Wrong braces on the restore of the cached TCGv SV and V bit could lead to
a wrong PSW. While at this it removes unnecessary braces for the restore
of the cached TCGv AV and SAV bits.
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
If the cached bits for C, V, SV, AV, or SAV were set, they would
not be saved during the context save since env->PSW was stored instead
of properly reading them using psw_read().
Reviewed-by: Richard Henderson <rth@twiddle.net>
Signed-off-by: Bastian Koppelmann <kbastian@mail.uni-paderborn.de>
Hopefully final queue before qemu-2.6 soft freeze. Currently
accumulated patches for target-ppc, pseries machine type and related
devices:
* SLOF firmware update
- Many new features, including virtio 1.0 non-legacy support
* H_PAGE_INIT hypercall implementation
* Small cleanups and bugfixes.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=If7v
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-2.6-20160225' into staging
ppc patch queue for 2016-02-25
Hopefully final queue before qemu-2.6 soft freeze. Currently
accumulated patches for target-ppc, pseries machine type and related
devices:
* SLOF firmware update
- Many new features, including virtio 1.0 non-legacy support
* H_PAGE_INIT hypercall implementation
* Small cleanups and bugfixes.
# gpg: Signature made Thu 25 Feb 2016 03:00:56 GMT using RSA key ID 20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>"
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>"
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>"
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-2.6-20160225:
ppc/kvm: Tell the user what might be wrong when using bad CPU types with kvm-hv
ppc/kvm: Use error_report() instead of cpu_abort() for user-triggerable errors
spapr: initialize local Error pointer
hw/ppc/spapr: Implement the h_page_init hypercall
pseries: Update SLOF firmware image to 20160223
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Using a CPU type that does not match the host is not possible when using
the kvm-hv kernel module - the PVR is checked in the kernel function
kvm_arch_vcpu_ioctl_set_sregs_hv() and rejected with -EINVAL if it
does not match the host.
However, when the user tries to specify a non-matching CPU type, QEMU
currently only reports "kvm_init_vcpu failed: Invalid argument", and
this is of course not very helpful for the user to solve the problem.
So this patch adds a more descriptive error message that tells the
user to specify "-cpu host" instead.
Signed-off-by: Thomas Huth <thuth@redhat.com>
[Removed melodramatic '!' :)]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Setting the KVM_CAP_PPC_PAPR capability can fail if either the KVM
kernel module does not support it, or if the specified vCPU type
is not a 64-bit Book3-S CPU type. For example, the user can trigger
it easily with "-M pseries -cpu G2leLS" when using the kvm-pr kernel
module. So the error should not be reported with cpu_abort() since
this function is rather meant for reporting programming errors than
reporting user-triggerable errors (it prints out all CPU registers
and then calls abort() to kills the program - two things that the
normal user does not expect here) . So let's use error_report() with
exit(1) here instead.
A similar problem exists in the code that sets the KVM_CAP_PPC_EPR
capability, so while we're at it, fix that, too.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This fixes a crash in the target QEMU during migration.
Broken in commit c5f54f3.
Signed-off-by: Greg Kurz <gkurz@linux.vnet.ibm.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[reworded commit message]
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
This hypercall either initializes a page with zeros, or copies
another page.
According to LoPAPR, the i-cache of the page should also be
flushed if using H_ICACHE_INVALIDATE or H_ICACHE_SYNCHRONIZE,
and the d-cache should be synchronized to the RAM if the
H_ICACHE_SYNCHRONIZE flag is used. For this, two new functions
are introduced, kvmppc_dcbst_range() and kvmppc_icbi()_range, which
use the corresponding assembler instructions to flush the caches
if running with KVM on Power. If the code runs with TCG instead,
the code only uses tb_flush(), assuming that this will be
enough for synchronization.
Signed-off-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
The main change is virtio 1.0 support.
The complete changelog is:
> dhcp: fix warning messages when calling strtoip()
> virtio-scsi: enable virtio 1.0
> virtio-scsi: use virtio_fill desc api
> virtio-scsi: use idx during initialization
> virtio-net: enable virtio 1.0
> virtio-blk: enable virtio 1.0
> virtio: 1.0 helper to read 16/32/64 bit value
> virtio: add and enable 1.0 device setup
> virtio: 1.0 guest features negotiation
> virtio: update features set/get register accessor
> virtio: make all virtio apis 1.0 aware
> virtio: add 64-bit virtio helpers for 1.0
> virtio: add virtio 1.0 related struct and defines
> virtio: get rid of type variable in virtio_device
> virtio-net: move setup-mac to the open routine
> virtio-net: make net_hdr_size a variable
> virtio-net: replace vq array with vq_{tx,rx}
> virtio-net: use virtio_fill_desc
> virtio-{net,blk,scsi,9p}: use status variable
> virtio-blk: add helpers for filling descriptors
> virtio-{blk,9p}: enable resetting the device
> virtio: introduce helper for initializing virt queue
> virtio: fix code style/design issues.
