Now that run_poll_handlers_once() is only called by run_poll_handlers()
we can improve the CPU time profile by moving the expensive
RCU_READ_LOCK() out of the polling loop.
This reduces the run_poll_handlers() from 40% CPU to 10% CPU in perf's
sampling profiler output.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-3-stefanha@redhat.com
Message-Id: <20200305170806.1313245-3-stefanha@redhat.com>
One iteration of polling is always performed even when polling is
disabled. This is done because:
1. Userspace polling is cheaper than making a syscall. We might get
lucky.
2. We must poll once more after polling has stopped in case an event
occurred while stopping polling.
However, there are downsides:
1. Polling becomes a bottleneck when the number of event sources is very
high. It's more efficient to monitor fds in that case.
2. A high-frequency polling event source can starve non-polling event
sources because ppoll(2)/epoll(7) is never invoked.
This patch removes the forced polling iteration so that poll_ns=0 really
means no polling.
IOPS increases from 10k to 60k when the guest has 100
virtio-blk-pci,num-queues=32 devices and 1 virtio-blk-pci,num-queues=1
device because the large number of event sources being polled slows down
the event loop.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200305170806.1313245-2-stefanha@redhat.com
Message-Id: <20200305170806.1313245-2-stefanha@redhat.com>
QLIST_SAFE_REMOVE() is confusing here because the node must be on the
list. We actually just wanted to clear the linked list pointers when
removing it from the list. QLIST_REMOVE() now does this, so switch to
it.
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Link: https://lore.kernel.org/r/20200224103406.1894923-3-stefanha@redhat.com
Message-Id: <20200224103406.1894923-3-stefanha@redhat.com>
[desc]:
Large memory VM starts slowly when using -mem-prealloc, and
there are some areas to optimize in current method;
1、mmap will be used to alloc threads stack during create page
clearing threads, and it will attempt mm->mmap_sem for write
lock, but clearing threads have hold read lock, this competition
will cause threads createion very slow;
2、methods of calcuating pages for per threads is not well;if we use
64 threads to split 160 hugepage,63 threads clear 2page,1 thread
clear 34 page,so the entire speed is very slow;
to solve the first problem,we add a mutex in thread function,and
start all threads when all threads finished createion;
and the second problem, we spread remainder to other threads,in
situation that 160 hugepage and 64 threads, there are 32 threads
clear 3 pages,and 32 threads clear 2 pages.
[test]:
320G 84c VM start time can be reduced to 10s
680G 84c VM start time can be reduced to 18s
Signed-off-by: bauerchen <bauerchen@tencent.com>
Reviewed-by: Pan Rui <ruippan@tencent.com>
Reviewed-by: Ivan Ren <ivanren@tencent.com>
[Simplify computation of the number of pages per thread. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The virtual-device fuzzer must initialize QOM, prior to running
vl:qemu_init, so that it can use the qos_graph to identify the arguments
required to initialize a guest for libqos-assisted fuzzing. This change
prevents errors when vl:qemu_init tries to (re)initialize the previously
initialized QOM module.
Signed-off-by: Alexander Bulekov <alxndr@bu.edu>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Darren Kenny <darren.kenny@oracle.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-id: 20200220041118.23264-4-alxndr@bu.edu
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
File descriptor monitoring is O(1) with epoll(7), but
aio_dispatch_handlers() still scans all AioHandlers instead of
dispatching just those that are ready. This makes aio_poll() O(n) with
respect to the total number of registered handlers.
Add a local ready_list to aio_poll() so that each nested aio_poll()
builds a list of handlers ready to be dispatched. Since file descriptor
polling is level-triggered, nested aio_poll() calls also see fds that
were ready in the parent but not yet dispatched. This guarantees that
nested aio_poll() invocations will dispatch all fds, even those that
became ready before the nested invocation.
Since only handlers ready to be dispatched are placed onto the
ready_list, the new aio_dispatch_ready_handlers() function provides O(1)
dispatch.
Note that AioContext polling is still O(n) and currently cannot be fully
disabled. This still needs to be fixed before aio_poll() is fully O(1).
