The result of (8 - 3 - vlmul) is negative when vlmul >= 6,
and results in wrong vill.
Signed-off-by: demin.han <demin.han@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240225174114.5298-1-demin.han@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After the 'mark_vs_dirty' changes from the previous patch the 'is_store'
bool is unused in some load/store functions that were changed. Remove it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240306171932.549549-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
While discussing a problem with how we're (not) setting vstart_eq_zero
Richard had the following to say w.r.t the conditional mark_vs_dirty()
calls on load/store functions [1]:
"I think it's required to have stores set dirty unconditionally, before
the operation.
Consider a store that traps on the 2nd element, leaving vstart = 2, and
exiting to the main loop via exception. The exception enters the kernel
page fault handler. The kernel may need to fault in the page for the
process, and in the meantime task switch.
If vs dirty is not already set, the kernel won't know to save vector
state on task switch."
Do a mark_vs_dirty() before both loads and stores.
[1] https://lore.kernel.org/qemu-riscv/72c7503b-0f43-44b8-aa82-fbafed2aac0c@linaro.org/
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240306171932.549549-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
mcountinhibit, mcounteren, scounteren and hcounteren must always be 32-bit
by privileged spec
Signed-off-by: Vadim Shakirov <vadim.shakirov@syntacore.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240202113919.18236-1-vadim.shakirov@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
smaia and ssaia were ratified in August 25th 2023 [1].
zvfh and zvfhmin were ratified in August 2nd 2023 [2].
zfbfmin and zvfbf(min|wma) are frozen and moved to public review since
Dec 16th 2023 [3].
zaamo and zalrsc are both marked as "Frozen" since January 24th 2024
[4].
[1] https://jira.riscv.org/browse/RVS-438
[2] https://jira.riscv.org/browse/RVS-871
[3] https://jira.riscv.org/browse/RVS-704
[4] https://jira.riscv.org/browse/RVS-1995
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240301144053.265964-1-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The last KVM extensions added were back in 6.6. Sync them to Linux 6.8.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240304134732.386590-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The idea with this update is to get the latest KVM caps for RISC-V.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240304134732.386590-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Running test-fcvtmod triggers the following deprecation warning:
warning: CPU property 'Zfa' is deprecated. Please use 'zfa' instead
Let's fix that.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240229180656.1208881-1-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
This patch exposes Ztso via hwprobe in QEMU's user space emulator.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207122256.902627-3-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The Ztso extension is already ratified, this adds it as a CPU property
and adds various fences throughout the port in order to allow TSO
targets to function on weaker hosts. We need no fences for AMOs as
they're already SC, the places we need barriers are described.
These fences are placed in the RISC-V backend rather than TCG as is
planned for x86-on-arm64 because RISC-V allows heterogeneous (and
likely soon dynamic) hart memory models.
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Message-ID: <20240207122256.902627-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add a RISC-V 'virt' machine to the graph. This implementation is a
modified copy of the existing arm machine in arm-virt-machine.c
It contains a virtio-mmio and a generic-pcihost controller. The
generic-pcihost controller hardcodes assumptions from the ARM 'virt'
machine, like ecam and pio_base addresses, so we'll add an extra step to
set its parameters after creating it.
Our command line is incremented with 'aclint' parameters to allow the
machine to run MSI tests.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Acked-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240217192607.32565-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The 'virt' machine makes assumptions on the Advanced Core-Local
Interruptor, or aclint, based on 'tcg_enabled()' conditionals. This
will impact MSI related tests support when adding a RISC-V 'virt' libqos
machine. The accelerator used in that case, 'qtest', isn't being
accounted for and we'll error out if we try to enable aclint.
Create a new virt_aclint_allowed() helper to gate the aclint code
considering both TCG and 'qtest' accelerators. The error message is
left untouched, mentioning TCG only, because we don't expect the
regular user to be aware of 'qtest'.
