VFIO migration uAPI defines an optional intermediate P2P quiescent
state. While in the P2P quiescent state, P2P DMA transactions cannot be
initiated by the device, but the device can respond to incoming ones.
Additionally, all outstanding P2P transactions are guaranteed to have
been completed by the time the device enters this state.
The purpose of this state is to support migration of multiple devices
that might do P2P transactions between themselves.
Add support for P2P migration by transitioning all the devices to the
P2P quiescent state before stopping or starting the devices. Use the new
VMChangeStateHandler prepare_cb to achieve that behavior.
This will allow migration of multiple VFIO devices if all of them
support P2P migration.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
There are no config-host.mak symbols anymore that are needed in
config-host.h; the only symbols that are included in config_host_data via
the foreach loop are:
- CONFIG_DEFAULT_TARGETS, which is not used by C code.
- CONFIG_TCG and CONFIG_TCG_INTERPRETER, which are not part of config-host.mak
So, list these two symbols explicitly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Stop applying config-host.mak to the sourcesets, since it does not
have any more CONFIG_* symbols coming from the command line.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
I've already wasted enough of my time debugging aliased variables in
deeply nested loops. While not scattering variable declarations around
is a good aim I think we can make an exception for stuff used inside a
loop.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-5-alex.bennee@linaro.org>
The `ccache` tool can be very effective at reducing compilation times
when re-running pipelines with only minor changes each time. For example
a fresh 'build-system-fedora' job will typically take 20 minutes on the
gitlab.com shared runners. With ccache this is reduced to as little as
6 minutes.
Normally meson would auto-detect existance of ccache in $PATH and use
it automatically, but the way we wrap meson from configure breaks this,
as we're passing in an config file with explicitly set compiler paths.
Thus we need to add $CCACHE_WRAPPERSPATH to the front of $PATH. For
unknown reasons if doing this in msys though, gcc becomes unable to
invoke 'cc1' when run from meson. For msys we thus set CC='ccache gcc'
before invoking 'configure' instead.
A second problem with msys is that cache misses are incredibly
expensive, so enabling ccache massively slows down the build when
the cache isn't well populated. This is suspected to be a result of
the cost of spawning processes under the msys architecture. To deal
with this we set CCACHE_DEPEND=1 which enables ccache's 'depend_only'
strategy. This avoids extra spawning of the pre-processor during
cache misses, with the downside that is it less likely ccache will
find a cache hit after semantically benign compiler flag changes.
This is the lesser of two evils, as otherwise we can't use ccache
at all under msys and remain inside the job time limit.
If people are finding ccache to hurt their pipelines, it can be
disabled by setting the 'CCACHE_DISABLE=1' env variable against
their gitlab fork CI settings.
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230804111054.281802-2-berrange@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230829161528.2707696-2-alex.bennee@linaro.org>
This reverts commit e8e4298fea.
ensuregroup allows to specify both the acceptable versions of avocado,
and a locked version to be used when avocado is not installed as a system
pacakge. This lets us install avocado in pyvenv/ using "mkvenv.py" and
reuse the distro package on Fedora and CentOS Stream (the only distros
where it's available).
ensuregroup's usage of "(>=..., <=...)" constraints when evaluating
the distro package, and "==" constraints when installing it from PyPI,
makes it possible to avoid conflicts between the known-good version and
a package plugins included in the distro.
This is because package plugins have "==" constraints on the version
that is included in the distro, and, using "pip install avocado==88.1"
on a venv that includes system packages will result in an error:
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
But at the same time, if the venv does not include a system distribution
of avocado then we can install a known-good version and stick to LTS
releases.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/1663
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This unintentionally causes the mov_vec, ld_vec and st_vec operations
to appear on the same line.
Signed-off-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230823141740.35974-1-mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce a new opcode for negative setcond.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230730180329.851576-1-sw@weilnetz.de>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
We have postcopy recovery but not reflected in the document, do an update
for that.
