qemu_opt_del() already assumes that all QemuOpt instances contain
malloc'd name and value; but it had to cast away const because
opts_start_struct() was doing its own thing and using static storage
instead. By using the correct type and malloced strings everywhere, the
usage of this struct becomes clearer.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Change qapi interfaces to output the newly added def_value_str when querying
command line options.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Leandro Dorileo <l@dorileo.org>
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add def_value_str (default value) to QemuOptDesc, to replace function of the
default value in QEMUOptionParameter.
Improve qemu_opts_get_* functions: if find opt, return opt->str; otherwise,
if desc->def_value_str is set, return desc->def_value_str; otherwise, return
input defval.
Improve qemu_opts_print: if option is set, print opt->str; otherwise, if
desc->def_value_str is set, print it.
Signed-off-by: Dong Xu Wang <wdongxu@linux.vnet.ibm.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently this function is not used anywhere. In later patches, it will
replace print_option_parameters. To avoid print info changes, change
qemu_opts_print from fprintf stderr to printf, and remove last printf.
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Chunyan Liu <cyliu@suse.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't use atoi() function which doesn't detect errors, switch to
strtol and error out on failures. Also add a range check while
being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
There is no need to clutter the user's choices with repeating the same value
multiple times.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Include termios.h as POSIX fallback when not glibc, bsd or solaris.
POSIX says that termios.h should define struct termios and TCAFLUSH.
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/termios.h.html
This fixes the following compile errors with musl libc:
util/qemu-openpty.c: In function 'qemu_openpty_raw':
util/qemu-openpty.c:112:20: error: storage size of 'tty' isn't known
struct termios tty;
^
...
util/qemu-openpty.c:128:24: error: 'TCSAFLUSH' undeclared (first use in this function)
tcsetattr(*aslave, TCSAFLUSH, &tty);
^
Signed-off-by: Natanael Copa <ncopa@alpinelinux.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The function popcountl() in hbitmap.c is effectively a reimplementation
of what host-utils.h provides as ctpopl(). Use ctpopl() directly; this fixes
a failure to compile on NetBSD (whose strings.h erroneously exposes a
system popcountl() which clashes with this one).
Reported-by: Martin Husemann <martin@duskware.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The 'on' variable is never used, and 'off' is only used
if IPV6_V6ONLY is defined; delete 'on' and move 'off' to
the point where it is used. This avoids warnings from
clang 3.4.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Block I/O throttling uses timers and currently always adds them to the
main loop. Throttling will break if bdrv_set_aio_context() is used to
move a BlockDriverState to a different AioContext.
This patch adds throttle_detach/attach_aio_context() interfaces so the
throttling timers and uses them to move timers to the new AioContext.
Note that bdrv_set_aio_context() already drains all requests so we're
sure no throttled requests are pending.
The test cases need to be updated since the throttle_init() interface
has changed.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Separate the search for a working addrinfo from the code that does
something with it. Makes for a clearer search loop.
Use a local Error * to simplify resetting the error in the search
loop.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
After commit 767adce2d, they are redundant. This way we don't assign them
except when needed. Once there, there were lots of cases where the ".fields"
indentation was wrong:
.fields = (VMStateField []) {
and
.fields = (VMStateField []) {
Change all the combinations to:
.fields = (VMStateField[]){
The biggest problem (apart from aesthetics) was that checkpatch complained
when we copy&pasted the code from one place to another.
Signed-off-by: Juan Quintela <quintela@redhat.com>
[PMM: fixed minor conflict, corrected commit message typos]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTbSUxAAoJEJykq7OBq3PIh+EH/1pfLspteDS4hlTZZ8D5r+iN
AEmemUQpMDGawLHQSJcK3xgNWSz5ei3HxLuXz9+5f3ZhP+ECsrTnf+60uzHkdd6j
axG1viAHEBtX0ZumTdo0XY6FtCZmCRqRz8nfqxs1Q3O7UtZaDqLf1m/BNguw5K8G
VHtuPAVidTWcS6QT6CoEdJ4coA3F8ZuK1viTU2nsBE28lqB99ZG9Zkr2pOCXXra2
5d6OIZYyc+PNW2HuNZTmma41aVoYJnT797qr2cLbZ3q38ykwmWU6cNrLsf+O91yT
wnsCG6g1MdQb9mwVp0spPU/X/IuKbRg449XOzY9Ko4HmuSn1Inf6gUIBMigecjQ=
=wmRq
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 09 May 2014 19:57:53 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request:
glib: fix g_poll early timeout on windows
block: qemu-iotests - test for live migration
block: qemu-iotests - update 085 to use common.qemu
block: qemu-iotests - add common.qemu, for bash-controlled qemu tests
block/raw-posix: Try both FIEMAP and SEEK_HOLE
gluster: Correctly propagate errors when volume isn't accessible
vl.c: remove init_clocks call from main
block: Fix open flags with BDRV_O_SNAPSHOT
qemu-iotests: Test converting to streamOptimized from small cluster size
vmdk: Implement .bdrv_get_info()
vmdk: Implement .bdrv_write_compressed
qemu-img: Convert by cluster size if target is compressed
block/iscsi: bump year in copyright notice
block/nfs: Check for NULL server part
qemu-img: sort block formats in help message
iotests: Use configured python
qcow2: Fix alloc_clusters_noref() overflow detection
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
g_poll has a problem on Windows when using
timeouts < 10ms, in glib/gpoll.c:
/* If not, and we have a significant timeout, poll again with
* timeout then. Note that this will return indication for only
* one event, or only for messages. We ignore timeouts less than
* ten milliseconds as they are mostly pointless on Windows, the
* MsgWaitForMultipleObjectsEx() call will timeout right away
* anyway.
*/
if (retval == 0 && (timeout == INFINITE || timeout >= 10))
retval = poll_rest (poll_msgs, handles, nhandles, fds, nfds, timeout);
so whenever g_poll is called with timeout < 10ms it does
a quick poll instead of wait, this causes significant performance
degradation of QEMU, thus we should use WaitForMultipleObjectsEx
directly
Signed-off-by: Stanislav Vorobiov <s.vorobiov@samsung.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Using error_is_set(ERRP) to find out whether to bail out due to
previous error is either wrong, fragile, or unnecessarily opaque.
It's wrong when ERRP may be null, because errors go undetected when it
is. It's fragile when proving ERRP non-null involves a non-local
argument. Else, it's unnecessarily opaque (see commit 84d18f0).
The error_is_set(state->errp) in qemu_opts_from_qdict_1() is merely
fragile, because the callers never pass state argument with null
state->errp.
