The upcoming syscall catchpoint support needs to get control on syscall
entry and return. Provide the necessary hooks for that, which are
no-ops for now.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-4-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-13-alex.bennee@linaro.org>
The upcoming syscall catchpoint support needs to send stop packets with
an associated reason to GDB. Add an extra parameter to gdb_handlesig()
for that, and rename it to gdb_handlesig_reason(). Provide a
compatibility wrapper with an old name.
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Message-Id: <20240202152506.279476-3-iii@linux.ibm.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-12-alex.bennee@linaro.org>
This regressed qemu-system-xtensa:
TEST test_load_store on xtensa
qemu-system-xtensa: Some ROM regions are overlapping
These ROM regions might have been loaded by direct user request or by default.
They could be BIOS/firmware images, a guest kernel, initrd or some other file loaded into guest memory.
Check whether you intended to load all this guest code, and whether it has been built to load to the correct addresses.
The following two regions overlap (in the memory address space):
test_load_store ELF program header segment 1 (addresses 0x0000000000001000 - 0x0000000000001f26)
test_load_store ELF program header segment 2 (addresses 0x0000000000001ab8 - 0x0000000000001ab8)
make[1]: *** [Makefile:187: run-test_load_store] Error 1
This reverts commit 62570f1434.
Reviewed-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Message-Id: <20240207163812.3231697-5-alex.bennee@linaro.org>
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
-----BEGIN PGP SIGNATURE-----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=yuRM
-----END PGP SIGNATURE-----
Merge tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu into staging
RISC-V PR for 9.0
* Check for 'A' extension on all atomic instructions
* Add support for 'B' extension
* Internally deprecate riscv_cpu_options
* Implement optional CSR mcontext of debug Sdtrig extension
* Internally add cpu->cfg.vlenb and remove cpu->cfg.vlen
* Support vlenb and vregs[] in KVM
* RISC-V gdbstub and TCG plugin improvements
* Remove vxrm and vxsat from FCSR
* Use RISCVException as return type for all csr ops
* Use g_autofree more and fix a memory leak
* Add support for Zaamo and Zalrsc
* Support new isa extension detection devicetree properties
* SMBIOS support for RISC-V virt machine
* Enable xtheadsync under user mode
* Add rv32i,rv32e and rv64e CPUs
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEaukCtqfKh31tZZKWr3yVEwxTgBMFAmXGBRAACgkQr3yVEwxT
# gBPqVA//etMiwP8+lQb2E4pw+QwBIzpm3qFyBlqgSCFrekj1u2kYNd4CH3CKurWE
# ysoQ6OAMeb0MUbRHdjrejjzD/wOg7JNA9h7ynM1VbupveBrJY3GWC6qQWSG+A1j/
# LSgmr/dDya74chDxjxa+7ld3xqloHi5OtdGaeORfdPXl7mjCCKKCoSKYCex1ykup
# uuB7bsjeWeWEbuUsntmeuHJLZJuhpnbuZJmp17tEo+3vWXqjxV00Lik+XMwh3gua
# KOLiAqHjGr2NEhA3Mg1JLcQ+6JLTDM9ugZpQeNGQwMkfuB/RAU7jO/1Di3flbadF
# 8l2xOHu3mydDbfdxTGZNJjcIrMTX/YEewAYZLRYpNsyPOMntgq8HEegwCdWGvK7C
# M5Tc59MNSuBt+zkZkHd21qLYusa2ThP4YT/schh7IA+2F1TSKdhlptEzi2oebIc7
# ilLSgZ9Of72QlAH2OPJNSAL9Nbc06MHEM0JiHIJa5u+XdcVRhZus5h1YIOKXisqF
# YPP22RnI5Jj5d5csa/0ONAZGFh5SRMTJtpjKoKSkzoYJWDjCQ2MiUAOmLscchMZd
# wbK0vjeRf6kRG4U4z7nTmHS9kzH8RXUZDecVcOITuMpKih9LhUiCZ+xPunFYPycJ
# WNFa9/pENcCXJweXvtk4NHwx933rX56678lF6KY2hwUwwaiBOv4=
# =yuRM
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 09 Feb 2024 10:57:20 GMT
# gpg: using RSA key 6AE902B6A7CA877D6D659296AF7C95130C538013
# gpg: Good signature from "Alistair Francis <alistair@alistair23.me>" [unknown]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: 6AE9 02B6 A7CA 877D 6D65 9296 AF7C 9513 0C53 8013
* tag 'pull-riscv-to-apply-20240209' of https://github.com/alistair23/qemu: (61 commits)
target/riscv: add rv32i, rv32e and rv64e CPUs
target/riscv/cpu.c: add riscv_bare_cpu_init()
target/riscv: Enable xtheadsync under user mode
qemu-options: enable -smbios option on RISC-V
target/riscv: SMBIOS support for RISC-V virt machine
smbios: function to set default processor family
smbios: add processor-family option
target/riscv: support new isa extension detection devicetree properties
target/riscv: use misa_mxl_max to populate isa string rather than TARGET_LONG_BITS
target/riscv: Expose Zaamo and Zalrsc extensions
target/riscv: Check 'A' and split extensions for atomic instructions
target/riscv: Add Zaamo and Zalrsc extension infrastructure
hw/riscv/virt.c: use g_autofree in create_fdt_*
hw/riscv/virt.c: use g_autofree in virt_machine_init()
hw/riscv/virt.c: use g_autofree in create_fdt_virtio()
hw/riscv/virt.c: use g_autofree in create_fdt_sockets()
hw/riscv/virt.c: use g_autofree in create_fdt_socket_cpus()
hw/riscv/numa.c: use g_autofree in socket_fdt_write_distance_matrix()
hw/riscv/virt-acpi-build.c: fix leak in build_rhct()
target/riscv: Use RISCVException as return type for all csr ops
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Expand the signature of qcrypto_block_create to enable the
formation of LUKS volumes with detachable headers. To accomplish
that, introduce QCryptoBlockCreateFlags to instruct the creation
process to set the payload_offset_sector to 0.
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
By enhancing the LUKS driver, it is possible to implement
the LUKS volume with a detached header.
Normally a LUKS volume has a layout:
disk: | header | key material | disk payload data |
With a detached LUKS header, you need 2 disks so getting:
disk1: | header | key material |
disk2: | disk payload data |
There are a variety of benefits to doing this:
* Secrecy - the disk2 cannot be identified as containing LUKS
volume since there's no header
* Control - if access to the disk1 is restricted, then even
if someone has access to disk2 they can't unlock
it. Might be useful if you have disks on NFS but
want to restrict which host can launch a VM
instance from it, by dynamically providing access
to the header to a designated host
* Flexibility - your application data volume may be a given
size and it is inconvenient to resize it to
add encryption.You can store the LUKS header
separately and use the existing storage
volume for payload
* Recovery - corruption of a bit in the header may make the
entire payload inaccessible. It might be
convenient to take backups of the header. If
your primary disk header becomes corrupt, you
can unlock the data still by pointing to the
backup detached header
Take the raw-format image as an example to introduce the usage
of the LUKS volume with a detached header:
1. prepare detached LUKS header images
$ dd if=/dev/zero of=test-header.img bs=1M count=32
$ dd if=/dev/zero of=test-payload.img bs=1M count=1000
$ cryptsetup luksFormat --header test-header.img test-payload.img
> --force-password --type luks1
2. block-add a protocol blockdev node of payload image
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-storage", "driver":"file",
> "filename":"test-payload.img"}}'
3. block-add a protocol blockdev node of LUKS header as above.
