misa_mxl_max is common for all instances of a RISC-V CPU class so they
are better put into class.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-2-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
It is initialized with a simple assignment and there is little room for
error. In fact, the validation is even more complex.
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Acked-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240203-riscv-v11-1-a23f4848a628@daynix.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vregs[] have variable size that depends on the current vlenb set by the
host, meaning we can't use our regular kvm_riscv_reg_id() to retrieve
it.
Create a generic kvm_encode_reg_size_id() helper to encode any given
size in bytes into a given kvm reg id. kvm_riscv_vector_reg_id() will
use it to encode vlenb into a given vreg ID.
kvm_riscv_(get|set)_vector() can then get/set all 32 vregs.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240123161714.160149-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
KVM will check for the correct 'reg_size' when accessing the vector
registers, erroring with EINVAL if we encode the wrong size in reg ID.
Vector registers varies in size with the vector length in bytes, or
'vlenb'. This means that we need the current 'vlenb' being used by the
host, otherwise we won't be able to fetch all vector regs.
We'll deal with 'vlenb' first. Its support was added in Linux 6.8 as a
get-reg-list register. We'll read 'vlenb' via get-reg-list and mark the
register as 'supported'. All 'vlenb' ops via kvm_arch_get_registers()
and kvm_arch_put_registers() will only be done if the reg is supported,
i.e. we fetched it in get-reg-list during init.
If the user sets a new vlenb value using the 'vlen' property, throw an
error if the user value differs from the host.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240123161714.160149-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The field isn't big enough to hold an uint64_t kvm register and Vector
registers will end up overflowing it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240123161714.160149-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
There is no need to keep both 'vlen' and 'vlenb'. All existing code
that requires 'vlen' is retrieving it via 'vlenb << 3'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-14-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the helper instead of calculating vlmax by hand.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-13-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll re-use the logic froim vext_get_vlmax() in 2 other occurrences in
the next patch, but first we need to make it independent of both 'cpu'
and 'vtype'. To do that, add 'vlenb', 'vsew' and 'lmul' as parameters
instead.
Adapt the two existing callers. In cpu_get_tb_cpu_state(), rename 'sew'
to 'vsew' to be less ambiguous about what we're encoding into *pflags.
In HELPER(vsetvl) the following changes were made:
- add a 'vsew' var to store vsew. Use it in the shift to get 'sew';
- the existing 'lmul' var was renamed to 'vlmul';
- add a new 'lmul' var to store 'lmul' encoded like DisasContext:lmul.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-12-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rename the existing 'sew' variable to 'vsew' for extra clarity.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-11-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Calculate the maximum vector size possible, 'max_sz', which is the size
in bytes 'vlenb' multiplied by the max value of LMUL (LMUL = 8, when
s->lmul = 3).
'max_sz' is then shifted right by 'scale', expressed as '3 - s->lmul',
which is clearer than doing 'scale = lmul - 3' and then using '-scale'
in the shift right.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use the new 'vlenb' CPU config to validate fractional LMUL. The original
comparison is done with 'vlen' and 'sew', both in bits. Adjust the shift
to use vlenb.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use 'cpu->cfg.vlenb' instead of 'cpu->cfg.vlen >> 3'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use s->cfg_ptr->vlenb instead of s->cfg_ptr->vlen / 8.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use s->cfg_ptr->vlenb instead of "s->cfg_ptr->vlen / 8" and
"s->cfg_ptr->vlen >> 3".
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Use ctx->cfg_ptr->vlenb instead of ctx->cfg_ptr->vlen / 8.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
As a bonus, we're being more idiomatic using cpu->cfg.vlenb when
reading CSR_VLENB.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Our usage of 'vlenb' is overwhelming superior than the use of 'vlen'.
We're using 'vlenb' most of the time, having to do 'vlen >> 3' or
'vlen / 8' in every instance.
In hindsight we would be better if the 'vlenb' property was introduced
instead of 'vlen'. That's not what happened, and now we can't easily get
rid of it due to user scripts all around. What we can do, however, is to
change our internal representation to use 'vlenb'.
Add a 'vlenb' field in cpu->cfg. It'll be set via the existing 'vlen'
property, i.e. setting 'vlen' will also set 'vlenb'.
We'll replace all 'vlen >> 3' code to use 'vlenb' directly. Start with
the single instance we have in target/riscv/cpu.c.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240122161107.26737-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The debug Sdtrig extension defines an CSR "mcontext". This commit
implements its predicate and read/write operations into CSR table.
Its value is reset as 0 when the trigger module is reset.
Signed-off-by: Alvin Chang <alvinga@andestech.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20231219123244.290935-1-alvinga@andestech.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep all class properties in riscv_cpu_properties[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep all class properties in riscv_cpu_properties[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Keep all class properties in riscv_cpu_properties[].