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-6-stefanha@redhat.com
[Fix compilation error on macOS where there is no epoll(87). The
aio_epoll() prototype was out of date and aio_add_ready_list() needed to
be moved outside the ifdef.
--Stefan]
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
It is not necessary to scan all AioHandlers for deletion. Keep a list
of deleted handlers instead of scanning the full list of all handlers.
The AioHandler->deleted field can be dropped. Let's check if the
handler has been inserted into the deleted list instead. Add a new
QLIST_IS_INSERTED() API for this check.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-5-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Don't pass the nanosecond timeout into epoll_wait(), which expects
milliseconds.
The epoll_wait() timeout value does not matter if qemu_poll_ns()
determined that the poll fd is ready, but passing a value in the wrong
units is still ugly. Pass a 0 timeout to epoll_wait() instead.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-3-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
epoll_handler is a stack variable and must not be accessed after it goes
out of scope:
if (aio_epoll_check_poll(ctx, pollfds, npfd, timeout)) {
AioHandler epoll_handler;
...
add_pollfd(&epoll_handler);
ret = aio_epoll(ctx, pollfds, npfd, timeout);
} ...
...
/* if we have any readable fds, dispatch event */
if (ret > 0) {
for (i = 0; i < npfd; i++) {
nodes[i]->pfd.revents = pollfds[i].revents;
}
}
nodes[0] is &epoll_handler, which has already gone out of scope.
There is no need to use pollfds[] for epoll. We don't need an
AioHandler for the epoll fd.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Message-id: 20200214171712.541358-2-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The ctx->first_bh list contains all created BHs, including those that
are not scheduled. The list is iterated by the event loop and therefore
has O(n) time complexity with respected to the number of created BHs.
Rewrite BHs so that only scheduled or deleted BHs are enqueued.
Only BHs that actually require action will be iterated.
One semantic change is required: qemu_bh_delete() enqueues the BH and
therefore invokes aio_notify(). The
tests/test-aio.c:test_source_bh_delete_from_cb() test case assumed that
g_main_context_iteration(NULL, false) returns false after
qemu_bh_delete() but it now returns true for one iteration. Fix up the
test case.
This patch makes aio_compute_timeout() and aio_bh_poll() drop from a CPU
profile reported by perf-top(1). Previously they combined to 9% CPU
utilization when AioContext polling is commented out and the guest has 2
virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32 devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200221093951.1414693-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The first rcu_read_lock/unlock() is expensive. Nested calls are cheap.
This optimization increases IOPS from 73k to 162k with a Linux guest
that has 2 virtio-blk,num-queues=1 and 99 virtio-blk,num-queues=32
devices.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 20200218182708.914552-1-stefanha@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=hrAW
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/dgibson/tags/ppc-for-5.0-20200221' into staging
ppc patch queue 2020-02-21
Here's the next patch of ppc target patches. Highlights are:
* Some fixes for CAS / unplug interactions
* Remove some leaks of device trees
* Some fixes for the PHB3 and PHB4 devices
* Support for NVDIMMs on the pseries machine type
* Assorted other fixes and cleanups
# gpg: Signature made Fri 21 Feb 2020 03:35:40 GMT
# gpg: using RSA key 75F46586AE61A66CC44E87DC6C38CACA20D9B392
# gpg: Good signature from "David Gibson <david@gibson.dropbear.id.au>" [full]
# gpg: aka "David Gibson (Red Hat) <dgibson@redhat.com>" [full]
# gpg: aka "David Gibson (ozlabs.org) <dgibson@ozlabs.org>" [full]
# gpg: aka "David Gibson (kernel.org) <dwg@kernel.org>" [unknown]
# Primary key fingerprint: 75F4 6586 AE61 A66C C44E 87DC 6C38 CACA 20D9 B392
* remotes/dgibson/tags/ppc-for-5.0-20200221:
hw/ppc/virtex_ml507:fix leak of fdevice tree blob
spapr: Fix handling of unplugged devices during CAS and migration
spapr: Don't use spapr_drc_needed() in CAS code
ppc: free 'fdt' after reset the machine
target/ppc/cpu.h: Clean up comments in the struct CPUPPCState definition
target/ppc/cpu.h: Move fpu related members closer in cpu env
target/ppc: Fix typo in comments
spapr: Allow changing offset for -kernel image
pnv/phb3: Add missing break statement
pnv/phb4: Fix error path in pnv_pec_realize()
pnv/phb3: Convert 1u to 1ull
target/ppc/cpu.h: Remove duplicate includes
spapr: Add Hcalls to support PAPR NVDIMM device
spapr: Add NVDIMM device support
nvdimm: add uuid property to nvdimm
mem: move nvdimm_device_list to utilities
ppc: function to setup latest class options
ppc/pnv: Fix PCI_EXPRESS dependency
qtest: Fix rtas dependencies
spapr/rtas: Print message from "ibm,os-term"
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
nvdimm_device_list is required for parsing the list for devices
in subsequent patches. Move it to common utility area.
