img_convert() and img_amend() use qemu_opts_do_parse(), which reports
errors with qerror_report_err(). Its error messages aren't helpful
here, the caller reports one that actually makes sense. Reproducer:
$ qemu-img convert -o backing_format=raw in.img out.img
qemu-img: Invalid parameter 'backing_format'
qemu-img: Invalid options for file format 'raw'
To fix, propagate errors through qemu_opts_do_parse(). This lifts the
error reporting into callers. Drop it from img_convert() and
img_amend(), keep it in qemu_chr_parse_compat(), bdrv_img_create().
Since I'm touching qemu_opts_do_parse() anyway, write a function
comment for it.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qemu_opt_set() is a wrapper around qemu_opt_set() that reports the
error with qerror_report_err().
Most of its users assume the function can't fail. Make them use
qemu_opt_set_err() with &error_abort, so that should the assumption
ever break, it'll break noisily.
Just two users remain, in util/qemu-config.c. Switch them to
qemu_opt_set_err() as well, then rename qemu_opt_set_err() to
qemu_opt_set().
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
qerror_report_err() is a transitional interface to help with
converting existing monitor commands to QMP. It should not be used
elsewhere. Replace by error_report_err() in legacy chardev parser
qemu_chr_parse_compat(). Legacy chardev syntax is not to be used in
QMP.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
The monitor's auto-completion feature stopped working when stdio is used
as an input and qemu was resumed after it was suspended (using ctrl-z).
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Gonglei <arei.gonglei@huawei.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
tcp_get_fds API discards fds if there's more than 1 of these.
It's tricky to fix this without API changes in the generic case.
However, this API is only used by tests ATM, and tests know how
many fds they expect.
So let's not waste cycles trying to fix this properly:
simply assume at most 16 fds (tests use at most 8 now).
assert if some test tries to get more.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If reconnect was set, errors wouldn't always be reported.
Fix that and also only report a connect error once until a
connection has been made.
The primary purpose of this is to tell the user that a
connection failed so they can know they need to figure out
what went wrong. So we don't want to spew too much
out here, just enough so they know.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
An error value here would be quite handy and more consistent
with the rest of the code.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
[Make sure SO_ERROR value is passed to error_setg_errno. - Paolo]
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
It seems that it might be a good idea to know what is at the remote
end of a socket for tracking down issues. So add that to the
socket filename.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Adds a "reconnect" option to socket backends that gives a reconnect
timeout. This only applies to client sockets. If the other end
of a socket closes the connection, qemu will attempt to reconnect
after the given number of seconds.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This way we can tell if the socket is connected or not. It also splits
the string conversions out into separate functions to make this more
convenient.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
This keeps them from having to be passed around and makes them
available for later functions, like printing and reconnecting.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Move all socket configuration to qmp_chardev_open_socket().
qemu_chr_open_socket_fd() just opens the socket. This is getting ready
for the reconnect code, which will call open_sock_fd() on a reconnect
attempt.
Signed-off-by: Corey Minyard <cminyard@mvista.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
When more than one is used, the terminal settings aren't restored
correctly on exit. Fixable. However, such usage makes no sense,
because the users race for input, so outlaw it instead.
If you want to connect multiple things to stdio, use the mux
chardev.
Signed-off-by: Li Liu <john.liuli@huawei.com>
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Now we have removed the legacy register_char_driver() we can
rename register_char_driver_qapi() to the more obvious and
shorter name.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-6-git-send-email-peter.maydell@linaro.org
Now that all the char backends have been converted to the QAPI
framework we can remove the machinery for handling old style
backends.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-5-git-send-email-peter.maydell@linaro.org
Convert the socket char backend to the new style QAPI framework;
this allows it to return an Error ** to callers who might not
want it to print directly about socket failures.
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1409653457-27863-2-git-send-email-peter.maydell@linaro.org
When trying to print data to the pty, we first check if it is connected.
If not, we try to reconnect, but we drop the pending data even if we
have successfully reconnected; this makes us lose the first byte of the very
first transmission.
This small fix addresses the issue by checking once more if the pty is connected
after having tried to reconnect.