Add a very small section on postcopy preempt.
Touch up the pagemap section, dropping the unsent map because it's already
been dropped in the source code in commit 1e7cf8c323 ("migration/postcopy:
unsentmap is not necessary for postcopy").
Touch up the postcopy section to remove "network connection" failures as
downside, because now it's not fatal and can be recovered. Suggested by
Laszlo.
Acked-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Message-ID: <20230706115611.371048-1-peterx@redhat.com>
Signed-off-by: Juan Quintela <quintela@redhat.com>
The test fails occasionally, see e.g.:
https://gitlab.com/thuth/qemu/-/jobs/4196177756#L489https://gitlab.com/thuth/qemu/-/jobs/4623296271#L290
It also fails on my laptop in ca. 50% of all runs. Thus disable it by
default by using the QEMU_TEST_FLAKY_TESTS environment variable to fence
it (which we also already use in flaky qtests). While we're at it, also
document this variable in docs/devel/testing.rst.
Message-Id: <20230710170155.7192-1-thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
As defined earlier in this file, the opening curly brace of
functions should be placed on a separate line. So we should
do it in the examples here, too.
Fixes: 821f296756 ("docs: document use of automatic cleanup functions in glib")
Reported-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20230710092638.161625-1-thuth@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Using QOM correctly is increasingly important to maintaining a modern
code base. However the current documentation skips some important
concepts before launching into a simple example. Lets:
- at least mention properties
- mention TYPE_OBJECT and TYPE_DEVICE
- talk about why we have realize/unrealize
- mention the QOM tree
- lightly re-arrange the order we mention things
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-28-alex.bennee@linaro.org>
Lets try and keep the overview of the sub-system digestible by
splitting the core API stuff into a separate file. As QOM and QDEV
work together we should also try and enumerate the qdev_ functions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-27-alex.bennee@linaro.org>
Per commit 067109a11c ("docs/devel: mention the spacing requirement
for QOM"):
For a storage structure the first declaration should always be
called “parent_obj” and for a class structure the first member
should always be called “parent_class”
Adapt the QOM rST document accordingly.
Reported-by: BALATON Zoltan <balaton@eik.bme.hu>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20230622101717.70468-1-philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-26-alex.bennee@linaro.org>
Give an overview of the most useful bits of the devel documentation to
read depending on what the developer wants to do.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-23-alex.bennee@linaro.org>
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230506072012.10350-1-anisinha@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20230630180423.558337-5-alex.bennee@linaro.org>
Loading of a VFIO device's data can take a substantial amount of time as
the device may need to allocate resources, prepare internal data
structures, etc. This can increase migration downtime, especially for
VFIO devices with a lot of resources.
To solve this, VFIO migration uAPI defines "initial bytes" as part of
its precopy data stream. Initial bytes can be used in various ways to
improve VFIO migration performance. For example, it can be used to
transfer device metadata to pre-allocate resources in the destination.
However, for this to work we need to make sure that all initial bytes
are sent and loaded in the destination before the source VM is stopped.
Use migration switchover ack capability to make sure a VFIO device's
initial bytes are sent and loaded in the destination before the source
stops the VM and attempts to complete the migration.
This can significantly reduce migration downtime for some devices.
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Pre-copy support allows the VFIO device data to be transferred while the
VM is running. This helps to accommodate VFIO devices that have a large
amount of data that needs to be transferred, and it can reduce migration
downtime.
Pre-copy support is optional in VFIO migration protocol v2.
Implement pre-copy of VFIO migration protocol v2 and use it for devices
that support it. Full description of it can be found in the following
Linux commit: 4db52602a607 ("vfio: Extend the device migration protocol
with PRE_COPY").