Make the code more robust and more obviously correct: test
*state->errp directly.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
qemu_parse_fd() used to handle at least the following strings incorrectly:
o "-2": simply let through
o "2147483648": returned as LONG_MAX==INT_MAX on ILP32 (with ERANGE
ignored); implementation-defined behavior on LP64
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
glib >= 2.31 always enables thread support and g_thread_supported()
is #defined to 1, there's no need to call g_thread_init() anymore,
and it definitely does not need to report error which never happens.
Keep code for old < 2.31 glibc anyway for now, just #ifdef it
differently.
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Cc: qemu-trivial@nongnu.org
Fields "name" (created with strdup in new_entry) and "pathname"
(created with g_strdup_printf in new_entry) of pathelem struct should
be freed before the whole struct is.
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Makes it a bit clear how the interdependencies work.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Just hardcode them in the callers
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
monitor_printf will drop the requested output if cur_mon is qmp (for
good reason). However these messages are often helpful for debugging
issues with via libvirt.
If we know the message won't hit the monitor, send it to stderr.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Cc: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Cole Robinson <crobinso@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJTNWRMAAoJECgfDbjSjVRp6CoH/A3iLi+jkV4EhQQzU8U6vOmi
PIV71600rZd29u4hk6w5pyev6yyXSBwatmWk+vzHvINUIcc22KUue+773nXPW/fH
3oIgTwjKndE98V5vTSeOgOdD7iFuWlcgHQHLXXMsgpY1hVMS/1kidZdb+36o8euI
kdE+AxYGXS8Z3oBRFfROpT4v0UZ17qIaL4tqA4JJWMh/A3Qp3HY+ffU3ODAvKSQw
KWVWmKvbh82I25HOvALoMwtu26x48jhzu586pHBuEsHgTJKKBrAUdWph+2f1eSC+
xTgduKWEgK6Z9dCYDQwDaM8CqNzjqVzfgRu0RCSHtgTxCWaIN3dQbxEFi7WQ2Yo=
=dfqJ
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mst/tags/for_upstream' into staging
acpi,pc,build bug fixes
Here are some bugfixes for 2.0.
A bugfix for acpi for pci bridges, and a build fix for
old systems without pthread_setname_np: both fix regressions
so we definitely want to include them.
HPET fix is not for a regression but looks very safe,
fixes a nasty bug and has been on list for a while.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Fri 28 Mar 2014 12:00:12 GMT using RSA key ID D28D5469
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>"
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>"
* remotes/mst/tags/for_upstream:
acpi: fix ACPI generation for pci bridges
Don't enable a HPET timer if HPET is disabled
Detect pthread_setname_np at configure time
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.12 (GNU/Linux)
iJwEAAECAAYFAlM0QokACgkQUlPFrXTwyDg0MAP/aV+I1bH7nAIXEPxfFNUd4bBQ
PsgaDTOd44G8SGjBqpO7EvgElBPfKnRfQjDmNV2LqYK6p+NMtlUh+ULDjxEBMBRU
hDXOWMlhHUU1to3vdN6qsRhCHNMEQUFeJWpv5EVIaD/VZkcgpz90F4WF6ZE0Xs9R
ZuUVbV/bapaow7bKoIk=
=3iLr
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/mjt/tags/trivial-patches-2014-03-27' into staging
trivial patches for 2014-03-27
# gpg: Signature made Thu 27 Mar 2014 15:23:53 GMT using RSA key ID 74F0C838
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>"
# gpg: aka "Michael Tokarev <mjt@corpit.ru>"
# gpg: aka "Michael Tokarev <mjt@debian.org>"
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: E190 8639 3B10 B51B AC2C 8B73 5253 C5AD 74F0 C838
* remotes/mjt/tags/trivial-patches-2014-03-27: (23 commits)
linux-user: remove duplicate statement
hw/timer/grlib_gptimer: remove unnecessary assignment
hw/pci-host/apb.c: Avoid shifting left into sign bit
hw/intc/xilinx_intc: Avoid shifting left into sign bit
hw/intc/slavio_intctl: Avoid shifting left into sign bit
tests/libqos/pci-pc: Avoid shifting left into sign bit
hw/ppc: Avoid shifting left into sign bit
hw/intc/openpic: Avoid shifting left into sign bit
hw/usb/hcd-ohci.c: Avoid shifting left into sign bit
target-mips: Avoid shifting left into sign bit
hw/i386/acpi_build.c: Avoid shifting left into sign bit
hw/pci/pci_host.c: Avoid shifting left into sign bit
hw/intc/apic.c: Use uint32_t for mask word in foreach_apic
target-i386: Avoid shifting left into sign bit
CODING_STYLE: Section about mixed declarations
doc: update default PowerPC framebuffer settings
doc: update sun4m documentation
fix return check for KVM_GET_DIRTY_LOG ioctl
target-i386: Add missing 'static' and 'const' attributes
util: Add 'static' attribute to function implementation
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Warn if no way of setting thread name is available.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
The static code analyzer smatch complains because of a missing 'static'
attribute:
util/module.c:166:6: warning:
symbol 'module_load' was not declared. Should it be static?
'static' is used in the forward declaration, but not in the implementation.
Add it there, too.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds a helper to format ethernet MAC address.
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
glib versions prior to 2.31.0 require an explicit g_thread_init() call
to enable multi-threading.
Failure to initialize threading causes glib to take single-threaded code
paths without synchronization. For example, the g_slice allocator will
crash due to race conditions.
Fix this for all QEMU tool programs (qemu-nbd, qemu-io, qemu-img) by
moving the g_thread_init() call from vl.c:main() into a new
osdep.c:thread_init() constructor function.
thread_init() has __attribute__((constructor)) and is automatically
invoked by the runtime during startup.
We can now drop the "simple" trace backend's g_thread_init() call since
thread_init() already called it.
Note that we must keep coroutine-gthread.c's g_thread_init() call which
is located in a constructor function. There is no guarantee for
constructor function ordering so thread_init() may only be called later.
Reported-by: Mario de Chenno <mario.dechenno@unina2.it>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 10f5bff622 (util: Split out
exec_dir from os_find_datadir) moved code from os-posix.c to
util/oslib-posix.c but forgot to move a FreeBSD #include alongside,
needed for CTL_KERN among others.
Cc: Fam Zheng <famz@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <andreas.faerber@web.de>
Message-id: 1394717279-23406-1-git-send-email-andreas.faerber@web.de
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
QemuMutex does not guarantee fairness and cannot be acquired
recursively:
Fairness means each locker gets a turn and the scheduler cannot cause
starvation.
Recursive locking is useful for composition, it allows a sequence of
locking operations to be invoked atomically by acquiring the lock around
them.
This patch adds RFifoLock, a recursive lock that guarantees FIFO order.
Its first user is added in the next patch.
