The SDRAM memory controller(DRAMC) controls the access to external
DDR4 and DDR5 SDRAM and power up to DDR4 and DDR5 PHY.
The DRAM memory controller of AST2700 is not backward compatible
to previous chips such AST2600, AST2500 and AST2400.
Max memory is now 8GiB on the AST2700. Introduce new
aspeed_2700_sdmc and class with read/write operation and
reset handlers.
Define DRAMC necessary protected registers and
unprotected registers for AST2700 and increase
the register set to 0x1000.
Add unlocked property to change controller protected status.
Incrementing the version of vmstate to 2.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 SLI engine is designed to accelerate the
throughput between cross-die connections.
It have CPU_SLI at CPU die and IO_SLI at IO die.
Introduce dummy AST2700 SLI and SLIIO models.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
AST2700 wdt controller is similiar to AST2600's wdt, but
the AST2700 has 8 watchdogs, and they each have 0x80 of registers.
Introduce ast2700 object class and increase the number of regs(offset) of
ast2700 model.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
The Aspeed SMC device model use to have a 'sdram_base' property. It
was removed by commit d177892d4a ("aspeed/smc: Remove unused
"sdram-base" property") because previous changes simplified the DMA
transaction model to use an offset in RAM and not the physical
address.
The AST2700 SoC has larger address space (64-bit) and a new register
DMA DRAM Side Address High Part (0x7C) is introduced to deal with the
high bits of the DMA address. To be able to compute the offset of the
DMA transaction, as done on the other SoCs, we will need to know where
the DRAM is mapped in the address space. Re-introduce a "dram-base"
property to hold this value.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Jamin Lin <jamin_lin@aspeedtech.com>
Signed-off-by: Cédric Le Goater <clg@redhat.com>
The n_threads argument is no longer used since the previous commit.
Remove it.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240527155851.892885-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Acked-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Libaio defines IO_CMD_FDSYNC command to sync all outstanding
asynchronous I/O operations, by flushing out file data to the
disk storage. Enable linux-aio to submit such aio request.
When using aio=native without fdsync() support, QEMU creates
pthreads, and destroying these pthreads results in TLB flushes.
In a real-time guest environment, TLB flushes cause a latency
spike. This patch helps to avoid such spikes.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Prasad Pandit <pjp@fedoraproject.org>
Message-ID: <20240425070412.37248-1-ppandit@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The main loop has two AioContexts: qemu_aio_context and iohandler_ctx.
The main loop runs them both, but nested aio_poll() calls on
qemu_aio_context exclude iohandler_ctx.
Which one should qemu_get_current_aio_context() return when called from
the main loop? Document that it's always qemu_aio_context.
This has subtle effects on functions that use
qemu_get_current_aio_context(). For example, aio_co_reschedule_self()
does not work when moving from iohandler_ctx to qemu_aio_context because
qemu_get_current_aio_context() does not differentiate these two
AioContexts.
Document this in order to reduce the chance of future bugs.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240506190622.56095-3-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Add a second mapcache for grant mappings. The mapcache for
grants needs to work with XC_PAGE_SIZE granularity since
we can't map larger ranges than what has been granted to us.
Like with foreign mappings (xen_memory), machines using grants
are expected to initialize the xen_grants MR and map it
into their address-map accordingly.
CC: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Pass the ram_addr offset to xen_map_cache.
