Here the virtio-9p-pci is modified for the new API. The device
virtio-9p-pci extends virtio-pci. It creates and connects a
virtio-9p-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-9p-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Message-id: 1366708123-19626-2-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allows to remove one FIXME. Makes LIBUSB_LOG_LEVEL_WARNING build errors
go away. And starting with that version libusb has a LIBUSBX_API_VERSION
define which allows to easily #ifdef version dependencies should that
need arrive in the future.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Report the supported speeds for device and port in the error message.
Also add the speeds to the tracepoint. And while being at it drop
the redundant error message in usb_desc_attach, usb_device_attach will
report the error anyway.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
With pipelining it is possible to encounter a finished packet when cleaning
the queue due to a halt. This happens when a non stall error happens while
talking to a real device. In this case the queue on the usb-host side will
continue processing packets, and we can have completed packets waiting in
the queue after an error condition packet causing a halt.
There are 2 reasons to discard the completed packets at this point, rather
then trying to writing them back to the guest:
1) The guest expect to be able to cancel and/or change packets after the
packet with the error without doing an unlink, so writing them back may
confuse the guest.
2) Since the queue does not advance when halted, the writing back of these
packets will fail anyways since p->qtdaddr != q->qtdaddr, so the
ehci_verify_qtd call in ehci_writeback_async_complete_packet will fail.
Note that 2) means that then only functional change this patch introduces
is the printing of a warning when this scenario happens.
Note that discarding these packets means that the guest driver and the device
will get out of sync! This is unfortunate, but should not be a problem since
with a non stall error (iow an io-error) the 2 are out of sync already anyways.
Still this patch adds a warning to signal this happening.
Note that sofar this has only been seen with a DVB-T receiver, which gives
of a MPEG-2 stream, which allows for recovering from lost packets, see:
https://bugzilla.redhat.com/show_bug.cgi?id=890320
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Simplify the creation of the cancel path given the TPM's device path.
Given the path /dev/tpm0 build the path /sys/class/misc/tpm0/device/cancel.
Signed-off-by: Stefan Berger <stefanb@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1366146516-23814-1-git-send-email-stefanb@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Paolo Bonzini (5) and others
# Via Paolo Bonzini
* bonzini/scsi-next:
vhost-scsi-s390: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-ccw: new device supporting the tcm_vhost Linux kernel module
vhost-scsi-pci: new device supporting the tcm_vhost Linux kernel module
vhost-scsi: new device supporting the tcm_vhost Linux kernel module
virtio: simplify Makefile conditionals
virtio-scsi: create VirtIOSCSICommon
vhost: Add vhost_commit callback for SeaBIOS ROM region re-mapping
scsi: VMWare PVSCSI paravirtual device implementation
scsi: avoid assertion failure on VERIFY command
Message-id: 1366381460-6041-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Amos Kong (1) and Luiz Capitulino (1)
# Via Luiz Capitulino
* luiz/queue/qmp:
virtio-balloon: fix integer overflow in BALLOON_CHANGE QMP event
monitor: fix the wrong order of releasing keys
Message-id: 1366375833-995-1-git-send-email-lcapitulino@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Drop all the infrastructure for taddr properties (ie ones which
are 'hwaddr' sized). These are now unused, and any further desired
use would be rather questionable since device properties shouldn't
generally depend on a type that is conceptually variable based on
the target CPU. 32 or 64 bit integer properties should be used instead
as appropriate for the specific device.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
The sysbus-ohci dma-address property is declared as a HEX64
property, not a TADDR, so use the correct setter for it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Andreas Färber <afaerber@suse.de>
Tested-by: Aurelien Jarno <aurelien@aurel32.net>
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
* 'arm-devs.next' of git://git.linaro.org/people/pmaydell/qemu-arm:
hw/versatile_pci: Drop unnecessary vpb_pci_config_addr()
versatile_pci: Expose PCI memory space to system
arm/realview: Fix mapping of PCI regions
versatile_pci: Implement the PCI controller's control registers
versatile_pci: Implement the correct PCI IRQ mapping
versatile_pci: Put the host bridge PCI device at slot 29
versatile_pci: Use separate PCI I/O space rather than system I/O space
versatile_pci: Change to subclassing TYPE_PCI_HOST_BRIDGE
versatile_pci: Update to realize and instance init functions
versatile_pci: Expose PCI I/O region on Versatile PB
versatile_pci: Fix hardcoded tabs
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Asias He <asias@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
The WWPN specified in configfs is passed to "-device vhost-scsi-pci".