> fix code style in byteorder.h
> pci: add byte read/write helper routines
> virtio-net: fix gcc warnings (-Wextra)
> virtio-blk: fix gcc warnings (-Wextra)
> readme: Add a note about coding style
> dhcp: Remove duplicated strtoip()
> ethernet: Fix gcc warnings
> net-snk: Fix gcc warnings
> net-snk: Fix coding style
> net-snk: Fix memory leak in dhcp6_process_options()
> net-snk: Fix memory leak in ip6_to_multicast_mac() / send_ipv6()
> net-snk: Remove bad NEIGHBOUR_SOLICITATION code in send_ipv6()
> Fix dma-alloc and dma-map-in functions on board-js2x
> net-snk: Allow stateless autoconfig IPv6 addresses with IP_INIT_IPV6_MANUAL
> net-snk: Simplify the ip6_is_multicast() function
> net-snk: Move global variable definition out of the header file
> net-snk: Prefer non-link-local unicast IPv6 addresses if possible
> net-snk: Fix the check for link-local addresses when receiving RAs
> net-snk: Remove junk at the end of IPv6 TFTP ACK and error packets
> Fix format strings in usb-ohci.c
> net-snk: Get rid of junk at the end of sent DHCPv6 packets
> net-snk: Use transaction IDs in DHCPv4, too
> net-snk: Make use of DHCPv6 transaction IDs
> net-snk: Seed the pseudo-random number generator
> libc: Add srand() call
> libc: Fix the rand() function to return non-zero values
> net-snk: Improve printed text when booting via network
> Increase temporary buffer size of ibm,client-architecture-support call
> Move archsupport.fs into board-qemu directory
> boot: stop booting when we encounter HALT
> fat-files: Fix bug with root-entries = 0 on certain FAT32 file systems
> usb: print unhandled descriptor in debug mode
> Improve stack usage with libnvram get_partition function
> Improve stack usage in libnvram environment variable code
> libc: Port vsnprintf back from skiboot
> Move the code for rfill into a separate function
> Rework wrapper for new_nvram_partition() and fix possible bug in there
> Stack optimization in libusb: split up setup_new_device()
> Check for stack overflow in paflof engine
> Clean up pending packet variable in ipv4 code
> Fix tracking of pending outgoing packets when handling ARP replies
Signed-off-by: Alexey Kardashevskiy <aik@ozlabs.ru>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Commit 757e725b58 added a number of #include "qemu/osdep.h"
files to the tcg-target.c files (as they were named at the time).
These are unnecessary because these files are not standalone C
files, and the tcg/tcg.c file which includes them will have
already included osdep.h on their behalf. Remove the unneeded
include directives.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-4-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Ignore files which have a .inc.c extension -- these are not headers
but they are not standalone C source files either, so we can't make
any automated decisions about what #include directives they should
have.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-3-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Rename the per-architecture tcg-target.c files to tcg-target.inc.c.
This makes it clearer that they are not intended to be standalone
C files, but are instead #included into another source file.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <1456238983-10160-2-git-send-email-peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Create tables for the various global registers that need allocation.
Remove one level of indirection from gregnames and fregnames.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
Since we've not got liveness analysis for indirect bases,
placing them at the end of the call-saved registers makes
it more likely that it'll stay live.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
That is, global_mem registers whose base is another global_mem
register, rather than a fixed register.
Tested-by: Mark Cave-Ayland <mark.cave-ayland@ilande.co.uk>
Signed-off-by: Richard Henderson <rth@twiddle.net>
A previous patch patch changed the type of REG from int
to enum TCGReg, which provokes the following bug in clang:
https://llvm.org/bugs/show_bug.cgi?id=16154
Signed-off-by: Richard Henderson <rth@twiddle.net>
When generating the trace/generated-ust.c source file, make sure
it includes osdep.h as its first include.
This fixes compilation with --enable-trace-backends=ust
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1456240661-15422-1-git-send-email-peter.maydell@linaro.org
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
NB: If this commit breaks compilation for your out-of-tree
patchseries or fork, then you need to make sure you add
#include "qemu/osdep.h" to any new .c files that you have.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
This just catches a couple of stragglers since I posted
the last clean-includes patchset last week.
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
NEED_CPU_H is the define we use to distinguish per-target object
compilation from common object compilation. For the former, we must
also include config-target.h so that the .c files see the necessary
CONFIG_ constants.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a --all option which will run the script on every C
source and header file in the repository (except for those
in a few directories which contain standalone guest code).
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Enhance clean-includes to handle header files as well as .c source
files. For headers we merely remove all the redundant #include
lines, including any includes of qemu/osdep.h itself.