RFifoLock has one additional feature: it can be initialized with an
optional contention callback. The callback is invoked whenever a thread
must wait for the lock. For example, it can be used to poke the current
owner so that they release the lock soon.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
pthread_setname_np was introduced with 2.12.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Reviewed-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
If enabled, set the thread name at creation (on GNU systems with
pthread_set_np)
Fix up all the callers with a thread name
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Add flag storage to qemu-thread-* to store the namethreads flag
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
This patch adds the Divide Doubleword Extended instructions.
The implementation builds on the unsigned helper provided in
the previous patch.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Alexander Graf <agraf@suse.de>
This patch adds the Divide Doubleword Extended Unsigned
instructions. This instruction requires dividing a 128-bit
value by a 64 bit value. Since 128 bit integer division is
not supported in TCG, a helper is used. An architecture
independent 128-bit division routine is added to host-utils.
Signed-off-by: Tom Musta <tommusta@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
[agraf: use ||]
Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Compiling util/modules.c with modules enabled fails now.
Fix it by including qemu-common.h before #ifdef testing in module.c.
Signed-off-by: Fam Zheng <famz@redhat.com>
Message-id: 1393453893-12125-1-git-send-email-famz@redhat.com
Reviewed-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
gmodule-2.0's pkg-config files include -Wl,--export-dynamic, which breaks
static builds. It is a glib bug, but we need to support --static builds for
the linux-user targets, and in the end all that is needed to fix this is:
* outlaw --enable-modules --static, which makes little sense anyway
* only include gmodule-2.0's cflags and ldflags if --enable-modules is
specified on the command line.
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1393346215-5636-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=ZaDG
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block patches
# gpg: Signature made Fri 21 Feb 2014 21:42:24 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (54 commits)
iotests: Mixed quorum child device specifications
quorum: Simplify quorum_open()
quorum: Add unit test.
quorum: Add quorum_open() and quorum_close().
quorum: Implement recursive .bdrv_recurse_is_first_non_filter in quorum.
quorum: Add quorum_co_flush().
quorum: Add quorum_invalidate_cache().
quorum: Add quorum_getlength().
quorum: Add quorum mechanism.
quorum: Add quorum_aio_readv.
blkverify: Extract qemu_iovec_clone() and qemu_iovec_compare() from blkverify.
quorum: Add quorum_aio_writev and its dependencies.
quorum: Create BDRVQuorumState and BlkDriver and do init.
quorum: Create quorum.c, add QuorumChildRequest and QuorumAIOCB.
check-qdict: Test termination of qdict_array_split()
check-qdict: Adjust test for qdict_array_split()
qdict: Extract non-QDicts in qdict_array_split()
qemu-config: Sections must consist of keys
qemu-iotests: Check qemu-img command line parsing
qemu-img: Allow -o help with incomplete argument list
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
* remotes/bonzini/configure:
build: softmmu targets do not have a "main.o" file
configure: Disable libtool if -fPIE does not work with it (bug #1257099)
block: convert block drivers linked with libs to modules
Makefile: introduce common-obj-m and block-obj-m for DSO
Makefile: install modules with "make install"
module: implement module loading
rules.mak: introduce DSO rules
darwin: do not use -mdynamic-no-pic
block: use per-object cflags and libs
rules.mak: allow per object cflags and libs
rules.mak: fix $(obj) to a real relative path
util: Split out exec_dir from os_find_datadir
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
qemu_iovec_compare() will be used to compare IOs vectors in quorum blkverify
mode. The patch extracts these functions in order to factorize the code.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In config_parse_qdict_section(), the QList returned by
qdict_array_split() is assumed to only contain QDicts. Currently, this
is true but it may (and will) change in the future. Therefore, check
whether the assumption actually holds.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
has_help_option() checks if any help option ('help' or '?') occurs
anywhere in an option string, so that things like 'cluster_size=4k,help'
are recognised.
is_valid_option_list() ensures that the option list doesn't have options
with leading commas or trailing unescaped commas.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
This patch adds loading, stamp checking and initialization of modules.
The init function of dynamic module is no longer directly called as
__attribute__((constructor)) in static linked version, it is called
only after passed the checking of presense of stamp symbol:
qemu_stamp_$RELEASEHASH
where $RELEASEHASH is generated by hashing version strings and content
of configure script.
With this, modules built from a different tree/version/configure will
not be loaded.
The module loading code requires gmodule-2.0.
Modules are searched under
- CONFIG_MODDIR
- executable folder (to allow running qemu-{img,io} in the build
directory)
- ../ of executable folder (to allow running system emulator in the
build directory)
Modules are linked under their subdir respectively, then copied to top
level of build directory for above convinience, e.g.:
$(BUILD_DIR)/block/curl.so -> $(BUILD_DIR)/block-curl.so
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
With this change, main() calls qemu_init_exec_dir and uses argv[0] to
init exec_dir. The saved value can be retrieved with
qemu_get_exec_dir later. It will be reused by module loading.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
To improve the predictability of fifo8_pop_buf(), the fifo head is set
to the start of data buffer upon a reset so that the first call to the
function will be able to retrieve all data in the fifo.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The patch adds functions fifo8_push_all() and fifo8_pop_buf() which
can be used respectively to push the content of a memory buffer to the
fifo and to pop multiple bytes obtaining a pointer to the fifo backing
buffer.
In addition, it implements fifo8_num_free() and fifo8_num_used() which
allow to check if a multi-byte operation can be performed.
Signed-off-by: Beniamino Galvani <b.galvani@gmail.com>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
osdep.c does not use trace_*() so we can just drop the include.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
The functions used by qemu_memalign() require an alignment that is at
least sizeof(void*). Adjust it if it is too small.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoît Canet <benoit@irqsave.net>
Since commit a7aae221 ('Switch SIG_IPI to SIGUSR1'), SIGUSR1 is blocked
during startup, breaking the progress report in tools.
This patch reenables the signal when initialising a progress report.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
This function basically parses command-line options given as a QDict
replacing a config file.
For instance, the QDict {"section.opt1": 42, "section.opt2": 23}
corresponds to the config file:
[section]
opt1 = 42
opt2 = 23
It is possible to specify multiple sections and also multiple sections
of the same type. On the command line, this looks like the following:
inject-error.0.event=reftable_load,\
inject-error.1.event=l2_load,\
set-state.event=l1_update
This would correspond to the following config file:
[inject-error "inject-error.0"]
event = reftable_load
[inject-error "inject-error.1"]
event = l2_load
[set-state]
event = l1_update
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Using stdin with readline.c requires disabling echo and line buffering.
Add a portable wrapper to set the terminal attributes under Linux and
Windows.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Now that the monitor and readline are decoupled, readline.h no longer
belongs in include/monitor/. Put the header into include/qemu/.