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-storage", "driver":"file",
> "filename": "test-header.img" }}'
4. object-add the secret for decrypting the cipher stored in
LUKS header above
$ virsh qemu-monitor-command vm '{"execute":"object-add",
> "arguments":{"qom-type":"secret", "id":
> "libvirt-2-storage-secret0", "data":"abc123"}}'
5. block-add the raw-drived blockdev format node
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-1-format", "driver":"raw",
> "file":"libvirt-1-storage"}}'
6. block-add the luks-drived blockdev to link the raw disk
with the LUKS header by specifying the field "header"
$ virsh qemu-monitor-command vm '{"execute":"blockdev-add",
> "arguments":{"node-name":"libvirt-2-format", "driver":"luks",
> "file":"libvirt-1-format", "header":"libvirt-2-storage",
> "key-secret":"libvirt-2-format-secret0"}}'
7. hot-plug the virtio-blk device finally
$ virsh qemu-monitor-command vm '{"execute":"device_add",
> "arguments": {"num-queues":"1", "driver":"virtio-blk-pci",
> "drive": "libvirt-2-format", "id":"virtio-disk2"}}'
Starting a VM with a LUKS volume with detached header is
somewhat similar to hot-plug in that both maintaining the
same json command while the starting VM changes the
"blockdev-add/device_add" parameters to "blockdev/device".
Signed-off-by: Hyman Huang <yong.huang@smartx.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
In many configurations, e.g. multiple vNICs with multiple queues or
with many Ceph OSDs, the default soft limit of 1024 is not enough.
QEMU is supposed to work fine with file descriptors >= 1024 and does
not use select() on POSIX. Bump the soft limit to the allowed hard
limit to avoid issues with the aforementioned configurations.
Of course the limit could be raised from the outside, but the man page
of systemd.exec states about 'LimitNOFILE=':
> Don't use.
> [...]
> Typically applications should increase their soft limit to the hard
> limit on their own, if they are OK with working with file
> descriptors above 1023,
If the soft limit is already the same as the hard limit, avoid the
superfluous setrlimit call. This can avoid a warning with a strict
seccomp filter blocking setrlimit if NOFILE was already raised before
executing QEMU.
Buglink: https://bugzilla.proxmox.com/show_bug.cgi?id=4507
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Signed-off-by: Fiona Ebner <f.ebner@proxmox.com>
Signed-off-by: Daniel P. Berrangé <berrange@redhat.com>
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
-----BEGIN PGP SIGNATURE-----
iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
=k53l
-----END PGP SIGNATURE-----
Merge tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu into staging
Migration pull
- William's fix on hwpoison migration which used to crash QEMU
- Peter's multifd cleanup + bugfix + optimizations
- Avihai's fix on multifd crash over non-socket channels
- Fabiano's multifd thread-race fix
- Peter's CI fix series
# -----BEGIN PGP SIGNATURE-----
#
# iIgEABYKADAWIQS5GE3CDMRX2s990ak7X8zN86vXBgUCZcREtRIccGV0ZXJ4QHJl
# ZGhhdC5jb20ACgkQO1/MzfOr1wacrwEAl2aeQkh51h/e+OKX7MG4/4Y6Edf6Oz7o
# IJLk/cyrUFQA/2exo2lOdv5zHNOJKwAYj8HYDraezrC/MK1eED4Wji0M
# =k53l
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 08 Feb 2024 03:04:21 GMT
# gpg: using EDDSA key B9184DC20CC457DACF7DD1A93B5FCCCDF3ABD706
# gpg: issuer "peterx@redhat.com"
# gpg: Good signature from "Peter Xu <xzpeter@gmail.com>" [marginal]
# gpg: aka "Peter Xu <peterx@redhat.com>" [marginal]
# gpg: WARNING: This key is not certified with sufficiently trusted signatures!
# gpg: It is not certain that the signature belongs to the owner.
# Primary key fingerprint: B918 4DC2 0CC4 57DA CF7D D1A9 3B5F CCCD F3AB D706
* tag 'migration-staging-pull-request' of https://gitlab.com/peterx/qemu: (34 commits)
ci: Update comment for migration-compat-aarch64
ci: Remove tag dependency for build-previous-qemu
tests/migration-test: Stick with gicv3 in aarch64 test
migration/multifd: Add a synchronization point for channel creation
migration/multifd: Unify multifd and TLS connection paths
migration/multifd: Move multifd_send_setup into migration thread
migration/multifd: Move multifd_send_setup error handling in to the function
migration/multifd: Remove p->running
migration/multifd: Join the TLS thread
migration: Fix logic of channels and transport compatibility check
migration/multifd: Optimize sender side to be lockless
migration/multifd: Fix MultiFDSendParams.packet_num race
migration/multifd: Stick with send/recv on function names
migration/multifd: Cleanup multifd_load_cleanup()
migration/multifd: Cleanup multifd_save_cleanup()
migration/multifd: Rewrite multifd_queue_page()
migration/multifd: Change retval of multifd_send_pages()
migration/multifd: Change retval of multifd_queue_page()
migration/multifd: Split multifd_send_terminate_threads()
migration/multifd: Forbid spurious wakeups
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Provide a function to set the default processor family.