Signed-off-by: Avihai Horon <avihaih@nvidia.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Tested-by: YangHang Liu <yanghliu@redhat.com>
Acked-by: Alex Williamson <alex.williamson@redhat.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
Since commit 93cc0506f6 ("tests/docker: Use Fedora containers
for MinGW cross-builds in the gitlab-CI") the MinGW toolchain
is packaged inside the fedora-win[32/64]-cross images.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230624142211.8888-2-philmd@linaro.org>
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
+ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
=Do8p
-----END PGP SIGNATURE-----
Merge tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu into staging
virtio,pc,pci: fixes, features, cleanups
asymmetric crypto support for cryptodev-vhost-user
rom migration when rom size changes
poison get, inject, clear; mock cxl events and irq support for cxl
shadow virtqueue offload support for vhost-vdpa
vdpa now maps shadow vrings with MAP_SHARED
max_cpus went up to 1024 and we default to smbios 3.0 for pc
Fixes, cleanups all over the place. In particular
hw/acpi: Fix PM control register access
works around a very long standing bug in memory core.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEXQn9CHHI+FuUyooNKB8NuNKNVGkFAmSZl5EPHG1zdEByZWRo
# YXQuY29tAAoJECgfDbjSjVRph+8H/RZodqCadmQ1evpeWs7RBSvJeZgbJTVl/9/h
# +ObvEmVz2+X4D+O1Kxh54vDV0SNVq3XjyrFy3Ur57MAR6r2ZWwB6HySaeFdi4zIm
# N0SMkfUylDnf7ulyjzJoXDzHOoFnqAM6fU/jcoQXBIdUeeqwPrzLOZHrGrwevPWK
# iH5JP66suOVlBuKLJjlUKI3/4vK3oTod5Xa3Oz2Cw1oODtbIa97N8ZAdBgZd3ah9
# 7mjZjcH54kFRwfidz/rkpY5NMru8BlD54MyEOWofvTL2w7aoWmVO99qHEK+SjLkG
# x4Mx3aYlnOEvkJ+5yBHvtXS4Gc5T9ltY84AvcwPNuz4RKCORi1s=
# =Do8p
# -----END PGP SIGNATURE-----
# gpg: Signature made Mon 26 Jun 2023 03:50:09 PM CEST
# gpg: using RSA key 5D09FD0871C8F85B94CA8A0D281F0DB8D28D5469
# gpg: issuer "mst@redhat.com"
# gpg: Good signature from "Michael S. Tsirkin <mst@kernel.org>" [undefined]
# gpg: aka "Michael S. Tsirkin <mst@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 0270 606B 6F3C DF3D 0B17 0970 C350 3912 AFBE 8E67
# Subkey fingerprint: 5D09 FD08 71C8 F85B 94CA 8A0D 281F 0DB8 D28D 5469
* tag 'for_upstream' of https://git.kernel.org/pub/scm/virt/kvm/mst/qemu: (53 commits)
vhost-vdpa: do not cleanup the vdpa/vhost-net structures if peer nic is present
vhost_net: add an assertion for TAP client backends
intel_iommu: Fix address space unmap
intel_iommu: Fix flag check in replay
intel_iommu: Fix a potential issue in VFIO dirty page sync
vhost-user: fully use new backend/frontend naming
virtio-scsi: avoid dangling host notifier in ->ioeventfd_stop()
hw/i386/pc: Clean up pc_machine_initfn
vdpa: fix not using CVQ buffer in case of error
vdpa: mask _F_CTRL_GUEST_OFFLOADS for vhost vdpa devices
vhost: fix vhost_dev_enable_notifiers() error case
vdpa: Allow VIRTIO_NET_F_CTRL_GUEST_OFFLOADS in SVQ
vdpa: Add vhost_vdpa_net_load_offloads()
virtio-net: expose virtio_net_supported_guest_offloads()
hw/net/virtio-net: make some VirtIONet const
vdpa: reuse virtio_vdev_has_feature()
include/hw/virtio: make some VirtIODevice const
vdpa: map shadow vrings with MAP_SHARED
vdpa: reorder vhost_vdpa_net_cvq_cmd_page_len function
vdpa: do not block migration if device has cvq and x-svq=on
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The CI rules have special logic for what happens in upstream. To enable
contributors who modify CI rules to test this logic, however, they need
to be able to override which repo is considered upstream. This
introduces the 'QEMU_CI_UPSTREAM' variable
git push gitlab <branch> -o ci.variable=QEMU_CI_UPSTREAM=berrange
to make it look as if my namespace is the actual upstream. Namespace in
this context refers to the path fragment in gitlab URLs that is above
the repository. Typically this will be the contributor's gitlab login
name.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-3-berrange@redhat.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
We use a fixed container tag of 'latest' so that contributors' forks
don't end up with an ever growing number of containers as they work
on throwaway feature branches.
