This avoids each test needing to add it to suppress windows popping up.
[Commit 7ceeedd016 ("blockdev-test: add
test case for drive_add duplicate IDs") and commit
43cd209803 ("qdev-monitor-test: add
device_add leak test cases") added qtest tests without specifying
-display none.
As a result, "make check" now tries to use graphics (GTK or SDL). Since
graphics are not used by the test and inappropriate for headless "make
check" runs, add the missing -display none.
This fixes "make check" in the QEMU buildbot.
-- Stefan]
Signed-off-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
If an explicit driver option is present, but doesn't specify a valid
driver, then bdrv_open() should fail instead of probing the format.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch moves ret assignment after reporting original error.
We were lucky to pass qemu-iotests 048 (qemu-img compare case) but when
I tried to run with TEST_DIR=/tmp (tmpfs), it fails with a "wrong"
mismatch offset. This fixes two bugs.
In the first if branch, setting ret to 1 before using it makes dead code
in the next line: pnum is never added to mismatch offset even if ret was
0.
In the other if branch, currently the output error is always -4:
strerror(-4) -> Unknown error -4
Added regression test in case 048.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Amos Kong <akong@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Add a new test case in file 041 for mirroring unbacked images in
"absolute-paths" mode. This should work, if possible, but most
importantly, qemu should never crash.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
If backing file doesn't exist, the error message is confusing and
misleading:
$ qemu /tmp/a.qcow2
qemu: could not open disk image /tmp/a.qcow2: Could not open file: No
such file or directory
But...
$ ls /tmp/a.qcow2
/tmp/a.qcow2
$ qemu-img info /tmp/a.qcow2
image: /tmp/a.qcow2
file format: qcow2
virtual size: 8.0G (8589934592 bytes)
disk size: 196K
cluster_size: 65536
backing file: /tmp/b.qcow2
Because...
$ ls /tmp/b.qcow2
ls: cannot access /tmp/b.qcow2: No such file or directory
This is not intuitive. It's better to have the missing file's name in
the error message. With this patch:
$ qemu-io -c 'read 0 512' /tmp/a.qcow2
qemu-io: can't open device /tmp/a.qcow2: Could not open backing
file: Could not open '/stor/vm/arch.raw': No such file or directory
no file open, try 'help open'
Which is a little bit better.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This tests the replay of a data sector in a VHDX image file.
The image file is a 10G dynamic image, with 4MB block size. The
image was created with qemu-img, and the log left unplayed by
modification of the vhdx image format driver.
It was verified under both QEMU and Hyper-V that the image file,
post log replay, matched.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This removes the IMGFMT_GENERIC blocker for read-only, so existing
iotests run read/write tests for vhdx images created by qemu-img (e.g.
tests 001, 002, 003).
In addition, this updates the sample image test for the Hyper-V
created image, to verify we can write it as well.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The non-global option output is suppresed in _make_test_img() for
output verification in the 0?? tests. This adds suppression for
the vhdx-unique options as well. This allows check -vhdx to run
successfully.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Ensure that the device_add error code path deletes device objects.
Failure to do so not only leaks the objects but can also keep other
objects (like drive or netdev) alive due to qdev properties holding
references.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The following should work:
(qemu) drive_add if=none,id=drive0
(qemu) drive_del drive0
(qemu) drive_add if=none,id=drive0
Previous versions of QEMU produced a duplicate ID error because
drive_add leaked the options.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Add a qtest qmp() function that returns the response object. This
allows test cases to verify the result or to check for error responses.
It also allows waiting for QMP events.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Existing qmp() callers do not expect a response object. In order to
implement real QMP test cases it will be necessary to inspect the
response object.
Rename qmp() to qmp_discard_response(). Later patches will introduce a
qmp() function that returns the response object and tests that use it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
When creating images with backing files in the test, the backing
file argument was not quoted properly. This caused the test to fail
when run from a pathname with a space. Pass the backing argument in
with the -b option to _make_test_img, so it can be properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still a couple of instances of unquoted usage of
$TEST_IMG and $TEST_IMG.orig. Quoted these so they will not fail
on pathnames with spaces in them.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 039 had $TEST_IMG with duplicate double quotes - remove duplicate.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
There were still instances of $TEST_IMG not being properly quoted.