Signed-off-by: Shivaprasad G Bhat <sbhat@linux.ibm.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <158131055857.2897.15658377276504711773.stgit@lep8c.aus.stglabs.ibm.com>
Signed-off-by: David Gibson <david@gibson.dropbear.id.au>
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
-----BEGIN PGP SIGNATURE-----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=WAH+
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/vivier2/tags/linux-user-for-5.0-pull-request' into staging
Implement membarrier, SO_RCVTIMEO and SO_SNDTIMEO
Disable by default build of fdt, slirp and tools with linux-user
Improve strace and use qemu_log to send trace to a file
Add partial ALSA ioctl supports
# gpg: Signature made Thu 20 Feb 2020 09:20:20 GMT
# gpg: using RSA key CD2F75DDC8E3A4DC2E4F5173F30C38BD3F2FBE3C
# gpg: issuer "laurent@vivier.eu"
# gpg: Good signature from "Laurent Vivier <lvivier@redhat.com>" [full]
# gpg: aka "Laurent Vivier <laurent@vivier.eu>" [full]
# gpg: aka "Laurent Vivier (Red Hat) <lvivier@redhat.com>" [full]
# Primary key fingerprint: CD2F 75DD C8E3 A4DC 2E4F 5173 F30C 38BD 3F2F BE3C
* remotes/vivier2/tags/linux-user-for-5.0-pull-request:
linux-user: Add support for selected alsa timer instructions using ioctls
linux-user: Add support for getting/setting selected alsa timer parameters using ioctls
linux-user: Add support for selecting alsa timer using ioctl
linux-user: Add support for getting/setting specified alsa timer parameters using ioctls
linux-user: Add support for getting alsa timer version and id
linux-user: remove gemu_log from the linux-user tree
linux-user: Use `qemu_log' for strace
linux-user: Use `qemu_log' for non-strace logging
configure: Avoid compiling system tools on user build by default
linux-user/strace: Improve output of various syscalls
configure: linux-user doesn't need neither fdt nor slirp
linux-user: implement getsockopt SO_RCVTIMEO and SO_SNDTIMEO
linux-user: Implement membarrier syscall
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This change switches linux-user strace logging to use the newer `qemu_log`
logging subsystem rather than the older `gemu_log` (notice the "g")
logger. `qemu_log` has several advantages, namely that it allows logging
to a file, and provides a more unified interface for configuration
of logging (via the QEMU_LOG environment variable or options).
This change introduces a new log mask: `LOG_STRACE` which is used for
logging of user-mode strace messages.
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Signed-off-by: Josh Kunz <jkz@google.com>
Message-Id: <20200204025416.111409-3-jkz@google.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
In a few places we report errno formatted as a negative integer.
This is not as user friendly as it can be. Use strerror() and/or
error_setg_errno() instead.
