Some guests read back queue size after writing it.
Always update the on size write otherwise they might be confused.
Cc: qemu-stable@nongnu.org
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191224081446.17003-1-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
It tests proper seg_max_adjust settings for all machine types except
'none', 'isapc', 'microvm'
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-3-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Before the patch, seg_max parameter was immutable and hardcoded
to 126 (128 - 2) without respect to queue size. This has two negative effects:
1. when queue size is < 128, we have Virtio 1.1 specfication violation:
(2.6.5.3.1 Driver Requirements) seq_max must be <= queue_size.
This violation affects the old Linux guests (ver < 4.14). These guests
crash on these queue_size setups.
2. when queue_size > 128, as was pointed out by Denis Lunev <den@virtuozzo.com>,
seg_max restrics guest's block request length which affects guests'
performance making them issues more block request than needed.
https://lists.gnu.org/archive/html/qemu-devel/2017-12/msg03721.html
To mitigate this two effects, the patch adds the property adjusting seg_max
to queue size automaticaly. Since seg_max is a guest visible parameter,
the property is machine type managable and allows to choose between
old (seg_max = 126 always) and new (seg_max = queue_size - 2) behaviors.
Not to change the behavior of the older VMs, prevent setting the default
seg_max_adjust value for older machine types.
Reviewed-by: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191220140905.1718-2-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
5.0 machine type uses 4.2 compats. This seems to be incorrect, since
the latests machine type by now is 5.0 and it should use its own
compat or shouldn't use any relying on the defaults.
Seems, like this appeared because of some problems on merge/rebase.
Signed-off-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Message-Id: <20191223072856.5369-1-dplotnikov@virtuozzo.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If the vhost-user-scsi backend supports the VHOST_USER_F_RESET_DEVICE
protocol feature, then the device can be reset when requested.
If this feature is not supported, do not try a reset as this will send
a VHOST_USER_RESET_OWNER that the backend is not expecting,
potentially putting into an inoperable state.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-3-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add a VHOST_USER_RESET_DEVICE message which will reset the vhost user
backend. Disabling all rings, and resetting all internal state, ready
for the backend to be reinitialized.
A backend has to report it supports this features with the
VHOST_USER_PROTOCOL_F_RESET_DEVICE protocol feature bit. If it does
so, the new message is used instead of sending a RESET_OWNER which has
had inconsistent implementations.
Signed-off-by: David Vrabel <david.vrabel@nutanix.com>
Signed-off-by: Raphael Norwitz <raphael.norwitz@nutanix.com>
Message-Id: <1572385083-5254-2-git-send-email-raphael.norwitz@nutanix.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Both functions are called by MemoryRegionOps.[read/write] handlers
with unsigned 'size' argument. Both functions call
pci_host_config_[read/write]_common() which expect a uint32_t 'len'
parameter (also unsigned).
Since it is pointless (and confuse) to use a signed value, use a
unsigned type.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216002134.18279-3-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In commit 3bf4dfdd11 we introduced the pci_cfg_[read/write]
trace events in pci_host_config_[read/write]_common().
We have the following call trace:
pci_host_data_[read/write]()
- PCI_DPRINTF()
- pci_data_[read/write]()
- PCI_DPRINTF()
- pci_host_config_[read/write]_common()
trace_pci_cfg_[read/write]()
Since the PCI_DPRINTF() calls are redundant with the trace
events, remove them.
Signed-off-by: Philippe Mathieu-Daudé <philmd@redhat.com>
Message-Id: <20191216002134.18279-2-philmd@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
At the moment when the guest writes a status of 0, we only reset the
virtio core state but not the virtio-mmio state. The virtio-mmio
specification says (v1.1 cs01, 4.2.2.1 Device Requirements:
MMIO Device Register Layout):
Upon reset, the device MUST clear all bits in InterruptStatus and
ready bits in the QueueReady register for all queues in the device.
The core already takes care of InterruptStatus by clearing isr, but we
still need to clear QueueReady.
It would be tempting to clean all registers, but since the specification
doesn't say anything more, guests could rely on the registers keeping
their state across reset. Linux for example, relies on this for
GuestPageSize in the legacy MMIO tranport.
Fixes: 44e687a4d9 ("virtio-mmio: implement modern (v2) personality (virtio-1)")
Signed-off-by: Jean-Philippe Brucker <jean-philippe@linaro.org>
Message-Id: <20191213095410.1516119-1-jean-philippe@linaro.org>
Reviewed-by: Sergio Lopez <slp@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
ACPI table HMAT has been introduced, QEMU now builds HMAT tables for
Heterogeneous Memory with boot option '-numa node'.