We want to add 'qtest' support for aclint only, leaving the TCG specific
bits out of it. This is done by changing the current format we use
today:
if (tcg_enabled()) {
if (s->have_aclint) { - aclint logic - }
else { - non-aclint, TCG logic - }
}
into:
if (virt_aclint_allowed() && s->have_aclint) {
- aclint logic -
} else if (tcg_enabled()) {
- non-aclint, TCG logic -
}
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We want to add a RISC-V 'virt' libqos machine to increase our test
coverage. Some of the tests will try to plug a virtio-iommu-pci
device into the board and do some tests with it.
Enable virtio-iommu-pci in the 'virt' machine.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Hotplugged FDT nodes will attempt to write this node that, at this
moment, is being created only in create_fdt_pcie() during
finalize_fdt().
Create it earlier.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240217192607.32565-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Enable ACPI NUMA support by adding the following 2 ACPI tables:
SRAT: provides the association for memory/Harts and Proximity Domains
SLIT: provides the relative distance between Proximity Domains
The SRAT RINTC Affinity Structure definition[1] was based on the recently
approved ACPI CodeFirst ECR[2].
[1] https://github.com/riscv-non-isa/riscv-acpi/issues/25
[2] https://mantis.uefi.org/mantis/view.php?id=2433
Signed-off-by: Haibo Xu <haibo1.xu@intel.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240129094200.3581037-1-haibo1.xu@intel.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add missing include guard in pmu.h to avoid the problem of double
inclusion.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Atish Patra <atishp@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240220110907.10479-1-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Added xATP_MODE validation for vsatp/hgatp CSRs.
The xATP register is an SXLEN-bit read/write WARL register, so
the legal value must be returned (See riscv-privileged-20211203, SATP/VSATP/HGATP CSRs).
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240109145923.37893-2-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The SATP register is an SXLEN-bit read/write WARL register. It means that CSR fields are only defined
for a subset of bit encodings, but allow any value to be written while guaranteeing to return a legal
value whenever read (See riscv-privileged-20211203, SATP CSR).
For example on rv64 we are trying to write to SATP CSR val = 0x1000000000000000 (SATP_MODE = 1 - Reserved for standard use)
and after that we are trying to read SATP_CSR. We read from the SATP CSR value = 0x1000000000000000, which is not a correct
operation (return illegal value).
Signed-off-by: Irina Ryapolova <irina.ryapolova@syntacore.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240109145923.37893-1-irina.ryapolova@syntacore.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Named features are extensions which don't make sense for users to
control and are therefore not exposed on the command line. However,
svade is an extension which makes sense for users to control, so treat
it like a "normal" extension. The default is false, even for the max
cpu type, since QEMU has always implemented hardware A/D PTE bit
updating, so users must opt into svade (or get it from a CPU type
which enables it by default).
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Gate hardware A/D PTE bit updating on {m,h}envcfg.ADUE and only
enable menvcfg.ADUE on reset if svade has not been selected. Now
that we also consider svade, we have four possible configurations:
1) !svade && !svadu
use hardware updating and there's no way to disable it
(the default, which maintains past behavior. Maintaining
the default, even with !svadu is a change that fixes [1])
2) !svade && svadu
use hardware updating, but also provide {m,h}envcfg.ADUE,
allowing software to switch to exception mode
(being able to switch is a change which fixes [1])
3) svade && !svadu
use exception mode and there's no way to switch to hardware
updating
(this behavior change fixes [2])
4) svade && svadu
use exception mode, but also provide {m,h}envcfg.ADUE,
allowing software to switch to hardware updating
(this behavior change fixes [2])
Fixes: 0af3f115e6 ("target/riscv: Add *envcfg.HADE related check in address translation") [1]
Fixes: 48531f5adb ("target/riscv: implement svade") [2]
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The hypervisor should decide what it wants to enable. Zero all
configuration enable bits on reset.
Also, commit ed67d63798 ("target/riscv: Update CSR bits name for
svadu extension") missed one reference to 'hade'. Change it now.