This fixed tag causes problems running CI upstream in stable staging
branches, however, because the stable staging branch will publish old
container content that clashes with that needed by primary staging
branch. This makes it impossible to reliably run CI pipelines in
parallel in upstream for different staging branches.
This introduces $QEMU_CI_CONTAINER_TAG global variable as a way to
change which tag container publishing uses. Initially it can be set
by contributors as a git push option if they want to override the
default use of 'latest' eg
git push gitlab <branch> -o ci.variable=QEMU_CONTAINER_TAG=fish
this is useful if contributors need to run pipelines for different
branches concurrently in their forks.
Reviewed-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230608164018.2520330-2-berrange@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CXL has 24 bit unaligned fields which need to be stored to. CXL is
specified as little endian.
Define st24_le_p() and the supporting functions to store such a field
from a 32 bit host native value.
The use of b, w, l, q as the size specifier is limiting. So "24" was
used for the size part of the function name.
Reviewed-by: Fan Ni <fan.ni@samsung.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ira Weiny <ira.weiny@intel.com>
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Message-Id: <20230526170010.574-2-Jonathan.Cameron@huawei.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
We use the user_ss[] array to hold the user emulation sources,
and the softmmu_ss[] array to hold the system emulation ones.
Hold the latter in the 'system_ss[]' array for parity with user
emulation.
Mechanical change doing:
$ sed -i -e s/softmmu_ss/system_ss/g $(git grep -l softmmu_ss)
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230613133347.82210-10-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
This reverts commits eea2d14117 ("Makefile: remove $(TESTS_PYTHON)",
2023-05-26) and 9c6692db55 ("tests: Use configure-provided pyvenv for
tests", 2023-05-18).
Right now, there is a conflict between wanting a ">=" constraint when
using a distro-provided package and wanting a "==" constraint when
installing Avocado from PyPI; this would provide the best of both worlds
in terms of resiliency for both distros that have required packages and
distros that don't.
The conflict is visible also for meson, where we would like to install
the latest 0.63.x version but also accept a distro 1.1.x version.
But it is worse for avocado, for two reasons:
1) we cannot use an "==" constraint to install avocado if the venv
includes a system avocado. The distro will package plugins that have
"==" constraints on the version that is included in the distro, and, using
"pip install avocado==88.1" on a venv that includes system packages will
result in this error:
ERROR: pip's dependency resolver does not currently take into account all the packages that are installed. This behaviour is the source of the following dependency conflicts.
avocado-framework-plugin-varianter-yaml-to-mux 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
avocado-framework-plugin-result-html 98.0 requires avocado-framework==98.0, but you have avocado-framework 88.1 which is incompatible.
make[1]: Leaving directory '/home/berrange/src/virt/qemu/build'
2) we cannot use ">=" either if the venv does _not_ include a system
avocado, because that would result in the installation of v101.0 which
is the one we've just reverted.