Add test cases on PC and Q35 machines with 2 numa nodes.
Because HMAT is generated when system enable numa, the
following tables need to be added for this test:
tests/data/acpi/pc/APIC.acpihmat
tests/data/acpi/pc/SRAT.acpihmat
tests/data/acpi/pc/HMAT.acpihmat
tests/data/acpi/pc/DSDT.acpihmat
tests/data/acpi/q35/APIC.acpihmat
tests/data/acpi/q35/SRAT.acpihmat
tests/data/acpi/q35/HMAT.acpihmat
tests/data/acpi/q35/DSDT.acpihmat
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jingqi Liu <Jingqi.liu@intel.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-9-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Check configuring HMAT usecase
Acked-by: Markus Armbruster <armbru@redhat.com>
Suggested-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-8-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
This structure describes memory side cache information for memory
proximity domains if the memory side cache is present and the
physical device forms the memory side cache.
The software could use this information to effectively place
the data in memory to maximize the performance of the system
memory that use the memory side cache.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-7-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This structure describes the memory access latency and bandwidth
information from various memory access initiator proximity domains.
The latency and bandwidth numbers represented in this structure
correspond to rated latency and bandwidth for the platform.
The software could use this information as hint for optimization.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-6-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
HMAT is defined in ACPI 6.3: 5.2.27 Heterogeneous Memory Attribute Table
(HMAT). The specification references below link:
http://www.uefi.org/sites/default/files/resources/ACPI_6_3_final_Jan30.pdf
It describes the memory attributes, such as memory side cache
attributes and bandwidth and latency details, related to the
Memory Proximity Domain. The software is
expected to use this information as hint for optimization.
This structure describes Memory Proximity Domain Attributes by memory
subsystem and its associativity with processor proximity domain as well as
hint for memory usage.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Daniel Black <daniel@linux.ibm.com>
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-5-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Add -numa hmat-cache option to provide Memory Side Cache Information.
These memory attributes help to build Memory Side Cache Information
Structure(s) in ACPI Heterogeneous Memory Attribute Table (HMAT).
Before using hmat-cache option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-4-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Add -numa hmat-lb option to provide System Locality Latency and
Bandwidth Information. These memory attributes help to build
System Locality Latency and Bandwidth Information Structure(s)
in ACPI Heterogeneous Memory Attribute Table (HMAT). Before using
hmat-lb option, enable HMAT with -machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Liu Jingqi <jingqi.liu@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-3-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
In ACPI 6.3 chapter 5.2.27 Heterogeneous Memory Attribute Table (HMAT),
The initiator represents processor which access to memory. And in 5.2.27.3
Memory Proximity Domain Attributes Structure, the attached initiator is
defined as where the memory controller responsible for a memory proximity
domain. With attached initiator information, the topology of heterogeneous
memory can be described. Add new machine property 'hmat' to enable all
HMAT specific options.
Extend CLI of "-numa node" option to indicate the initiator numa node-id.
In the linux kernel, the codes in drivers/acpi/hmat/hmat.c parse and report
the platform's HMAT tables. Before using initiator option, enable HMAT with
-machine hmat=on.
Acked-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Igor Mammedov <imammedo@redhat.com>
Reviewed-by: Jingqi Liu <jingqi.liu@intel.com>
Suggested-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Tao Xu <tao3.xu@intel.com>
Message-Id: <20191213011929.2520-2-tao3.xu@intel.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Virtqueue notifications are not necessary during polling, so we disable
them. This allows the guest driver to avoid MMIO vmexits.
Unfortunately the virtio-blk and virtio-scsi handler functions re-enable
notifications, defeating this optimization.
Fix virtio-blk and virtio-scsi emulation so they leave notifications
disabled. The key thing to remember for correctness is that polling
always checks one last time after ending its loop, therefore it's safe
to lose the race when re-enabling notifications at the end of polling.
There is a measurable performance improvement of 5-10% with the null-co
block driver. Real-life storage configurations will see a smaller
improvement because the MMIO vmexit overhead contributes less to
latency.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Message-Id: <20191209210957.65087-1-stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This patch is to add standard commands defined in docs/interop/vhost-user.rst
For vhost-user-* program
Signed-off-by: Micky Yun Chan (michiboo) <chanmickyyun@gmail.com>
Message-Id: <20191209015331.5455-1-chanmickyyun@gmail.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Currently the SLOF firmware for pseries guests will disable/re-enable
a PCI device multiple times via IO/MEM/MASTER bits of PCI_COMMAND
register after the initial probe/feature negotiation, as it tends to
work with a single device at a time at various stages like probing
and running block/network bootloaders without doing a full reset
in-between.