Move the source file into util/ so it can be linked as part of
libqemuutil.a.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This reverts commit d32934c84c.
The original implementation before this patch makes abortive error
messages much more friendly. The underlying bug that required this
change is now fixed. Revert.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Use fprintf(stderr instead. This removes dependency of libqemuutil.a
on the monitor.
We can further justify this change, in that this code path should only
trigger under a fatal error condition. fprintf-stderr is probably the
appropriate medium as under a fatal error conidition the monitor itself
may be down and out for the count. So assertion failure messages should
go lowest common denominator - straight to stderr.
Fixes the build as reported by Kevin Wolf. Issue debugged and change
suggested by Luiz Capitulino. Issue introduced by
5d24ee70bc.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Move index and size fields from int to long. We need that for
migration. long is 64 bits on sane architectures, and 32bits should
be enough on all the 32bits architectures.
Signed-off-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
This is a boiler-plate _nofail variant of qemu_opts_create. Remove and
use error_abort in call sites.
null/0 arguments needs to be added for the id and fail_if_exists fields
in affected callsites due to argument inconsistency between the normal and
no_fail variants.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Add a special Error * that can be passed to error handling APIs to
signal that any errors are fatal and should abort QEMU. There are two
advantages to this:
- allows for brevity when wishing to assert success of Error **
accepting APIs. No need for this pattern:
Error * local_err = NULL;
api_call(foo, bar, &local_err);
assert_no_error(local_err);
This also removes the need for _nofail variants of APIs with
asserting call sites now reduced to 1LOC.
- SIGABRT happens from within the offending API. When a fatal error
occurs in an API call (when the caller is asserting sucess) failure
often means the API itself is broken. With the abort happening in the
API call now, the stack frames into the call are available at debug
time. In the assert_no_error scheme the abort happens after the fact.
The exact semantic is that when an error is raised, if the argument
Error ** matches &error_abort, then the abort occurs immediately. The
error messaged is reported.
For error_propagate, if the destination error is &error_abort, then
the abort happens at propagation time.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.15 (GNU/Linux)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=uEdP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches for 2.0 (flushing block-next)
# gpg: Signature made Fri 29 Nov 2013 08:43:18 AM PST using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
# By Peter Lieven (17) and others
# Via Kevin Wolf
* kwolf/tags/for-anthony: (41 commits)
qemu-iotests: Add sample image and test for VMDK version 3
vmdk: Allow read only open of VMDK version 3
qemu-iotests: Filter out 'qemu-io> ' prompt
qemu-iotests: Filter qemu-io output in 025
block: Use BDRV_O_NO_BACKING where appropriate
qemu-iotests: Test snapshot mode
block: Enable BDRV_O_SNAPSHOT with driver-specific options
qemu-iotests: Make test case 030, 040 and 055 deterministic
qemu-iotest: Add pause_drive and resume_drive methods
blkdebug: add "remove_break" command
qemu-iotests: Drop local version of cancel_and_wait from 040
sheepdog: support user-defined redundancy option
sheepdog: refactor do_sd_create()
qdict: Optimise qdict_do_flatten()
qdict: Fix memory leak in qdict_do_flatten()
MAINTAINERS: add sheepdog development mailing list
COW: Extend checking allocated bits to beyond one sector
COW: Speed up writes
qapi: Change BlockDirtyInfo to list
block: per caller dirty bitmap
...
Message-id: 1385743555-27888-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
With this we no longer pass down envp, and thus all systems can have
the same void prototype. So also eliminate a useless thunk.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
There may be calls to error_setg() and especially error_setg_errno()
which blindly (and until now wrongly) assume these functions not to
clobber errno (e.g., they pass errno to error_setg_errno() and return
-errno afterwards). Instead of trying to find and fix all of these
constructs, just make sure error_setg() and error_setg_errno() indeed do
not clobber errno.
Suggested-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Currently we have three QemuOptsList (qemu_common_drive_opts,
qemu_legacy_drive_opts, and qemu_drive_opts), only qemu_drive_opts
is added to vm_config_groups[].
This patch changes query-command-line-options to access three local
QemuOptsLists for drive option, and merge the description items
together.
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This emulates Win32 manual-reset events using futexes or conditional
variables. Typical ways to use them are with multi-producer,
single-consumer data structures, to test for a complex condition whose
elements come from different threads:
for (;;) {
qemu_event_reset(ev);
... test complex condition ...
if (condition is true) {
break;
}
qemu_event_wait(ev);
}
Or more efficiently (but with some duplication):
... evaluate condition ...
while (!condition) {
qemu_event_reset(ev);
... evaluate condition ...
if (!condition) {
qemu_event_wait(ev);
... evaluate condition ...
}
}
QemuEvent provides a very fast userspace path in the common case when
no other thread is waiting, or the event is not changing state.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_thread_create already does signal blocking and detaching for us.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
blockdev-add shouldn't automatically generate IDs, but will keep most of
the DriveInfo creation code.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
migration: Fix compiler warning ('caps' may be used uninitialized)
util/path: Fix type which is longer than 8 bit for MinGW
hw/9pfs: Fix errno value for xattr functions
vl: Clean up unnecessary boot_order complications
qemu-char: Fix potential out of bounds access to local arrays
pci-ohci: Add missing 'break' in ohci_service_td
sh4: Fix serial line access for Linux kernels later than 3.2
hw/alpha: Fix compiler warning (integer constant is too large)
target-i386: Fix compiler warning (integer constant is too large)
block: Remove unused assignment (fixes warning from clang)
exec: cleanup DEBUG_SUBPAGE
tests: Fix schema parser test for in-tree build
tests: Update .gitignore for test-int128 and test-bitops
.gitignore: ignore tests/qemu-iotests/socket_scm_helper
Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
While dirent->d_type is 8 bit for most systems, it is 32 bit for MinGW.
Reducing it to 8 bit results in a compiler warning because the macro
is_dir_maybe compares that 8 bit value with 32 bit constants.
Using 'unsigned' instead of 'unsigned char' matches the declaration for
MinGW and does not harm the other systems.
MinGW-w64 is not affected: it does not declare d_type.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
SO_REUSEADDR should be avoided on Windows but is desired on other operating
systems. So instead of setting it we call socket_set_fast_reuse that will result
in the appropriate behaviour on all operating systems.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
If a socket is closed it remains in TIME_WAIT state for some time. On operating
systems using BSD sockets the endpoint of the socket may not be reused while in
this state unless SO_REUSEADDR was set on the socket. On windows on the other
hand the default behaviour is to allow reuse (i.e. identical to SO_REUSEADDR on
other operating systems) and setting SO_REUSEADDR on a socket allows it to be
bound to a endpoint even if the endpoint is already used by another socket
independently of the other sockets state. This can even result in undefined
behaviour.
