The upper 64-bit of the 128-bit registers have now a place inside
the cpu state structure, and are created as globals for future use.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-7-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Introduction of a gen_logic function for bitwise logic to implement
instructions in which no propagation of information occurs between bits and
use of this function on the bitwise instructions.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-6-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Given that the 128-bit version of the riscv spec adds new instructions, and
that some instructions that were previously only available in 64-bit mode
are now available for both 64-bit and 128-bit, we added new macros to check
for the processor mode during translation.
Although RV128 is a superset of RV64, we keep for now the RV64 only tests
for extensions other than RVI and RVM.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Co-authored-by: Fabien Portas <fabien.portas@grenoble-inp.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-5-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Renaming defines for quad in their various forms so that their signedness is
now explicit.
Done using git grep as suggested by Philippe, with a bit of hand edition to
keep assignments aligned.
Signed-off-by: Frédéric Pétrot <frederic.petrot@univ-grenoble-alpes.fr>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106210108.138226-2-frederic.petrot@univ-grenoble-alpes.fr
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
When commit 0643c12e4b dropped the 'x-' prefix for Zb[abcs] and set
them to be enabled by default, the comment about experimental
extensions was kept in place above them. This moves it down a few
lines to only cover experimental extensions.
References: 0643c12e4b ("target/riscv: Enable bitmanip Zb[abcs] instructions")
Signed-off-by: Philipp Tomsich <philipp.tomsich@vrull.eu>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20220106134020.1628889-1-philipp.tomsich@vrull.eu
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfncvt.f.xu.w, vfncvt.f.x.w convert double-width integer to single-width
floating-point. Therefore, should use require_rvf() to check whether
RVF/RVD is enabled.
vfncvt.f.f.w, vfncvt.rod.f.f.w convert double-width floating-point to
single-width integer. Therefore, should use require_scale_rvf() to check
whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-4-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
vfwcvt.xu.f.v, vfwcvt.x.f.v, vfwcvt.rtz.xu.f.v and vfwcvt.rtz.x.f.v
convert single-width floating-point to double-width integer.
Therefore, should use require_rvf() to check whether RVF/RVD is enabled.
vfwcvt.f.xu.v, vfwcvt.f.x.v convert single-width integer to double-width
floating-point, and vfwcvt.f.f.v convert double-width floating-point to
single-width floating-point. Therefore, should use require_scale_rvf() to
check whether RVF/RVD is enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-3-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector widening floating-point instructions should use
require_scale_rvf() instead of require_rvf() to check whether RVF/RVD is
enabled.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20220105022247.21131-2-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Let's enable the Hypervisor extension by default. This doesn't affect
named CPUs (such as lowrisc-ibex or sifive-u54) but does enable the
Hypervisor extensions by default for the virt machine.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-7-alistair.francis@opensource.wdc.com>
The Hypervisor spec is now frozen, so remove the experimental tag.
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Reviewed-by: Anup Patel <anup.patel@wdc.com>
Reviewed-by: Bin Meng <bmeng.cn@gmail.com>
Message-Id: <20220105213937.1113508-6-alistair.francis@opensource.wdc.com>
As per the privilege specification, any access from S/U mode should fail
if no pmp region is configured and pmp is present, othwerwise access
should succeed.
Fixes: d102f19a20 (target/riscv/pmp: Raise exception if no PMP entry is configured)
Signed-off-by: Nikita Shubin <n.shubin@yadro.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20211214092659.15709-1-nikita.shubin@maquefel.me
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Some of the instructions added by the FEAT_TLBIOS extension were forgotten
when the extension was originally added to QEMU.
Fixes: 7113d61850 ("target/arm: Add support for FEAT_TLBIOS")
Signed-off-by: Idan Horowitz <idan.horowitz@gmail.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20211231103928.1455657-1-idan.horowitz@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The first word of page1 is data, so the whole thing
can't be implemented with emulation of addresses.
Use init_guest_commpage for the allocation.
Hijack trap number 16 to implement cmpxchg.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
The real kernel has to load the instruction and extract
the imm5 field; for qemu, modify the translator to do this.