There is a simple mollyguard on the include file processing to
skip a few key headers like osdep.h itself, to avoid producing
bad patches if the script is run on every file in include/.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Rearrange include directives so that we include osdep.h first.
This has to be done manually because clean-includes doesn't
handle C++.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
For C++ before C++11, <stdint.h> requires definition of the macros
__STDC_CONSTANT_MACROS, __STDC_LIMIT_MACROS and __STDC_FORMAT_MACROS
in order to enable definition of various macros by the header file.
Define these in osdep.h, so that we get the right header file
definitions whether osdep.h is being used by plain C, C++11 or
older C++.
In particular libvixl's header files depend on this and won't
compile if osdep.h is included before them otherwise.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Eric Blake <eblake@redhat.com>
Clean up includes so that osdep.h is included first and headers
which it implies are not included manually.
This commit was created with scripts/clean-includes.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Spice hooks the migration status changes to figure out when to
transmit information to the new spice server; but the migration
status in postcopy doesn't quite fit - the destination starts
running before the end of the source migration.
It's not a case of hanging off the migration status change to
postcopy-active either, since that happens before we stop the
guest CPU.
Fix it by sending a notify just after sending the device state,
and adding a flag that can be tested by the notify receiver.
Symptom:
spice handover doesn't work with the error:
red_worker.c:11540:display_channel_wait_for_migrate_data: timeout
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Message-id: 1456161452-25318-1-git-send-email-dgilbert@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Pure debug aid, print a warning in case unblocking
doesn't happen within one second.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
This adds support for dma-buf passing to spice. This makes virtio-gpu
with 3d acceleration work with spice.
Workflow:
* virglrenderer renders the guest command stream into a texture.
* qemu exports the texture as dma-buf and passes on that dma-buf
to spice-server.
* spice-server passes the dma-buf to spice-client, using unix
socket file descriptor passing.
* spice-client asks the window systems composer to render the
dma-buf to the screen.
Requires cutting edge spice (server) and spice-gtk (client) builds,
from git master branch.
Also requires libvirt managing your qemu instance, and using
"virt-viewer --attach $guest". libvirt will connect spice-server and
spice-client using unix sockets instead of tcp sockets then, which
is required for file descriptor passing.
Works for the local case (spice server and client on the same machine)
only. Supporting remote too is planned (by feeding the dma-bufs into
gpu-assisted video encoder), but not there yet.
gl mode is turned off by default, use "-spice gl=on,$otherargs" to
enable it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Spice server will clear the cursor on resize. QXL driver reset it after
resize, however, virtio and other devices do not. Teach qemu to set it
back.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Adds helpers to open a drm render node and create a opengl
context for it. Also add a helper to export a texture as
dma-buf.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Set CONFIG_OPENGL_DMABUF in case both mesa and libepoxy are
new enough to have support for dma-buf import/export.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Without this spice might callback into qemu before ssd->dcl.con is
initialized, resulting in a segfault due to NULL pointer dereference.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Allocate timer once, at init time, instead of allocating/freeing
it all the time when starting/stopping the bus. Simplifies the
code, also fixes bugs (memory leak) due to missing checks whenever
the time is already allocated or not.
Cc: Prasad J Pandit <pjp@fedoraproject.org>
Reported-by: Zuozhi Fzz <zuozhi.fzz@alibaba-inc.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
pid can be gotten from uhci device memory in uhci_handle_td(),
so the guest can trigger assert qemu if we get an invalid pid.
And the uhci spec 2.1.2 tells us The Host Controller sets Host
Controller Process Error bit to 1 when it detects a fatal error
and indicates that the Host Controller suffered a consistency
check failure while processing a Transfer Descriptor. An example
of a consistency check failure would be finding an illegal PID
field while processing the packet header portion of the TD.
When this error occurs, the Host Controller clears the Run/Stop
bit in the Command register to prevent further schedule execution.
We'd better to set UHCI_STS_HCPERR and kick an interrupt, check
the pid value at the first of uhci_handle_td function.
https://bugzilla.redhat.com/show_bug.cgi?id=1070027
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Message-id: 1455867238-4720-1-git-send-email-arei.gonglei@huawei.com
[ applied minor codestyle fix ]
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets,
the USB Net device emulator uses a fixed length(4096) data buffer.
The incoming informationBufferOffset & Length combination could
overflow and cross that range. Check control message buffer
offsets and length to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-3-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets, the USB Net
device emulator uses a fixed length(4096) data buffer. The incoming
packet length could exceed this limit. Add a check to avoid it.