Many sockets used by QEMU should not block the use of their endpoint after being
closed while they are still in TIME_WAIT state. Currently QEMU sets SO_REUSEADDR
for such sockets, which can lead to problems on Windows. This patch introduces
the function socket_set_fast_reuse that should be used instead of setting
SO_REUSEADDR when fast socket reuse is desired and behaves correctly on all
operating systems.
As a failure of this function can only be caused by bad QEMU internal errors, an
assertion handles these situations. The return value is still passed on, to
minimize changes in client code and prevent unused variable warnings if NDEBUG
is defined.
Signed-off-by: Sebastian Ottlik <ottlik@fzi.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
Print a warning when opening a file O_DIRECT fails with EINVAL. This
saves users a lot of time trying to figure out the EINVAL error, which
is typical when attempting to open a file O_DIRECT on Linux tmpfs.
Reported-by: Deepak C Shetty <deepakcs@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
We abort() on memory allocation failure. abort() is appropriate for
programming errors. Maybe most memory allocation failures are
programming errors, maybe not. But guest memory allocation failure
isn't, and aborting when the user asks for more memory than we can
provide is not nice. exit(1) instead, and do it in just one place, so
the error message is consistent.
Tested-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Acked-by: Laszlo Ersek <lersek@redhat.com>
Acked-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Message-id: 1375276272-15988-8-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
# By Tomoki Sekiyama (10) and Paul Burton (1)
# Via Michael Roth
* mdroth/qga-pull-2013-9-9:
QMP/qemu-ga-client: Make timeout longer for guest-fsfreeze-freeze command
qemu-ga: Install Windows VSS provider on `qemu-ga -s install'
qemu-ga: Call Windows VSS requester in fsfreeze command handler
qemu-ga: Add Windows VSS provider and requester as DLL
error: Add error_set_win32 and error_setg_win32
qemu-ga: Add configure options to specify path to Windows/VSS SDK
Add a script to extract VSS SDK headers on POSIX system
checkpatch.pl: Check .cpp files
Add c++ keywords to QAPI helper script
configure: Support configuring C++ compiler
mips_malta: support up to 2GiB RAM
Message-id: 1378755701-2051-1-git-send-email-mdroth@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
These functions help maintaining homogeneous formatting of error messages
with Windows error code and description (generated by
g_win32_error_message()).
Signed-off-by: Tomoki Sekiyama <tomoki.sekiyama@hds.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Implement the continuous leaky bucket algorithm devised on IRC as a separate
module.
Signed-off-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Adds an "assigned" flag to QEMUOptionParameter which is cleared at the
beginning of parse_option_parameters and set on (successful)
set_option_parameter and set_option_parameter_int.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Commit 6d4cd40 fixed qemu_opts_set_defaults() for an existing corner
case, but broke it for another one that can't be reached in current
code.
Quote from its commit message:
I believe [opts_parse()] attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
The only caller that passes true for defaults is
qemu_opts_set_defaults().
The commit message then claims:
A straightforward call of qemu_opts_create() does exactly that.
Wrong. When !list->merge_lists, and the option string doesn't contain
id=, and options without ID exist, then we don't actually modify the
existing options, we create new ones.
Not reachable, because we never pass lists with !list->merge_lists to
qemu_opts_set_defaults().
Guard against possible (if unlikely) future misuse with assert().
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1375428840-5275-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Without this patch, iov_send_recv() never returns when do_send_recv()
returns zero.
Signed-off-by: MORITA Kazutaka <morita.kazutaka@lab.ntt.co.jp>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Fix following bugs in "fallback implementation of counting semaphores
with mutex+condvar" added in c166cb72f1:
- waiting threads are not restarted properly if more than one threads
are waiting unblock signals in qemu_sem_timedwait()
- possible missing pthread_cond_signal(3) calls when waiting threads
are returned by ETIMEDOUT
- fix an uninitialized variable
The problem is analyzed by and fix is provided by Noriyuki Soda.
Also put additional cleanup suggested by Laszlo Ersek:
- make QemuSemaphore.count unsigned (it won't be negative)
- check a return value of in pthread_cond_wait() in qemu_sem_wait()
Signed-off-by: Izumi Tsutsui <tsutsui@ceres.dti.ne.jp>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Message-id: 1372841894-10634-1-git-send-email-tsutsui@ceres.dti.ne.jp
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This patch adds a 'SIZE' type property to qdev.
Signed-off-by: Ian Molton <ian.molton@collabora.co.uk>
Signed-off-by: Vasilis Liaskovitis <vasilis.liaskovitis@profitbricks.com>
Signed-off-by: Hu Tao <hutao@cn.fujitsu.com>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1375109277-25561-7-git-send-email-imammedo@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The current code includes assert.h very early (from qemu-common.h),
so the definition of NDEBUG was without any effect.
In the initial version from 2004, NDEBUG was used to disable the assertions.
Those assertions are not in time critical code, so it is no longer
reasonable to disable them and the definition of NDEBUG can be removed.
Type u16 is also unused and therefore does not need a type definition.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
[Issue]
When we offer a customer support service and a problem happens
in a customer's system, we try to understand the problem by
comparing what the customer reports with message logs of the
customer's system.
In this case, we often need to know when the problem happens.
But, currently, there is no timestamp in qemu's error messages.
Therefore, we may not be able to understand the problem based on
error messages.
[Solution]
Add a timestamp to qemu's error message logged by
error_report() with g_time_val_to_iso8601().
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit 4f6dd9a changed the initialization of opts in opts_parse() to
this:
if (defaults) {
if (!id && !QTAILQ_EMPTY(&list->head)) {
opts = qemu_opts_find(list, NULL);
} else {
opts = qemu_opts_create(list, id, 0);
}
} else {
opts = qemu_opts_create(list, id, 1);
}
Same as before for !defaults.
If defaults is true, and params has no ID, and options exist, we use
the first assignment. It sets opts to null if all options have an ID.
opts_parse() then returns null. qemu_opts_set_defaults() asserts the
value is non-null. It's the only caller that passes true for
defaults.
To reproduce, try "-M xenpv -machine id=foo" (yes, "id=foo" is silly,
but it shouldn't crash).
I believe the function attempts to do the following:
If options don't yet exist, create new options
Else, if defaults, modify the existing options
Else, if list->merge_lists, modify the existing options
Else, fail
A straightforward call of qemu_opts_create() does exactly that.
Cc: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1372943363-24081-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Crashes when the first list member has an ID. Admittedly nonsensical
reproducer:
$ qemu-system-x86_64 -nodefaults -machine id=foo -machine ""
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372943363-24081-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
notifier_list_notify() has no return value. This is fine when we just
want to invoke side-effects.