In QEMU, when PCI_COMMAND_MASTER is disabled we disable the
corresponding IOMMU memory region, so DMA accesses (including to vring
fields like idx/flags) will no longer undergo the necessary
translation. Normally we wouldn't expect this to happen since it would
be misbehavior on the driver side to continue driving DMA requests.
However, in the case of pseries, with iommu_platform=on, we trigger the
following sequence when tearing down the virtio-blk dataplane ioeventfd
in response to the guest unsetting PCI_COMMAND_MASTER:
#2 0x0000555555922651 in virtqueue_map_desc (vdev=vdev@entry=0x555556dbcfb0, p_num_sg=p_num_sg@entry=0x7fffe657e1a8, addr=addr@entry=0x7fffe657e240, iov=iov@entry=0x7fffe6580240, max_num_sg=max_num_sg@entry=1024, is_write=is_write@entry=false, pa=0, sz=0)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:757
#3 0x0000555555922a89 in virtqueue_pop (vq=vq@entry=0x555556dc8660, sz=sz@entry=184)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:950
#4 0x00005555558d3eca in virtio_blk_get_request (vq=0x555556dc8660, s=0x555556dbcfb0)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:255
#5 0x00005555558d3eca in virtio_blk_handle_vq (s=0x555556dbcfb0, vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/block/virtio-blk.c:776
#6 0x000055555591dd66 in virtio_queue_notify_aio_vq (vq=vq@entry=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1550
#7 0x000055555591ecef in virtio_queue_notify_aio_vq (vq=0x555556dc8660)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:1546
#8 0x000055555591ecef in virtio_queue_host_notifier_aio_poll (opaque=0x555556dc86c8)
at /home/mdroth/w/qemu.git/hw/virtio/virtio.c:2527
#9 0x0000555555d02164 in run_poll_handlers_once (ctx=ctx@entry=0x55555688bfc0, timeout=timeout@entry=0x7fffe65844a8)
at /home/mdroth/w/qemu.git/util/aio-posix.c:520
#10 0x0000555555d02d1b in try_poll_mode (timeout=0x7fffe65844a8, ctx=0x55555688bfc0)
at /home/mdroth/w/qemu.git/util/aio-posix.c:607
#11 0x0000555555d02d1b in aio_poll (ctx=ctx@entry=0x55555688bfc0, blocking=blocking@entry=true)
at /home/mdroth/w/qemu.git/util/aio-posix.c:639
#12 0x0000555555d0004d in aio_wait_bh_oneshot (ctx=0x55555688bfc0, cb=cb@entry=0x5555558d5130 <virtio_blk_data_plane_stop_bh>, opaque=opaque@entry=0x555556de86f0)
at /home/mdroth/w/qemu.git/util/aio-wait.c:71
#13 0x00005555558d59bf in virtio_blk_data_plane_stop (vdev=<optimized out>)
at /home/mdroth/w/qemu.git/hw/block/dataplane/virtio-blk.c:288
#14 0x0000555555b906a1 in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:245
#15 0x0000555555b90dbb in virtio_bus_stop_ioeventfd (bus=bus@entry=0x555556dbcf38)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-bus.c:237
#16 0x0000555555b92a8e in virtio_pci_stop_ioeventfd (proxy=0x555556db4e40)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:292
#17 0x0000555555b92a8e in virtio_write_config (pci_dev=0x555556db4e40, address=<optimized out>, val=1048832, len=<optimized out>)
at /home/mdroth/w/qemu.git/hw/virtio/virtio-pci.c:613
I.e. the calling code is only scheduling a one-shot BH for
virtio_blk_data_plane_stop_bh, but somehow we end up trying to process
an additional virtqueue entry before we get there. This is likely due
to the following check in virtio_queue_host_notifier_aio_poll:
static bool virtio_queue_host_notifier_aio_poll(void *opaque)
{
EventNotifier *n = opaque;
VirtQueue *vq = container_of(n, VirtQueue, host_notifier);
bool progress;
if (!vq->vring.desc || virtio_queue_empty(vq)) {
return false;
}
progress = virtio_queue_notify_aio_vq(vq);
namely the call to virtio_queue_empty(). In this case, since no new
requests have actually been issued, shadow_avail_idx == last_avail_idx,
so we actually try to access the vring via vring_avail_idx() to get
the latest non-shadowed idx:
int virtio_queue_empty(VirtQueue *vq)
{
bool empty;
...
if (vq->shadow_avail_idx != vq->last_avail_idx) {
return 0;
}
rcu_read_lock();
empty = vring_avail_idx(vq) == vq->last_avail_idx;
rcu_read_unlock();
return empty;
but since the IOMMU region has been disabled we get a bogus value (0
usually), which causes virtio_queue_empty() to falsely report that
there are entries to be processed, which causes errors such as:
"virtio: zero sized buffers are not allowed"
or
"virtio-blk missing headers"
and puts the device in an error state.