Signed-off-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Message-ID: <20240123184229.10415-3-heinrich.schuchardt@canonical.com>
Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
-----BEGIN PGP SIGNATURE-----
iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
/mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
c6RLQQ==
=TMiE
-----END PGP SIGNATURE-----
Merge tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu into staging
tcg: Introduce TCG_COND_TST{EQ,NE}
target/alpha: Use TCG_COND_TST{EQ,NE}
target/m68k: Use TCG_COND_TST{EQ,NE} in gen_fcc_cond
target/sparc: Use TCG_COND_TSTEQ in gen_op_mulscc
target/s390x: Use TCG_COND_TSTNE for CC_OP_{TM,ICM}
target/s390x: Improve general case of disas_jcc
# -----BEGIN PGP SIGNATURE-----
#
# iQFRBAABCgA7FiEEekgeeIaLTbaoWgXAZN846K9+IV8FAmXBpTAdHHJpY2hhcmQu
# aGVuZGVyc29uQGxpbmFyby5vcmcACgkQZN846K9+IV/p6gf9HAasTSRECk2cvjW9
# /mcJy0AIaespnI50fG8fm48OoFl0847CdrsJycpZ1spw3W3Wb0cVbMbq/teNMjXZ
# 0SGQJFk9Baq7wMhW7VzhSzJ96pcorpQprp7XBMdheLXqpT4zsM/EuwEAepBk8RUG
# 3kCeo38dswXE681ZafZkd/8pPzII19sQK8eiMpceeYkBsbbep+DDcnE18Ee4kISS
# u0SbuslKVahxd86LKuzrcz0pNFcmFuR5jRP9hmbQ0MfeAn0Pxlndi+ayZNghfgPf
# 3hDjskiionFwxb/OoRj45BssTWfDiluWl7IUsHfegPXCQ2Y+woT5Vq6TVGZn0GqS
# c6RLQQ==
# =TMiE
# -----END PGP SIGNATURE-----
# gpg: Signature made Tue 06 Feb 2024 03:19:12 GMT
# gpg: using RSA key 7A481E78868B4DB6A85A05C064DF38E8AF7E215F
# gpg: issuer "richard.henderson@linaro.org"
# gpg: Good signature from "Richard Henderson <richard.henderson@linaro.org>" [full]
# Primary key fingerprint: 7A48 1E78 868B 4DB6 A85A 05C0 64DF 38E8 AF7E 215F
* tag 'pull-tcg-20240205-2' of https://gitlab.com/rth7680/qemu: (39 commits)
tcg/tci: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Support TCG_COND_TST{EQ,NE}
tcg/s390x: Add TCG_CT_CONST_CMP
tcg/s390x: Split constraint A into J+U
tcg/ppc: Support TCG_COND_TST{EQ,NE}
tcg/ppc: Add TCG_CT_CONST_CMP
tcg/ppc: Tidy up tcg_target_const_match
tcg/ppc: Use cr0 in tcg_to_bc and tcg_to_isel
tcg/ppc: Sink tcg_to_bc usage into tcg_out_bc
tcg/sparc64: Support TCG_COND_TST{EQ,NE}
tcg/sparc64: Pass TCGCond to tcg_out_cmp
tcg/sparc64: Hoist read of tcg_cond_to_rcond
tcg/i386: Use TEST r,r to test 8/16/32 bits
tcg/i386: Improve TSTNE/TESTEQ vs powers of two
tcg/i386: Support TCG_COND_TST{EQ,NE}
tcg/i386: Move tcg_cond_to_jcc[] into tcg_out_cmp
tcg/i386: Pass x86 condition codes to tcg_out_cmov
tcg/arm: Support TCG_COND_TST{EQ,NE}
tcg/arm: Split out tcg_out_cmp()
tcg/aarch64: Generate CBNZ for TSTNE of UINT32_MAX
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
During drain, we do not care about virtqueue notifications, which is why
we remove the handlers on it. When removing those handlers, whether vq
notifications are enabled or not depends on whether we were in polling
mode or not; if not, they are enabled (by default); if so, they have
been disabled by the io_poll_start callback.
Because we do not care about those notifications after removing the
handlers, this is fine. However, we have to explicitly ensure they are
enabled when re-attaching the handlers, so we will resume receiving
notifications. We do this in virtio_queue_aio_attach_host_notifier*().
If such a function is called while we are in a polling section,
attaching the notifiers will then invoke the io_poll_start callback,
re-disabling notifications.
Because we will always miss virtqueue updates in the drained section, we
also need to poll the virtqueue once after attaching the notifiers.
Buglink: https://issues.redhat.com/browse/RHEL-3934
Signed-off-by: Hanna Czenczek <hreitz@redhat.com>
Message-ID: <20240202153158.788922-3-hreitz@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
usb-storage is for the most part just a wrapper around an internally
created scsi-disk device. It uses DEFINE_BLOCK_PROPERTIES() to offer all
of the usual block device properties to the user, but then only forwards
a few select properties to the internal device while the rest is
silently ignored.
This changes scsi_bus_legacy_add_drive() to accept a whole BlockConf
instead of some individual values inside of it so that usb-storage can
now pass the whole configuration to the internal scsi-disk. This enables
the remaining block device properties, e.g. logical/physical_block_size
or discard_granularity.
Buglink: https://issues.redhat.com/browse/RHEL-22375
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Message-ID: <20240131130607.24117-1-kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The VirtIOBlock::rq field has had the type void * since its introduction
in commit 869a5c6df1 ("Stop VM on error in virtio-blk. (Gleb
Natapov)").
Perhaps this was done to avoid the forward declaration of
VirtIOBlockReq.
Hanna Czenczek <hreitz@redhat.com> pointed out the missing type. Specify
the actual type because there is no need to use void * here.
Suggested-by: Hanna Czenczek <hreitz@redhat.com>
Reviewed-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Reviewed-by: Hanna Czenczek <hreitz@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240206190610.107963-5-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
QEMU initializes preallocated backend memory as the objects are parsed from
the command line. This is not optimal in some cases (e.g. memory spanning
multiple NUMA nodes) because the memory objects are initialized in series.
Allow the initialization to occur in parallel (asynchronously). In order to
ensure optimal thread placement, asynchronous initialization requires prealloc
context threads to be in use.
Signed-off-by: Mark Kanda <mark.kanda@oracle.com>
Message-ID: <20240131165327.3154970-2-mark.kanda@oracle.com>
Tested-by: Mario Casquero <mcasquer@redhat.com>
Signed-off-by: David Hildenbrand <david@redhat.com>
A memory page poisoned from the hypervisor level is no longer readable.
The migration of a VM will crash Qemu when it tries to read the
memory address space and stumbles on the poisoned page with a similar
stack trace:
Program terminated with signal SIGBUS, Bus error.
#0 _mm256_loadu_si256
#1 buffer_zero_avx2
#2 select_accel_fn
#3 buffer_is_zero
#4 save_zero_page
#5 ram_save_target_page_legacy
#6 ram_save_host_page
#7 ram_find_and_save_block
#8 ram_save_iterate
#9 qemu_savevm_state_iterate
#10 migration_iteration_run
#11 migration_thread
#12 qemu_thread_start
To avoid this VM crash during the migration, prevent the migration
when a known hardware poison exists on the VM.
Signed-off-by: William Roche <william.roche@oracle.com>
Link: https://lore.kernel.org/r/20240130190640.139364-2-william.roche@oracle.com
Signed-off-by: Peter Xu <peterx@redhat.com>
Add the enumerators, adjust the helpers to match, and dump.
Not supported anywhere else just yet.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
For user-only mode, use MMU_USER_IDX.
For system mode, use CPUClass.mmu_index.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
To be used after all targets have populated the hook.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Also remove the stale declaration of host_net_devices; the actual
definition was removed long ago in commit 7cc28cb061 ("net: Remove
the deprecated 'host_net_add' and 'host_net_remove' HMP commands")
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
These old functions can be removed now too. Let net_param_nic() print
the full set of network devices directly, and also make it note that a
list more specific to this platform/config will be available by using
'-nic model=help' instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This function is no longer used, as all its callers have been converted
to use pci_init_nic_devices() instead.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
There are no callers of this function any more, as they have all been
converted to qemu_{create,configure}_nic_device().
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Create the device only if there is a corresponding NIC config for it.
Remove the explicit check on nd_table[0].used from hw/hppa/machine.c
which (since commit d8a3220005) tries to do the same thing.
