DisplayChangeListener gets a new QemuConsole field, which can be set to
non-NULL before registering. This will pin the QemuConsole, so that
particular DisplayChangeListener will not follow console switches.
spice+gtk (which don't support text console input anyway) are switched
over to be pinned to console 0, which usually is the graphical display.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
xenfb informs the guest about the gui refresh interval so it can avoid
pointless work. That logic was temporarely disabled for the
DisplayState reorganization. Restore it now, with a proper interface
for it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pass a single GraphicHwOps struct pointer to graphic_console_init,
instead of a bunch of function pointers.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Screendumps are alot simpler as we can update non-active
QemuConsoles now. So we only need to update the QemuConsole
we want write out, then dump the DisplaySurface content into
a ppm file. Done.
No console switching needed. No special support code in the
gfx card emulation needed. Zap it all. Also move ppm_save
out of the vga code and next to the qmp_screendump function.
For now screen dumping is limited to console #0 (like it used
to be), even though it is dead simple to extend it to other
consoles. I wanna finish the console cleanup before setting
new qapi interfaces into stone.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Tested-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Add QemuConsole parameter to vga_hw_*, so the interface allows to update
non-active consoles (the actual code can't handle this yet, see next
patch). Passing NULL is allowed and updates the active console, like
the functions do today.
While touching all vga_hw_* calls anyway rename that to the functions to
hardware-neutral graphics_hw_*
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Hardcode depth to 32 bpp. It effectively was that way before because
that is the default surface depth, this just makes it explicit in the
code.
Rename depth to new_depth to make it consistent with the new_width +
new_height names. In theory we can make new_depth changeable (i.e.
allow the guest to fill in -- say -- 16 there). In practice the guests
don't try, the X-Server refuses to start if you ask it to use 16bpp
depth (via DefaultDepth in the Screen section).
Always return the correct rmask+gmask+bmask values for the given
new_depth.
Fix mode setting to also verify at new_depth to make sure we have a
correct DisplaySurface, even if the current video mode happes to be
16bpp (set by vgabios via bochs vbe interface). While being at it
switch over to use qemu_create_displaysurface_from, so the surface is
backed by guest-visible video memory and we save a memcpy.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In vmsvga display update function, a pointer to DisplaySurface must be acquired
after a call to vmsvga_check_size since this function might replace current
DisplaySurface with a new one.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
In exynos4210 display update function, we were acquiring DisplaySurface
pointer before calling screen resize function, not paying attention that resize
procedure can replace current DisplaySurface with newly allocated one.
Right thing to do is to initialize DisplaySurface AFTER a call to resize function.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Currently device_set_realized() sets parent only after device was realized,
but qdev_device_add() sets it before device is realized.
Make behavior consistent and alter device_set_realized() to behave like
qdev_device_add().
It will allow to set link<> properties in realize() method in classes
inherited from DEVICE.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
... and define type name and type cast macro for kvmvapic according
to accepted convention.
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
To keep compatibility with the old virtio-balloon-x, add the dynamic properties
to virtio-balloon-pci and virtio-balloon-ccw.
Cc: Luiz Capitulino <lcapitulino@redhat.com>
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1365941220-8114-1-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
* bonzini/hw-dirs:
exec: remove useless declarations from memory-internal.h
memory: move core typedefs to qemu/typedefs.h
include: avoid useless includes of exec/ headers
sysemu: avoid proliferation of include/ subdirectories
tpm: reorganize headers and split hardware part
configure: fix TPM logic
acpi.h: make it self contained
acpi: move declarations from pc.h to acpi.h
hw: Add lost ARM core again
Fix failure to create q35 machine
Add linux-headers to QEMU_INCLUDES
arm: fix location of some include files
Conflicts:
configure
aliguori: trivial conflict in configure output
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Since commit 249d41720b (qdev: Prepare
"realized" property) setting realized = true would register the device's
VMStateDescription, but realized = false would not unregister it. Fix that.
Moving the code from unparenting also revealed that we were calling
DeviceClass::init through DeviceClass::realize as interim solution but
DeviceClass::exit still at unparenting time with a realized check.
Make this symmetrical by implementing DeviceClass::unrealize to call it,
while we're setting realized = false in the unparenting path.
The only other unrealize user is mac_nvram, which can safely override it.