Fixes: 0af3f115e6 ("target/riscv: Add *envcfg.HADE related check in address translation")
Fixes: ed67d63798 ("target/riscv: Update CSR bits name for svadu extension")
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Signed-off-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The RVA22U64 and RVA22S64 profiles mandates certain extensions that,
until now, we were implying that they were available.
We can't do this anymore since named features also has a riscv,isa
entry. Let's add them to riscv_cpu_named_features[].
Instead of adding one bool for each named feature that we'll always
implement, i.e. can't be turned off, add a 'ext_always_enabled' bool in
cpu->cfg. This bool will be set to 'true' in TCG accel init, and all
named features will point to it. This also means that KVM won't see
these features as always enable, which is our intention.
If any accelerator adds support to disable one of these features, we'll
have to promote them to regular extensions and allow users to disable it
via command line.
After this patch, here's the riscv,isa from a buildroot using the
'rva22s64' CPU:
# cat /proc/device-tree/cpus/cpu@0/riscv,isa
rv64imafdc_zic64b_zicbom_zicbop_zicboz_ziccamoa_ziccif_zicclsm_ziccrse_
zicntr_zicsr_zifencei_zihintpause_zihpm_za64rs_zfhmin_zca_zcd_zba_zbb_
zbs_zkt_ssccptr_sscounterenw_sstvala_sstvecd_svade_svinval_svpbmt#
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240215223955.969568-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Further discussions after the introduction of rva22 support in QEMU
revealed that what we've been calling 'named features' are actually
regular extensions, with their respective riscv,isa DTs. This is
clarified in [1]. [2] is a bug tracker asking for the profile spec to be
less cryptic about it.
As far as QEMU goes we understand extensions as something that the user
can enable/disable in the command line. This isn't the case for named
features, so we'll have to reach a middle ground.
We'll keep our existing nomenclature 'named features' to refer to any
extension that the user can't control in the command line. We'll also do
the following:
- 'svade' and 'zic64b' flags are renamed to 'ext_svade' and
'ext_zic64b'. 'ext_svade' and 'ext_zic64b' now have riscv,isa strings and
priv_spec versions;
- skip name feature check in cpu_bump_multi_ext_priv_ver(). Now that
named features have a riscv,isa and an entry in isa_edata_arr[] we
don't need to gate the call to cpu_cfg_ext_get_min_version() anymore.
[1] https://github.com/riscv/riscv-profiles/issues/121
[2] https://github.com/riscv/riscv-profiles/issues/142
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Recent changes in options handling removed the 'mmu' default the bare
CPUs had, meaning that we must enable 'mmu' by hand when using the
rva22s64 profile CPU.
Given that this profile is setting a satp mode, it already implies that
we need a 'mmu'. Enable the 'mmu' in this case.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240215223955.969568-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream Linux recently added many additional keys to the hwprobe API.
This patch adds support for all of them with the exception of Ztso,
which is currently not supported in QEMU.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207115926.887816-3-christoph.muellner@vrull.eu>
[ Changes by AF:
- Fixup whitespace
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Upstream Linux recently added RISC-V Zicboz support to the hwprobe API.
This patch introduces this for QEMU's user space emulator.
Signed-off-by: Christoph Müllner <christoph.muellner@vrull.eu>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240207115926.887816-2-christoph.muellner@vrull.eu>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Currently, the initrd is placed at 128MB, which overlaps with the kernel
when it is large (for example syzbot kernels are). From the kernel side,
there is no reason we could not push the initrd further away in memory
to accommodate large kernels, so move the initrd at 512MB when possible.
The ideal solution would have been to place the initrd based on the
kernel size but we actually can't since the bss size is not known when
the image is loaded by load_image_targphys_as() and the initrd would
then overlap with this section.
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240206154042.514698-1-alexghiti@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Generate Serial Port Console Redirection Table (SPCR) for RISC-V
virtual machine.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240129021440.17640-3-jeeheng.sia@starfivetech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
RISC-V should also generate the SPCR in a manner similar to ARM.