This patch works around the issue by introducing virtio_set_disabled(),
which sets a 'disabled' flag to bypass checks like virtio_queue_empty()
when bus-mastering is disabled. Since we'd check this flag at all the
same sites as vdev->broken, we replace those checks with an inline
function which checks for either vdev->broken or vdev->disabled.
The 'disabled' flag is only migrated when set, which should be fairly
rare, but to maintain migration compatibility we disable it's use for
older machine types. Users requiring the use of the flag in conjunction
with older machine types can set it explicitly as a virtio-device
option.
NOTES:
- This leaves some other oddities in play, like the fact that
DRIVER_OK also gets unset in response to bus-mastering being
disabled, but not restored (however the device seems to continue
working)
- Similarly, we disable the host notifier via
virtio_bus_stop_ioeventfd(), which seems to move the handling out
of virtio-blk dataplane and back into the main IO thread, and it
ends up staying there till a reset (but otherwise continues working
normally)
Cc: David Gibson <david@gibson.dropbear.id.au>,
Cc: Alexey Kardashevskiy <aik@ozlabs.ru>
Cc: "Michael S. Tsirkin" <mst@redhat.com>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-Id: <20191120005003.27035-1-mdroth@linux.vnet.ibm.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Some guests read back queue size after writing it.
Update the size immediatly upon write otherwise
they get confused.
In particular this is the case for seabios.
Reported-by: Roman Kagan <rkagan@virtuozzo.com>
Suggested-by: Denis Plotnikov <dplotnikov@virtuozzo.com>
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Should directly read DMAR_RTADDR_REG but not using 's->root'.
Because 's->root' is modified in 'vtd_root_table_setup()' so
that the first 12 bits are omitted. This causes the guest
iommu debugfs cannot show pasid tables.
Signed-off-by: Yi Sun <yi.y.sun@linux.intel.com>
Message-Id: <20191205095439.29114-1-yi.y.sun@linux.intel.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Peter Xu <peterx@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
ivqs/ovqs/c_ivq/c_ovq is forgot to cleanup in
virtio_serial_device_unrealize, the memory leak stack is as bellow:
Direct leak of 1290240 byte(s) in 180 object(s) allocated from:
#0 0x7fc9bfc27560 in calloc (/usr/lib64/libasan.so.3+0xc7560)
#1 0x7fc9bed6f015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015)
#2 0x5650e02b83e7 in virtio_add_queue hw/virtio/virtio.c:2327
#3 0x5650e02847b5 in virtio_serial_device_realize hw/char/virtio-serial-bus.c:1089
#4 0x5650e02b56a7 in virtio_device_realize hw/virtio/virtio.c:3504
#5 0x5650e03bf031 in device_set_realized hw/core/qdev.c:876
#6 0x5650e0531efd in property_set_bool qom/object.c:2080
#7 0x5650e053650e in object_property_set_qobject qom/qom-qobject.c:26
#8 0x5650e0533e14 in object_property_set_bool qom/object.c:1338
#9 0x5650e04c0e37 in virtio_pci_realize hw/virtio/virtio-pci.c:1801
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Cc: Laurent Vivier <lvivier@redhat.com>
Cc: Amit Shah <amit@kernel.org>
Cc: "Marc-André Lureau" <marcandre.lureau@redhat.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Message-Id: <1575444716-17632-3-git-send-email-pannengyuan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
ivq/dvq/svq/free_page_vq is forgot to cleanup in
virtio_balloon_device_unrealize, the memory leak stack is as follow:
Direct leak of 14336 byte(s) in 2 object(s) allocated from:
#0 0x7f99fd9d8560 in calloc (/usr/lib64/libasan.so.3+0xc7560)
#1 0x7f99fcb20015 in g_malloc0 (/usr/lib64/libglib-2.0.so.0+0x50015)
#2 0x557d90638437 in virtio_add_queue hw/virtio/virtio.c:2327
#3 0x557d9064401d in virtio_balloon_device_realize hw/virtio/virtio-balloon.c:793
#4 0x557d906356f7 in virtio_device_realize hw/virtio/virtio.c:3504
#5 0x557d9073f081 in device_set_realized hw/core/qdev.c:876
#6 0x557d908b1f4d in property_set_bool qom/object.c:2080
#7 0x557d908b655e in object_property_set_qobject qom/qom-qobject.c:26
Reported-by: Euler Robot <euler.robot@huawei.com>
Signed-off-by: Pan Nengyuan <pannengyuan@huawei.com>
Message-Id: <1575444716-17632-2-git-send-email-pannengyuan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Let's make sure calling this twice is harmless -
no known instances, but seems safer.