Thus, mark DeviceClass::exit as obsolete, new devices should implement
DeviceClass::unrealize instead.
Cc: qemu-stable@nongnu.org
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Message-id: 1366043650-9719-1-git-send-email-afaerber@suse.de
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Headers in include/exec/ are for the deepest innards of QEMU,
they should almost never be included directly.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The TPM subsystem does not have a full front-end/back-end separation.
The sole available backend, tpm_passthrough, depends on the data
structures of the sole available frontend, tpm_tis.
However, we can at least try to split the user interface (tpm.c) from the
implementation (hw/tpm). The patches makes tpm.c not include tpm_int.h,
which is shared between tpm_tis.c and tpm_passthrough.c; instead it
moves more stuff to tpm_backend.h.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The qdev field is no longer needed, just drop it.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-serial-pci and virtio-serial-s390 are switched to the new
API, we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-ccw is modified for the new API. The device
virtio-serial-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-serial during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-s390 is modified for the new API. The device
virtio-serial-s390 extends virtio-s390-device as before. It creates and
connects a virtio-serial during the init. The properties are not
modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-serial-pci is modified for the new API. The device
virtio-serial-pci extends virtio-pci. It creates and connects a
virtio-serial during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-serial which extends virtio-device, so it can be connected
on virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Reviewed-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Acked-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1365512016-21944-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Functions defined in acpi/ should be declared in
acpi.h
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The recent rearrangement of include files had some minor errors:
devices.h is not ARM specific and should not be in arm/
arm.h should be in arm/
Move these two headers to correct this.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
What is the highest addressable sector on an empty CD-ROM? Nothing is
addressable so produce an error.
This patch prevents a divide-by-zero in ide_set_sector() since
s->sectors and s->heads would be 0. Not to mention that a sector=-1
argument would be nonsense.
Note that WIN_READ_NATIVE_MAX can be triggered using hdparm -N 1024
/dev/cdrom. The LBA bit will be set to 1 though, so the only easy way
to go down the ide_set_sector() CHS code path which divides by zero is
to comment out the s->select & 0x40 case for testing.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
This brings us a step closer to QOM'ified SH7750 SoC and
fixes b350ab75 (target-sh4: Move PVR/PRR/CVR into SuperHCPUClass)
assuming SuperHCPU type for SUPERH_CPU_GET_CLASS().
Fix Coding Style issues while at it (indentation, braces).
Reported-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Print an error message as done for the r2d machine and exit.
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
Minor fixes to documentation and code comments.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
# By Paolo Bonzini
# Via Paolo Bonzini
* bonzini/hw-dirs: (35 commits)
hw: move private headers to hw/ subdirectories.
MAINTAINERS: update for source code movement
hw: move last file to hw/arm/
hw: move hw/kvm/ to hw/i386/kvm
hw: move ARM CPU cores to hw/cpu/, configure with default-configs/
hw: move other devices to hw/misc/, configure with default-configs/
hw: move NVRAM interfaces to hw/nvram/, configure with default-configs/
hw: move GPIO interfaces to hw/gpio/, configure with default-configs/
hw: move interrupt controllers to hw/intc/, configure with default-configs/
hw: move DMA controllers to hw/dma/, configure with default-configs/
hw: move VFIO and ivshmem to hw/misc/
hw: move PCI bridges to hw/pci-* or hw/ARCH
hw: move SD/MMC devices to hw/sd/, configure with default-configs/
hw: move timer devices to hw/timer/, configure with default-configs/
hw: move ISA bridges and devices to hw/isa/, configure with default-configs/
hw: move char devices to hw/char/, configure via default-configs/
hw: move more files to hw/xen/
hw: move SCSI controllers to hw/scsi/, configure via default-configs/
hw: move SSI controllers to hw/ssi/, configure via default-configs/
hw: move I2C controllers to hw/i2c/, configure via default-configs/
...
Message-id: 1365442249-18259-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Many of these should be cleaned up with proper qdev-/QOM-ification.
Right now there are many catch-all headers in include/hw/ARCH depending
on cpu.h, and this makes it necessary to compile these files per-target.