Sometimes it's useful for notifiers to produce a return value. This
allows notifiers to "veto" an operation and will be used by the block
layer before-write notifier.
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Watch this:
$ upstream-qemu -nodefaults -S -vnc :0,acl,sasl -monitor stdio
QEMU 1.5.50 monitor - type 'help' for more information
(qemu) acl_add vnc.username drei allow
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow drei
(qemu) acl_add vnc.username zwei allow 1
acl: added rule at position 2
(qemu) acl_show vnc.username
policy: deny
1: allow drei
2: allow zwei
(qemu) acl_add vnc.username eins allow 1
acl: added rule at position 1
(qemu) acl_show vnc.username
policy: deny
1: allow eins
2: allow drei
3: allow zwei
The second acl_add inserts at position 2 instead of 1.
Root cause is an off-by-one in qemu_acl_insert(): when index ==
acl->nentries, it appends instead of inserting before the last list
element.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1371208516-7857-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
According to RFC 1123 [1], hostnames can start with a digit too.
[1] http://tools.ietf.org/html/rfc1123#page-13
Signed-off-by: Ján Tomko <jtomko@redhat.com>
Cc: qemu-stable@nongnu.org
[Use strspn, not strcspn. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
This function returns ${prefix}/var/RELATIVE_PATHNAME on POSIX-y systems,
and <CSIDL_COMMON_APPDATA>/RELATIVE_PATHNAME on Win32.
http://msdn.microsoft.com/en-us/library/bb762494.aspx
[...] This folder is used for application data that is not user
specific. For example, an application can store a spell-check
dictionary, a database of clip art, or a log file in the
CSIDL_COMMON_APPDATA folder. [...]
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
On FreeBSD libutil is used for openpty(), but it also provides a hexdump()
which conflicts with QEMU's.
Signed-off-by: Ed Maste <emaste@freebsd.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368718348-15199-1-git-send-email-emaste@freebsd.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We switched from qemu_memalign to mmap() but then we don't modify
qemu_vfree() to do a munmap() over free(). Which we cannot do
because qemu_vfree() frees memory allocated by qemu_{mem,block}align.
Introduce a new function that does the munmap(), luckily the size is
available in the RAMBlock.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This is preparatory to the introduction of a separate freeing API.
Reported-by: Amos Kong <akong@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Amos Kong <akong@redhat.com>
Message-id: 1368454796-14989-2-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds the Castagnoli CRC32C algorithm, using the 0x11EDC6F41
polynomial.
This is extracted from the linux kernel cryptographic crc32.c module.
The algorithm is based on:
Castagnoli93: Guy Castagnoli and Stefan Braeuer and Martin Herrman
"Optimization of Cyclic Redundancy-Check Codes with 24
and 32 Parity Bits", IEEE Transactions on Communication,
Volume 41, Number 6, June 1993
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit e9d8fbf (qemu-file: do not use stdio for qemu_fdopen, 2013-03-27)
introduced a usage of writev, which mingw32 does not have. Even though
qemu_fdopen itself is not used on mingw32, the future-proof solution is
to add an implementation of it. This is simple and similar to how we
emulate sendmsg/recvmsg in util/iov.c.
Some files include osdep.h without qemu-common.h, so move the definition
of iovec to osdep.h too, and include osdep.h from qemu-common.h
unconditionally (protection against including files when NEED_CPU_H is
defined is not needed since the removal of AREG0).
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Libvirt has no way to probe if an option or property is supported,
This patch introduces a new qmp command to query command line
option information. hmp command isn't added because it's not needed.
Signed-off-by: Amos Kong <akong@redhat.com>
CC: Luiz Capitulino <lcapitulino@redhat.com>
CC: Osier Yang <jyang@redhat.com>
CC: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Introduces a new utility function: parse_debug_env to avoid code
duplication.
This overrides whatever debug value is set on the corresponding devices
from the command line, and is meant to ease the usage with any
management stack. For libvirt you can set environment variables by
extending the dom namespace, i.e:
<domain type='kvm' id='3' xmlns:qemu='http://libvirt.org/schemas/domain/qemu/1.0'>
<qemu:commandline>
<qemu:env name='QEMU_CCID_PASSTHRU_DEBUG' value='4'/>
<qemu:env name='QEMU_CCID_DEBUG' value='4'/>
</qemu:commandline>
</domain>
Signed-off-by: Alon Levy <alevy@redhat.com>
Reviewed-by: Marc-André Lureau <mlureau@redhat.com>
vscclient needs to call socket_init() for portability.
Moving to osdep.c since it has no internal dependency.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Alon Levy <alevy@redhat.com>
Partial writes can still happen in sendmsg and recvmsg, if a
signal is received in the middle of a write. To handle this,
retry the operation with a new offset/bytes pair.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
"si" and "ei" are merged in a single variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Do not touch the "bytes" argument anymore. Instead, remember the
original length of the last iovec if we touch it, and restore it
afterwards.
This requires undoing the changes in opposite order. The previous
algorithm didn't care.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Once the initial part of the iov is dropped, it is not used anymore.
Modify iov/iovcnt directly instead of adjusting them with the "si"
variable.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Orit Wassermann <owasserm@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Using qemu_memalign only leaves the RAM zero by chance, because libc
will usually use mmap to satisfy our huge requests. But memory will
not be zero when using MALLOC_PERTURB_ with a nonzero value. In the
case of incoming migration, this breaks a recently-introduced
invariant (commit f1c7279, migration: do not sent zero pages in
bulk stage, 2013-03-26).
To fix this, use mmap ourselves to get a well-aligned, always zero
block for the RAM. Mmap-ed memory is easy to "trim" at the sides.
This also removes the need to do something special on valgrind
(see commit c2a8238a, Support running QEMU on Valgrind, 2011-10-31),
thus effectively reverts that patch.
Reviewed-by: Juan Quintela <quintela@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1365522223-20153-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Remove static attribute to Td[0-5] and Te[0-5] tables so that they
can be used outside of aes.c. Change their type from u32 to uint32_t,
to keep the u32 udef local to aes.c. Prefix them with AES_ so that they
do not conflict with other symbols.
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Move aes.h from include/block to include/qemu to show it can be reused
by other subsystems.
Cc: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Allow the clock_gettime() code using monotonic clock to be utilized on
more POSIX compliannt OS's. This started as a fix for OpenBSD which was
listed in one function as part of the previous hard coded list of OS's
for the functions to support but not in the other.
Signed-off-by: Brad Smith <brad@comstyle.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20130405003748.GH884@rox.home.comstyle.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
socket_connect() sets non-blocking on TCP or UNIX domain sockets if a
callback function is passed. Do the same for file descriptor passing,
otherwise we could unexpectedly be using a blocking file descriptor.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The fcntl(fd, F_SETFL, O_NONBLOCK) flag is not specific to sockets.
