of listen(). So enforce the usage of postcopy-preempt and
multifd as below:
- need to use "-incoming defer" on the destination; and
- set_capability and set_parameter need to be done before migrate_incoming
Otherwise, disable the use of the features and report error messages to
remind users to adjust the commands.
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230606101910.20456-2-wei.w.wang@intel.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Acked-by: Juan Quintela <quintela@redhat.com>
There are places in migration.c where the migration is marked failed with
MIGRATION_STATUS_FAILED, but the failure reason is never updated. Hence
libvirt doesn't know why the migration failed when it queries for it.
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Tejus GK <tejus.gk@nutanix.com>
Message-ID: <20230621130940.178659-2-tejus.gk@nutanix.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Extend query-migrate to provide throttle time and estimated
ring full time with dirty-limit capability enabled, through which
we can observe if dirty limit take effect during live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-8@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Implement dirty-limit convergence algo for live migration,
which is kind of like auto-converge algo but using dirty-limit
instead of cpu throttle to make migration convergent.
Enable dirty page limit if dirty_rate_high_cnt greater than 2
when dirty-limit capability enabled, Disable dirty-limit if
migration be canceled.
Note that "set_vcpu_dirty_limit", "cancel_vcpu_dirty_limit"
commands are not allowed during dirty-limit live migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-7@git.sr.ht>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This commit is prepared for the implementation of dirty-limit
convergence algo.
The detection logic of throttling condition can apply to both
auto-converge and dirty-limit algo, putting it's position
before the checking logic for auto-converge feature.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <168733225273.5845.15871826788879741674-6@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Check if block migration is running before throttling
guest down in auto-converge way.
Note that this modification is kind of like code clean,
because block migration does not depend on auto-converge
capability, so the order of checks can be adjusted.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-5@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce migration dirty-limit capability, which can
be turned on before live migration and limit dirty
page rate durty live migration.
Introduce migrate_dirty_limit function to help check
if dirty-limit capability enabled during live migration.
Meanwhile, refactor vcpu_dirty_rate_stat_collect
so that period can be configured instead of hardcoded.
dirty-limit capability is kind of like auto-converge
but using dirty limit instead of traditional cpu-throttle
to throttle guest down. To enable this feature, turn on
the dirty-limit capability before live migration using
migrate-set-capabilities, and set the parameters
"x-vcpu-dirty-limit-period", "vcpu-dirty-limit" suitably
to speed up convergence.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-4@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "vcpu-dirty-limit" migration parameter used
to limit dirty page rate during live migration.
"vcpu-dirty-limit" and "x-vcpu-dirty-limit-period" are
two dirty-limit-related migration parameters, which can
be set before and during live migration by qmp
migrate-set-parameters.
This two parameters are used to help implement the dirty
page rate limit algo of migration.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Acked-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-3@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
Introduce "x-vcpu-dirty-limit-period" migration experimental
parameter, which is in the range of 1 to 1000ms and used to
make dirtyrate calculation period configurable.
Currently with the "x-vcpu-dirty-limit-period" varies, the
total time of live migration changes, test results show the
optimal value of "x-vcpu-dirty-limit-period" ranges from
500ms to 1000 ms. "x-vcpu-dirty-limit-period" should be made
stable once it proves best value can not be determined with
developer's experiments.
Signed-off-by: Hyman Huang(黄勇) <yong.huang@smartx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <168618975839.6361.17407633874747688653-2@git.sr.ht>
Signed-off-by: Juan Quintela <quintela@redhat.com>
This doubly linked list is common for all the multifd and migration
threads so we need to avoid concurrent access.
Add a mutex to protect the data from concurrent access. This fixes a
crash when removing two MigrationThread objects from the list at the
same time during cleanup of multifd threads.
Fixes: 671326201d ("migration: Introduce interface query-migrationthreads")
Signed-off-by: Fabiano Rosas <farosas@suse.de>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-Id: <20230607161306.31425-3-farosas@suse.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