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Ján Tomko <jtomko@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Eric Auger <eric.auger@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Alex Williamson <alex.williamson@redhat.com>
Message-Id: <4949c3ecf1a32189b8a4b5eb4b0fd04c1122501d.1581674006.git.mprivozn@redhat.com>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Some older parts of QEMU's codebase assume that CLOCK_MONOTONIC
might not be defined by the host OS, and have workarounds to
deal with this. However, more recently (notably in commit
50290c002c for qemu-img in mid-2019, but also much
earlier in 2011 in commit 22795174a3 for ui/spice-display.c)
we've written code that assumes CLOCK_MONOTONIC is always
defined. The only host OS anybody's ever noticed this on
is OSX 10.11 and earlier, which we don't support.
So we can assume that all our host OSes have the #define,
and we can remove some now-unnecessary ifdefs.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-Id: <20200201172252.6605-1-peter.maydell@linaro.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
NULL is a valid log filename used to indicate we want to use stderr
but qemu_set_log_filename (which is called by bsd-user/main.c) was not
handling it correctly.
That also made redundant a couple of NULL checks in calling code which
have been removed.
Signed-off-by: Salvador Fandino <salvador@qindel.com>
Message-Id: <20200123193626.19956-1-salvador@qindel.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
uClibc defines _SC_LEVEL1_ICACHE_LINESIZE and _SC_LEVEL1_DCACHE_LINESIZE
but the corresponding sysconf calls returns -1, which is a valid result,
meaning that the limit is indeterminate.
Handle this situation using the fallback values instead of crashing due
to an assertion failure.
Signed-off-by: Carlos Santos <casantos@redhat.com>
Message-Id: <20191017123713.30192-1-casantos@redhat.com>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2.0.22 (GNU/Linux)
iQEcBAABAgAGBQJeFbG8AAoJEL/70l94x66DCpMIAKBwxBL+VegqI+ySKgmtIBQX
LtU+ardEeZ37VfWfvuWzTFe+zQ0hsFpz/e0LHE7Ae+LVLMNWXixlmMrTIm+Xs762
hJzxBjhUhkdrMioVYTY16Kqap4Nqaxu70gDQ32Ve2sY6xYGxYLSaJooBOU5bXVgb
HPspHFVpeP6ZshBd1n2LXsgURE6v3AjTwqcsPCkL/AESFdkdOsoHeXjyKWJG1oPy
W7btzlUEqVsauZI8/PhhW/8hZUvUsJVHonYLTZTyy8aklU7aOILSyT2uPXFBVUVQ
irkQjLtD4dWlogBKO4i/QHMuwV+Asa57WNPmqv3EcIWPUWmTY84H0g2AxRgcc2M=
=48jx
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/bonzini/tags/for-upstream' into staging
* Compat machines fix (Denis)
* Command line parsing fixes (Michal, Peter, Xiaoyao)
* Cooperlake CPU model fixes (Xiaoyao)
* i386 gdb fix (mkdolata)
* IOEventHandler cleanup (Philippe)
* icount fix (Pavel)
* RR support for random number sources (Pavel)
* Kconfig fixes (Philippe)
# gpg: Signature made Wed 08 Jan 2020 10:41:00 GMT
# gpg: using RSA key BFFBD25F78C7AE83
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
# Primary key fingerprint: 46F5 9FBD 57D6 12E7 BFD4 E2F7 7E15 100C CD36 69B1
# Subkey fingerprint: F133 3857 4B66 2389 866C 7682 BFFB D25F 78C7 AE83
* remotes/bonzini/tags/for-upstream: (38 commits)
chardev: Use QEMUChrEvent enum in IOEventHandler typedef
chardev: use QEMUChrEvent instead of int
chardev/char: Explicit we ignore some QEMUChrEvent in IOEventHandler
monitor/hmp: Explicit we ignore a QEMUChrEvent in IOEventHandler
monitor/qmp: Explicit we ignore few QEMUChrEvent in IOEventHandler
virtio-console: Explicit we ignore some QEMUChrEvent in IOEventHandler
vhost-user-blk: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-net: Explicit we ignore few QEMUChrEvent in IOEventHandler
vhost-user-crypto: Explicit we ignore some QEMUChrEvent in IOEventHandler
ccid-card-passthru: Explicit we ignore QEMUChrEvent in IOEventHandler
hw/usb/redirect: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/usb/dev-serial: Explicit we ignore few QEMUChrEvent in IOEventHandler
hw/char/terminal3270: Explicit ignored QEMUChrEvent in IOEventHandler
hw/ipmi: Explicit we ignore some QEMUChrEvent in IOEventHandler
hw/ipmi: Remove unnecessary declarations
target/i386: Add missed features to Cooperlake CPU model
target/i386: Add new bit definitions of MSR_IA32_ARCH_CAPABILITIES
target/i386: Fix handling of k_gs_base register in 32-bit mode in gdbstub
hw/rtc/mc146818: Add missing dependency on ISA Bus
hw/nvram/Kconfig: Restrict CHRP NVRAM to machines using OpenBIOS or SLOF
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Internally, qemu may create chardev without ID. Those will not be
looked up with qemu_chr_find(), which prevents using qdev_prop_set_chr().