This was in the usage of a string built up for a 'for' loop; modify
the loop so we can quote $TEST_IMG properly.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
$TEST_IMG.base is used unquoted. Add quotes so that pathnames with
spaces are supported.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
_make_test_img() currently works with spaced pathnames only when not
specifying a backing file. This fixes it so that the backing file
argument is properly quoted.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The usage of $TEST_IMG was not properly quoted everywhere in
common.pattern.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The actual size of the image file may differ depending on the Linux
kernel currently running on the host. Filtering out this value makes
this test pass in such cases.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Benoit Canet <benoit@irqsave.net>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
On 32-bit hosts:
CC tests/test-opts-visitor.o
tests/test-opts-visitor.c: In function 'test_value':
tests/test-opts-visitor.c:128: warning: integer constant is too large for 'long' type
CC tests/test-bitops.o
tests/test-bitops.c:34: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
tests/test-bitops.c:35: warning: integer constant is too large for 'long' type
CC tests/endianness-test.o
tests/endianness-test.c:47: warning: integer constant is too large for 'long' type
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1383669768-23926-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
Instantiate all [*] machines per target, so that they get a bit of test
coverage at all. This has proven helpful during QOM refactorings.
[*] ppcemb target contains some non-working non-embedded machines, and
ppc405 CPUs are not available there either.
i386 and x86_64 do not cover pc*-x.y or xenfv.
Signed-off-by: Andreas Färber <afaerber@suse.de>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.14 (GNU/Linux)
iQIcBAABAgAGBQJScnrnAAoJEH8JsnLIjy/WhhsP/2No1yEGNzfhw0WLDsEGBJI7
zjG+QkRMO4q2t256SxNr84KBFJlYKBvGrx+W8xC66AdvR1feL5hmWdXAMTJovx6Z
3Qt59RI9iISZ2OEtc9FhdsC+dSdM/3qie17XuuSCqifsi4xLjIZK/s18+RnLa0t/
nRObYP4prRl0c3o1gKaUvNz2wkIqctQAIe8UQkn6R1vPC6D60m/H9dDj4Kj68HO0
ICsF4AXBR/V2a8gU36/PGexBVyfgC4HOeuN0qNSTgYOKxLuNR+SrlzzhHE+jZTs5
GASm3vg/vUgBOO1759X5T8hveO6yu8XL82l+/d5nIK4gYGORIQZT74dyV5JgQIlF
Y47d0cF28+C/fuL1jh7c+2HY5WmmJQosMi9CaCBj0lvH0k5caEjqwPeHtRBmEyu3
1wAcLQJowZrWB5ez9MjezsaL4sPCymvB/4F443xdz5V19mE41bLZGW2EIT7MXHY7
IcwLU/opx76GMOFfWVMA7jeQkjiPaqGeaQHJzdnGUzIthqyiTigQMfi5P3nXGDic
uQi+KrqP9lNpJlZk4xGQnFovHNmKZrnLhUvqOIPk7/wKMvlU6ewdzp5Fnwzqw4MW
uJ/6eBJYolMyY+q37AH3Q6ZUkwTJi9O1drCPA0Ogr/dJiCyAiOoKuL0N74VabpcD
AahXw+yYV0qh6H4YjOzW
=wGCx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'kwolf/tags/for-anthony' into staging
Block patches for 1.7.0-rc0 (v2)
# gpg: Signature made Thu 31 Oct 2013 04:44:39 PM CET using RSA key ID C88F2FD6
# gpg: Can't check signature: public key not found
* kwolf/tags/for-anthony: (30 commits)
vmdk: Implment bdrv_get_specific_info
qapi: Add optional field 'compressed' to ImageInfo
qemu-iotests: prefill some data to test image
sheepdog: check simultaneous create in resend_aioreq
sheepdog: cancel aio requests if possible
sheepdog: make add_aio_request and send_aioreq void functions
sheepdog: try to reconnect to sheepdog after network error
coroutine: add co_aio_sleep_ns() to allow sleep in block drivers
sheepdog: reload inode outside of resend_aioreq
sheepdog: handle vdi objects in resend_aio_req
sheepdog: check return values of qemu_co_recv/send correctly
qemu-iotests: Test case for backing file deletion
qemu-iotests: drop duplicated "create_image"
qemu-iotests: Fix 051 reference output
block: Avoid unecessary drv->bdrv_getlength() calls
block: Disable BDRV_O_COPY_ON_READ for the backing file
ahci: fix win7 hang on boot
sheepdog: pass copy_policy in the request
sheepdog: explicitly set copies as type uint8_t
block: Don't copy backing file name on error
...