The lasi_82596 support has been disabled since it was first introduced,
since enable_lasi_lan() has always been zero. This allows the user to
enable it by explicitly requesting a NIC model 'lasi_82596' or just
using the alias 'lasi'. Otherwise, it defaults to a PCI NIC as before.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preseve the existing behaviour for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Some callers instantiate the device unconditionally, others will do so only
if there is a NICInfo to go with it. This appears to be fairly random, but
preserve the existing behaviour of each caller for now.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Thomas Huth <thuth@redhat.com>
When instantiating XenBus itself, for each NIC which is configured with
either the model unspecified, or set to to "xen" or "xen-net-device",
create a corresponding xen-net-device for it.
Now we can revert the previous more hackish version which relied on the
platform code explicitly registering the NICs on its own XenBus, having
returned the BusState* from xen_bus_init() itself.
This also fixes the setup for Xen PV guests, which was previously broken
in various ways and never actually managed to peer with the netdev.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Eliminate direct access to nd_table[] and nb_nics by processing the the
Xen and ISA NICs first and then calling pci_init_nic_devices() for the
rest.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
The loop over nd_table[] to add PCI NICs is repeated in quite a few
places. Add a helper function to do it.
Some platforms also try to instantiate a specific model in a specific
slot, to match the real hardware. Add pci_init_nic_in_slot() for that
purpose.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
This will instantiate any NICs which live on a given bus type. Each bus
is allowed *one* substitution (for PCI it's virtio → virtio-net-pci, for
Xen it's xen → xen-net-device; no point in overengineering it unless we
actually want more).
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Most code which directly accesses nd_table[] and nb_nics uses them for
one of two things. Either "I have created a NIC device and I'd like a
configuration for it", or "I will create a NIC device *if* there is a
configuration for it". With some variants on the theme around whether
they actually *check* if the model specified in the configuration is
the right one.
Provide functions which perform both of those, allowing platforms to
be a little more consistent and as a step towards making nd_table[]
and nb_nics private to the net code.
One might argue that platforms ought to be consistent about whether
they create the unconfigured devices or not, but making significant
user-visible changes is explicitly *not* the intent right now.
The new functions leave the 'model' field of the NICInfo as NULL after
using it for the default NIC model, unlike the qemu_check_nic_model()
function which does set nd->model to match default_model explicitly.
This is acceptable because there is no code which consumes nd->model
except this NIC-matching code in net/net.c, and no reasonable excuse
for any code wanting to use nd->model in future.
Also export the qemu_find_nic_info() helper, as some platforms have
special cases they need to handle.
Signed-off-by: David Woodhouse <dwmw@amazon.co.uk>
Reviewed-by: Paul Durrant <paul@xen.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
This patch will allow the SPI controller to be accessible from BCM2835 based
boards as SPI0. SPI driver is usually disabled by default and config.txt does
not work.
Instead, dtmerge can be used to apply spi=on on a bcm2835 dtb file.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240129221807.2983148-3-rayhan.faizel@gmail.com
[PMM: indent tweak]
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch adds the SPI controller for the BCM2835. Polling and interrupt modes
of transfer are supported. DMA and LoSSI modes are currently unimplemented.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240129221807.2983148-2-rayhan.faizel@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patch implements the basic registers of GMAC device and sets
registers for networking functionalities.
Squashed IRQ Implementation patch into this one for compliation.
Tested:
The following message shows up with the change:
Broadcom BCM54612E stmmac-0:00: attached PHY driver [Broadcom BCM54612E] (mii_bus:phy_addr=stmmac-0:00, irq=POLL)
stmmaceth f0802000.eth eth0: Link is Up - 1Gbps/Full - flow control rx/tx
Change-Id: If71c6d486b95edcccba109ba454870714d7e0940
Signed-off-by: Hao Wu <wuhaotsh@google.com>
Signed-off-by: Nabih Estefan Diaz <nabihestefan@google.com>
Reviewed-by: Tyrone Ting <kfting@nuvoton.com>
Message-id: 20240131002800.989285-2-nabihestefan@google.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The M2Sxxx SoC family can only be used with Cortex-M3.
Propagating the CPU type from the board level is pointless.
Hard-code the CPU type at the SoC level.
Remove the now ignored MachineClass::default_cpu_type field.
Use the common code introduced in commit c9cf636d48 ("machine: Add
a valid_cpu_types property") to check for valid CPU type at the
board level.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240129151828.59544-6-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
BusClass currently has transitional infrastructure to support
subclasses which implement the legacy BusClass::reset method rather
than the Resettable interface. We have now removed all the users of
BusClass::reset in the tree, so we can remove the transitional
infrastructure.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Cédric Le Goater <clg@redhat.com>
Acked-by: Maciej S. Szmigiero <maciej.szmigiero@oracle.com>
Tested-by: Cédric Le Goater <clg@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Message-id: 20240119163512.3810301-6-peter.maydell@linaro.org
* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge
-----BEGIN PGP SIGNATURE-----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=0C5S
-----END PGP SIGNATURE-----
Merge tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu into staging
aspeed queue:
* Update of buildroot images to 2023.11 (6.6.3 kernel)