Use id_generate(), to generate an internal name (prefixed with #), so
no conflict exist with user-named chardev.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: xiaoqiang zhao <zxq_yx_007@163.com>
Record/replay feature of icount allows deterministic running of execution
scenarios. Some CPUs and peripheral devices read random numbers from
external sources making deterministic execution impossible.
This patch adds recording and replaying of random read operations
into guest-random module, which is used by the virtual hardware.
Signed-off-by: Pavel Dovgalyuk <Pavel.Dovgaluk@ispras.ru>
Message-Id: <157675984852.14505.15709141760677102489.stgit@pasha-Precision-3630-Tower>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
-----BEGIN PGP SIGNATURE-----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=M4kD
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/elmarco/tags/dbus-vmstate7-pull-request' into staging
Add dbus-vmstate
Hi,
With external processes or helpers participating to the VM support, it
becomes necessary to handle their migration. Various options exist to
transfer their state:
1) as the VM memory, RAM or devices (we could say that's how
vhost-user devices can be handled today, they are expected to
restore from ring state)
2) other "vmstate" (as with TPM emulator state blobs)
3) left to be handled by management layer
1) is not practical, since an external processes may legitimatelly
need arbitrary state date to back a device or a service, or may not
even have an associated device.
2) needs ad-hoc code for each helper, but is simple and working
3) is complicated for management layer, QEMU has the migration timing
The proposed "dbus-vmstate" object will connect to a given D-Bus
address, and save/load from org.qemu.VMState1 owners on migration.
Thus helpers can easily have their state migrated with QEMU, without
implementing ad-hoc support (such as done for TPM emulation)
D-Bus is ubiquitous on Linux (it is systemd IPC), and can be made to
work on various other OSes. There are several implementations and good
bindings for various languages. (the tests/dbus-vmstate-test.c is a
good example of how simple the implementation of services can be, even
in C)
dbus-vmstate is put into use by the libvirt series "[PATCH 00/23] Use
a slirp helper process".
v2:
- fix build with broken mingw-glib
# gpg: Signature made Mon 06 Jan 2020 14:43:35 GMT
# gpg: using RSA key 87A9BD933F87C606D276F62DDAE8E10975969CE5
# gpg: issuer "marcandre.lureau@redhat.com"
# gpg: Good signature from "Marc-André Lureau <marcandre.lureau@redhat.com>" [full]
# gpg: aka "Marc-André Lureau <marcandre.lureau@gmail.com>" [full]
# Primary key fingerprint: 87A9 BD93 3F87 C606 D276 F62D DAE8 E109 7596 9CE5
* remotes/elmarco/tags/dbus-vmstate7-pull-request:
tests: add dbus-vmstate-test
tests: add migration-helpers unit
dockerfiles: add dbus-daemon to some of latest distributions
configure: add GDBUS_CODEGEN
Add dbus-vmstate object
util: add dbus helper unit
docs: start a document to describe D-Bus usage
vmstate: replace DeviceState with VMStateIf
vmstate: add qom interface to get id
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add a helper function to match qemu_open() which may return files
under the /dev/fdset prefix. Those shouldn't be removed, since it's
only a qemu namespace.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This now allows changing the logfile while logging is active,
and also solves the issue of a seg fault while changing the logfile.