The tgpt field of the SET_ENDPOINT ioctl is obsolete now, so it is not
available from the QEMU command-line. Instead, I hardcode it to zero.
Changes in Patch-v2:
- Add vhost_scsi_get_features() in order to determine feature bits
supports by host kernel (mst + nab)
- Re-enable usage of DEFINE_VIRTIO_COMMON_FEATURES, and allow
EVENT_IDX to be disabled by host in vhost_scsi_get_features()
- Drop unused hotplug bit in DEFINE_VHOST_SCSI_PROPERTIES
Changes in Patch-v1:
- Set event_idx=off by default (nab, thanks asias)
- Disable hotplug feature bit for v3.9 tcm_vhost kernel code, need to
re-enable in v3.10 (nab)
- Update to latest qemu.git/master HEAD
Changes in WIP-V3:
- Drop ioeventfd vhost_scsi_properties (asias, thanks stefanha)
- Add CONFIG_VHOST_SCSI (asias, thanks stefanha)
- Add hotplug feature bit
Changes in WIP-V2:
- Add backend guest masking support (nab)
- Bump ABI_VERSION to 1 (nab)
- Set up set_guest_notifiers (asias)
- Set up vs->dev.vq_index (asias)
- Drop vs->vs.vdev.{set,clear}_vhost_endpoint (asias)
- Drop VIRTIO_CONFIG_S_DRIVER check in vhost_scsi_set_status (asias)
Howto:
Use the latest seabios, at least commit b44a7be17b
git clone git://git.seabios.org/seabios.git
make
cp out/bios.bin /usr/share/qemu/bios.bin
qemu -device vhost-scsi-pci,wwpn=naa.6001405bd4e8476d,event_idx=off
...
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Signed-off-by: Asias He <asias@redhat.com>
[ Rebase on top of VirtIOSCSICommon patch, fix bugs in feature
negotiation and irqfd masking - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This patch refactors existing virtio-scsi code into VirtIOSCSICommon
in order to allow virtio_scsi_init_common() to be used by both internal
virtio_scsi_init() and external vhost-scsi-pci code.
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
# By Stefan Weil (3) and others
# Via Stefan Hajnoczi
* stefanha/trivial-patches:
m25p80: Remove bogus include of devices.h
ssh: Remove unnecessary use of strlen function.
block/ssh: Add missing gcc format attributes
linux-user: change do_semop to return target errno when unsuccessful
w64: Fix compiler warnings (wrong format specifier)
Remove unneeded type casts
virtio.h: drop unused function prototypes
bswap: fix compiler warning
Message-id: 1366371241-23430-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.13 (GNU/Linux)
iQEcBAABAgAGBQJRbIJQAAoJECgfDbjSjVRpQuoH/RfMHb6YYfsuwJKUsjCKxhdr
695YqNsBLmh7E/+wr1dwUsKrMGSF97VSGAIPeX0u4wwP6jrORhA9iycCevXYlh/S
O7RTcePqVEQrwnMX5rOAEWGARVzg4hAT8i4Pdza1A+gBvaO/WLZIVJfUOHBAZNL7
2TTDymfixipErcTcxckITHfaShn9ajZgt/Yo8oVX70VqklWU+OEU/tYEXmvTC0H3
bTuTU3vpeAlCubF0AHHZqWA9g7myrKMCxwv4LWx7gmQGXoyQesy4s5C9KMrld1On
RovLw0REbtjB2xGjAj3g82ESK5eoi295Th/E7Fu1NJNYyDyfhxB7/cnbRa+Wpsg=
=jvZE
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'mst/tags/for_anthony' into staging
pci: add pci test device
This adds a new device that we can use for testing PCI PIO and MMIO, with and
without ioeventfd in different configurations. FAST_MMIO will be added if/when
kvm supports it. Also included are minor cleanups in kvm APIs that it needs.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
# gpg: Signature made Mon 15 Apr 2013 05:42:24 PM CDT using RSA key ID D28D5469
# gpg: Can't check signature: public key not found
# By Michael S. Tsirkin
# Via Michael S. Tsirkin
* mst/tags/for_anthony:
pci: add pci test device
kvm: support non datamatch ioeventfd
kvm: support any size for pio eventfd
kvm: remove unused APIs
Message-id: cover.1366272004.git.mst@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Because dev->actual is uint32_t, the expression 'dev->actual <<
VIRTIO_BALLOON_PFN_SHIFT' is truncated to 32 bits. This overflows when
dev->actual >= 1048576.