* Check of the valid CPU type supported by aspeed machines
* Simplified models for the IBM's FSI bus and the Aspeed
controller bridge
# -----BEGIN PGP SIGNATURE-----
#
# iQIzBAABCAAdFiEEoPZlSPBIlev+awtgUaNDx8/77KEFAmW7Sa8ACgkQUaNDx8/7
# 7KG7mw/8DbMJY6aqgq5YANszzem1ktJphPCNxq081cbczCOUpCNX4aL+0/ANvxxD
# lbJQB+SZeIRmuFbxYPhq68rtzB4vG7tsQpns4H33EPKT4vuzF70lq4fgptMiun3q
# 1ZJ2LF3jonvQWdhbC17wzAQz0FFb4F7XOxz++UL4okPsgzsYItnd+TWs8q7+erRb
# 84UwN+eBTBAl/FiNk679/tBTqAfCVGgQ7dzotr4f3tg5POvrGOrlEjAn0O+dGGDj
# wgILmpEBsTsilRB1tz8Kw0j/v/VkHz1DJu45lRAV9CIrN22iKcjMilNGgNDT8kcI
# yAlxAw3iN+hVFqDov8wFPjDYd/Qw2oRAPy2Kd14hW9xL8zBOTms1JK5L0PS2+Feo
# ZjMJ2cOJq3t4Wt1ZXRhgHfF4ANwP0OZ/y9bHCy3CkBljEeiTQbikHP9gVV4qHXZH
# 4Q0HnDZQwAgobw3CmZ8jVx1dQueqy3ycuvkhCyv3S0l/tdbtXDtr5pNNu3dAP/PJ
# 3nifLdRImhDvxxO9GKaCdUVLzELzMJl0GrgAsVJPKVnKHA4IiVKmB+XcW9IUbfy/
# 3zA2wHJLrEF+MF6MsuNcEYCCqUvyNLm7rUrXk1wNLXpCJ35bbW5IYy7Ty/8E2GHb
# D5Cv/EPNhMBiNA4+HqQlMOTC13Ozv2qwCuWYCh2Ik8mnzaEiyTo=
# =0C5S
# -----END PGP SIGNATURE-----
# gpg: Signature made Thu 01 Feb 2024 07:35:11 GMT
# gpg: using RSA key A0F66548F04895EBFE6B0B6051A343C7CFFBECA1
# gpg: Good signature from "Cédric Le Goater <clg@kaod.org>" [undefined]
# gpg: WARNING: This key is not certified with a trusted signature!
# gpg: There is no indication that the signature belongs to the owner.
# Primary key fingerprint: A0F6 6548 F048 95EB FE6B 0B60 51A3 43C7 CFFB ECA1
* tag 'pull-aspeed-20240201' of https://github.com/legoater/qemu:
hw/fsi: Update MAINTAINER list
hw/fsi: Added FSI documentation
hw/fsi: Added qtest
hw/arm: Hook up FSI module in AST2600
hw/fsi: Aspeed APB2OPB & On-chip peripheral bus
hw/fsi: Introduce IBM's FSI master
hw/fsi: Introduce IBM's cfam
hw/fsi: Introduce IBM's fsi-slave model
hw/fsi: Introduce IBM's FSI Bus
hw/fsi: Introduce IBM's scratchpad device
hw/fsi: Introduce IBM's Local bus
hw/arm/aspeed: Check for CPU types in machine_run_board_init()
hw/arm/aspeed: Introduce aspeed_soc_cpu_type() helper
hw/arm/aspeed: Init CPU defaults in a common helper
hw/arm/aspeed: Set default CPU count using aspeed_soc_num_cpus()
hw/arm/aspeed: Remove dead code
tests/avocado/machine_aspeed.py: Update buildroot images to 2023.11
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This patchset introduces IBM's Flexible Service Interface(FSI).
Time for some fun with inter-processor buses. FSI allows a service
processor access to the internal buses of a host POWER processor to
perform configuration or debugging.
FSI has long existed in POWER processes and so comes with some baggage,
including how it has been integrated into the ASPEED SoC.
Working backwards from the POWER processor, the fundamental pieces of
interest for the implementation are:
1. The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on buses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.
2. The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.
3. The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.
4. The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
5. An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The implementation appears as following in the qemu device tree:
(qemu) info qtree
bus: main-system-bus
type System
...
dev: aspeed.apb2opb, id ""
gpio-out "sysbus-irq" 1
mmio 000000001e79b000/0000000000001000
bus: opb.1
type opb
dev: fsi.master, id ""
bus: fsi.bus.1
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: fsi.lbus.1
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
bus: opb.0
type opb
dev: fsi.master, id ""
bus: fsi.bus.0
type fsi.bus
dev: cfam.config, id ""
dev: cfam, id ""
bus: fsi.lbus.0
type lbus
dev: scratchpad, id ""
address = 0 (0x0)
The LBUS is modelled to maintain the qdev bus hierarchy and to take
advantage of the object model to automatically generate the CFAM
configuration block. The configuration block presents engines in the
order they are attached to the CFAM's LBUS. Engine implementations
should subclass the LBusDevice and set the 'config' member of
LBusDeviceClass to match the engine's type.
CFAM designs offer a lot of flexibility, for instance it is possible for
a CFAM to be simultaneously driven from multiple FSI links. The modeling
is not so complete; it's assumed that each CFAM is attached to a single
FSI slave (as a consequence the CFAM subclasses the FSI slave).
As for FSI, its symbols and wire-protocol are not modelled at all. This
is not necessary to get FSI off the ground thanks to the mapping of the
CFAM address space onto the OPB address space - the models follow this
directly and map the CFAM memory region into the OPB's memory region.
Future work includes supporting more advanced accesses that drive the
FSI master directly rather than indirectly via the CFAM mapping, which
will require implementing the FSI state machine and methods for each of
the FSI symbols on the slave. Further down the track we can also look at
supporting the bitbanged SoftFSI drivers in Linux by extending the FSI
slave model to resolve sequences of GPIO IRQs into FSI symbols, and
calling the associated symbol method on the slave to map the access onto
the CFAM.
Testing:
Tested by reading cfam config address 0 on rainier machine type.
root@p10bmc:~# pdbg -a getcfam 0x0
p0: 0x0 = 0xc0022d15
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
An APB-to-OPB bridge enabling access to the OPB from the ARM core in
the AST2600. Hardware limitations prevent the OPB from being directly
mapped into APB, so all accesses are indirect through the bridge.
The On-Chip Peripheral Bus (OPB): A low-speed bus typically found in
POWER processors. This now makes an appearance in the ASPEED SoC due
to tight integration of the FSI master IP with the OPB, mainly the
existence of an MMIO-mapping of the CFAM address straight onto a
sub-region of the OPB address space.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved FSIMasterState under AspeedAPB2OPBState
- modified fsi_opb_fsi_master_address() and
fsi_opb_opb2fsi_address()
- instroduced fsi_aspeed_apb2opb_init()
- reworked fsi_aspeed_apb2opb_realize()
- removed FSIMasterState object and fsi_opb_realize()
- simplified OPBus
- introduced fsi_aspeed_apb2opb_rw to fix endianness issue ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
This commit models the FSI master. CFAM is hanging out of FSI master which is a bus controller.
The FSI master: A controller in the platform service processor (e.g.
BMC) driving CFAM engine accesses into the POWER chip. At the
hardware level FSI is a bit-based protocol supporting synchronous and
DMA-driven accesses of engines in a CFAM.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - move FSICFAMState object under FSIMasterState
- introduced fsi_master_init()
- reworked fsi_master_realize()
- dropped FSIBus definition ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The Common FRU Access Macro (CFAM), an address space containing
various "engines" that drive accesses on busses internal and external
to the POWER chip. Examples include the SBEFIFO and I2C masters. The
engines hang off of an internal Local Bus (LBUS) which is described
by the CFAM configuration block.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
- moved FSIScratchPad code under cfam.c
- introduced fsi_cfam_instance_init()
- reworked fsi_cfam_realize() ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The FSI slave: The slave is the terminal point of the FSI bus for
FSI symbols addressed to it. Slaves can be cascaded off of one
another. The slave's configuration registers appear in address space
of the CFAM to which it is attached.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where FSI bus is introduced.
The FSI bus is a simple bus where FSI master is attached.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed include/hw/fsi/engine-scratchpad.h and
hw/fsi/engine-scratchpad.c
- dropped FSI_SCRATCHPAD
- included FSIBus definition
- dropped hw/fsi/trace-events changes ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The scratchpad provides a set of non-functional registers. The firmware
is free to use them, hardware does not support any special management
support. The scratchpad registers can be read or written from LBUS
slave. The scratch pad is managed under FSI CFAM state.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - moved object FSIScratchPad under FSICFAMState
- moved FSIScratchPad code under cfam.c ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
This is a part of patchset where IBM's Flexible Service Interface is
introduced.
The LBUS is modelled to maintain mapped memory for the devices. The
memory is mapped after CFAM config, peek table and FSI slave registers.