So the idea is to encode the dependencies as an (acceptable, locked)
tuple, like this hypothetical TOML that would be committed inside
python/ and used by mkvenv.py:
[meson]
meson = { minimum = "0.63.0", install = "0.63.3", canary = "meson" }
[docs]
# 6.0 drops support for Python 3.7
sphinx = { minimum = "1.6", install = "<6.0", canary = "sphinx-build" }
sphinx_rtd_theme = { minimum = "0.5" }
[avocado]
avocado-framework = { minimum = "88.1", install = "88.1", canary = "avocado" }
Once this is implemented, it would also be possible to install avocado in
pyvenv/ using "mkvenv.py ensure", thus using the distro package on Fedora
and CentOS Stream (the only distros where it's available). But until
this is implemented, keep avocado in a separate venv. There is still the
benefit of using a single python for meson custom_targets and for sphinx.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qatomic_mb_read and qatomic_mb_set were the very first atomic primitives
introduced for QEMU; their semantics are unclear and they provide a false
sense of safety.
The last use of qatomic_mb_read() has been removed, so delete it.
qatomic_mb_set() instead can survive as an optimized
qatomic_set()+smp_mb(), similar to Linux's smp_store_mb(), but
rename it to qatomic_set_mb() to match the order of the two
operations.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Document the named field syntax that we want to implement for the
decodetree script. This allows a field to be defined in terms of
some other field that the instruction pattern has already set, for
example:
%sz_imm 10:3 sz:3 !function=expand_sz_imm
to allow a function to be passed both an immediate field from the
instruction and also a sz value which might have been specified by
the instruction pattern directly (sz=1, etc) rather than being a
simple field within the instruction.
Note that the restriction on not having the format referring to the
pattern and the pattern referring to the format simultaneously is a
restriction of the decoder generator rather than inherently being a
silly thing to do.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20230523120447.728365-3-peter.maydell@linaro.org>
Convert the qmp-spec.txt document to restructuredText.
Notable points about the conversion:
* numbers at the start of section headings are removed, to match
the style of the rest of the manual
* cross-references to other sections or documents are hyperlinked
* various formatting tweaks (notably the examples, which need the
-> and <- prefixed so the QMP code-block lexer will accept them)
* English prose fixed in a few places
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20230515162245.3964307-2-peter.maydell@linaro.org>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
[.. code-block:: dumbed down to :: to work around CI failure]
configure is only doing compiler and host setup now, so adjust the
relevant documentation. It is also possible to build emulators with
ninja directly if one is so inclined, so mention that as well.
The Python virtual environment set up is a new major task of configure
as well. Mention it in the list of produced files, while leaving it
for a future patch to document how it works and how ``mkvenv ensure``
is used.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
All uses of pkg-config have been moved to Meson.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The option is new in Meson 0.63 and removes the need to pass "static:
true" to all dependency and find_library invocation. Actually cleaning
up the invocations is left for a separate patch.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch changes how the avocado tests are provided, ever so
slightly. Instead of creating a new testing venv, use the
configure-provided 'pyvenv' instead, and install optional packages into
that.
Signed-off-by: John Snow <jsnow@redhat.com>
Message-Id: <20230511035435.734312-20-jsnow@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add opcodes for backend support for 128-bit memory operations.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
With the current structure of cputlb.c, there is no difference
between the little-endian and big-endian entry points, aside
from the assert. Unify the pairs of functions.
Hoist the qemu_{ld,st}_helpers arrays to tcg.c.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When new dependencies and packages are added to containers, its important to
run CI container generation pipelines on gitlab to make sure that there are no
obvious conflicts between packages that are being added and those that are
already present. Running CI container pipelines will make sure that there are
no such breakages before we commit the change updating the containers. Add a
line in the documentation reminding developers to run the pipeline before
submitting the change. It will also ease the life of the maintainers.
Signed-off-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20230506072012.10350-1-anisinha@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add the documentation about the example of using virtio-blk driver
to pass the zoned block devices through to the guest.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Message-id: 20230508051916.178322-5-faithilikerun@gmail.com
[Fix pre-formatted code syntax
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add the documentation about the zoned device support to virtio-blk
emulation.