Rename to qemu_set_nonblock() just like qemu_set_cloexec().
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
this patch adopts the loop unrolling idea of bitmap_is_zero() to
speed up the skipping of large areas with zeros in find_next_bit().
this routine is extensively used to find dirty pages in
live migration.
testing only the find_next_bit performance on a zeroed bitfield
the loop onrolling decreased executing time by approx. 50% on x86_64.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
performance gain on SSE2 is approx. 20-25%. altivec
is not tested. performance for unsigned long arithmetic
is unchanged.
Signed-off-by: Peter Lieven <pl@kamp.de>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Orit Wasserman <owasserm@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
this adds buffer_find_nonzero_offset() which is a SSE2/Altivec
optimized function that searches for non-zero content in a
buffer.
the function starts full unrolling only after the first few chunks have
been checked one by one. analyzing real memory page data has revealed
that non-zero pages are non-zero within the first 256-512 bits in
most cases. as this function is also heavily used to check for zero memory
pages this tweak has been made to avoid the high setup costs of the fully
unrolled check for non-zero pages.
due to the optimizations used in the function there are restrictions
on buffer address and search length. the function
can_use_buffer_find_nonzero_content() can be used to check if
the function can be used safely.
Signed-off-by: Peter Lieven <pl@kamp.de>
Signed-off-by: Juan Quintela <quintela@redhat.com>
# By Kevin Wolf (12) and Peter Lieven (2)
# Via Kevin Wolf
* kwolf/for-anthony:
nbd: Check against invalid option combinations
nbd: Use default port if only host is specified
block: Allow omitting the file name when using driver-specific options
block: Make find_image_format safe with NULL filename
block: Rename variable to avoid shadowing
block: Introduce .bdrv_parse_filename callback
nbd: Accept -drive options for the network connection
nbd: Remove unused functions
nbd: Keep hostname and port separate
qemu-socket: Make socket_optslist public
block: Pass bdrv_file_open() options to block drivers
block: Add options QDict to bdrv_file_open() prototypes
block: complete all IOs before resizing a device
Revert "block: complete all IOs before .bdrv_truncate"
The NBD block supports an URL syntax, for which a URL parser returns
separate hostname and port fields. It also supports the traditional qemu
syntax encoded in a filename. Until now, after parsing the URL to get
each piece of information, a new string is built to be fed to socket
functions.
Instead of building a string in the URL case that is immediately parsed
again, parse the string in both cases and use the QemuOpts interface to
qemu-sockets.c.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Allow other users to create the QemuOpts needed for inet_connect_opts().
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Instead of adding missing type casts which are needed by MinGW for the
4th argument, the patch uses qemu_setsockopt which was invented for this
purpose.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Factor out the hexdumper functionality from iov for all to use. Useful for
creating verbose debug printfery that dumps packet data.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: faaac219c55ea586d3f748befaf5a2788fd271b8.1361853677.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This adds a function that adds all entries of a QDict to a QemuOpts if
the keys are known, and leaves only the rest in the QDict.
This way a single QDict of -drive options can be processed in multiple
places (generic block layer, block driver, backing file block driver,
etc.), where each part picks the options it knows. If at the end of the
process the QDict isn't empty, the user specified an invalid option.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* bonzini/hw-dirs:
sh: move files referencing CPU to hw/sh4/
ppc: move more files to hw/ppc
ppc: move files referencing CPU to hw/ppc/
m68k: move files referencing CPU to hw/m68k/
i386: move files referencing CPU to hw/i386/
arm: move files referencing CPU to hw/arm/
hw: move boards and other isolated files to hw/ARCH
ppc: express FDT dependency of pSeries and e500 boards via default-configs/
build: always link device_tree.o into emulators if libfdt available
hw: include hw header files with full paths
ppc: do not use ../ in include files
vt82c686: vt82c686 is not a PCI host bridge
virtio-9p: remove PCI dependencies from hw/9pfs/
virtio-9p: use CONFIG_VIRTFS, not CONFIG_LINUX
hw: move device-hotplug.o to toplevel, compile it once
hw: move qdev-monitor.o to toplevel directory
hw: move fifo.[ch] to libqemuutil
hw: move char backends to backends/
Conflicts:
backends/baum.c
backends/msmouse.c
hw/a15mpcore.c
hw/arm/Makefile.objs
hw/arm/pic_cpu.c
hw/dataplane/event-poll.c
hw/dataplane/virtio-blk.c
include/char/baum.h
include/char/msmouse.h
qemu-char.c
vl.c
Resolve conflicts caused by header movements.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Lei Li (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
Fix the wrong description in qemu manual
pci_host: Drop write-only address_space field
rng-random: Use qemu_open / qemu_close
configure: Require at least spice-protocol-0.12.3
osdep: replace setsockopt by qemu_setsockopt
lm32: remove unused function
rtc-test: Fix test failures with recent glib
configure: Create link to icon bitmap for out-of-tree builds
Right now the inet connect code tries all available addresses but until one
doesn't fail. It passes local_err each time without clearing it from the
previous failure. This can trigger an assert since the inet connect code
tries to set an error on an object != NULL.
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Message-id: 16c806d60aa5e9660ed7751bb4e37dcd278f97f0.1362505276.git.amit.shah@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fix the compiler warning when cross build qemu-ga
for windows by using qemu_setsockopt() instead of
setsockopt().
util/osdep.c: In function 'socket_set_nodelay':
util/osdep.c:69:5: warning: passing argument 4 of 'setsockopt' from
incompatible pointer type [enabled by default]
In file included from /home/lei/qemu_b/include/sysemu/os-win32.h:30:0,
from /home/lei/qemu_b/include/qemu-common.h:46,
from util/osdep.c:48:
/usr/i686-w64-mingw32/sys-root/mingw/include/winsock2.h:990:63: note:
expected 'const char *' but argument is of type 'int *'
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
ARM Linux (like x86-64 Linux) can use transparent hugepages for
KVM if memory blocks are 2MiB aligned; set QEMU_VMALLOC_ALIGN
accordingly.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
qdev-monitor.c is the only "core qdev" file that is not used in
user-mode emulation, and it does not define anything that is used
by hardware models. Remove it from the hw/ directory and
remove hw/qdev-monitor.h from hw/qdev.h too; this requires
some files to have some new explicitly includes.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The new formulation makes better use of add-with-carry type insns
that the host may have. Use gcc's sign adjustment trick to avoid
having to perform a 128-bit negation.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Replace some x86_64 specific inline assembly with something that
all 64-bit hosts ought to optimize well. At worst this becomes
a call to the gcc __multi3 routine, which is no worse than our
implementation in util/host-utils.c.