Message-id: 1383064269-27720-1-git-send-email-kwolf@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Implement .bdrv_get_specific_info to return the extent information.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Case 030 occasionally fails because of block job compltes too fast to be
captured by script, and 'unexpected qmp event' of job completion causes
the test failure.
Simply fill in some data to the test image to make this false alarm less
likely to happen.
(For other benefits to prefill data to test image, see also commit
ab68cdfaa).
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test case for trying to open an image file where it is impossible
to open its backing file (in this case, because it was deleted). When
doing this, qemu (or qemu-io in this case) should not crash but rather
print an appropriate error message.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds a test case for Multiboot memory map in the tests/multiboot
directory, where future i386 test kernels can be dropped. Because this
requires an x86 build host and an installed 32 bit libgcc, the test is
not part of a regular 'make check'.
The reference output for the test is verified against test runs of the
same multiboot kernel booted by some GRUB 0.97.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
compatiblity -> compatibility
continously -> continuously
existance -> existence
usefull -> useful
shoudl -> should
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a test for saving a VM state from a qcow2 image and loading it back
(with having restarted qemu in between); this should work without any
problems.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Extend 060 by a test which creates a corrupted image with an active L2
entry pointing to an inactive L2 table and writes to the corresponding
guest offset.
Also, use overlap-check=all for all tests in 060.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Block devices creates with -drive and drive_add should automatically
disappear if the guest device is unplugged. blockdev-add ones shouldn't.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
IF_NONE allows read-only, which makes forbidding it in this place
for other types pretty much pointless.
Instead, make sure that all devices for which the check would have
errored out check in their init function that they don't get a read-only
BlockDriverState. This catches even cases where IF_NONE and -device is
used.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Convert "fprintf(stderr,..." and standardize error messages:
Remove a few local_error's and use errp.
Remove "VMDK:" or "Vmdk:" prefixes in error message and fix to upper
case.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This command will package the clean operations in tests. Now root Makefile
simply calls the command and do not care the details of it any more. Original
the built binaries for test will not be removed, now they will be deleted
in clean operation.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Usually we may configure and make, then goto ./tests/qemu-iotest,
check. In this case an error will happen since helper program
was not built. This patch simply build it by default. A better way
may be introducing Makefile in ./tests/qemu-iotest, but it is more
complicate to handle out of tree case, and a bit overkill
for a single file now, we can do that when more files come.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Make use of the error parameter in the opening and creating functions in
block/raw-posix.c.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Move the blank line to above the test step banner, so it looks clearer
in blocks.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This adds the VHDX format to the qemu-iotests format, and adds
a read test. The test reads from an existing sample image, that
was created with Hyper-V under Windwos Server 2012.
The image file is a 1GB dynamic image, with 32MB blocks.
The pattern 0xa5 exists from 0MB-33MB (past a block size boundary)
The pattern 0x96 exists from 33MB-66MB (past another block boundary,
and leaving a partial blank block)
From 66MB-1024MB, all reads should return 0.
Although 1GB dynamic image with 66MB of data, the bzip2'ed image
file size is only 874 bytes.
