This removes the dependency of dbus-display on --enable-modules. It also allows
cleanups in modinfo collection and allows moving C++ compiler detection to
meson.build.
Because it is now deprecated to use install_subdir to create an empty directory,
replace it with install_emptydir.
Updating the Meson submodule to 0.61.5 also removes the message
WARNING: Broken python installation detected. Python files installed
by Meson might not be found by python interpreter.
unless using system meson is forced with --meson.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/873
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/848
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Let's use better, more inclusive wording here.
Message-Id: <20220727092135.302915-3-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Let's use a more appropriate wording for this command line and config
file option. The old ones are still accepted for compatibility reasons,
but marked as deprecated now so that it could be removed in a future
version of QEMU.
This change is based on earlier patches from Philippe Mathieu-Daudé,
with the idea for the new option name suggested by BALATON Zoltan.
And while we're at it, replace the "?" in the help text with "help"
since that does not have the problem of conflicting with the wildcard
character of the shells.
Message-Id: <20220727092135.302915-2-thuth@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
In some container environments, there may be references to block devices
witnessable from a container through /proc/self/mountinfo that reference
devices we simply don't have access to in the container, and cannot
provide information about.
Instead of failing the entire fsinfo command, return stub information
for these failed lookups.
This allows test-qga to pass under docker tests, which are in turn used
by the CentOS VM tests.
Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220708153503.18864-2-jsnow@redhat.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
-----BEGIN PGP SIGNATURE-----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=qtih
-----END PGP SIGNATURE-----
Merge tag 'qga-win32-pull-2022-07-13' of github.com:kostyanf14/qemu into staging
qga-win32-pull-2022-07-13
# gpg: Signature made Wed 13 Jul 2022 11:13:32 BST
# gpg: using RSA key C2C2C109EA43C63C1423EB84EF5D5E8161BA84E7
# gpg: Good signature from "Kostiantyn Kostiuk (Upstream PR sign) <kkostiuk@redhat.com>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: C2C2 C109 EA43 C63C 1423 EB84 EF5D 5E81 61BA 84E7
* tag 'qga-win32-pull-2022-07-13' of github.com:kostyanf14/qemu:
qga: add command 'guest-get-cpustats'
qapi: Avoid generating C identifier 'linux'
MAINTAINERS: Add myself as Guest Agent reviewer
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
A vCPU thread always reaches 100% utilization when:
- guest uses idle=poll
- disable HLT vm-exit
- enable MWAIT
Add new guest agent command 'guest-get-cpustats' to get guest CPU
statistics, we can know the guest workload and how busy the CPU is.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220707005602.696557-3-pizhenwei@bytedance.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
The function will return the build root of the parent project if called from a
subproject; that is irrelevant for QEMU's usage but rarely desirable, and
therefore the function was deprecated and replaced by two functions
project_build_root() and global_build_root(). Replace it with the former.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Use more conventional variables to set the location of pre-built
DLL/bin.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-15-marcandre.lureau@redhat.com>
No clear reason to make guesses here.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-13-marcandre.lureau@redhat.com>
No need to setup an environment or to check if the variable is undefined
manually.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-12-marcandre.lureau@redhat.com>
Change build_fs_mount_list() to return bool, in accordance
with the guidance under = Rules = in include/qapi/error.h
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Suggested-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-10-marcandre.lureau@redhat.com>
qemu_open_old() uses qemu_open_internal() which handles special
"/dev/fdset/" path for monitor fd sets, set CLOEXEC, and uses Error
reporting (and some O_DIRECT special error casing).
The monitor fdset handling is unnecessary for qga, use
qga_open_cloexec() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220525144140.591926-9-marcandre.lureau@redhat.com>
Allow for a single point of error reporting, and further refactoring.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-8-marcandre.lureau@redhat.com>
The function takes care of setting CLOEXEC.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-7-marcandre.lureau@redhat.com>
QGA calls qemu_open_old() in various places. Calling qemu_open() instead
isn't a great alternative, as it has special "/dev/fdset" handling and
depends on QEMU internal monitor data structures.
Instead, provide a simple helper for QGA needs, with Error* support. The
following patches will make use of it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-6-marcandre.lureau@redhat.com>
There is a bit too much nesting in the function, this can be simplified
a bit to improve readability.
This also helps with the following error handling changes.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220525144140.591926-5-marcandre.lureau@redhat.com>
Bus type spaces (Indicates a storage spaces bus) is not
supported, so return it as unknown.
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220524154344.869638-2-kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Add a new 'guest-get-diskstats' command for report disk io statistics
for Linux guests. This can be useful for getting io flow or handling
IO fault, no need to enter guests.