Signed-off-by: Andrew Jeffery <andrew@aj.id.au>
Signed-off-by: Ninad Palsule <ninad@linux.ibm.com>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
[ clg: - removed lbus_add_device() bc unused
- removed lbus_create_device() bc used only once
- removed "address" property
- updated meson.build to build fsi dir
- included an empty hw/fsi/trace-events ]
Signed-off-by: Cédric Le Goater <clg@kaod.org>
Aspeed SoCs use a single CPU type (set as AspeedSoCClass::cpu_type).
Convert it to a NULL-terminated array (of a single non-NULL element).
Set MachineClass::valid_cpu_types[] to use the common machine code
to provide hints when the requested CPU is invalid (see commit
e702cbc19e ("machine: Improve is_cpu_type_supported()").
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
In order to alter AspeedSoCClass::cpu_type in the next
commit, introduce the aspeed_soc_cpu_type() helper to
retrieve the per-SoC CPU type from AspeedSoCClass.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Gavin Shan <gshan@redhat.com>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
-----BEGIN PGP SIGNATURE-----
iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
=HImO
-----END PGP SIGNATURE-----
Merge tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu into staging
trivial patches for 2024-01-31
# -----BEGIN PGP SIGNATURE-----
#
# iQFDBAABCAAtFiEEe3O61ovnosKJMUsicBtPaxppPlkFAmW6NScPHG1qdEB0bHMu
# bXNrLnJ1AAoJEHAbT2saaT5ZdQYH/2fhfhZotH0V2qAcMxlOoHbAE9UhZNRsSYtf
# QFP0GXFYFAMm7LHkPUbvKgO7LylKWAOMn/zKZqgj1Vf1EpoKQ2FwLtR/buDz86Ec
# pi2OrDPRA7Ay5c3ow3YZZkUOhQTTcR5rNjYctPtt/J4j8ol/z5vre7weJIg2bCJe
# zI7vIVg7iFFzbkXY20KHngJ5nDC+aEm7WaGlxAP8kfkvy324Wy9O2k8qu2J5zbLT
# HGvh3rwEDvRTYe4CaKFFHWNV0m4092HAr/dJBobugI5VZ6QQpK6Tgy8N+4ZrCHD2
# SjUKeym85VTOYGuY8b18fk5MQK2SzsfBUJ4x8VGC75W4mJ8agdc=
# =HImO
# -----END PGP SIGNATURE-----
# gpg: Signature made Wed 31 Jan 2024 11:55:19 GMT
# gpg: using RSA key 7B73BAD68BE7A2C289314B22701B4F6B1A693E59
# gpg: issuer "mjt@tls.msk.ru"
# gpg: Good signature from "Michael Tokarev <mjt@tls.msk.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@corpit.ru>" [full]
# gpg: aka "Michael Tokarev <mjt@debian.org>" [full]
# Primary key fingerprint: 6EE1 95D1 886E 8FFB 810D 4324 457C E0A0 8044 65C5
# Subkey fingerprint: 7B73 BAD6 8BE7 A2C2 8931 4B22 701B 4F6B 1A69 3E59
* tag 'pull-trivial-patches' of https://gitlab.com/mjt0k/qemu: (21 commits)
hw/hyperv: Include missing headers
hw/intc/xics: Include missing 'cpu.h' header
hw/arm: Add `\n` to hint message
hw/loongarch: Add `\n` to hint message
hw/i386: Add `\n` to hint message
backends/hostmem: Fix block comments style (checkpatch.pl warnings)
misc: Clean up includes
riscv: Clean up includes
cxl: Clean up includes
include: Clean up includes
m68k: Clean up includes
acpi: Clean up includes
aspeed: Clean up includes
disas/riscv: Clean up includes
hyperv: Clean up includes
scripts/clean-includes: Update exclude list
mailmap: Fix Stefan Weil email
qemu-docs: Update options for graphical frontends
qapi/migration.json: Fix the member name for MigrationCapability
colo: examples: remove mentions of script= and (wrong) downscript=
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
In cases where a device tries to read more bytes than the block device
contains, the error is vague: "device requires X bytes, block backend
provides Y bytes".
This patch changes the errors of this function to include the block
backend name, the device id and device type name where appropriate.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-id: 7260eadff22c08457740117c1bb7bd2b4353acb9.1706598705.git.manos.pitsidianakis@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Add a simple method to return some kind of human readable identifier for
use in error messages.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Manos Pitsidianakis <manos.pitsidianakis@linaro.org>
Message-id: 8b566bfced98ae44be1fcc1f8e7215f0c3393aa1.1706598705.git.manos.pitsidianakis@linaro.org
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git include include/*/*.h include/*/*/*.h
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git m68k include/hw/audio/asc.h include/hw/m68k/*.h
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
This commit was created with scripts/clean-includes:
./scripts/clean-includes --git acpi include/hw/*/*acpi.h hw/*/*acpi.c
All .c should include qemu/osdep.h first. The script performs three
related cleanups:
* Ensure .c files include qemu/osdep.h first.
* Including it in a .h is redundant, since the .c already includes
it. Drop such inclusions.
* Likewise, including headers qemu/osdep.h includes is redundant.
Drop these, too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Zhao Liu <zhao1.liu@intel.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In order to make accel/tcg/ target agnostic,
introduce the cpu_exec_halt() handler.
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-Id: <20240124101639.30056-9-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
In order to make accel/tcg/ target agnostic,
introduce the need_replay_interrupt() handler.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Anton Johansson <anjo@rev.ng>
Reviewed-by: Pavel Dovgalyuk <Pavel.Dovgalyuk@ispras.ru>
Message-Id: <20240124101639.30056-7-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
QEMU coding style recommends using structure typedefs.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
tcg/ should not depend on accel/tcg/, but perf and debuginfo
support provided by the latter are being used by tcg/tcg.c.
Since that's the only user, move both to tcg/.
Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-5-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-5-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Currently tb_cflags() is defined in exec-all.h, which is not usable
from target-agnostic code. Move it to translation-block.h, which is.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231212003837.64090-3-iii@linux.ibm.com>
Message-Id: <20240125054631.78867-3-philmd@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Always include fake_user_interrupt in user-only build, despite
only being used for i386. This will enable cpu-exec.c to be
compiled only once.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-ID: <20240119144024.14289-18-anjo@rev.ng>
[rth: Split out of a larger patch; remove TARGET_I386 conditional.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
The ifdef out of which it is moved is not quite right: do_interrupt is
only needed for system mode. Move it to the top of a different ifdef
block, which preserves its position within the structure for that case.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-18-anjo@rev.ng>
[rth: Split from a larger patch and simplified.]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Functions are target independent.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-17-anjo@rev.ng>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
These don't vary across targets and are used in soon-to-be common code
(cputlb.c).
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-15-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-11-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Updates target/ QEMU_LOG macros to use VADDR_PRIx for printing updated
DisasContextBase fields.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-10-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Makes gen_intermediate_code() signature target agnostic so the function
can be called from accel/tcg/translate-all.c without target specifics.