Any read access to the qemu_logfile handle will use
the rcu_read_lock()/unlock() around the use of the handle.
To fetch the handle we will use atomic_rcu_read().
We also in many cases do a check for validity of the
logfile handle before using it to deal with the case where the
file is closed and set to NULL.
The cases where we write to the qemu_logfile will use atomic_rcu_set().
Writers will also use call_rcu() with a newly added qemu_logfile_free
function for freeing/closing when readers have finished.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-6-robert.foley@linaro.org>
Also added qemu_logfile_init() for initializing the logfile mutex.
Note that inside qemu_set_log() we needed to add a pair of
qemu_mutex_unlock() calls in order to avoid a double lock in
qemu_log_close(). This unavoidable temporary ugliness will be
cleaned up in a later patch in this series.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-4-robert.foley@linaro.org>
Also added some explanation of the reasoning behind the branches.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-3-robert.foley@linaro.org>
After freeing the logfilename, we set logfilename to NULL, in case of an
error which returns without setting logfilename.
Signed-off-by: Robert Foley <robert.foley@linaro.org>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20191118211528.3221-2-robert.foley@linaro.org>
qemu_strtoi64() assumes int64_t is long long. This is marked FIXME.
Replace by a QEMU_BUILD_BUG_ON() to avoid surprises.
Same for qemu_strtou64().
Fix a typo in qemu_strtoul()'s contract while there.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191125133846.27790-2-armbru@redhat.com>
[lv: removed trailing whitespace]
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Mostly, Error ** is for returning error from the function, so the
callee sets it. However these three functions get already filled errp
parameter. They don't change the pointer itself, only change the
internal state of referenced Error object. So we can make it
Error *const * errp, to stress the behavior. It will also help
coccinelle script (in future) to distinguish such cases from common
errp usage.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-Id: <20191205174635.18758-4-vsementsov@virtuozzo.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Commit message typo fixed]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
-msg parameter "timestamp" defaults to "off" if you don't specify msg,
and to "on" if you do. Messed up right in commit 5e2ac51917 "add
timestamp to error_report()". Mostly harmless, because "timestamp" is
the only parameter, so "if you do" is "-msg ''", which nobody does.
Change the default to "off" no matter what.
While there, rename enable_timestamp_msg to error_with_timestamp, and
polish documentation.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191010081508.8978-1-armbru@redhat.com>
The automatic rcu read lock maintenance works quite
nicely in this case where it previously relied on a comment to
delimit the lifetime and now has a block.
Signed-off-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The stubs mechanism relies on static libraries and compilation order,
which is a bit brittle and should be avoided unless necessary.
Replace it with Boolean operations on CONFIG_* symbols.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Add an option to trigger memory writeback to sync given memory region
with the corresponding backing store, case one is available.
This extends the support for persistent memory, allowing syncing on-demand.
Signed-off-by: Beata Michalska <beata.michalska@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20191121000843.24844-3-beata.michalska@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Clang does not like do_strtosz()'s code to guard against overflow:
qemu/util/cutils.c:245:23: error: implicit conversion from 'unsigned long' to 'double' changes value from 18446744073709550592 to 18446744073709551616 [-Werror,-Wimplicit-int-float-conversion]
The warning will be enabled by default in clang 10. It is not
available for clang <= 9.
val * mul >= 0xfffffffffffffc00 is indeed wrong. 0xfffffffffffffc00
is not representable exactly as double. It's half-way between the
representable values 0xfffffffffffff800 and 0x10000000000000000.
Which one we get is implementation-defined. Bad.
We want val * mul > (the largest uint64_t exactly representable as
double). That's 0xfffffffffffff800. Write it as nextafter(0x1p64, 0)
with a suitable comment.