Signed-off-by: luzhipeng <luzhipeng@cestc.cn>
Message-Id: <20220520021935.676-1-luzhipeng@cestc.cn>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
=n4lu
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* fix WHPX debugging
* misc qga-vss fixes
* remove the deprecated CPU model 'Icelake-Client'
* support for x86 architectural LBR
* remove deprecated properties
* replace deprecated -soundhw with -audio
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmJ/hZ4UHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroN2Igf/bFs+yluOikt0eFNmXYnshrGBWPXr
# oam0iumPox34vTzZnjpSjF6tJGxHWOgi+wbgIvbwOYHA/ONxx8akW580j+1VhEWa
# X29VyUzjZBffgFtmlF4fM74/ELYm7s4c1a1/D9TpVP6Dr0fSWbMujbx4dfeVstvf
# sONN+A8sVxaNdV9QKPE6BvqfMlPLoCiigrOetf6iY1KuUtkQDF8xDB0MdzdutqAQ
# szAtQ0rrzjxDx9EuGN1SECFM1/riDUbtOOoA9g2C7gGKrx3/iUc6pzrkIcAfWLFK
# xXbH7+6Wynia0cbUxnrvRdY4daMIxm4N3wUvN7szXgF9kxYxeQcsdgGsNA==
# =n4lu
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 14 May 2022 03:34:06 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [undefined]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (23 commits)
configure: remove duplicate help messages
configure: remove another dead variable
build: remove useless dependency
introduce -audio as a replacement for -soundhw
soundhw: move help handling to vl.c
soundhw: unify initialization for ISA and PCI soundhw
soundhw: extract soundhw help to a separate function
soundhw: remove ability to create multiple soundcards
rng: make opened property read-only
crypto: make loaded property read-only
target/i386: Support Arch LBR in CPUID enumeration
target/i386: introduce helper to access supported CPUID
target/i386: Enable Arch LBR migration states in vmstate
target/i386: Add MSR access interface for Arch LBR
target/i386: Add XSAVES support for Arch LBR
target/i386: Enable support for XSAVES based features
target/i386: Add kvm_get_one_msr helper
target/i386: Add lbr-fmt vPMU option to support guest LBR
qdev-properties: Add a new macro with bitmask check for uint64_t property
i386/cpu: Remove the deprecated cpu model 'Icelake-Client'
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
"Since X.Y" is not recognized as a tagged section, and therefore not
formatted as such in generated documentation. Fix by adding the
required colon.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20220422132807.1704411-1-armbru@redhat.com>
Reviewed-by: Andrea Bolognani <abologna@redhat.com>
volume_name_wchar is allocated by 'void* operator new [](long long unsigned int)
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220512154909.331481-1-kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220512154906.331399-1-kkostiuk@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After assigning a NVMe/SCSI controller to guest by VFIO, we lose
everything on the host side. A guest uses these devices exclusively,
we usually don't care the actions on these devices. But there is a
low probability that hitting physical hardware warning, we need a
chance to get the basic smart log info.
Introduce disk smart, and implement NVMe smart on linux.
Thanks to Keith and Marc-André.
CC: Keith Busch <kbusch@kernel.org>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-3-pizhenwei@bytedance.com>
Assigning a NVMe disk by VFIO or emulating a NVMe controller by QEMU,
a NVMe disk get exposed in guest side. Support NVMe disk bus type and
implement posix version.
Test PCI passthrough case:
~#virsh qemu-agent-command buster '{"execute":"guest-get-disks"}' | jq
...
{
"name": "/dev/nvme0n1",
"dependencies": [],
"partition": false,
"address": {
"serial": "SAMSUNG MZQL23T8HCLS-00A07_S64HNE0N500076",
"bus-type": "nvme",
"bus": 0,
"unit": 0,
"pci-controller": {
"bus": 0,
"slot": 22,
"domain": 0,
"function": 0
},
"dev": "/dev/nvme0n1",
"target": 0
}
...
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Message-Id: <20220420022610.418052-2-pizhenwei@bytedance.com>
On Solaris, instead of the -P, -H, and -r flags, we need to provide
the target init state to the 'shutdown' command: state 5 is poweroff,
0 is halt, and 6 is reboot. We also need to pass -g0 to avoid the
default 60-second delay, and -y to avoid a confirmation prompt.
Implement this logic under an #ifdef CONFIG_SOLARIS, so the
'guest-shutdown' command works properly on Solaris.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-6-adeason@sinenomine.net>
guest_get_network_stats can silently fail in a couple of ways. Add
debug messages to these cases, so we're never completely silent on
failure.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220426195526.7699-5-adeason@sinenomine.net>
The code for guest-network-get-interfaces needs a couple of small
adjustments for Solaris:
- The results from SIOCGIFHWADDR are documented as being in ifr_addr,
not ifr_hwaddr (ifr_hwaddr doesn't exist on Solaris).
- The implementation of guest_get_network_stats is Linux-specific, so
hide it under #ifdef CONFIG_LINUX. On non-Linux, we just won't
provide network interface stats.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-4-adeason@sinenomine.net>
Since its introduction in commit 3424fc9f16 ("qemu-ga: add
guest-network-get-interfaces command"), guest-network-get-interfaces
seems to check if a given interface has a hardware address by checking
'ifa->ifa_flags & SIOCGIFHWADDR'. But ifa_flags is a field for IFF_*
flags (IFF_UP, IFF_LOOPBACK, etc), and comparing it to an ioctl like
SIOCGIFHWADDR doesn't make sense.