This is in preparation for adding grant mappings that need
to compute the address within the RAMBlock.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
=RP7U
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* scsi-disk: Don't silently truncate serial number
* backends/hostmem: Report error on unavailable qemu_madvise() features or unaligned memory sizes
* target/i386: fixes and documentation for INHIBIT_IRQ/TF/RF and debugging
* i386/hvf: Adds support for INVTSC cpuid bit
* i386/hvf: Fixes for dirty memory tracking
* i386/hvf: Use hv_vcpu_interrupt() and hv_vcpu_run_until()
* hvf: Cleanups
* stubs: fixes for --disable-system build
* i386/kvm: support for FRED
* i386/kvm: fix MCE handling on AMD hosts
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZkF2oUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPNlQf+N9y6Eh0nMEEQ69twtV8ytglTY+uX
# FsogvnsXHNMVubOWmmeItM6kFXTAkR9cmFaL8dqI1Gs03xEQdQXbF1KejJZOAZVl
# RQMOW8Fg2Afr+0lwqCXHvhsmZ4hr5yUkRndyucA/E9AO2uGrtgwsWGDBGaHJOZIA
# lAsEMOZgKjXHZnefXjhMrvpk/QNovjEV6f1RHX3oKZjKSI5/G4IqGSmwNYToot8p
# 2fgs4Qti4+1gNyM2oBLq7cCMjMS61tSxOMH4uqVoIisjyckPlAFRvc+DXtKsUAAs
# 9AgM++pNgpB0IXv67czRUNdRoK7OI8I0ULhI4qHXi6Yg2QYAHqpQ6WL4Lg==
# =RP7U
# -----END PGP SIGNATURE-----
# gpg: Signature made Sat 08 Jun 2024 01:33:46 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (42 commits)
python: mkvenv: remove ensure command
Revert "python: use vendored tomli"
i386: Add support for overflow recovery
i386: Add support for SUCCOR feature
i386: Fix MCE support for AMD hosts
docs: i386: pc: Avoid mentioning limit of maximum vCPUs
target/i386: Add get/set/migrate support for FRED MSRs
target/i386: enumerate VMX nested-exception support
vmxcap: add support for VMX FRED controls
target/i386: mark CR4.FRED not reserved
target/i386: add support for FRED in CPUID enumeration
hvf: Makes assert_hvf_ok report failed expression
i386/hvf: Updates API usage to use modern vCPU run function
i386/hvf: In kick_vcpu use hv_vcpu_interrupt to force exit
i386/hvf: Fixes dirty memory tracking by page granularity RX->RWX change
hvf: Consistent types for vCPU handles
i386/hvf: Fixes some compilation warnings
i386/hvf: Adds support for INVTSC cpuid bit
stubs/meson: Fix qemuutil build when --disable-system
scsi-disk: Don't silently truncate serial number
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
When a macOS Hypervisor.framework call fails which is checked by
assert_hvf_ok(), Qemu exits printing the error value, but not the
location
in the code, as regular assert() macro expansions would.
This change turns assert_hvf_ok() into a macro similar to other
assertions, which expands to a call to the corresponding _impl()
function together with information about the expression that failed
the assertion and its location in the code.
Additionally, stringifying the numeric hv_return_t code is factored
into a helper function that can be reused for diagnostics and debugging
outside of assertions.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Message-ID: <20240605112556.43193-8-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
macOS Hypervisor.framework uses different types for identifying vCPUs, hv_vcpu_t or hv_vcpuid_t, depending on host architecture. They are not just differently named typedefs for the same primitive type, but reference different-width integers.
Instead of using an integer type and casting where necessary, this change introduces a typedef which resolves the active architecture’s hvf typedef. It also removes a now-unnecessary cast.
Signed-off-by: Phil Dennis-Jordan <phil@philjordan.eu>
Reviewed-by: Roman Bolshakov <roman@roolebo.dev>
Tested-by: Roman Bolshakov <roman@roolebo.dev>
Message-ID: <20240605112556.43193-4-phil@philjordan.eu>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
If memory-backend-{file,ram} has a size that's not aligned to
underlying page size it is not only wasteful, but also may lead
to hard to debug behaviour. For instance, in case
memory-backend-file and hugepages, madvise() and mbind() fail.