Suggested-by: Pan Nengyuan <pannengyuan@huawei.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Devices tend to maintain vq pointers, allow deleting them trough a vq pointer.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
-----BEGIN PGP SIGNATURE-----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=laVP
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/kevin/tags/for-upstream' into staging
Block layer patches:
- qemu-img: fix info --backing-chain --image-opts
- Error out on image creation with conflicting size options
- Fix external snapshot with VM state
- hmp: Allow using qdev ID for qemu-io command
- Misc code cleanup
- Many iotests improvements
# gpg: Signature made Thu 19 Dec 2019 17:23:11 GMT
# gpg: using RSA key 7F09B272C88F2FD6
# gpg: Good signature from "Kevin Wolf <kwolf@redhat.com>" [full]
# Primary key fingerprint: DC3D EB15 9A9A F95D 3D74 56FE 7F09 B272 C88F 2FD6
* remotes/kevin/tags/for-upstream: (30 commits)
iotests: Test external snapshot with VM state
hmp: Allow using qdev ID for qemu-io command
block: Activate recursively even for already active nodes
iotests: 211: Remove duplication with VM.blockdev_create()
iotests: 207: Remove duplication with VM.blockdev_create()
iotests: 266: Convert to VM.blockdev_create()
iotests: 237: Convert to VM.blockdev_create()
iotests: 213: Convert to VM.blockdev_create()
iotests: 212: Convert to VM.blockdev_create()
iotests: 210: Convert to VM.blockdev_create()
iotests: 206: Convert to VM.blockdev_create()
iotests: 255: Drop blockdev_create()
iotests: Create VM.blockdev_create()
qcow2: Move error check of local_err near its assignment
iotests: Fix IMGOPTSSYNTAX for nbd
iotests/273: Filter format-specific information
iotests: Add more "_require_drivers" checks to the shell-based tests
MAINTAINERS: fix qcow2-bitmap.c under Dirty Bitmaps header
qcow2: Use offset_into_cluster()
iotests: Support job-complete in run_job()
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEZoWumedRZ7yvyN81+9DbCVqeKkQFAl37M6gACgkQ+9DbCVqe
KkQ0Rwf/d0lGDPQN1Uf0zqZRQQmDCqWVuqHhZJ5xWDjbyVT2eUwR07TvNZeUKEWX
iO+u6S7Tv91oLjZN5WjhaiuSjtJaEzCdcpkIJAWXLP/lzse37HEwvLBsdg71y+46
LNvBrJRPpQotdb7fjr8RgCwc1qg2Bz15ekSn7XIA175zTMmUsshLJBVhLbGNqrVm
F2UmjB9oFJ0+nzrcEnpFmWw7xvVrX1dImZXv5C2pvuHF7efSjGwiFviTRZgDjOGs
V7HiWRV1QcgTigncncxTMbhMTKTVKK+e7O+y0DZWt/NSrT/yLDy5rcwySpmvu6C+
cRmh/0tMo1KAhiz8Xy8LookhVj6hdA==
=OAkV
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stsquad/tags/pull-tesing-and-misc-191219-1' into staging
Various testing and logging updates
- test tci with Travis
- enable multiarch testing in Travis
- default to out-of-tree builds
- make changing logfile safe via RCU
- remove redundant tests
- remove gtester test from docker
- convert DEBUG_MMAP to tracepoints
- remove hand rolled glob function
- trigger tcg re-configure when needed
# gpg: Signature made Thu 19 Dec 2019 08:24:08 GMT
# gpg: using RSA key 6685AE99E75167BCAFC8DF35FBD0DB095A9E2A44
# gpg: Good signature from "Alex Bennée (Master Work Key) <alex.bennee@linaro.org>" [full]
# Primary key fingerprint: 6685 AE99 E751 67BC AFC8 DF35 FBD0 DB09 5A9E 2A44
* remotes/stsquad/tags/pull-tesing-and-misc-191219-1: (25 commits)
tests/tcg: ensure we re-configure if configure.sh is updated
trace: replace hand-crafted pattern_glob with g_pattern_match_simple
linux-user: convert target_munmap debug to a tracepoint
linux-user: log page table changes under -d page
linux-user: add target_mmap_complete tracepoint
linux-user: convert target_mmap debug to tracepoint
linux-user: convert target_mprotect debug to tracepoint
travis.yml: Remove the redundant clang-with-MAIN_SOFTMMU_TARGETS entry
docker: gtester is no longer used
Added tests for close and change of logfile.