With gcc 4.7, we get identical code generation for x86_64. We
now get native multiplication on ia64 and s390x hosts. With minor
improvements to gcc we can get it for ppc64 as well.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The is the only remaining user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
This is the only remaining user.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The use of ctz has already eliminated zero, and thus the difference
in edge conditions between the two routines is irrelevant.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
Both uses of ctz have already eliminated zero, and thus the difference
in edge conditions between the two routines is irrelevant.
Signed-off-by: Richard Henderson <rth@twiddle.net>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
commit 8be7e7e4 and commit ec7b2ccb messed up the ordering of error
message and the helpful explanation that should follow it, like this:
$ qemu-system-x86_64 --nodefaults -S --vnc :0 --chardev null,id=,
Identifiers consist of letters, digits, '-', '.', '_', starting with a letter.
qemu-system-x86_64: -chardev null,id=,: Parameter 'id' expects an identifier
$ qemu-system-x86_64 --nodefaults -S --vnc :0 --machine kvm_shadow_mem=dunno
You may use k, M, G or T suffixes for kilobytes, megabytes, gigabytes and terabytes.
qemu-system-x86_64: -machine kvm_shadow_mem=dunno: Parameter 'kvm_shadow_mem' expects a size
Pity. Disable them for now.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-id: 1360354939-10994-5-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since these values can possibly be sent from guest (for hw/9pfs), do a sanity check
on them. A 9p write request with 0 bytes caused qemu to abort without this patch
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There are lots of duplicate parsing code using strto*() in QEMU, and
most of that code is broken in one way or another. Even the visitors
code have duplicate integer parsing code[1]. This introduces functions
to help parsing unsigned int values: parse_uint() and parse_uint_full().
Parsing functions for signed ints and floats will be submitted later.
parse_uint_full() has all the checks made by opts_type_uint64() at
opts-visitor.c:
- Check for NULL (returns -EINVAL)
- Check for negative numbers (returns -EINVAL)
- Check for empty string (returns -EINVAL)
- Check for overflow or other errno values set by strtoll() (returns
-errno)
- Check for end of string (reject invalid characters after number)
(returns -EINVAL)
parse_uint() does everything above except checking for the end of the
string, so callers can continue parsing the remainder of string after
the number.
Unit tests included.
[1] string-input-visitor.c:parse_int() could use the same parsing code
used by opts-visitor.c:opts_type_int(), instead of duplicating that
logic.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
We had two copies of a ffs function for longs with subtly different
semantics and, for the one in bitops.h, a confusing name: the result
was off-by-one compared to the library function ffsl.
Unify the functions into one, and solve the name problem by calling
the 0-based functions "bitops_ctzl" and "bitops_ctol" respectively.
This also fixes the build on platforms with ffsl, including Mac OS X
and Windows.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Tested-by: Andreas Färber <afaerber@suse.de>
Tested-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
MinGW has no strtok_r, so we need a declaration in sysemu/os-win32.h.
We must also fix the include statements in util/envlist.c to include
that file.
We currently don't need an implementation of strtok_r because the
code is compiled but not linked for MinGW.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
# By Paolo Bonzini (14) and others
# Via Kevin Wolf
* kwolf/for-anthony: (24 commits)
ide: Add fall through annotations
block: Create proper size file for disk mirror
ahci: Add migration support
ahci: Change data types in preparation for migration
ahci: Remove unused AHCIDevice fields
hbitmap: add assertion on hbitmap_iter_init
mirror: do nothing on zero-sized disk
block/vdi: Check for bad signature
block/vdi: Improved return values from vdi_open
block/vdi: Improve debug output for signature
block: Use error code EMEDIUMTYPE for wrong format in some block drivers
block: Add special error code for wrong format
mirror: support arbitrarily-sized iterations
mirror: support more than one in-flight AIO operation
mirror: add buf-size argument to drive-mirror
mirror: switch mirror_iteration to AIO
mirror: allow customizing the granularity
block: allow customizing the granularity of the dirty bitmap
block: return count of dirty sectors, not chunks
mirror: perform COW if the cluster size is bigger than the granularity
...
Rename qemu_vmalloc() to bsd_vmalloc(), adjust the only user.
Remove #ifdeffery in oslib-posix.c.
Tested-by: Andreas Färber <andreas.faerber@web.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
hbitmap_iter_init causes an out-of-bounds access when the "first"
argument is or greater than or equal to the size of the bitmap.
Forbid this with an assertion, and remove the failing testcase.
Reported-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
HBitmaps provides an array of bits. The bits are stored as usual in an
array of unsigned longs, but HBitmap is also optimized to provide fast
iteration over set bits; going from one bit to the next is O(logB n)
worst case, with B = sizeof(long) * CHAR_BIT: the result is low enough
that the number of levels is in fact fixed.
In order to do this, it stacks multiple bitmaps with progressively coarser
granularity; in all levels except the last, bit N is set iff the N-th
unsigned long is nonzero in the immediately next level. When iteration
completes on the last level it can examine the 2nd-last level to quickly
skip entire words, and even do so recursively to skip blocks of 64 words or
powers thereof (32 on 32-bit machines).
Given an index in the bitmap, it can be split in group of bits like
this (for the 64-bit case):
bits 0-57 => word in the last bitmap | bits 58-63 => bit in the word
bits 0-51 => word in the 2nd-last bitmap | bits 52-57 => bit in the word
bits 0-45 => word in the 3rd-last bitmap | bits 46-51 => bit in the word
So it is easy to move up simply by shifting the index right by
log2(BITS_PER_LONG) bits. To move down, you shift the index left
similarly, and add the word index within the group. Iteration uses
ffs (find first set bit) to find the next word to examine; this
operation can be done in constant time in most current architectures.
Setting or clearing a range of m bits on all levels, the work to perform
is O(m + m/W + m/W^2 + ...), which is O(m) like on a regular bitmap.
When iterating on a bitmap, each bit (on any level) is only visited
once. Hence, The total cost of visiting a bitmap with m bits in it is
the number of bits that are set in all bitmaps. Unless the bitmap is
extremely sparse, this is also O(m + m/W + m/W^2 + ...), so the amortized
cost of advancing from one bit to the next is usually constant.
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
g_strdup_printf already handles OOM errors, so some error handling in
QEMU code can be removed.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
It leaks memory and fails to adjust qemu_acl member nentries. Future
acl_add become confused: can misreport the position, and can silently
fail to add.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
On POSIX, qemu_vfree() accepts NULL, because it's merely wrapper
around free(). As far as I can tell, the Windows implementation
doesn't. Breeds bugs that bite only under Windows.
Make the Windows implementation behave like the POSIX implementation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