The use of R_AT for this in cpu_loop was a bug. Handle
the other trap numbers as per the kernel's trap_table.
Reviewed-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211221025012.1057923-2-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
The Linux kernel does not handle all memory operations: no
floating-point and no MAC.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-7-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-6-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
Leave TARGET_ALIGNED_ONLY set, but use the new CPUState
flag to set MO_UNALN for the instructions that the kernel
handles in the unaligned trap.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Laurent Vivier <laurent@vivier.eu>
Message-Id: <20211227150127.2659293-5-richard.henderson@linaro.org>
Signed-off-by: Laurent Vivier <laurent@vivier.eu>
MMCR0 writes will change only MMCR0 bits which are used to calculate
HFLAGS_PMCC0, HFLAGS_PMCC1 and HFLAGS_INSN_CNT hflags. No other machine
register will be changed during this operation. This means that
hreg_compute_hflags() is overkill for what we need to do.
pmu_update_summaries() is already updating HFLAGS_INSN_CNT without
calling hreg_compure_hflags(). Let's do the same for the other 2 MMCR0
hflags.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-5-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_cyc_cnt value in pmu_update_cycles
and pmc_update_overflow_timer. This leaves pmc_get_event
and pmc_is_inactive unused, so remove them.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-4-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Use the cached pmc_ins_cnt value. Unroll the loop over the
different PMC counters. Treat the PMC4 run-latch specially.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103224746.167831-3-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is the combination of frozen bit and counter type, on a per
counter basis. So far this is only used by HFLAGS_INSN_CNT, but
will be used more later.
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
[danielhb: fixed PMC4 cyc_cnt shift, insn run latch code,
MMCR0_FC handling, "PMC[1-6]" comment]
Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com>
Message-Id: <20220103224746.167831-2-danielhb413@gmail.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
We can just access it directly in powerpc_excp.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
[ clg: Took into account removal of inline ]
Message-Id: <20211229165751.3774248-6-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Now that 'vector' is known before calling the interrupt-specific setup
code, we can move all of the scv setup into one place.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211229165751.3774248-5-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
None of the interrupt setup code touches 'vector', so we can move it
earlier in the function. This will allow us to later move the System
Call Vectored setup that is on the top level into the
POWERPC_EXCP_SYSCALL_VECTORED code block.
This patch also moves the verification for when 'excp' does not have
an address associated with it. We now bail a little earlier when that
is the case. This should not cause any visible effects.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-4-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The next patch will start accessing the excp_vectors array earlier in
the function, so add a bounds check as first thing here.
This converts the empty return on POWERPC_EXCP_NONE to an error. This
exception number never reaches this function and if it does it
probably means something else went wrong up the line.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-3-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There are currently only two interrupts that use alternate SRRs, so
let them write to them directly during the setup code.
No functional change intended.
Signed-off-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Message-Id: <20211229165751.3774248-2-farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The non-signalling versions of VSX scalar convert to shorter/longer
precision insns doesn't silence SNaNs in the hardware. To better match
this behavior, use the non-arithmatic conversion of helper_todouble
instead of float32_to_float64. A test is added to prevent future
regressions.
Signed-off-by: Matheus Ferst <matheus.ferst@eldorado.org.br>
Message-Id: <20211228120310.1957990-1-matheus.ferst@eldorado.org.br>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Rework slightly ppc_cpu_dump_state() to replace the various 'if'
statements with a 'switch'.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-10-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The PID SPR of the 405 CPU contains the translation ID of the TLB
which is a 8-bit field. Enforce the mask with a store helper.
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-8-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-9-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The 405 timers were broken when booke support was added. Assumption
was made that the register numbers were the same but it's not :
SPR_BOOKE_TSR (0x150)
SPR_BOOKE_TCR (0x154)
SPR_40x_TSR (0x3D8)
SPR_40x_TCR (0x3DA)
Cc: Christophe Leroy <christophe.leroy@c-s.fr>
Fixes: ddd1055b07 ("PPC: booke timers")
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-6-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
There is no need to deactivate MMU logging at compile time. Remove all
use of defines. Only keep DUMP_PAGE_TABLES for another series since
page tables could be dumped from the monitor.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20211222064025.1541490-4-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-5-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
It facilitates reading the logs when mask CPU_LOG_INT is activated. We
should do the same for error codes.