Therefore, instead of replicating the code, relocate this function
to the common AML build.
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240129021440.17640-2-jeeheng.sia@starfivetech.com>
[ Changes by AF:
- Add missing Language SPCR entry
]
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The original implementation sets $pc to the address read from the jump
vector table first and links $ra with the address of the next instruction
after the updated $pc. After jumping to the updated $pc and executing the
next ret instruction, the program jumps to $ra, which is in the same
function currently executing, which results in an infinite loop.
This commit stores the jump address in a temporary, updates $ra with the
current $pc, and copies the temporary to $pc.
Signed-off-by: Jason Chien <jason.chien@sifive.com>
Reviewed-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240207081820.28559-1-jason.chien@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The sun4v RTC device model added under commit a0e893039c in 2016
was unfortunately added with a license of GPL-v3-or-later, which is
not compatible with other QEMU code which has a GPL-v2-only license.
Relicense the code in the .c and the .h file to GPL-v2-or-later,
to make it compatible with the rest of QEMU.
Cc: qemu-stable@nongnu.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini (for Red Hat) <pbonzini@redhat.com>
Signed-off-by: Artyom Tarasenko <atar4qemu@gmail.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Acked-by: Alex Bennée <alex.bennee@linaro.org>
Message-id: 20240223161300.938542-1-peter.maydell@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
While the 8-bit input elements are sequential in the input vector,
the 32-bit output elements are not sequential in the output matrix.
Do not attempt to compute 2 32-bit outputs at the same time.
Cc: qemu-stable@nongnu.org
Fixes: 23a5e3859f ("target/arm: Implement SME integer outer product")
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2083
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240305163931.242795-1-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The testcase contains :
- `test_idr_reset_value()` :
Checks the reset values of MODER, OTYPER, PUPDR, ODR and IDR.
- `test_gpio_output_mode()` :
Checks that writing a bit in register ODR results in the corresponding
pin rising or lowering, if this pin is configured in output mode.
- `test_gpio_input_mode()` :
Checks that a input pin set high or low externally results
in the pin rising and lowering.
- `test_pull_up_pull_down()` :
Checks that a floating pin in pull-up/down mode is actually high/down.
- `test_push_pull()` :
Checks that a pin set externally is disconnected when configured in
push-pull output mode, and can't be set externally while in this mode.
- `test_open_drain()` :
Checks that a pin set externally high is disconnected when configured
in open-drain output mode, and can't be set high while in this mode.
- `test_bsrr_brr()` :
Checks that writing to BSRR and BRR has the desired result in ODR.
- `test_clock_enable()` :
Checks that GPIO clock is at the right frequency after enabling it.
Acked-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Message-id: 20240305210444.310665-4-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Features supported :
- the 8 STM32L4x5 GPIOs are initialized with their reset values
(except IDR, see below)
- input mode : setting a pin in input mode "externally" (using input
irqs) results in an out irq (transmitted to SYSCFG)
- output mode : setting a bit in ODR sets the corresponding out irq
(if this line is configured in output mode)
- pull-up, pull-down
- push-pull, open-drain
Difference with the real GPIOs :
- Alternate Function and Analog mode aren't implemented :
pins in AF/Analog behave like pins in input mode
- floating pins stay at their last value
- register IDR reset values differ from the real one :
values are coherent with the other registers reset values
and the fact that AF/Analog modes aren't implemented
- setting I/O output speed isn't supported
- locking port bits isn't supported
- ADC function isn't supported
- GPIOH has 16 pins instead of 2 pins
- writing to registers LCKR, AFRL, AFRH and ASCR is ineffective
Signed-off-by: Arnaud Minier <arnaud.minier@telecom-paris.fr>
Signed-off-by: Inès Varhol <ines.varhol@telecom-paris.fr>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20240305210444.310665-2-ines.varhol@telecom-paris.fr
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Enable all FEAT_ECV features on the 'max' CPU.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-9-peter.maydell@linaro.org
When ID_AA64MMFR0_EL1.ECV is 0b0010, a new register CNTPOFF_EL2 is
implemented. This is similar to the existing CNTVOFF_EL2, except
that it controls a hypervisor-adjustable offset made to the physical
counter and timer.