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The array is empty and can be removed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
And remove the now unused kvm_cpu_set_cbomz_blksize() setter.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do the same we did with 'cbom_blocksize' in the previous patch.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
After adding a KVM finalize() implementation, turn cbom_blocksize into a
class property. Follow the same design we used with 'vlen' and 'elen'.
The duplicated 'cbom_blocksize' KVM property can be removed from
kvm_riscv_add_cpu_user_properties().
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
To turn cbom_blocksize and cboz_blocksize into class properties we need
KVM specific changes.
KVM is creating its own version of these options with a customized
setter() that prevents users from picking an invalid value during init()
time. This comes at the cost of duplicating each option that KVM
supports. This will keep happening for each new shared option KVM
implements in the future.
We can avoid that by using the same property TCG uses and adding
specific KVM handling during finalize() time, like TCG already does with
riscv_tcg_cpu_finalize_features(). To do that, the common CPU property
offers a way of knowing if an option was user set or not, sparing us
from doing unneeded syscalls.
riscv_kvm_cpu_finalize_features() is then created using the same
KVMScratch CPU we already use during init() time, since finalize() time
is still too early to use the official KVM CPU for it. cbom_blocksize
and cboz_blocksize are then handled during finalize() in the same way
they're handled by their KVM specific setter.
With this change we can proceed with the blocksize changes in the common
code without breaking the KVM driver.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
tested-by tags added, rebased with Alistair's riscv-to-apply.next.
Message-ID: <20240112140201.127083-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Do the same thing we did with 'vlen' in the previous patch with 'elen'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-10-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Turning 'vlen' into a class property will allow its default value to be
overwritten by cpu_init() later on, solving the issue we have now where
CPU specific settings are getting overwritten by the default.
Common validation bits are moved from riscv_cpu_validate_v() to
prop_vlen_set() to be shared with KVM.
And, as done with every option we migrated to riscv_cpu_properties[],
vendor CPUs can't have their 'vlen' value changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-9-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
The same rework did in 'priv_spec' is done for 'vext_spec'. This time is
simpler, since we only accept one value ("v1.0") and we'll always have
env->vext_ver set to VEXT_VERSION_1_00_0, thus we don't need helpers to
convert string to 'vext_ver' back and forth like we needed for
'priv_spec'.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-8-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
'priv_spec' and 'vext_spec' are two string options used as a fancy way
of setting integers in the CPU state (cpu->env.priv_ver and
cpu->env.vext_ver). It requires us to deal with string parsing and to
store them in cpu_cfg.
We must support these string options, but we don't need to store them.
We have a precedence for this kind of arrangement in target/ppc/compat.c,
ppc_compat_prop_get|set, getters and setters used for the
'max-cpu-compat' class property of the pseries ppc64 machine. We'll do
the same with both 'priv_spec' and 'vext_spec'.
For 'priv_spec', the validation from riscv_cpu_validate_priv_spec() will
be done by the prop_priv_spec_set() setter, while also preventing it to
be changed for vendor CPUs. Add two helpers that converts env->priv_ver
back and forth to its string representation. These helpers allow us to
get a string and set 'env->priv_ver' and return a string giving the
current env->priv_ver value. In other words, make the cpu->cfg.priv_spec
string obsolete.
Last but not the least, move the reworked 'priv_spec' option to
riscv_cpu_properties[].
After all said and done, we don't need to store the 'priv_spec' string in
the CPU state, and we're now protecting vendor CPUs from priv_ver
changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,priv_spec="v1.12.0"
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.priv_spec=v1.12.0:
CPU 'sifive-e51' does not allow changing the value of 'priv_spec'
Current 'priv_spec' val: v1.10.0
$
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-7-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Move 'pmp' to riscv_cpu_properties[], creating a new setter() for it
that forbids 'pmp' to be changed in vendor CPUs, like we did with the
'mmu' option.
We'll also have to manually set 'pmp = true' to generic CPUs that were
still relying on the previous default to set it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-6-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Commit 7f0bdfb5bf ("target/riscv/cpu.c: remove cfg setup from
riscv_cpu_init()") already did some of the work by making some
cpu_init() functions to explictly enable their own 'mmu' default.
The generic CPUs didn't get update by that commit, so they are still
relying on the defaults set by the 'mmu' option. But having 'mmu' and
'pmp' being default=true will force CPUs that doesn't implement these
options to set them to 'false' in their cpu_init(), which isn't ideal.
We'll move 'mmu' to riscv_cpu_properties[] without any defaults, i.e.
the default will be 'false'. Compensate it by manually setting 'mmu =
true' to the generic CPUs that requires it.
Implement a setter for it to forbid the 'mmu' setting to be changed for
vendor CPUs. This will allow the option to exist for all CPUs and, at
the same time, protect vendor CPUs from undesired changes:
$ ./build/qemu-system-riscv64 -M virt -cpu sifive-e51,mmu=true
qemu-system-riscv64: can't apply global sifive-e51-riscv-cpu.mmu=true:
CPU 'sifive-e51' does not allow changing the value of 'mmu'
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-5-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Every property in riscv_cpu_options[] will be migrated to
riscv_cpu_properties[]. This will make their default values init
earlier, allowing cpu_init() functions to overwrite them. We'll also
implement common getters and setters that both accelerators will use,
allowing them to share validations that TCG is doing.