However, fixing this does not belong in these patches.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Gerd Hoffmann (7) and Hans de Goede (3)
# Via Gerd Hoffmann
* kraxel/usb.79:
usb-tablet: Don't claim wakeup capability for USB-2 version
usb: update docs for bus name change
usb-hub: report status changes only once
usb-hub: limit chain length
xhci: zap unused name field
xhci: remove unimplemented printfs
xhci: remove leftover debug printf
xhci: fix numintrs sanity checks
usb-redir: Add flow control support
usb-redir: Fix crash on migration with no client connected
iPXE vmxnet3 driver makes a few assumptions regarding device operation
that were missed during testing with Linux and Windows drivers.
This patch adds following logic:
1. Additional GET commands processing added
2. Max number of RX chunks should be set to 1 when driver passes 0
via corresponding shared memory field
3. Enforecement for max chunks number added
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/nand.c: Fix nand erase operation
cadence_uart: Flush queued characters on reset
pl330: Don't inhibit ES bits on INTEN
pflash_cfi01: Implement migration support
pflash_cfi01: Drop unused 'bypass' field
hw/arm_gic_common: Use vmstate struct rather than save/load functions
arm_gic: Fix sizes of state fields in preparation for vmstate support
vmstate: Add support for two dimensional arrays
hw/onenand.c: fix migration of dynamically allocated buffer "otp"
hw/sd.c: fix migration of dynamically allocated buffer "buf"
vmstate.h: introduce VMSTATE_BUFFER_POINTER_UNSAFE macro
hw/arm_mptimer: Save the timer state
pl050: Don't send always-constant is_mouse field
hw/arm/nseries: don't print to stdout or stderr
# By Peter Crosthwaite (2) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
xilinx_zynq: Cleanup ssi_create_slave
petalogix_ml605_mmu: Cleanup ssi_create_slave()
target-s390: Fix SRNMT
linux-user: Don't omit comma for strace of rt_sigaction()
test-visitor-serialization: Fix some memory leaks
# By Alex Bligh (2) and Felipe Franciosi (2)
# Via Stefano Stabellini
* sstabellini/xen-2013-04-05:
Allow xen guests to plug disks of 1 TiB or more
Introduce 64 bit integer write interface to xenstore
Xen PV backend: Disable use of O_DIRECT by default as it results in crashes.
Xen PV backend: Move call to bdrv_new from blk_init to blk_connect
usb-storage takes care to fetch the USB serial number from -drive
options, but it neglected to pass its own 'serial' property to the
scsi-disk it creates. With this patch, the 'serial' qdev property and
the 'serial' option in -drive behave the same and correctly apply the
serial number on both USB and SCSI level.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Gerd Hoffmann <kraxel@redhat.com>
Usually, nand erase operation has only 2 or 3 address cycles.
We need to mask s->addr to zero unset stale high-order bytes in the nand address
before using it as the erase address.
This fixes the NAND erase operation in Linux.
[PC: Generalised to work for any number of address cycles rather than just 3]
Signed-off-by: Wendy Liang <jliang@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1364967188-26711-1-git-send-email-peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reset can be used to empty the rx-fifo. As the fifo full condition is
used to return false from can_receive, queued rx data should be flushed
on reset accordingly.
Cc: Wendy Liang <jliang@xilinx.com>
Cc: Jason Wu <huanyu@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reported-by: Jason Wu <huanyu@xilinx.com>
Message-id: 494c1e005e225c915d295ddfd75d992ad2dabc3c.1364964526.git.peter.crosthwaite@xilinx.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This if-else logic inhibits setting of the event status (ES) bits
when interrupts are enabled. This is incorrect. ES should be set
regardless on INTEN state. INTEN only inhibits the signalling of
events to PL330 threads, not setting of the ES register.
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The current xen backend driver implementation uses int64_t variables
to store the size of the corresponding backend disk/file. It also uses
an int64_t variable to store the block size of that image. When writing
the number of sectors (file_size/block_size) to xenstore, however, it
passes these values as 32 bit signed integers. This will cause an
overflow for any disk of 1 TiB or more.
This patch changes the xen backend driver to use a 64 bit integer write
xenstore function.
Signed-off-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
The current implementation of xen_backend only provides 32 bit integer
functions to write to xenstore. This patch adds two functions that
allow writing 64 bit integers (one generic function and another for
the backend only).