This also adds in the IMGFMT_GENERIC flag, so r/o images can be
tested (e.g. ./check -vhdx) without failing tests that assume
r/w support.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a new test case for discarding preallocated zero clusters; doing
this should not result in any leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a test for the additional information now provided by qemu-img info
when used on qcow2 images. It also tests the qemu QMP output from the
query-block command when running qemu with different runtime options
than specified in the image (ImageInfoSpecific should always refer to
the image).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In _img_info, filter out additional information specific to the image
format provided by qemu-img info, since tests designed for multiple
image formats would produce different outputs for every image format
otherwise.
In a human-readable dump, that new information will always be last for
each "image information block" (multiple blocks are emitted when
inspecting the backing file chain). Every block is separated by an empty
line. Therefore, in this case, everything starting with the line "Format
specific information:" up to that empty line (or EOF, if it is the last
block) has to be stripped.
The JSON dump will always emit pretty JSON data. Therefore, the opening
and closing braces of every object will be on lines which are indented
by exactly the same amount, and all lines in between will have more
indentation. Thus, in this case, everything starting with a line
matching the regular expression /^ *"format-specific": {/ until /^ *},?/
has to be stripped, where the number of spaces at the beginning of the
respective lines is equal.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Max Reitz (5) and others
# Via Stefan Hajnoczi
* stefanha/block:
block: use correct filename
qemu-iotests: Correct 026 output
qcow2: Free allocated L2 cluster on error
qcow2: Switch L1 table in a single sequence
block: vhdx - add migration blocker
block: use correct filename for error report
qcow2: CHECK_OFLAG_COPIED is obsolete
qcow2: Correct endianness in overlap check
Message-id: 1381145289-6591-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Because l2_allocate now frees the unused L2 cluster on error, the
according test cases in 026 don't result in one leaked cluster anymore.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Commit 4f193e3 added the test, but screwed up in-tree builds
(SRCDIR=.): the tests's output overwrites the expected output, and is
thus compared to itself.
Cc: qemu-stable@nongnu.org
Reported-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Forgotten in commit 6046c62 and 3464700.
Cc: qemu-stable@nongnu.org
Reviewed-by: Andreas Färber <afaerber@suse.de>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Add a test case for zero cluster expansion on an image completely filled
with preallocated zero clusters to test 061.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
A lot of image filename and paths are used unquoted. Quote these to
make sure that directories / filenames with spaces are not problematic.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
For image formats that are not "QEMU native", but supported for
compatibility, it is useful to verify that an image created with
the 'gold standard' native tool can be read / written to successfully
by QEMU.
In addition to testing non-native images, this could also be useful to
test against image files created by older versions of QEMU.
This provides a directory to store small sample images, for use by
scripts in tests/qemu-iotests.
Image files should be compressed with bzip2.
To use a sample image from a bash script, the _use_sample_img function
will copy and decompress the image into $TEST_DIR, and set $TEST_IMG to
be the decompressed sample image copy. To cleanup, call
_cleanup_test_img as normal.
Signed-off-by: Jeff Cody <jcody@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QMP/qmp.py is renamed to scripts/qmp/qmp.py, fix the search path in iotests.py.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Since commit "block: Error parameter for open functions", error output
is more verbose. Update test case output file to follow the change.
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test 052 uses qemu-io -s which will result in bdrv_open trying to create
a temporary snapshot file in /tmp. However, since O_DIRECT and tmpfs
do not work well together, disable this test for -nocache.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Test that backing.file.filename option can be parsed and override the
backing file from image (backing file reflected with "info block").
Signed-off-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Stefan Hajnoczi (4) and others
# Via Stefan Hajnoczi
* stefanha/block:
virtio-blk: do not relay a previous driver's WCE configuration to the current
blockdev: do not default cache.no-flush to true
block: don't lose data from last incomplete sector
qcow2: Correct snapshots size for overlap check
coroutine: fix /perf/nesting coroutine benchmark
coroutine: add qemu_coroutine_yield benchmark
qemu-timer: do not take the lock in timer_pending
qemu-timer: make qemu_timer_mod_ns() and qemu_timer_del() thread-safe
qemu-timer: drop outdated signal safety comments
osdep: warn if open(O_DIRECT) on fails with EINVAL
libcacard: link against qemu-error.o for error_report()
Message-id: 1379698931-946-1-git-send-email-stefanha@redhat.com
The /perf/nesting benchmark is broken because the counters are
not reset after each iteration. Therefore, nesting is done only
on the first iteration, and skipped on every other.