At the same time, some options (namely 'vlen', 'elen' and the cache
blocksizes) need a way of tracking if the user set a value for them.
This is benign for TCG since the cost of always validating these values
are small, but for KVM we need syscalls to read the host values to make
the validations, thus knowing whether the user didn't touch the values
makes a difference.
We'll track user setting for these properties using a hash, like we do
in the TCG driver. All riscv cpu options will update this hash in case
the user sets it. The KVM driver will use this hash to minimize the
amount of syscalls done.
For now, both 'pmu-mask' and 'pmu-num' shouldn't be changed for vendor
CPUs. The existing setter for 'pmu-num' is changed to add this
restriction. New getters and setters are required for 'pmu-mask'
While we're at it, add a 'static' modifier to 'prop_pmu_num' since we're
not exporting it.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-4-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
We'll use this function in target/riscv/cpu.c to implement setters that
won't allow vendor CPU options to be changed.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-3-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
user_spec, bext_spec and bext_ver aren't being used.
Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Tested-by: Vladimir Isaev <vladimir.isaev@syntacore.com>
Message-ID: <20240105230546.265053-2-dbarboza@ventanamicro.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the B extension is enabled warn if the user has disabled any of the
required extensions that are part of the 'B' extension. Conversely
enable the extensions that make up the 'B' extension if it is enabled.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-3-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add the infrastructure for the 'B' extension which is the union of the
Zba, Zbb and Zbs instructions.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-ID: <20240111161644.33630-2-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add requirement that 'A' is enabled for all atomic instructions that
lack the check. This makes the 64-bit versions consistent with the
32-bit versions in the same file.
Signed-off-by: Rob Bradford <rbradford@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com>
Message-ID: <20240110163959.31291-1-rbradford@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
/mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
c6RLQQ==
=TMiE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu into staging
tcg: Introduce TCG_COND_TST{EQ,NE}
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
# /mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
# 0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
# 3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
# u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
# 3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
# c6RLQQ==
# =TMiE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Feb 2024 03:19:12 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu: (39 commits)
tcg/tci: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Add TCG_CT_CONST_CMP
tcg/s390x: Split constraint A into J+U
tcg/ppc: Support TCG_COND_TST{EQ,NE}
tcg/ppc: Add TCG_CT_CONST_CMP
tcg/ppc: Tidy up tcg_target_const_match
tcg/ppc: Use cr0 in tcg_to_bc and tcg_to_isel
tcg/ppc: Sink tcg_to_bc usage into tcg_out_bc
tcg/sparc64: Support TCG_COND_TST{EQ,NE}
tcg/sparc64: Pass TCGCond to tcg_out_cmp
tcg/sparc64: Hoist read of tcg_cond_to_rcond
tcg/i386: Use TEST r,r to test 8/16/32 bits
tcg/i386: Improve TSTNE/TESTEQ vs powers of two
tcg/i386: Support TCG_COND_TST{EQ,NE}
tcg/i386: Move tcg_cond_to_jcc[] into tcg_out_cmp
tcg/i386: Pass x86 condition codes to tcg_out_cmov
tcg/arm: Support TCG_COND_TST{EQ,NE}
tcg/arm: Split out tcg_out_cmp()
tcg/aarch64: Generate CBNZ for TSTNE of UINT32_MAX
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Mechanical patch produced running the command documented
in scripts/coccinelle/cpu_env.cocci_template header.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240129164514.73104-25-philmd@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Convert to Binary - counterparts of the already implemented Convert
to Decimal (CVD*) instructions.
Example from the Principles of Operation: 25594C becomes 63FA.
Co-developed-by: Pavel Zbitskiy <pavel.zbitskiy@gmail.com>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-ID: <20240205205830.6425-3-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
CVDG is the same as CVD, except that it converts 64 bits into 128,
rather than 32 into 64. Create a new helper, which uses Int128
wrappers.
Reported-by: Ido Plat <Ido.Plat@ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-ID: <20240205205830.6425-2-iii@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
The character "+" is now forbidden in QOM device names (see commit
b447378e12 - "Limit type names to alphanumerical and some few special
characters"). For the "power5+" and "power7+" CPU names, there is
currently a hack in type_name_is_valid() to still allow them for
compatibility reasons. However, there is a much nicer solution for this:
Simply use aliases! This way we can still support the old names without
the need for the ugly hack in type_name_is_valid().
Message-ID: <20240117141054.73841-2-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Harsh Prateek Bora <harshpb@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Avoid code duplication by handling 7 of the 14 cases
by inverting the test for the other 7 cases.
Use TCG_COND_TSTNE for cc in {1,3}.
Use (cc - 1) <= 1 for cc in {1,2}.
Acked-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These are all test-and-compare type instructions.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