Signed-off-by: Fangrui Song <i@maskray.me>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
[Patch split, commit message improved]
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20191122080039.12771-3-armbru@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Juan Quintela <quintela@redhat.com>
Coverity warns that we store the address of a stack variable through a
pointer passed in by the caller, which would let the caller trivially
trigger use-after-free if that stored value is still present when we
finish execution. However, the way coroutines work is that after our
call to qemu_coroutine_yield(), control is temporarily continued in
the caller prior to our function concluding, and in order to resume
our coroutine, the caller must poll until the variable has been set to
NULL. Thus, we can add an assert that we do not leak stack storage to
the caller on function exit.
Fixes: Coverity CID 1406474
CC: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Eric Blake <eblake@redhat.com>
Message-Id: <20191111203524.21912-1-eblake@redhat.com>
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl23BZMACgkQ+9DbCVqe
KkRPegf/QHygZ4ER2jOaWEookxiOEcik+dzQKVGNqLNXeMLvo5fGjGVpFoFxSgfv
ZvCAL4xbW44zsYlVfh59tfn4Tu9qK7s7/qM3WXpHsmuvEuhoWef0Lt2jSe+D46Rs
KeG/aX+rHLUR8rr9eCgE+1/MQmxPUj3VUonkUpNkk2ebBbSNoLSOudB4DD9Vcyl7
Pya1kPvA6W9bwI20ZSWihE7flg13o62Pp+LgAFLrsfxXOxOMkPrU8Pp+B0Dvr+hL
5Oh0clZLhiRi75x+KVGZ90TVsoftdjYoOWGMOudS/+NNmqKT1NTLm0K1WJYyRMQ1
V0ne4/OcGNq7x8gcOx/xs09ADu5/VA==
=UXR/
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tcg-plugins-281019-4' into staging
TCG Plugins initial implementation
- use --enable-plugins @ configure
- low impact introspection (-plugin empty.so to measure overhead)
- plugins cannot alter guest state
- example plugins included in source tree (tests/plugins)
- -d plugin to enable plugin output in logs
- check-tcg runs extra tests when plugins enabled
- documentation in docs/devel/plugins.rst
# gpg: Signature made Mon 28 Oct 2019 15:13:23 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tcg-plugins-281019-4: (57 commits)
travis.yml: enable linux-gcc-debug-tcg cache
MAINTAINERS: add me for the TCG plugins code
scripts/checkpatch.pl: don't complain about (foo, /* empty */)
.travis.yml: add --enable-plugins tests
include/exec: wrap cpu_ldst.h in CONFIG_TCG
accel/stubs: reduce headers from tcg-stub
tests/plugin: add hotpages to analyse memory access patterns
tests/plugin: add instruction execution breakdown
tests/plugin: add a hotblocks plugin
tests/tcg: enable plugin testing
tests/tcg: drop test-i386-fprem from TESTS when not SLOW
tests/tcg: move "virtual" tests to EXTRA_TESTS
tests/tcg: set QEMU_OPTS for all cris runs
tests/tcg/Makefile.target: fix path to config-host.mak
tests/plugin: add sample plugins
linux-user: support -plugin option
vl: support -plugin option
plugin: add qemu_plugin_outs helper
plugin: add qemu_plugin_insn_disas helper
plugin: expand the plugin_init function to include an info block
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Having the plugins grab stdout and spew stuff there is a bit ugly and
certainly makes the tests look ugly. Provide a hook back into QEMU
which can be redirected as needed.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Aaron Lindsay <aaron@os.amperecomputing.com>
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
-----BEGIN PGP SIGNATURE-----
iQFGBAABCAAwFiEEkb62CjDbPohX0Rgp9AfbAGHVz0AFAl2224ESHG1yZWl0ekBy
ZWRoYXQuY29tAAoJEPQH2wBh1c9AeXMH/RXKEX4BZYMRKCe41P18tJC9Bl2x0T20
YeOsZVvpARlr7o/36BF2kGFF4MnL0OQ+9ELuyROX865rk/VL2rWqnHDE5oQM889a
dFwMs+0zvNbig3iLNcw0H5OkE2mrdM+a1EUdn/lBe/39Z8dPqPxRGqIYHq38Ugdu
emwSy1nWen7o0f71HRJfyVtI3KcrzXx71FrA/FY2yL/eHz+zRYGZj2SpAdFPkXP/