Rightfully so, page is the smallest unit they can work with. And
even though an error is reported, the root cause it not very
clear:
qemu-system-x86_64: Couldn't set property 'dump' on 'memory-backend-file': Invalid argument
After this commit:
qemu-system-x86_64: backend 'memory-backend-file' memory size must be multiple of 2 MiB
Signed-off-by: Michal Privoznik <mprivozn@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Message-ID: <b5b9f9c6bba07879fb43f3c6f496c69867ae3716.1717584048.git.mprivozn@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch adds a new board attribute 'v-eiointc'.
A value of true enables the virt extended I/O interrupt controller.
VMs working in kvm mode have 'v-eiointc' enabled by default.
Signed-off-by: Song Gao <gaosong@loongson.cn>
Reviewed-by: Bibo Mao <maobibo@loongson.cn>
Message-Id: <20240528083855.1912757-4-gaosong@loongson.cn>
Generalize the current 1 byte unit and 4 byte blocking
within the output.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240412073346.458116-5-richard.henderson@linaro.org>
Allocate a new, or append to an existing GString instead of
using a fixed sized buffer. Require the caller to determine
the length of the line -- do not bound len here.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20240412073346.458116-4-richard.henderson@linaro.org>
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
-----BEGIN PGP SIGNATURE-----
iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
=qQeP
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://gitlab.com/bonzini/qemu into staging
* virtio-blk: remove SCSI passthrough functionality
* require x86-64-v2 baseline ISA
* SEV-SNP host support
* fix xsave.flat with TCG
* fixes for CPUID checks done by TCG
# -----BEGIN PGP SIGNATURE-----
#
# iQFIBAABCAAyFiEE8TM4V0tmI4mGbHaCv/vSX3jHroMFAmZgKVYUHHBib256aW5p
# QHJlZGhhdC5jb20ACgkQv/vSX3jHroPKYgf/QkWrNXdjjD3yAsv5LbJFVTVyCYW3
# b4Iax29kEDy8k9wbzfLxOfIk9jXIjmbOMO5ZN9LFiHK6VJxbXslsMh6hm50M3xKe
# 49X1Rvf9YuVA7KZX+dWkEuqLYI6Tlgj3HaCilYWfXrjyo6hY3CxzkPV/ChmaeYlV
# Ad4Y8biifoUuuEK8OTeTlcDWLhOHlFXylG3AXqULsUsXp0XhWJ9juXQ60eATv/W4
# eCEH7CSmRhYFu2/rV+IrWFYMnskLRTk1OC1/m6yXGPKOzgnOcthuvQfiUgPkbR/d
# llY6Ni5Aaf7+XX3S7Avcyvoq8jXzaaMzOrzL98rxYGDR1sYBYO+4h4ZToA==
# =qQeP
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 05 Jun 2024 02:01:10 AM PDT
# gpg: using RSA key F13338574B662389866C7682BFFBD25F78C7AE83
# gpg: issuer "pbonzini@redhat.com"
# gpg: Good signature from "Paolo Bonzini <bonzini@gnu.org>" [full]
# gpg: aka "Paolo Bonzini <pbonzini@redhat.com>" [full]
* tag 'for-upstream' of https://gitlab.com/bonzini/qemu: (46 commits)
hw/i386: Add support for loading BIOS using guest_memfd
hw/i386/sev: Use guest_memfd for legacy ROMs
memory: Introduce memory_region_init_ram_guest_memfd()
i386/sev: Allow measured direct kernel boot on SNP
i386/sev: Reorder struct declarations
i386/sev: Extract build_kernel_loader_hashes
i386/sev: Enable KVM_HC_MAP_GPA_RANGE hcall for SNP guests
i386/kvm: Add KVM_EXIT_HYPERCALL handling for KVM_HC_MAP_GPA_RANGE
i386/sev: Invoke launch_updata_data() for SNP class
i386/sev: Invoke launch_updata_data() for SEV class
hw/i386/sev: Add support to encrypt BIOS when SEV-SNP is enabled
i386/sev: Add support for SNP CPUID validation
i386/sev: Add support for populating OVMF metadata pages
hw/i386/sev: Add function to get SEV metadata from OVMF header
i386/sev: Set CPU state to protected once SNP guest payload is finalized
i386/sev: Add handling to encrypt/finalize guest launch data
i386/sev: Add the SNP launch start context
i386/sev: Update query-sev QAPI format to handle SEV-SNP
i386/sev: Add a class method to determine KVM VM type for SNP guests
i386/sev: Don't return launch measurements for SEV-SNP guests
...