Signed-off-by: Sebastian Tanase <sebastian.tanase@openwide.fr>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJT7j2XAAoJEJykq7OBq3PIUL4H/11PwoUewF5hXqbsaTVbxLWK
RdufFsy+31+FjM2JaGbJnGyuzRFOevx3SLllnASkltsC7AV+MlQw0qDfQ9MSvsT4
wotQKEfwApleq7u4wp/zTCyNCDRyPTvIDboG2NB/BqHMjsaar2EX3yacSZ+Bv+WJ
cj2OOK9OlHHy0fycx9POgx3RB+OSNvzPcJ2DaNMuDY/0/ss5i6r2aQOT5bgHFTNU
JCAGYB1MJ1dMBqHnfWdsBHXTliPnYoGyYGTLcE2lHO9VBj1hOw867Iemz9mNLWg5
LTWHLnYZLiUZIzGWlBrtnv4lgLsu2xtZCBuiMgDfl6zZtFhIR36SA1M8pdS2yMA=
=3PII
-----END PGP SIGNATURE-----
Merge remote-tracking branch 'remotes/stefanha/tags/block-pull-request' into staging
Block pull request
# gpg: Signature made Fri 15 Aug 2014 18:04:23 BST using RSA key ID 81AB73C8
# gpg: Good signature from "Stefan Hajnoczi <stefanha@redhat.com>"
# gpg: aka "Stefan Hajnoczi <stefanha@gmail.com>"
* remotes/stefanha/tags/block-pull-request: (55 commits)
qcow2: fix new_blocks double-free in alloc_refcount_block()
image-fuzzer: Reduce number of generator functions in __init__
image-fuzzer: Add generators of L1/L2 tables
image-fuzzer: Add fuzzing functions for L1/L2 table entries
docs: Expand the list of supported image elements with L1/L2 tables
image-fuzzer: Public API for image-fuzzer/runner/runner.py
image-fuzzer: Generator of fuzzed qcow2 images
image-fuzzer: Fuzzing functions for qcow2 images
image-fuzzer: Tool for fuzz tests execution
docs: Specification for the image fuzzer
ide: only constrain read/write requests to drive size, not other types
virtio-blk: Correct bug in support for flexible descriptor layout
libqos: Change free function called in malloc
libqos: Correct mask to align size to PAGE_SIZE in malloc-pc
libqtest: add QTEST_LOG for debugging qtest testcases
ide: Fix segfault when flushing a device that doesn't exist
qemu-options: add missing -drive discard option to cmdline help
parallels: 2TB+ parallels images support
parallels: split check for parallels format in parallels_open
parallels: replace tabs with spaces in block/parallels.c
...
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Technically, fcntl(soc, F_SETFL, O_NONBLOCK)
is incorrect since it clobbers all other file flags.
We can use F_GETFL to get the current flags, set or
clear the O_NONBLOCK flag, then use F_SETFL to set the flags.
Using the qemu_set_nonblock() wrapper.
Signed-off-by: Wangxin <wangxinxin.wang@huawei.com>
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
imitate nearby code about using '!value' or 'value == NULL'
Signed-off-by: Gonglei <arei.gonglei@huawei.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
From: Paolo Bonzini <pbonzini@redhat.com>
chr-testdev enables a virtio serial channel to be used for guest
initiated qemu exits. hw/misc/debugexit already enables guest
initiated qemu exits, but only for PC targets. chr-testdev supports
any virtio-capable target. kvm-unit-tests/arm is already making use
of this backend.
Currently there is a single command implemented, "q". It takes a
(prefix) argument for the exit code, thus an exit is implemented by
writing, e.g. "1q", to the virtio-serial port.
It can be used as:
$QEMU ... \
-device virtio-serial-device \
-device virtserialport,chardev=ctd -chardev testdev,id=ctd
or, use:
$QEMU ... \
-device virtio-serial-device \
-device virtconsole,chardev=ctd -chardev testdev,id=ctd
to bind it to virtio-serial port0.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
After commit f702e62 (serial: change retry logic to avoid concurrency,
2014-07-11), guest boot hangs if the backend is an unconnected PTY.
The reason is that PTYs do not support G_IO_HUP, and serial_xmit is
never called. To fix this, simply invoke serial_xmit immediately
(via g_idle_source_new) when this happens.
Tested-by: Pavel Hrdina <phrdina@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
qemu_chr_be_generic_open cannot be called with the write lock taken,
because it calls client code that may call qemu_chr_fe_write. This
actually happens for the monitor:
0x00007ffff27dbf79 in __GI_raise (sig=sig@entry=6)
0x00007ffff27df388 in __GI_abort ()
0x00005555555ef489 in error_exit (err=<optimized out>, msg=msg@entry=0x5555559796d0 <__func__.5959> "qemu_mutex_lock")
0x00005555558f9080 in qemu_mutex_lock (mutex=mutex@entry=0x555556248a30)
0x0000555555713936 in qemu_chr_fe_write (s=0x555556248a30, buf=buf@entry=0x5555563d8870 "QEMU 2.0.90 monitor - type 'help' for more information\r\n", len=56)
0x00005555556217fd in monitor_flush_locked (mon=mon@entry=0x555556251fd0)
0x0000555555621a12 in monitor_flush_locked (mon=0x555556251fd0)
monitor_puts (mon=mon@entry=0x555556251fd0, str=0x55555634bfa7 "", str@entry=0x55555634bf70 "QEMU 2.0.90 monitor - type 'help' for more information\n")
0x0000555555624359 in monitor_vprintf (mon=0x555556251fd0, fmt=<optimized out>, ap=<optimized out>)
0x0000555555624414 in monitor_printf (mon=<optimized out>, fmt=fmt@entry=0x5555559105a0 "QEMU %s monitor - type 'help' for more information\n")
0x0000555555629806 in monitor_event (opaque=0x555556251fd0, event=<optimized out>)
0x000055555571343c in qemu_chr_be_generic_open (s=0x555556248a30)
To avoid this, defer the call to an idle callback, which will be
called as soon as the main loop is re-entered. In order to simplify
the cleanup and do it in one place only, change pty_chr_close to
call pty_chr_state.