Add use of RCU for qemu_logfile.
qemu_log_lock/unlock now preserves the qemu_logfile handle.
Add a mutex to guarantee single writer to qemu_logfile handle.
Cleaned up flow of code in qemu_set_log(), to simplify and clarify.
Fix double free issue in qemu_set_log_filename().
ci: build out-of-tree
travis.yml: Enable builds on arm64, ppc64le and s390x
tests/test-util-filemonitor: Skip test on non-x86 Travis containers
tests/hd-geo-test: Skip test when images can not be created
iotests: Skip test 079 if it is not possible to create large files
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Update to the final 1.13 release. No code changes.
git shortlog
============
Kevin O'Connor (1):
docs: Note v1.13.0 release
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This tests creating an external snapshot with VM state (which results in
an active overlay over an inactive backing file, which is also the root
node of an inactive BlockBackend), re-activating the images and
performing some operations to test that the re-activation worked as
intended.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
In order to issue requests on an existing BlockBackend with the
'qemu-io' HMP command, allow specifying the BlockBackend not only with a
BlockBackend name, but also with a qdev ID/QOM path for a device that
owns the (possibly anonymous) BlockBackend.
Because qdev names could be conflicting with BlockBackend and node
names, introduce a -d option to explicitly address a device. If the
option is not given, a BlockBackend or a node is addressed.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
bdrv_invalidate_cache_all() assumes that all nodes in a given subtree
are either active or inactive when it starts. Therefore, as soon as it
arrives at an already active node, it stops.
However, this assumption is wrong. For example, it's possible to take a
snapshot of an inactive node, which results in an active overlay over an
inactive backing file. The active overlay is probably also the root node
of an inactive BlockBackend (blk->disable_perm == true).
In this case, bdrv_invalidate_cache_all() does not need to do anything
to activate the overlay node, but it still needs to recurse into the
children and the parents to make sure that after returning success,
really everything is activated.
Cc: qemu-stable@nongnu.org
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Max Reitz <mreitz@redhat.com>
When the number of a virtio-blk device's virtqueues is larger than
BITS_PER_LONG, the out-of-bounds access to bitmap[ ] will occur.
Fixes: e21737ab15 ("virtio-blk: multiqueue batch notify")
Cc: qemu-stable@nongnu.org
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Li Hangjing <lihangjing@baidu.com>
Reviewed-by: Xie Yongji <xieyongji@baidu.com>
Reviewed-by: Chai Wen <chaiwen@baidu.com>
Message-id: 20191216023050.48620-1-lihangjing@baidu.com
Message-Id: <20191216023050.48620-1-lihangjing@baidu.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The .rst files outside docs/{devel,interop,specs} aren't built yet and
therefore a few syntax errors have slipped through. Fix them.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Daniel P. Berrangé <berrange@redhat.com>
Message-Id: <20191111094411.427174-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The Linux virtio_blk.ko guest driver is removing legacy SCSI passthrough
support. Deprecate this feature in QEMU too.
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Thomas Huth <thuth@redhat.com>
Message-id: 20191213144626.1208237-1-stefanha@redhat.com
Message-Id: <20191213144626.1208237-1-stefanha@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
The blockdev_create() function in this test case adds an error check
that skips the test in case of failure because of memory shortage, but
provides otherwise the same functionality as VM.blockdev_create() from
iotests.py. Make it a thin wrapper around the iotests.py function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
The blockdev_create() function in this test case adds another filter to
the logging, but provides otherwise the same functionality as
VM.blockdev_create() from iotests.py. Make it a thin wrapper around the
iotests.py function.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Instead of having a separate blockdev_create() function, make use of the
VM.blockdev_create() offered by iotests.py.
Signed-off-by: Kevin Wolf <kwolf@redhat.com>