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-9-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
cpu-common.h is only needed for vaddr
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-8-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Needed to work around circular includes. vaddr is currently defined in
cpu-common.h and needed by hw/core/cpu.h, but cpu-common.h also need
cpu.h to know the size of the CPUState.
[Maybe we can instead move parts of cpu-common.h w. hw/core/cpu.h to
sort out the circular inclusion.]
Signed-off-by: Anton Johansson <anjo@rev.ng>
Message-Id: <20240119144024.14289-7-anjo@rev.ng>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
[rth: Add include of vaddr.h into cpu-common.h]
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
-----BEGIN PGP SIGNATURE-----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=KQJl
-----END PGP SIGNATURE-----
Merge tag 'for-upstream' of https://repo.or.cz/qemu/kevin into staging
Block layer patches
- virtio-blk: Multiqueue fixes and cleanups
- blklogwrites: Fixes for write_zeroes and superblock update races
- commit/stream: Allow users to request only format driver names in
backing file format
- monitor: only run coroutine commands in qemu_aio_context
- Some iotest fixes
# -----BEGIN PGP SIGNATURE-----
#
# iQJFBAABCAAvFiEE3D3rFZqa+V09dFb+fwmycsiPL9YFAmWzpOwRHGt3b2xmQHJl
# ZGhhdC5jb20ACgkQfwmycsiPL9ZNzg//W1+C7HxLft4Jc4O1BcOoOLlGCg4Esupt
# z0/XLZ9+xVQUtjQ82pFzf9XaWQs8CuNT3FBUKi+ngdwZ0JBThIv0aGiMZBcAeQjD
# qshPFgDM1lGL4ICIaT73/qfUzQgO3oruZj9F+ShBBzoasNWVoRzqqVDR3pinLwTp
# D4TU+3A6LkdhlYGT60SYfRq/UKNmCA1s2wysdjqXxS6KOEURNF2VBnz0Nu76qrVb
# 3P/a55GPiJIn+VVsdQ0J4vyyzn23m7I7WZOJ7Sjm1EfSJ6SvcDbhWsZTUonaV2rU
# qZ3WI/jggqxXRV8F2AaA4suS/Cc8RkX2KfcN8fB6wDC2eI5USSatjh6xfw5xH9Ll
# NRKUO4vFFR3Lf8wN9apg0Bwxqi0GOm9kvBJT5QqjQ16R1dvqBLqbZqcx6ZXqWFXe
# /Iy243Tz19mWTFVUj0EgCKQpNz9F4SyXxV83HtSR1lJ5mhthnLxkvUOe7jsFPE4d
# 1Z3uBNWnx2mKFkhlwocMTKayYqxPuKQ+YjqrRoplLW1GZoBeoalKRGf8/RHa6kQx
# gh4cguihlb71AH1AO1QuYpiZt9G4RJR2RZlIoCPJY5TaKJedcxMVn8H+8/F0PnQd
# gPysZf7hTU1xCUV6TClDd+f2fuvqZYwXdwHJ9iiohNkbFq4HFQUp4nk4/eEPGSe/
# uv8oE813E30=
# =KQJl
# -----END PGP SIGNATURE-----
# gpg: Signature made Fri 26 Jan 2024 12:26:20 GMT
# gpg: using RSA key DC3DEB159A9AF95D3D7456FE7F09B272C88F2FD6
# gpg: issuer "kwolf@redhat.com"
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* tag 'for-upstream' of https://repo.or.cz/qemu/kevin:
iotests/277: Use iotests.sock_dir for socket creation
iotests/iothreads-stream: Use the right TimeoutError
tests/unit: Bump test-replication timeout to 60 seconds
iotests/264: Use iotests.sock_dir for socket creation
block/blklogwrites: Protect mutable driver state with a mutex.
virtio-blk: always set ioeventfd during startup
virtio-blk: tolerate failure to set BlockBackend AioContext
virtio-blk: restart s->rq reqs in vq AioContexts
virtio-blk: rename dataplane to ioeventfd
virtio-blk: rename dataplane create/destroy functions
virtio-blk: move dataplane code into virtio-blk.c
monitor: only run coroutine commands in qemu_aio_context
iotests: port 141 to Python for reliable QMP testing
iotests: add filter_qmp_generated_node_ids()
stream: Allow users to request only format driver names in backing file format
commit: Allow users to request only format driver names in backing file format
string-output-visitor: Fix (pseudo) struct handling
block/blklogwrites: Fix a bug when logging "write zeroes" operations.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The const_le64() macro introduced in commit 845d80a8c7 turns out
to have a bug which means that on big-endian systems the compiler
complains if the argument isn't already a 64-bit type. This hasn't
caused a problem yet, because there are no in-tree uses, but it
means it's not possible for anybody to add one without it failing CI.
This example is from an attempted use of it with the argument '0',
from the s390 CI runner's gcc:
../block/blklogwrites.c: In function ‘blk_log_writes_co_do_log’:
../include/qemu/bswap.h:148:36: error: left shift count >= width of
type [-Werror=shift-count-overflow]
148 | ((((_x) & 0x00000000000000ffU) << 56) | \
| ^~
../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’
409 | .nr_entries = const_le64(0),
| ^~~~~~~~~~
../include/qemu/bswap.h:149:36: error: left shift count >= width of
type [-Werror=shift-count-overflow]
149 | (((_x) & 0x000000000000ff00U) << 40) | \
| ^~
../block/blklogwrites.c:409:27: note: in expansion of macro ‘const_le64’
409 | .nr_entries = const_le64(0),
| ^~~~~~~~~~
cc1: all warnings being treated as errors
Fix this by making all the constants in the macro have the ULL
suffix. This will cause them all to be 64-bit integers, which means
the result of the logical & will also be an unsigned 64-bit type,
even if the input to the macro is a smaller type, and so the shifts
will be in range.
Fixes: 845d80a8c7 ("qemu/bswap: Add const_le64()")
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Ira Weiny <ira.weiny@intel.com>
Message-id: 20240122173735.472951-1-peter.maydell@linaro.org
This patch implements a 32 half word FIFO as per imx serial device
specifications. If a non empty FIFO is below the trigger level, an
ageing timer will tick for a duration of 8 characters. On expiry,
AGTIM will be set triggering an interrupt. AGTIM timer resets when
there is activity in the receive FIFO.
Otherwise, RRDY is set when trigger level is exceeded. The receive
trigger level is 8 in newer kernel versions and 1 in older ones.
This change will break migration compatibility for the imx boards.
Signed-off-by: Rayhan Faizel <rayhan.faizel@gmail.com>
Message-id: 20240125151931.83494-1-rayhan.faizel@gmail.com
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
[PMM: commit message tidyups]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add MMDC, OCOTP, SQPI, CAAM, and USBMISC as unimplemented devices.
This allows operating systems such as Linux to run emulations such as
mcimx6ul-evk.
Before commit 0cd4926b85 ("Refactor i.MX6UL processor code"), the affected
memory ranges were covered by the unimplemented DAP device. The commit
reduced the DAP address range from 0x100000 to 4kB, and the emulation
thus no longer covered the various unimplemented devices in the affected
address range.