To reproduce:
1. Start a VM with a QMP socket and 5G of RAM
2. Connect to the QMP socket, negotiate capabilities and issue:
{ "execute":"balloon", "arguments": { "value": 1073741824 } }
3. Watch for BALLOON_CHANGE QMP events, the last one will incorretly be:
{ "timestamp": { "seconds": 1366228965, "microseconds": 245466 },
"event": "BALLOON_CHANGE", "data": { "actual": 5368709120 } }
To fix it this commit casts it to ram_addr_t, which is ram_size's type.
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Drop the vpb_pci_config_addr() function -- it is unnecessary since
the size of the memory regions means the hwaddr is always within
the 24 bit size. (This function was probably a leftover from when
read/write functions were called with absolute addresses rather
than relative ones.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
The VersatilePB's PCI controller exposes the PCI memory space to the
system via three regions controlled by the mapping control registers.
Implement this so that guests can actually use MMIO-BAR PCI cards.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Fix the mapping of the PCI regions for the realview board, which were
all incorrect. (This was never noticed because the Linux kernel
doesn't actually include a PCI driver for the realview boards.)
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
The versatile_pci PCI controller has a set of control registers which
handle the mapping between PCI and system address spaces. Implement
these registers (though for now they have no effect since we don't
implement mapping PCI space into system memory at all).
The most natural order for our sysbus regions has the control
registers at the start, so move all the others down one.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Implement the correct IRQ mapping for the Versatile PCI controller; it
differs between realview and versatile boards, but the previous QEMU
implementation was correct only for the first PCI card on a versatile
board, since we weren't swizzling IRQs based on the slot number.
Since this change would otherwise break any uses of PCI on Linux kernels
which have an equivalent bug (since they have effectively only been
tested against QEMU, not real hardware), we implement a mechanism
for automatically detecting those broken kernels and switching back
to the old mapping. This works by looking at the values the kernel
writes to the PCI_INTERRUPT_LINE register in the config space, which
is effectively the interrupt number the kernel expects the device
to be using.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
On real hardware the host bridge appears as a PCI device in slot 29,
so make QEMU put its host bridge in that slot too.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Rather than overloading the system I/O space (which doesn't even make
any sense on ARM) for PCI I/O, create an memory region in the PCI
controller and use that to represent the I/O space.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Change versatile_pci to subclass TYPE_PCI_HOST_BRIDGE and generally
handle PCI in a more QOM-like fashion.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Update the Versatile PCI controller to use a realize function rather
than SysBusDevice::init. To reflect the fact that the 'realview_pci'
class is taking most of its implementation from 'versatile_pci' (and
to make the QOM casts work) we make 'realview_pci' a subclass of
'versatile_pci'.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
Comments in the QEMU source code claim that the version of the PCI
controller on the VersatilePB board doesn't support the PCI I/O
region, but this is incorrect; expose that region, map it in the
correct location, and drop the misleading comments.
This change removes the only currently implemented difference
between the realview-pci and versatile-pci models; however there
are other differences in not-yet-implemented functionality, so we
retain the distinction between the two device types.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
There is just one line in this source file with a hardcoded tab
indent, so just fix it.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Acked-by: Paul Brook <paul@codesourcery.com>
I think in the early revisions of this we had an instantiation helper
for the device in devices.h. This was later removed and this header was
left over. Removed
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
cpu_physical_memory_read, cpu_physical_memory_write take any pointer
as 2nd argument without needing a type cast.
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
This patch follows MST's recommendation to move checks for
vhost_verify_ring_mappings() -> cpu_physical_memory_map() operations
from MemoryListener->region_[add,del]() -> vhost_set_memory() into
final MemoryListener->commit() -> vhost_commit() callback.