Signed-off-by: Sam Li <faithilikerun@gmail.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Dmitry Fomichev <dmitry.fomichev@wdc.com>
Acked-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-id: 20230508045533.175575-9-faithilikerun@gmail.com
Message-id: 20230324090605.28361-9-faithilikerun@gmail.com
[Add index-api.rst to fix "zoned-storage.rst:document isn't included in
any toctree" error and fix pre-formatted code syntax.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
-----BEGIN PGP SIGNATURE-----
iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
+weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
l6cRIXTXHeQe
=j6cJ
-----END PGP SIGNATURE-----
Merge tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru into staging
QAPI patches patches for 2023-05-09
# -----BEGIN PGP SIGNATURE-----
#
# iQJGBAABCAAwFiEENUvIs9frKmtoZ05fOHC0AOuRhlMFAmRbUEYSHGFybWJydUBy
# ZWRoYXQuY29tAAoJEDhwtADrkYZTmzEP/3pDpVxpP7xXLevl2vFqkFyHEjc0L3N4
# x//ljgQojAdM6WU3e0qqOfp/NE2ktUg5D3z+QNiVP1/xXv/dtMGATdG+X9AZs0US
# XnhdicYdBng8bGuhlNuNY8QJ/I4ALwUR44LVOYibVohv2RVYWBapGiHowpyTyABq
# sFSHrj/cgvTMUn53yp7veZTo6rWG6RU/D5uUTOMsvKeAoHoOXMyBxV01SCt84t/J
# pcelINcriP6cQVzgfm1B39UNa0IxinGxEx/IIaxz5Ju66G05HTs4CsBFAF6/0QI/
# 3YerGWPt9fF6+qYNn21Gg9CL1fHHppNqTXkcuTeGn/Ohg53bosktti5Ysn73vtpR
# GWsJr6M4KQ1SwEbZIiFZCS3A4VTbRcr7WkXets39pcpxGDlNisi+zfV95kNo09xR
# hxi8SuWgb2OfQpVs/71eunp+PM1ZQsODurcy4x0/rlYJfhk53kQSMRtlfy5Cn6uY
# +weWUgygBSWG/w0qanWWK5TF1DNlRKzbix6cmMuGGKcpyF7EMWE1kqmjmmu7CQvM
# a3aPTqGtUt0LeqBQIhmeq/jEwd3vxQa1R85gd0/0sWxEMHkPXVfVoaryiaWAykye
# 7r+c8o/41c44zs8YxdZrz72su9fqKC/TeVf5soU46ZucmH8D6f7QHy+s1ec2PEjY
# l6cRIXTXHeQe
# =j6cJ
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 10 May 2023 09:05:26 AM BST
# gpg: using RSA key 354BC8B3D7EB2A6B68674E5F3870B400EB918653
# gpg: issuer "armbru@redhat.com"
# gpg: Good signature from "Markus Armbruster <armbru@redhat.com>" [undefined]
# gpg: aka "Markus Armbruster <armbru@pond.sub.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 354B C8B3 D7EB 2A6B 6867 4E5F 3870 B400 EB91 8653
* tag 'pull-qapi-2023-05-09-v2' of https://repo.or.cz/qemu/armbru:
qapi: Reformat doc comments to conform to current conventions
qga/qapi-schema: Reformat doc comments to conform to current conventions
docs/devel/qapi-code-gen: Update doc comment conventions
qapi: Section parameter @indent is no longer used, drop
qapi: Relax doc string @name: description indentation rules
qapi: Rewrite parsing of doc comment section symbols and tags
qapi: Fix argument description indentation stripping
tests/qapi-schema/doc-good: Improve argument description tests
tests/qapi-schema/doc-good: Improve a comment
qapi/dump: Indent bulleted lists consistently
qapi: Tidy up a slightly awkward TODO comment
sphinx/qapidoc: Do not emit TODO sections into user manuals
Revert "qapi: BlockExportRemoveMode: move comments to TODO"
meson: Fix to make QAPI generator output depend on main.py
qapi: Fix crash on stray double quote character
docs/devel/qapi-code-gen: Turn FIXME admonitions into comments
docs/devel/qapi-code-gen: Clean up use of quotes a bit
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The commit before previous relaxed the indentation rules to let us
improve the doc comment conventions. This commit changes the written
conventions. The next commits will update QAPI schemas to conform to
them.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-16-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
The QAPI schema doc comment language provides special syntax for
command and event arguments, struct and union members, alternate
branches, enumeration values, and features: descriptions starting with
"@name:".