Implement the handling for this register, which includes control/trap
bits in SCR_EL3 and CNTHCTL_EL2.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-8-peter.maydell@linaro.org
For FEAT_ECV, new registers CNTPCTSS_EL0 and CNTVCTSS_EL0 are
defined, which are "self-synchronized" views of the physical and
virtual counts as seen in the CNTPCT_EL0 and CNTVCT_EL0 registers
(meaning that no barriers are needed around accesses to them to
ensure that reads of them do not occur speculatively and out-of-order
with other instructions).
For QEMU, all our system registers are self-synchronized, so we can
simply copy the existing implementation of CNTPCT_EL0 and CNTVCT_EL0
to the new register encodings.
This means we now implement all the functionality required for
ID_AA64MMFR0_EL1.ECV == 0b0001.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-7-peter.maydell@linaro.org
The functionality defined by ID_AA64MMFR0_EL1.ECV == 1 is:
* four new trap bits for various counter and timer registers
* the CNTHCTL_EL2.EVNTIS and CNTKCTL_EL1.EVNTIS bits which control
scaling of the event stream. This is a no-op for us, because we don't
implement the event stream (our WFE is a NOP): all we need to do is
allow CNTHCTL_EL2.ENVTIS to be read and written.
* extensions to PMSCR_EL1.PCT, PMSCR_EL2.PCT, TRFCR_EL1.TS and
TRFCR_EL2.TS: these are all no-ops for us, because we don't implement
FEAT_SPE or FEAT_TRF.
* new registers CNTPCTSS_EL0 and NCTVCTSS_EL0 which are
"self-sychronizing" views of the CNTPCT_EL0 and CNTVCT_EL0, meaning
that no barriers are needed around their accesses. For us these
are just the same as the normal views, because all our sysregs are
inherently self-sychronizing.
In this commit we implement the trap handling and permit the new
CNTHCTL_EL2 bits to be written.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-6-peter.maydell@linaro.org
Don't allow the guest to write CNTHCTL_EL2 bits which don't exist.
This is not strictly architecturally required, but it is how we've
tended to implement registers more recently.
In particular, bits [19:18] are only present with FEAT_RME,
and bits [17:12] will only be present with FEAT_ECV.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-5-peter.maydell@linaro.org
We prefer the FIELD macro over ad-hoc #defines for register bits;
switch CNTHCTL to that style before we add any more bits.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-4-peter.maydell@linaro.org
The timer _EL02 registers should UNDEF for invalid accesses from EL2
or EL3 when HCR_EL2.E2H == 0, not take a cp access trap. We were
delivering the exception to EL2 with the wrong syndrome.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-3-peter.maydell@linaro.org
cpu.h has a lot of #defines relating to CPU register fields.
Most of these aren't actually used outside target/arm code,
so there's no point in cluttering up the cpu.h file with them.