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Introduce memory_region_init_ram_guest_memfd() to allocate private
guset memfd on the MemoryRegion initialization. It's for the use case of
TDVF, which must be private on TDX case.
Signed-off-by: Xiaoyao Li <xiaoyao.li@intel.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-4-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
In SNP, the hashes page designated with a specific metadata entry
published in AmdSev OVMF.
Therefore, if the user enabled kernel hashes (for measured direct boot),
QEMU should prepare the content of hashes table, and during the
processing of the metadata entry it copy the content into the designated
page and encrypt it.
Note that in SNP (unlike SEV and SEV-ES) the measurements is done in
whole 4KB pages. Therefore QEMU zeros the whole page that includes the
hashes table, and fills in the kernel hashes area in that page, and then
encrypts the whole page. The rest of the page is reserved for SEV
launch secrets which are not usable anyway on SNP.
If the user disabled kernel hashes, QEMU pre-validates the kernel hashes
page as a zero page.
Signed-off-by: Dov Murik <dovmurik@linux.ibm.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-24-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
As with SEV, an SNP guest requires that the BIOS be part of the initial
encrypted/measured guest payload. Extend sev_encrypt_flash() to handle
the SNP case and plumb through the GPA of the BIOS location since this
is needed for SNP.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-25-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A recent version of OVMF expanded the reset vector GUID list to add
SEV-specific metadata GUID. The SEV metadata describes the reserved
memory regions such as the secrets and CPUID page used during the SEV-SNP
guest launch.
The pc_system_get_ovmf_sev_metadata_ptr() is used to retieve the SEV
metadata pointer from the OVMF GUID list.
Signed-off-by: Brijesh Singh <brijesh.singh@amd.com>
Signed-off-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Pankaj Gupta <pankaj.gupta@amd.com>
Message-ID: <20240530111643.1091816-19-pankaj.gupta@amd.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Ask the ConfidentialGuestSupport object whether to use guest_memfd
for KVM-backend private memory. This bool can be set in instance_init
(or user_complete) so that it is available when the machine is created.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Right now QEMU is importing arch/x86/include/uapi/asm/kvm_para.h
because it includes definitions for kvmclock and for KVM CPUID
bits. However, other definitions for KVM hypercall values and return
codes are included in include/uapi/linux/kvm_para.h and they will be
used by SEV-SNP.
To ensure that it is possible to include both <linux/kvm_para.h> and
"standard-headers/asm-x86/kvm_para.h" without conflicts, provide
linux/kvm_para.h as a portable header too, and forward linux-headers/
files to those in include/standard-headers. Note that <linux/kvm_para.h>
will include architecture-specific definitions as well, but
"standard-headers/linux/kvm_para.h" will not because it can be used in
architecture-independent files.
This could easily be extended to other architectures, but right now
they do not need any symbol in their specific kvm_para.h files.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Linux has <misc/pvpanic.h>, not <linux/pvpanic.h>. Use the same
directory for QEMU's include/standard-headers/ copy.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Align the framebuffer backend with the other legacy ones,
register it via xen_backend_init() when '-vga xenfb' is
used. It is safe because MODULE_INIT_XEN_BACKEND is called
in xen_bus_realize(), long after CLI processing initialized
the vga_interface_type variable.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-8-philmd@linaro.org>
Keep XenDevOps structures in .rodata.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-5-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-4-philmd@linaro.org>
XenDevOps @ops is not updated, mark it const.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Paul Durrant <paul@xen.org>
Message-Id: <20240510104908.76908-3-philmd@linaro.org>
Add xen_mr_is_memory() to abstract away tests for the
xen_memory MR.