It addresses the case where virtio-scsi vq ioport RAM re-mapping
to read-only SeaBIOS ROM triggers a cpu_physical_memory_map()
NIL MemoryRegionSection pointer failure.
Also save vhost_dev->mem_changed_[start,end]_addr values in
vhost_set_memory() for final ranges_overlap checks. (Thanks Paolo!)
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Asias He <asias@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Dmitry Fleytman <dmitry@daynix.com>
Signed-off-by: Yan Vugenfirer <yan@daynix.com>
[ Rename files to vmw_pvscsi, fix setting of hostStatus in
pvscsi_request_cancelled - Paolo ]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
A verify command is not an actual read (we do not implement
compare mode) and thus does not have an AIOCB attached. Do
not crash in scsi_dma_complete.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This remove old init and exit function as they are no longer needed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-8-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As the virtio-net-pci and virtio-net-s390 are switched to the new API,
we can use QOM casts.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-7-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-ccw is modified for the new API. The device
virtio-net-ccw extends virtio-ccw-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-6-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-s390 is modified for the new API. The device
virtio-net-s390 extends virtio-s390-device as before. It creates and
connects a virtio-net-device during the init. The properties are not modified.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-5-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Here the virtio-net-pci is modified for the new API. The device
virtio-net-pci extends virtio-pci. It creates and connects a
virtio-net-device during the init. The properties are not changed.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-4-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Create virtio-net-device which extends virtio-device, so it can be connected on
virtio-bus.
Signed-off-by: KONRAD Frederic <fred.konrad@greensocs.com>
Tested-by: Cornelia Huck <cornelia.huck@de.ibm.com>
Message-id: 1365690602-22729-3-git-send-email-fred.konrad@greensocs.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Hans de Goede (5) and others
# Via Gerd Hoffmann
* spice/spice.v69:
spice-qemu-char: vmc_write: Don't write more bytes then we're asked too
spice-qemu-char: Remove intermediate buffer
spice-qemu-char: Add watch support
spice-qemu-char: Remove #ifdef-ed code for old spice-server compat
virtio-console: Remove any pending watches on close
virtio-console: Also throttle when less was written then requested
spice: (32 bit only) fix surface cmd tracking destruction
qxl: add 2000x2000 and 2048x2048 video modes
qxl: add 4k + 8k resolutions
Message-id: 1366106194-28826-1-git-send-email-kraxel@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Igor Mammedov (8) and others
# Via Andreas Färber
* afaerber/qom-cpu:
target-cris: Override do_interrupt for pre-v32 CPU cores
qdev: Set device's parent before calling realize() down inheritance chain
cpu: Pass CPUState to *cpu_synchronize_post*()
target-i386: Split out CPU creation and features parsing
target-i386/cpu.c: Coding style fixes
ioapic: Replace FROM_SYSBUS() with QOM type cast
kvmvapic: Replace FROM_SYSBUS() with QOM type cast
target-i386: Split APIC creation from initialization in x86_cpu_realizefn()
target-i386: Consolidate error propagation in x86_cpu_realizefn()
qdev: Add qdev property for bool type
target-i386: Improve -cpu ? features output
target-i386: Fix including "host" in -cpu ? output
Reimplement usb-host on top of libusb.
Reasons to do this:
(1) Largely rewritten from scratch, nice opportunity to kill historical
cruft.
(2) Offload usbfs handling to libusb.
(3) Have a single portable code base instead of bsd + linux variants.
(4) Bring usb-host support to any platform supported by libusbx.
For now this goes side-by-side to the existing code. That is only to
simplify regression testing though, at the end of the day I want remove
the old code and support libusb exclusively. Merge early in 1.5 cycle,
remove the old code after 1.5 release or something like this.
Thanks to qdev the old and new code can coexist nicely on linux. Just
use "-device usb-host-linux" to use the old linux driver instead of the
libusb one (which takes over the "usb-host" name).
The bsd driver isn't qdev'ified so it isn't that easy for bsd.
I didn't bother making it runtime switchable, so you have to rebuild
qemu with --disable-libusb to get back the old code.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