lgaz+m0tWhnSW1QzEOXB0Gh69ULt/DczCinYmv5qUY1noW5TPPtiDNCQTts5O4ba
oJsR3AJv5/l9m65JTmiyQSqnQfPcstrQ5FqOcSnP637cfqUFyWsvdks=
=L7v1
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/maxreitz/tags/pull-block-2019-10-28' into staging
Block patches for softfreeze:
- iotest patches
- Improve performance of the mirror block job in write-blocking mode
- Limit memory usage for the backup block job
- Add discard and write-zeroes support to the NVMe host block driver
- Fix a bug in the mirror job
- Prevent the qcow2 driver from creating technically non-compliant qcow2
v3 images (where there is not enough extra data for snapshot table
entries)
- Allow callers of bdrv_truncate() (etc.) to determine whether the file
must be resized to the exact given size or whether it is OK for block
devices not to shrink
# gpg: Signature made Mon 28 Oct 2019 12:13:53 GMT
# gpg: using RSA key 91BEB60A30DB3E8857D11829F407DB0061D5CF40
# gpg: issuer "mreitz@redhat.com"
# gpg: Good signature from "Max Reitz <mreitz@redhat.com>" [full]
# Primary key fingerprint: 91BE B60A 30DB 3E88 57D1 1829 F407 DB00 61D5 CF40
* remotes/maxreitz/tags/pull-block-2019-10-28: (69 commits)
qemu-iotests: restrict 264 to qcow2 only
Revert "qemu-img: Check post-truncation size"
block: Pass truncate exact=true where reasonable
block: Let format drivers pass @exact
block: Evaluate @exact in protocol drivers
block: Add @exact parameter to bdrv_co_truncate()
block: Do not truncate file node when formatting
block/cor: Drop cor_co_truncate()
block: Handle filter truncation like native impl.
iotests: Test qcow2's snapshot table handling
iotests: Add peek_file* functions
qcow2: Fix v3 snapshot table entry compliancy
qcow2: Repair snapshot table with too many entries
qcow2: Fix overly long snapshot tables
qcow2: Keep track of the snapshot table length
qcow2: Fix broken snapshot table entries
qcow2: Add qcow2_check_fix_snapshot_table()
qcow2: Separate qcow2_check_read_snapshot_table()
qcow2: Write v3-compliant snapshot list on upgrade
qcow2: Put qcow2_upgrade() into its own function
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Introduce an API for some shared splittable resource, like memory.
It's going to be used by backup. Backup uses both read/write io and
copy_range. copy_range may consume memory implictly, so the new API is
abstract: it doesn't allocate any real memory but only hands out
tickets.
The idea is that we have some total amount of something and callers
should wait in coroutine queue if there is not enough of the resource
at the moment.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
Message-id: 20191022111805.3432-5-vsementsov@virtuozzo.com
Signed-off-by: Max Reitz <mreitz@redhat.com>
Passing zero length to these functions leads to unpredicted results.
Zero-length set/reset may occur in active-mirror, on zero-length write
(which is unlikely, but not guaranteed to never happen).
Let's just do nothing on zero-length request.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
Message-id: 20191011090711.19940-2-vsementsov@virtuozzo.com
Reviewed-by: Max Reitz <mreitz@redhat.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Max Reitz <mreitz@redhat.com>
There are three page size in qemu:
real host page size
host page size
target page size
All of them have dedicate variable to represent. For the last two, we
use the same form in the whole qemu project, while for the first one we
use two forms: qemu_real_host_page_size and getpagesize().
qemu_real_host_page_size is defined to be a replacement of
getpagesize(), so let it serve the role.
[Note] Not fully tested for some arch or device.
Signed-off-by: Wei Yang <richardw.yang@linux.intel.com>
Message-Id: <20191013021145.16011-3-richardw.yang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