This patch fixes the issue, and reduces the number of iterations
to make it possible to run the benchmark in a reasonable amount of
time.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Current coroutine performance benchmarks test only coroutine creation,
either directly or in a nested way. This patch adds a benchmark to
evaluate the performance of qemu_coroutine_yield.
Signed-off-by: Gabriel Kerneis <gabriel@kerneis.info>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Test 038 uses asynchronous I/O, resulting (potentially) in a different
output for every run (regarding the order of the I/O accesses). This can
be fixed by simply sorting the I/O access messages, since their order is
irrelevant anyway (for this asynchonous I/O).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
qemu-iotests number 007 doesn't do test image cleanup. This will affect
those protocols that expect a clean state before every test. Hence
ensure that test image is cleaned up in this test.
Signed-off-by: Bharata B Rao <bharata@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
When opening/creating images, propagating errors instead of immediately
emitting them on occurrence results in errors generally being printed on
a single line rather than being split up into multiple ones. This in
turn requires adjustments to some test results.
Also, test 060 used a sed to filter out the test image directory and
format by removing everything from the affected line after a certain
keyword; this now also removes the error message itself, which can be
fixed by using _filter_testdir and _filter_imgfmt.
Finally, _make_test_img in common.rc did not filter out the test image
directory etc. from stderr. This has been fixed through a redirection of
stderr to stdout (which is already done in _check_test_img and
_img_info).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Create in transaction and deletion in single command will be tested.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add one test case for zero cluster expansion on qcow2 version downgrade
in shared L2 tables (i.e., L2 tables with a refcount > 1) and one for
zero expansion on backed clusters in shared L2 tables.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This case will test whether the monitor can receive fd at runtime.
To verify better, additional monitor is created to see if qemu
can handler two monitor instances correctly.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This patch make use of the compiled scm helper program to transfer
fd via unix socket at runtime.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This program can do a sendmsg call to transfer fd with unix
socket, which is not supported in python2.
The built binary will not be deleted in clean, but it is a
existing issue in ./tests, which should be solved in another
patch.
Signed-off-by: Wenchao Xia <xiawenc@linux.vnet.ibm.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The reference output for test case 026 hasn't been updated in a long
time and it's one of the "known failing" cases. This patch updates the
reference output so that unintentional changes can be reliably detected
again.
The problem with this test case is that it produces different output
depending on whether -nocache is used or not. The solution of this patch
is to actually have two different reference outputs. If nnn.out.nocache
exists, it is used as the reference output for -nocache; otherwise,
nnn.out stays valid for both cases.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
These scripts used to have a four characters indentation, with eight
consecutive spaces converted into a tab. Convert everything into spaces.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
tests/test-aio.c used pipe2 which is Linux only. Use qemu_pipe
and qemu_set_nonblock for portabillity. Addition of O_CLOEXEC
is a harmless bonus.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a -n option to skip volume creation on qemu-img convert.
This is useful for targets such as rbd / ceph, where the
target volume may already exist; we cannot always rely on
qemu-img convert to create the image, as dependent on the
output format, there may be parameters which are not possible
to specify through the qemu-img convert command line.
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Alexandre Derumier <aderumier@odiso.com>
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The moved OFLAG_COPIED check in qcow2_check_refcounts results in a
different output from test 039 (mismatches are now found after the
general refcount check (as far as any remain)). This patch adjusts the
expected test result accordingly.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
A new test on corrupted images with overlapping cluster allocations.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
sleep() apparently doesn't exist under mingw. Use g_usleep for
portability.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This adds an incompatible bit indicating corruption to qcow2. Any image
with this bit set may not be written to unless for repairing (and
subsequently clearing the bit if the repair has been successful).
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
This test creates an image with unallocated zero clusters, then creates
a snapshot. Afterwards, there should be neither any errors nor leaks.