On Linux, this isn't a big deal, since SIOCGIFHWADDR has so many bits
set (0x8927), 'ifa->ifa_flags & SIOCGIFHWADDR' will usually have a
nonzero result for any 'normal'-looking interfaces: anything with
IFF_UP (0x1) or IFF_BROADCAST (0x2) set, as well as several
less-common flags. This means we'll try to get the hardware address
for most/all interfaces, even those that don't really have one (like
the loopback device). For those interfaces, Linux just returns a
hardware address of all zeroes.
On Solaris, however, trying to get the hardware address for a loopback
device returns an EADDRNOTAVAIL error. This causes us to return an
error and the entire guest-network-get-interfaces call fails.
Change this logic to always try to get the hardware address for each
interface, and don't return an error if we fail to get it. Instead,
just don't include the 'hardware-address' field in the result if we
can't get the hardware address.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-3-adeason@sinenomine.net>
Currently, commands-posix.c assumes that getifaddrs() is only
available on Linux, and so the related guest agent command
guest-network-get-interfaces is only implemented for #ifdef __linux__.
This function does exist on other platforms, though, such as Solaris.
So, add a meson check for getifaddrs(), and move the code for
guest-network-get-interfaces to be built whenever getifaddrs() is
available.
The implementation for guest-network-get-interfaces still has some
Linux-specific code, which is not fixed in this commit. This commit
moves the relevant big chunks of code around without changing them, so
a future commit can change the code in place.
Signed-off-by: Andrew Deason <adeason@sinenomine.net>
Reviewed-by: Michal Privoznik <mprivozn@redhat.com>
Message-Id: <20220426195526.7699-2-adeason@sinenomine.net>
The qemu_*block() functions are meant to be be used with sockets (the
win32 implementation expects SOCKET)
Over time, those functions where used with Win32 SOCKET or
file-descriptors interchangeably. But for portability, they must only be
used with socket-like file-descriptors. FDs can use
g_unix_set_fd_nonblocking() instead.
Rename the functions with "socket" in the name to prevent bad usages.
This is effectively reverting commit f9e8cacc55 ("oslib-posix:
rename socket_set_nonblock() to qemu_set_nonblock()").
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
The call is POSIX-specific. Use the dedicated GLib API.
(this is a preliminary patch before renaming qemu_set_nonblock())
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
The .wxs file uses $(var.Mingw_bin) while configure/meson have always
used Mingw_dlls. Fix them to match what was probably intended.
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The old code is kind of wrong. Say it's 1649309843.000001 seconds past
the epoch. Prints "1649309843.1". 9us later, it prints "1649309843.10".
Should really use %06lu for the microseconds part.
Use GDateTime instead, as suggested by Daniel.
Suggested-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Since the introduction of guest-exec in/out/err redirections in commit
a1853dca74 ("qga: guest-exec simple stdin/stdout/stderr redirection"),
some execution state variables are handled with atomic ops. However,
there are no threads involved in this code (and glib sources are
dispatched in the same thread), and no other obvious reason to use them.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-40-marcandre.lureau@redhat.com>
Simplify the function to only return the directory path. Callers are
adjusted to use the GLib function to build paths, g_build_filename().
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-39-marcandre.lureau@redhat.com>
The function is specific to qemu-ga, no need to share it in QEMU.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220420132624.2439741-32-marcandre.lureau@redhat.com>
The latter simply requires glib.h, while the former is not in the
Windows API (but provided by mingw header & CRT)
Also simplify the expression for 1/10s.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20220420132624.2439741-12-marcandre.lureau@redhat.com>
The header has been part of MinGW-w64 since the introduction of the
project (2007). While on MinGW(32), the legacy project, it was imported
in 2014 from w32api-3.17 (commit e4803e0da2).
According to build-platform.rst and our CI coverage, we only support
building with MinGW-w64 (from Debian/Fedora).
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <20220401085106.2167374-1-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Environment is implicitly inherited from the current process "environ"
variable for execl() or g_spawn_sync(), no need to be explicit about it.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220323155743.1585078-31-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
According to GLib API:
g_get_current_time has been deprecated since version 2.62 and should not
be used in newly-written code. GTimeVal is not year-2038-safe. Use
g_get_real_time() instead.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Message-Id: <20220323155743.1585078-13-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
GLib g_get_real_time() is an alternative to gettimeofday() which allows
to simplify our code.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-Id: <20220307070401.171986-4-marcandre.lureau@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This fixes:
qga/vss-win32/install.cpp:49:24: error: cannot initialize a variable of
type 'char *' with an rvalue of type 'const char *'
char *msg = NULL, *nul = strchr(text, '(');
^ ~~~~~~~~~~~~~~~~~
Signed-off-by: Helge Konetzka <hk@zapateado.de>
Reviewed-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Message-Id: <39400817-3dc9-516d-9096-bc1f68862531@zapateado.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