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455648821-17340-2-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
The TUSB6010 is a USB controller (as the name suggests). Move it from
hw/timer (where it was accidentally filed in 2013 when we moved
everything out of hw/) to hw/usb.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1455883404-10976-1-git-send-email-peter.maydell@linaro.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
When processing remote NDIS control message packets, the USB Net
device emulator checks to see if the USB configuration descriptor
object is of RNDIS type(2). But it does not check if it is null,
which leads to a null dereference error. Add check to avoid it.
Reported-by: Qinghao Tang <luodalongde@gmail.com>
Signed-off-by: Prasad J Pandit <pjp@fedoraproject.org>
Message-id: 1455188480-14688-1-git-send-email-ppandit@redhat.com
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)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=1sMO
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches
# gpg: Signature made Mon 22 Feb 2016 15:59:25 GMT using RSA key ID C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>"
* remotes/kevin/tags/for-upstream: (34 commits)
qemu-iotests: 140: make description slightly more verbose
qemu-iotests: 140: don't use IDE device
qemu-iotests: 067: ignore QMP events
blockdev: unset inappropriate flags when changing medium
MAINTAINERS: Add myself as maintainer of the throttling code
docs: Document the throttling infrastructure
qapi: Correct the name of the iops_rd parameter
qemu-iotests: Extend iotest 093 to test bursts
throttle: Test throttle_compute_wait() during bursts
throttle: Check that burst_level leaks correctly
qapi: Add burst length fields to BlockDeviceInfo
qapi: Add burst length parameters to block_set_io_throttle
throttle: Add command-line settings to define the burst periods
throttle: Add support for burst periods
throttle: Use throttle_config_init() to initialize ThrottleConfig
throttle: Merge all functions that check the configuration into one
throttle: Set always an average value when setting a maximum value
throttle: Make throttle_is_valid() set errp
throttle: Make throttle_max_is_missing_limit() set errp
throttle: Make throttle_conflicting() set errp
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJWyy91AAoJEDuxQgLoOKytfvoH/266teXkX9+Ulx3hV4UR/rgC
t1jNcpLqDcTISfW6YcjMMI5jFehTcekpaJvYOTvU6bm3eyPVjQI0JnCMB37WA2ey
kZlqwXx6TYjHbGQBzG9noNjJCSke2Pn7qS/D2sliQOXJasSG2e4WOJ7tql+fSxdV
ivPKVLG+kFyxHFbw1DwJ2njapJd50NkiWftl23+TqP05FExaN0Mt09LlfPmZ7I0f
H1ayqgiRpRuFGOU6Fnn4ho93U+osutyxf2ONVWQT2unY66OEXxYX1C3UJiFyaIIG
PGSj/xCd2Y5KpqrHFsAFIjUrOtEKRLp5SEotx4J4g/SH3GR/4/rQ1R4qZbMXSyg=
=9CzK
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mreitz/tags/pull-block-for-kevin-2016-02-22' into queue-block
Block patches of the last three weeks.
# gpg: Signature made Mon Feb 22 16:55:33 2016 CET using RSA key ID E838ACAD
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>"
* mreitz/tags/pull-block-for-kevin-2016-02-22:
qemu-iotests: 140: make description slightly more verbose
qemu-iotests: 140: don't use IDE device
qemu-iotests: 067: ignore QMP events
blockdev: unset inappropriate flags when changing medium
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Describe in a little more detail what the test is supposed to achieve.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-3-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
IDE is only implemented by very few architectures (mostly PC). The
test doesn't actually need a block device attached to the
BlockBackend, so just drop it and adjust the reference output
accordingly.
Fixes: 16dee418 ("iotests: Add test for eject under NBD server")
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455827853-33477-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
The relative ordering of "device_del" return value and the
"DEVICE_DELETED" QMP event depends on the architecture being
tested. On x86 unplugging virtio disks is asynchronous
(=qdev_unplug()= → =hotplug_handler_unplug_request()=) while on s390x
it is synchronous (=qdev_unplug()= → =hotplug_handler_unplug()=). This
leads to the actual output on s390x consistently differing from the
reference output (that was probably produced on x86).
The easiest way to address this is to filter out QMP events in
067. The DEVICE_DELETED event is already getting explicitly tested by
the Python-based test case 139, so the test coverage should be
unaffected. Make use of the recently introduced _filter_qmp_events()
to remove QMP events from the test case output and adjust the
reference output accordingly.
The tr / sed / tr trick used for filtering was suggested by Max Reitz
<mreitz@redhat.com>.
Signed-off-by: Sascha Silbe <silbe@linux.vnet.ibm.com>
Message-id: 1455886869-139916-2-git-send-email-silbe@linux.vnet.ibm.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Most importantly, this removes BDRV_O_TEMPORARY, to avoid unlink()ing an
image which replaces a snapshotted one.
Signed-off-by: Alyssa Milburn <fuzzie@fuzzie.org>
Message-id: 20160206133618.GA16635@li141-249.members.linode.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