Signed-off-by: Max Reitz <mreitz@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Remove dummy_io_handler_flush from tests/test-aio.c as it does
nothing now.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a test harness for AioContext timers. The g_source equivalent is
unsatisfactory as it suffers from false wakeups.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a QEMUTimerListGroup each AioContext (meaning a QEMUTimerList
associated with each clock is added) and delete it when the
AioContext is freed.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
According to commit 4f193e34
("tests: Use qapi-schema-test.json as schema parser test")
the "tests/qapi-schema/qapi-schema-test.out" file must be updated as well.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Tested-by: Wanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
# By Stefan Hajnoczi
# Via Stefan Hajnoczi
* stefanha/block-next:
aio: drop io_flush argument
tests: drop event_active_cb()
thread-pool: drop thread_pool_active()
dataplane/virtio-blk: drop flush_true() and flush_io()
block/ssh: drop return_true()
block/sheepdog: drop have_co_req() and aio_flush_request()
block/rbd: drop qemu_rbd_aio_flush_cb()
block/nbd: drop nbd_have_request()
block/linux-aio: drop qemu_laio_completion_cb()
block/iscsi: drop iscsi_process_flush()
block/gluster: drop qemu_gluster_aio_flush_cb()
block/curl: drop curl_aio_flush()
aio: stop using .io_flush()
tests: adjust test-thread-pool to new aio_poll() semantics
tests: adjust test-aio to new aio_poll() semantics
dataplane/virtio-blk: check exit conditions before aio_poll()
block: stop relying on io_flush() in bdrv_drain_all()
block: ensure bdrv_drain_all() works during bdrv_delete()
Message-id: 1376921877-9576-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
The .io_flush() handler no longer exists and has no users. Drop the
io_flush argument to aio_set_fd_handler() and related functions.
The AioFlushEventNotifierHandler and AioFlushHandler typedefs are no
longer used and are dropped too.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Drop the io_flush argument to aio_set_event_notifier().
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Now that aio_poll() users check their termination condition themselves,
it is no longer necessary to call .io_flush() handlers.
The behavior of aio_poll() changes as follows:
1. .io_flush() is no longer invoked and file descriptors are *always*
monitored. Previously returning 0 from .io_flush() would skip this file
descriptor.
Due to this change it is essential to check that requests are pending
before calling qemu_aio_wait(). Failure to do so means we block, for
example, waiting for an idle iSCSI socket to become readable when there
are no requests. Currently all qemu_aio_wait()/aio_poll() callers check
before calling.
2. aio_poll() now returns true if progress was made (BH or fd handlers
executed) and false otherwise. Previously it would return true whenever
'busy', which means that .io_flush() returned true. The 'busy' concept
no longer exists so just progress is returned.
Due to this change we need to update tests/test-aio.c which asserts
aio_poll() return values. Note that QEMU doesn't actually rely on these
return values so only tests/test-aio.c cares.
Note that ctx->notifier, the EventNotifier fd used for aio_notify(), is
now handled as a special case. This is a little ugly but maintains
aio_poll() semantics, i.e. aio_notify() does not count as 'progress' and
aio_poll() avoids blocking when the user has not set any fd handlers yet.
Patches after this remove .io_flush() handler code until we can finally
drop the io_flush arguments to aio_set_fd_handler() and friends.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block when fd handlers have been set.
Previously aio_poll() would return early if all .io_flush() returned
false. This means we need to check the equivalent of the .io_flush()
condition *before* calling aio_poll(ctx, true) to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
aio_poll(ctx, true) will soon block if any fd handlers have been set.
Previously it would only block when .io_flush() returned true.
This means that callers must check their wait condition *before*
aio_poll() to avoid deadlock.
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This way, properties registered in the instance_init function of
child classes will be handled properly by qdev_prop_set_globals(), too.
Includes a unit test for the new functionality.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
This tests the qdev global-properties handling code.
Signed-off-by: Eduardo Habkost <ehabkost@redhat.com>
Signed-off-by: Andreas Färber <afaerber@suse.de>