Cc: Fabiano Rosas <farosas@linux.ibm.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Fabiano Rosas <farosas@linux.ibm.com>
Reviewed-by: David Gibson <david@gibson.dropbear.id.au>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20211222064025.1541490-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Message-Id: <20220103063441.3424853-3-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The compiler should know better how to inline code if necessary.
Suggested-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-Id: <20220103063441.3424853-2-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
For Radix translation, the EA range is 64-bits. when EA(2:11) are
nonzero, a segment interrupt should occur.
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Frederic Barrat <fbarrat@linux.ibm.com>
Message-Id: <20211231073122.3183583-1-clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
The parallel version of STBY did not take host endianness into
account, and also computed the incorrect address for STBY_E.
Bswap twice to handle the merge and store. Compute mask inside
the function rather than as a parameter. Force align the address,
rather than subtracting one.
Generalize the function to system mode by using probe_access().
Cc: qemu-stable@nongnu.org
Tested-by: Helge Deller <deller@gmx.de>
Reported-by: Helge Deller <deller@gmx.de>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Because sa may be 0,
tcg_gen_deposit_reg(dest, t0, cpu_gr[a->r1], 32 - sa, sa);
may attempt a zero-width deposit at bit 32, which will assert
for TARGET_REGISTER_BITS == 32.
Use the newer extract2 when possible, which itself includes the
rotri special case; otherwise mirror the code from trans_shrpw_sar,
using concat and shri.
Cc: qemu-stable@nongnu.org
Resolves: https://gitlab.com/qemu-project/qemu/-/issues/635
Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The bitmanip extension has now been ratified [1] and upstream tooling
(gcc/binutils) support it too, so move them out of experimental and also
enable by default (for better test exposure/coverage)
[1] https://wiki.riscv.org/display/TECH/Recently+Ratified+Extensions
Signed-off-by: Vineet Gupta <vineetg@rivosinc.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211216051844.3921088-1-vineetg@rivosinc.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
SEW has the limitation which cannot exceed ELEN.
Widening instructions have a destination group with EEW = 2*SEW
and narrowing instructions have a source operand with EEW = 2*SEW.
Both of the instructions have the limitation of: 2*SEW <= ELEN.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-78-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Vector Integer Add-with-Carry / Subtract-with-Borrow Instructions is
moved to Section 11.4 in RVV v1.0 spec. Update the comment, no
functional changes.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-77-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-76-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-75-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Add supports of Vector unit-stride mask load/store instructions
(vlm.v, vsm.v), which has:
evl (effective vector length) = ceil(env->vl / 8).
The new instructions operate the same as unmasked byte loads and stores.
Add evl parameter to reuse vext_ldst_us().
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-74-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-73-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Rename r2_zimm to r2_zimm11 for the upcoming vsetivli instruction.
vsetivli has 10-bits of zimm but vsetvli has 11-bits of zimm.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-72-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement the floating-point reciprocal estimate to 7 bits instruction.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-71-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Implement the floating-point reciprocal square-root estimate to 7 bits
instruction.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-70-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Hsiangkai Wang <kai.wang@sifive.com>
Signed-off-by: Greentime Hu <greentime.hu@sifive.com>
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-69-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
If the frm field contains an invalid rounding mode (101-111),
attempting to execute any vector floating-point instruction, even
those that do not depend on the rounding mode, will raise an illegal
instruction exception.
Call gen_set_rm() with DYN rounding mode to check and trigger illegal
instruction exception if frm field contains invalid value at run-time
for vector floating-point instructions.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-68-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
* Update and check vstart value for vector instructions.
* Add whole register move instruction helper functions as we have to
call helper function for case where vstart is not zero.
* Remove probe_pages() calls in vector load/store instructions
(except fault-only-first loads) to raise the memory access exception
at the exact processed vector element.
Signed-off-by: Frank Chang <frank.chang@sifive.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-Id: <20211210075704.23951-67-frank.chang@sifive.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