This patch also fixes the size of the char arrays used to represent
these integers as strings (originally 32 bytes, however no more than
12 bytes are needed for 32 bit integers and no more than 21 bytes are
needed for 64 bit integers).
Signed-off-by: Felipe Franciosi <felipe@paradoxo.org>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
Due to what is almost certainly a kernel bug, writes with O_DIRECT may
continue to reference the page after the write has been marked as
completed, particularly in the case of TCP retransmit. In other
scenarios, this "merely" risks data corruption on the write, but with
Xen pages from domU are only transiently mapped into dom0's memory,
resulting in kernel panics when they are subsequently accessed.
This brings PV devices in line with emulated devices. Removing
O_DIRECT is safe as barrier operations are now correctly passed
through.
See:
http://lists.xen.org/archives/html/xen-devel/2012-12/msg01154.html
for more details.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
This commit delays the point at which bdrv_new (and hence blk_open
on the underlying device) is called from blk_init to blk_connect.
This ensures that in an inbound live migrate, the block device is
not opened until it has been closed at the other end. This is in
preparation for supporting devices with open/close consistency
without using O_DIRECT. This commit does NOT itself change O_DIRECT
semantics.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefano Stabellini <stefano.stabellini@eu.citrix.com>
For pflash_cfi01 the 'bypass' field is set to zero and never changes,
so remove it (it is a leftover from pflash_cfi02, where bypass is
implemented).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363717469-30980-2-git-send-email-peter.maydell@linaro.org
Update the GIC save/restore to use vmstate rather than hand-rolled
save/load functions.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Message-id: 1363975375-3166-4-git-send-email-peter.maydell@linaro.org
In preparation for switching to vmstate for migration support, fix
the sizes of various GIC state fields. In particular, we replace all
the bitfields (which VMState can't deal with) with straightforward
uint8_t values which we do bit operations on. (The bitfields made
more sense when NCPU was set differently in different situations,
but we now always model at the architectural limit of 8.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363975375-3166-3-git-send-email-peter.maydell@linaro.org
VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1362923278-4080-4-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
VMSTATE_BUFFER_UNSAFE should be used for buffers inlined in device state, not
for buffers allocated dynamically. Change to VMSTATE_BUFFER_POINTER_UNSAFE macro,
which will do migration right.
Signed-off-by: Igor Mitsyanko <i.mitsyanko@gmail.com>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Tested-by: Michael Walle <michael@walle.cc>
Message-id: 1362923278-4080-3-git-send-email-i.mitsyanko@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a missing VMSTATE_TIMER() entry to the arm_mptimer vmstate
description; this omission meant that we would probably hang on reload
when the timer failed to fire.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Message-id: 1363967348-3044-1-git-send-email-peter.maydell@linaro.org
The is_mouse field of the pl050 state structure is constant (it tracks
whether this is a 'pl050_keyboard' or 'pl050_mouse'), so there's
no need to include it in the VMState structure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1363628480-29306-1-git-send-email-peter.maydell@linaro.org
Remove various bits of printing to stdout or stderr from the
nseries code, replacing it with a qemu log message where there's
an appropriate log category, and just dropping the output for
some of the more debug-like printing.
In particular, this will get rid of the 'mipid_reset' message
you currently get from 'make check'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Message-id: 1363368565-24546-1-git-send-email-peter.maydell@linaro.org
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
With the recent m25p80 cleanup there is no need to use
ssi_create_slave_no_init() anymore. Just use ssi_create_slave().
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A common dependency of the constant's current users:
- hw/apic_common.c
- hw/i386/kvmvapic.c
- target-i386/cpu.c
is "target-i386/cpu.h".
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-9-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The new function acpi_table_install() installs any blob the caller passes
in. In the next patches this function will be promoted from helper role to
extern.
Reimplementing the logic should make it easier to understand. It also
removes a buffer overflow when
has_header &&
cumulative_file_size < ACPI_TABLE_HDR_SIZE - ACPI_TABLE_PFX_SIZE
(In that case the g_realloc() call in the read() loop used to shrink the
"acpi_tables" array, causing an out-of-bounds read access when copying the
header out of "acpi_tables".)
The new code isn't more daring alignment-wise than its predecessor:
"acpi_table_header" is packed, and the uint32_t fields are at offsets 6,
26, and 34.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1363821803-3380-7-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