By convention, we format them like this:
# @name: Lorem ipsum dolor sit amet, consectetur adipiscing elit,
# sed do eiusmod tempor incididunt ut labore et dolore
# magna aliqua.
Okay for names as short as "name", but we have much longer ones. Their
description gets squeezed against the right margin, like this:
# @dirty-sync-missed-zero-copy: Number of times dirty RAM synchronization could
# not avoid copying dirty pages. This is between
# 0 and @dirty-sync-count * @multifd-channels.
# (since 7.1)
The description text is effectively just 50 characters wide. Easy
enough to read, but can be cumbersome to write.
The awkward squeeze against the right margin makes people go beyond it,
which produces two undesirables: arguments about style, and descriptions
that are unnecessarily hard to read, like this one:
# @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU. This is
# only present when the postcopy-blocktime migration capability
# is enabled. (Since 3.0)
We could instead format it like
# @postcopy-vcpu-blocktime:
# list of the postcopy blocktime per vCPU. This is only present
# when the postcopy-blocktime migration capability is
# enabled. (Since 3.0)
or, since the commit before previous, like
# @postcopy-vcpu-blocktime:
# list of the postcopy blocktime per vCPU. This is only present
# when the postcopy-blocktime migration capability is
# enabled. (Since 3.0)
However, I'd rather have
# @postcopy-vcpu-blocktime: list of the postcopy blocktime per vCPU.
# This is only present when the postcopy-blocktime migration
# capability is enabled. (Since 3.0)
because this is how rST field and option lists work.
To get this, we need to let the first non-blank line after the
"@name:" line determine expected indentation.
This fills up the indentation pitfall mentioned in
docs/devel/qapi-code-gen.rst. A related pitfall still exists. Update
the text to show it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-14-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
[Work around lack of walrus operator in Python 3.7 and older]
QAPI doc comments are for QMP users: they go into the "QEMU QMP
Reference Manual" and the "QEMU Storage Daemon QMP Reference Manual".
The doc comment TODO sections are for somebody else, namely for the
people who can do: developers. Do not emit them into the user
manuals.
This elides the following TODOs:
* SchemaInfoCommand
# TODO: @success-response (currently irrelevant, because it's QGA, not QMP)
This is a note to developers adding introspection to the guest
agent. It makes no sense to users.
* @query-hotpluggable-cpus
# TODO: Better documentation; currently there is none.
This is a reminder for developers. It doesn't help users.
* @device_add
# TODO: This command effectively bypasses QAPI completely due to its
# "additional arguments" business. It shouldn't have been added to
# the schema in this form. It should be qapified properly, or
# replaced by a properly qapified command.
Likewise.
Eliding them is an improvement.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-7-armbru@redhat.com>
Reviewed-by: Ani Sinha <anisinha@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
We have two FIXME notes. These FIXMEs are for QAPI developers. They
are not useful for QAPI schema developers. They are marked up as
admonitions, which makes them look important in generated HTML.
Turn them into comments. QAPI developers will still see them (they
read and write the .rst). QAPI schema developers may still see
them (if they read the .rst instead of the generated .html), but "this
is just for QAPI developers" should be more obvious.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-3-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Section "Definition documentation" uses both single and double quotes
around doc text snippets. Stick to double quotes.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230428105429.1687850-2-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
--without-default-devices is a specialized option that should only be used
when configs/devices/ is changed manually.
Explain the model towards which we should tend, with respect to failures
to start guests and to run "make check".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20230427095346.1238913-1-armbru@redhat.com>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