No functional changes.
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@amd.com>
Reviewed-by: Stefano Stabellini <sstabellini@kernel.org>
Acked-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240529140739.1387692-4-edgar.iglesias@gmail.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Aside from the round robin threads this is all common code. By
moving the halt_cond setup we also no longer need hacks to work around
the race between QOM object creation and thread creation.
It is a little ugly to free stuff up for the round robin thread but
better it deal with its own specialises than making the other
accelerators jump through hoops.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-3-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Make the relationship between CPUState, ArchCPU and cpu_env a bit
clearer in the kdoc comments.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Reviewed-by: Pierrick Bouvier <pierrick.bouvier@linaro.org>
Message-ID: <20240530194250.1801701-2-alex.bennee@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Split out asciidump_line as a separate function, local to hexdump.c,
for use by qemu_hexdump. Use "%-*s" to generate the alignment
between the hex and the ascii, rather than explicit spaces.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-3-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Require that the caller output the offset and increment bufptr.
Use QEMU_HEXDUMP_LINE_BYTES in vhost_vdpa_dump_config instead
of raw integer.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240412073346.458116-2-richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
While netmap implements virtio-net header, it does not implement
receive_raw(). Instead of implementing receive_raw for netmap, add
virtio-net headers in the common code and use receive_iov()/receive()
instead. This also fixes the buffer size for the virtio-net header.
Fixes: fbbdbddec0 ("tap: allow extended virtio header with hash info")
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
Since qemu_set_vnet_hdr_len() is always called when
qemu_using_vnet_hdr() is called, we can merge them and save some code.
For consistency, express that the virtio-net header is not in use by
returning 0 with qemu_get_vnet_hdr_len() instead of having a dedicated
function, qemu_get_using_vnet_hdr().
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Signed-off-by: Jason Wang <jasowang@redhat.com>
This patch adds support for MCQ defined in UFSHCI 4.0. This patch
utilized the legacy I/O codes as much as possible to support MCQ.
MCQ operation & runtime register is placed at 0x1000 offset of UFSHCI
register statically with no spare space among four registers (48B):
UfsMcqSqReg, UfsMcqSqIntReg, UfsMcqCqReg, UfsMcqCqIntReg
The maxinum number of queue is 32 as per spec, and the default
MAC(Multiple Active Commands) are 32 in the device.
Example:
-device ufs,serial=foo,id=ufs0,mcq=true,mcq-maxq=8
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-3-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
This patch is a prep patch for the following MCQ support patch for
hw/ufs. This patch updated minimal mandatory fields to support MCQ
based on UFSHCI 4.0.
Signed-off-by: Minwoo Im <minwoo.im@samsung.com>
Reviewed-by: Jeuk Kim <jeuk20.kim@samsung.com>
Message-Id: <20240528023106.856777-2-minwoo.im@samsung.com>
Signed-off-by: Jeuk Kim <jeuk20.kim@samsung.com>
The TCGCPUOps::cpu_exec_halt method is called from cpu_handle_halt()
when the CPU is halted, so that a target CPU emulation can do
anything target-specific it needs to do. (At the moment we only use
this on i386.)
The current specification of the method doesn't allow the target
specific code to do something different if the CPU is about to come
out of the halt state, because cpu_handle_halt() only determines this
after the method has returned. (If the method called cpu_has_work()
itself this would introduce a potential race if an interrupt arrived
between the target's method implementation checking and
cpu_handle_halt() repeating the check.)
Change the definition of the method so that it returns a bool to
tell cpu_handle_halt() whether to stay in halt or not.