Move some easy ones to internals.h.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240301183219.2424889-2-peter.maydell@linaro.org
- expand QOS_PATH_MAX_ELEMENT_SIZE to avoid LTO issues
- support fork-follow-mode in gdbstub
- new thread-safe scoreboard API for TCG plugins
- suppress showing opcodes in plugin disassembly
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXoY7oACgkQ+9DbCVqe
KkTdTwf8D8nUB+Ee6LuglW36vtd1ETdMfUmfRis7RIBsXZZ0Tg4+8LyfKkNi1vCL
UMdWQTkSW79RfXr21QEtETokwLZ0CWQMdxDAWfOiz4S+uDgQyBE+lwUsy0mHBmd7
+J4SQb3adoZ+//9KMJhRU1wL9j3ygpEoKHVJonDObU6K5XuhE18JuBE44q7FqkWl
0VhoLDgNxrf2PqT+LLP/O3MFLDXPVKbzrZYQF0IoqBTlcqShCoaykhSwiwCZ4Sqq
NO9hVwZIOFOcOF4F6ZqRXaZrwERldoBwG+BeIx1ah20vKFVT12y02dQqdP/oKwe+
/PXFXDdzs4yMOghb4Go6SiKlKT5g4A==
=s1lF
-----END PGP SIGNATURE-----
Merge tag 'pull-maintainer-updates-060324-1' of https://gitlab.com/stsquad/qemu into staging
maintainer updates (tests, gdbstub, plugins):
- expand QOS_PATH_MAX_ELEMENT_SIZE to avoid LTO issues
- support fork-follow-mode in gdbstub
- new thread-safe scoreboard API for TCG plugins
- suppress showing opcodes in plugin disassembly
# -----BEGIN PGP SIGNATURE-----
#
# iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAmXoY7oACgkQ+9DbCVqe
# KkTdTwf8D8nUB+Ee6LuglW36vtd1ETdMfUmfRis7RIBsXZZ0Tg4+8LyfKkNi1vCL
# UMdWQTkSW79RfXr21QEtETokwLZ0CWQMdxDAWfOiz4S+uDgQyBE+lwUsy0mHBmd7
# +J4SQb3adoZ+//9KMJhRU1wL9j3ygpEoKHVJonDObU6K5XuhE18JuBE44q7FqkWl
# 0VhoLDgNxrf2PqT+LLP/O3MFLDXPVKbzrZYQF0IoqBTlcqShCoaykhSwiwCZ4Sqq
# NO9hVwZIOFOcOF4F6ZqRXaZrwERldoBwG+BeIx1ah20vKFVT12y02dQqdP/oKwe+
# /PXFXDdzs4yMOghb4Go6SiKlKT5g4A==
# =s1lF
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 06 Mar 2024 12:38:18 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* tag 'pull-maintainer-updates-060324-1' of https://gitlab.com/stsquad/qemu: (29 commits)
target/riscv: honour show_opcodes when disassembling
target/loongarch: honour show_opcodes when disassembling
disas/hppa: honour show_opcodes
disas: introduce show_opcodes
plugins: cleanup codepath for previous inline operation
plugins: remove non per_vcpu inline operation from API
contrib/plugins/howvec: migrate to new per_vcpu API
contrib/plugins/hotblocks: migrate to new per_vcpu API
tests/plugin/bb: migrate to new per_vcpu API
tests/plugin/insn: migrate to new per_vcpu API
tests/plugin/mem: migrate to new per_vcpu API
tests/plugin: add test plugin for inline operations
plugins: add inline operation per vcpu
plugins: implement inline operation relative to cpu_index
plugins: define qemu_plugin_u64
plugins: scoreboard API
tests/tcg: Add two follow-fork-mode tests
gdbstub: Implement follow-fork-mode child
gdbstub: Introduce gdb_handle_detach_user()
gdbstub: Introduce gdb_handle_set_thread_user()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-30-alex.bennee@linaro.org>
This makes the output suitable when used for plugins.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-29-alex.bennee@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-28-alex.bennee@linaro.org>
For plugins we don't expect the raw opcodes in the disassembly. We
already deal with this by hand crafting our capstone call but for
other diassemblers we need a flag. Introduce show_opcodes which
defaults to off.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-27-alex.bennee@linaro.org>
Now we have a thread-safe equivalent of inline operation, and that all
plugins were changed to use it, there is no point to keep the old API.
In more, it will help when we implement more functionality (conditional
callbacks), as we can assume that we operate on a scoreboard.
API version bump was already done as part of this series.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-Id: <20240304130036.124418-12-pierrick.bouvier@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240305121005.3528075-25-alex.bennee@linaro.org>