Fixes: 0cd4926b85 ("Refactor i.MX6UL processor code")
Cc: Jean-Christophe Dubois <jcd@tribudubois.net>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240120005356.2599547-1-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Now than we can access the M-profile bank index
definitions from the target-agnostic "cpu-qom.h"
header, we don't need the huge "cpu.h" anymore
(except in hw/arm/armv7m.c). Reduce its inclusion
to the source unit.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-17-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
"target/arm/cpu.h" is target specific, any file including it
becomes target specific too, thus this is the same for any file
including "hw/misc/xlnx-versal-crl.h".
"hw/misc/xlnx-versal-crl.h" doesn't require any target specific
definition however, only the target-agnostic QOM definitions
from "target/arm/cpu-qom.h". Include the latter header to avoid
tainting unnecessary objects as target-specific.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-14-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
include/hw/arm/xlnx-versal.h uses the ARMCPU structure which
is defined in the "target/arm/cpu.h" header. Include it in
order to avoid when refactoring unrelated headers:
In file included from hw/arm/xlnx-versal-virt.c:20:
include/hw/arm/xlnx-versal.h:62:23: error: array has incomplete element type 'ARMCPU' (aka 'struct ArchCPU')
ARMCPU cpu[XLNX_VERSAL_NR_ACPUS];
^
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20240118200643.29037-5-philmd@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Add watchdog timer support to Allwinner-H40 and Bananapi.
The watchdog timer is added as an overlay to the Timer
module memory map.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Strahinja Jankovic <strahinja.p.jankovic@gmail.com>
Message-id: 20240115182757.1095012-4-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 supports an AHCI compliant SATA controller.
Add support for it.
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Message-id: 20240115182757.1095012-3-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Allwinner R40 supports two USB host ports shared between a USB 2.0 EHCI
host controller and a USB 1.1 OHCI host controller. Add support for both
of them.
If machine USB support is not enabled, create unimplemented devices
for the USB memory ranges to avoid crashes when booting Linux.
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-id: 20240115182757.1095012-2-linux@roeck-us.net
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
The dataplane code is really about using ioeventfd. It's used both for
IOThreads (what we think of as dataplane) and for the core virtio-pci
code's ioeventfd feature (which is enabled by default and used when no
IOThread has been specified). Rename the code to reflect this.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-4-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The dataplane code used to be significantly different from the
non-dataplane code and therefore had a separate source file.
Over time the difference has gotten smaller because the I/O code paths
were unified. Nowadays the distinction between the VirtIOBlock and
VirtIOBlockDataPlane structs is more of an inconvenience that hinders
code simplification.
Move hw/block/dataplane/virtio-blk.c into hw/block/virtio-blk.c, merging
VirtIOBlockDataPlane's fields into VirtIOBlock.
hw/block/virtio-blk.c used VirtIOBlock->dataplane to check if
virtio_blk_data_plane_create() was successful. This is not necessary
because ->dataplane_started and ->dataplane_disabled can be used
instead. This patch makes those changes in order to drop
VirtIOBlock->dataplane.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-ID: <20240119135748.270944-2-stefanha@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-stream QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <bbee9a0a59748a8893289bf8249f568f0d587e62.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Introduce a new flag 'backing-mask-protocol' for the block-commit QMP
command which instructs the internals to use 'raw' instead of the
protocol driver in case when a image is used without a dummy 'raw'
wrapper.
The flag is designed such that it can be always asserted by management
tools even when there isn't any update to backing files.
The flag will be used by libvirt so that the backing images still
reference the proper format even when libvirt will stop using the dummy
raw driver (raw driver with no other config). Libvirt needs this so that
the images stay compatible with older libvirt versions which didn't
expect that a protocol driver name can appear in the backing file format
field.
Signed-off-by: Peter Krempa <pkrempa@redhat.com>
Reviewed-by: Vladimir Sementsov-Ogievskiy <vsementsov@yandex-team.ru>
Message-ID: <2cb46e37093ce793ea1604abc8bbb90f4c8e434b.1701796348.git.pkrempa@redhat.com>
Reviewed-by: Kevin Wolf <kwolf@redhat.com>
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Conversion of docs/devel/qapi-code-gen.txt to ReST left several
dangling references behind. Fix them to point to
docs/devel/qapi-code-gen.rst.
Fixes: f7aa076dbd (docs: convert qapi-code-gen.txt to ReST)
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Message-ID: <20240120095327.666239-4-armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Now that uri_resolve_relative() has been removed, this function is not
used in QEMU anymore - and if somebody needs this functionality, they
can simply use g_uri_escape_string() from the glib instead.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-4-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
These rather complex functions have never been used since they've been
introduced in 2012, so looks like they are not really useful for QEMU.
And since the static normalize_uri_path() function is also only used by
uri_resolve(), we can remove that function now, too.
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: "Daniel P. Berrangé" <berrange@redhat.com>
Message-ID: <20240123182247.432642-3-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Thomas Huth <thuth@redhat.com>
uri_string_unescape() basically does the same as the glib function
g_uri_unescape_segment(). So we can get rid of our implementation
completely by simply using the glib function instead.
Suggested-by: Stefan Weil <sw@weilnetz.de>
Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Message-ID: <20240123182247.432642-2-thuth@redhat.com>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Thomas Huth <thuth@redhat.com>
Some ELF files really do have segments of zero size, e.g.:
Program Headers:
Type Offset VirtAddr PhysAddr
FileSiz MemSiz Flags Align
RISCV_ATTRIBUT 0x00000000000025b8 0x0000000000000000 0x0000000000000000
0x000000000000003e 0x0000000000000000 R 0x1
LOAD 0x0000000000001000 0x0000000080200000 0x0000000080200000
0x00000000000001d1 0x00000000000001d1 R E 0x1000
LOAD 0x00000000000011d1 0x00000000802001d1 0x00000000802001d1
0x0000000000000e37 0x0000000000000e37 RW 0x1000
LOAD 0x0000000000000120 0x0000000000000000 0x0000000000000000
0x0000000000000000 0x0000000000000000 0x1000
The current logic does not check for this condition, resulting in
the incorrect assignment of 'lowaddr' as zero.
There is already a piece of codes inside the segment traversal loop
that checks for zero-sized loadable segments for not creating empty
ROM blobs. Let's move this check to the beginning of the loop to
cover both scenarios.
Signed-off-by: Bin Meng <bmeng@tinylab.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20240116155049.390301-1-bmeng@tinylab.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-7-philmd@linaro.org>
Rather than having to lookup for what the 0, 1, 2, ...
icount values are, use a enum definition.
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Message-ID: <20231208113529.74067-4-philmd@linaro.org>
Following the example documented since commit e3fe3988d7 ("error:
Document Error API usage rules"), have icount_configure()
return a boolean indicating whether an error is set or not.
Reviewed-by: Richard Henderson <richard.henderson@linaro.org>
Signed-off-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Message-ID: <20231208113529.74067-2-philmd@linaro.org>