We will want this for the Arm target, where FEAT_WFxT wants to do
some work only for the case where the CPU is in halt but about to
leave it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240430140035.3889879-2-peter.maydell@linaro.org
Using -fsanitize=undefined with Clang v18 causes an error if function
pointers are casted:
qapi/qapi-clone-visitor.c:188:5: runtime error: call to function visit_type_SocketAddress through pointer to incorrect function type 'bool (*)(struct Visitor *, const char *, void **, struct Error **)'
/tmp/qemu-ubsan/qapi/qapi-visit-sockets.c:487: note: visit_type_SocketAddress defined here
#0 0x5642aa2f7f3b in qapi_clone qapi/qapi-clone-visitor.c:188:5
#1 0x5642aa2c8ce5 in qio_channel_socket_listen_async io/channel-socket.c:285:18
#2 0x5642aa2b8903 in test_io_channel_setup_async tests/unit/test-io-channel-socket.c:116:5
#3 0x5642aa2b8204 in test_io_channel tests/unit/test-io-channel-socket.c:179:9
#4 0x5642aa2b8129 in test_io_channel_ipv4 tests/unit/test-io-channel-socket.c:323:5
...
It also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
The problematic casts are necessary to pass visit_type_T() and
visit_type_T_members() as callbacks to qapi_clone() and qapi_clone_members(),
respectively. Open-code these two functions to avoid the callbacks, and
thus the type casts.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2346
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240524-xkb-v4-3-2de564e5c859@daynix.com>
[thuth: Improve commit message according to Markus' suggestions]
Signed-off-by: Thomas Huth <thuth@redhat.com>
-fsanitize=undefined complains if function pointers are casted. It
also prevents enabling the strict mode of CFI which is currently
disabled with -fsanitize-cfi-icall-generalize-pointers.
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/2345
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20240524-xkb-v4-2-2de564e5c859@daynix.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
It's not used anywhere, so let's simply remove it.
Message-ID: <20240527121351.211266-1-thuth@redhat.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Eric Farman <farman@linux.ibm.com>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Add a parameter that enables discard-after-copy. That is mostly useful
in "push backup with fleecing" scheme, when source is snapshot-access
format driver node, based on copy-before-write filter snapshot-access
API:
[guest] [snapshot-access] ~~ blockdev-backup ~~> [backup target]
| |
| root | file
v v
[copy-before-write]
| |
| file | target
v v
[active disk] [temp.img]
In this case discard-after-copy does two things:
- discard data in temp.img to save disk space
- avoid further copy-before-write operation in discarded area
Note that we have to declare WRITE permission on source in
copy-before-write filter, for discard to work. Still we can't take it
unconditionally, as it will break normal backup from RO source. So, we
have to add a parameter and pass it thorough bdrv_open flags.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Acked-by: Markus Armbruster <armbru@redhat.com>
Message-Id: <20240313152822.626493-5-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Currently block_copy creates copy_bitmap in source node. But that is in
bad relation with .independent_close=true of copy-before-write filter:
source node may be detached and removed before .bdrv_close() handler
called, which should call block_copy_state_free(), which in turn should
remove copy_bitmap.
That's all not ideal: it would be better if internal bitmap of
block-copy object is not attached to any node. But that is not possible
now.
The simplest solution is just create copy_bitmap in filter node, where
anyway two other bitmaps are created.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Reviewed-by: Fiona Ebner <f.ebner@proxmox.com>
Tested-by: Fiona Ebner <f.ebner@proxmox.com>
Message-Id: <20240313152822.626493-4-vsementsov@yandex-team.ru>
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240514105829.729342-4-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Konstantin Kostiuk <kkostiuk@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240513141703.549874-7-armbru@redhat.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
These are no longer used.
tlb_flush_all_cpus: removed by previous commit.
tlb_flush_page_all_cpus: removed by previous commit.
tlb_flush_page_bits_by_mmuidx_all_cpus: never used.
tlb_flush_page_by_mmuidx_all_cpus: never used.
tlb_flush_page_bits_by_mmuidx_all_cpus: never used, thus:
tlb_flush_range_by_mmuidx_all_cpus: never used.
tlb_flush_by_mmuidx_all_cpus: never used.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