To reproduce, run with "-monitor pty", then try to read from the
slave /dev/pts/FOO that it creates.
Fixes: 9005b2a758
Reported-by: Li Liang <liangx.z.li@intel.com>
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Forward chr_add_watch call from mux chardev to underlying
implementation.
This should fix bug #1335444
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Since commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev")
GLib limitation results in a bug on Windows host. Steps to reproduce:
Start qemu: qemu-system-i386 -qmp tcp:127.0.0.1:4444:server:nowait
Connect with telnet: telnet 127.0.0.1 4444
Try sending some data from telnet.
Expected result: answers from QEMU.
Observed result: no answers (actually tcp_chr_read is not called at all).
Due to GLib limitations it is not possible to create several watches on one
channel on Windows hosts. See bug #338943 in GNOME bugzilla for details:
https://bugzilla.gnome.org/show_bug.cgi?id=338943
This reimplements commit cdaa86a54b
("Add G_IO_HUP handler for socket chardev") using a single watch:
Handle G_IO_HUP in tcp_chr_read instead. It is already watched by a
corresponding watch. Remove the second watch with its handler.
Cc: Antonios Motakis <a.motakis@virtualopensystems.com>
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Kirill Batuzov <batuzovk@ispras.ru>
Signed-off-by: Nikita Belov <zodiac@ispras.ru>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
In addition to the on-line reporting added in the previous patch, allow
libvirt to query frontend state independently of events.
Libvirt's path to identify the guest agent channel it cares about differs
between the event added in the previous patch and the QMP response field
added here. The event identifies the frontend device, by "id". The
'query-chardev' QMP command identifies the backend device (again by "id").
The association is under libvirt's control.
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1080376
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Otherwise, Windows fails with a deadlock.
Reported-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1403679897-11480-1-git-send-email-pbonzini@redhat.com
Tested-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Message-id: 1403683241-20678-1-git-send-email-imammedo@redhat.com
Reviewed-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Stefan Weil <sw@weilnetz.de>
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This will let threads other than the I/O thread raise QMP events.
GIOChannel is thread-safe, and send and receive state is usually
well-separated. The only driver that requires some care is the
pty driver, where some of the state is shared by the read and write
sides. That state is protected with the chr_write_lock too.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Make the mux always go through qemu_chr_fe_write, so that we'll get
the mutex for the underlying chardev.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
The next patch will modify this function to initialize state that is
common to all backends.
Reviewed-by: Fam Zheng <famz@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Commit c76bf6bb8f ("Add chardev API
qemu_chr_fe_get_msgfds") extended the get_msgfds API from one to
multiple file descriptors. It forgot to close unused file descriptors
before freeing the file descriptor array.
This patch prevents a file descriptor leak if the tcp_get_msgfds()
callers requests fewer file descriptors than are available.
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Commit c76bf6bb8f ("Add chardev API
qemu_chr_fe_get_msgfds") broke qemu_chr_fe_get_msgfd() because it
changed the return value.
Callers expect -1 if no fd is available. The commit changed the return
value to 0 (which is a valid file descriptor number) so callers always
detected a file descriptor even if none was available.
This patch fixes qemu-iotests 045:
$ cd tests/qemu-iotests && ./check 045
[...]
+FAIL: test_add_fd_invalid_fd (__main__.TestFdSets)
+----------------------------------------------------------------------
+Traceback (most recent call last):
+ File "./045", line 123, in test_add_fd_invalid_fd
+ self.assert_qmp(result, 'error/class', 'GenericError')
+ File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 232, in assert_qmp
+ result = self.dictpath(d, path)
+ File "/home/stefanha/qemu/tests/qemu-iotests/iotests.py", line 211, in dictpath
+ self.fail('failed path traversal for "%s" in "%s"' % (path, str(d)))
+AssertionError: failed path traversal for "error/class" in "{u'return': {u'fdset-id': 2, u'fd': 0}}"
Cc: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
move generic chardev APIs to sysemu/char.h, to make them available to
callers which can not depend on the whole of ui/console.h.
This fixes a build error on systems without pixman-devel:
./configure --disable-tools --disable-docs --target-list=arm-linux-user
...
pixman none
...
make
...
In file included from
/data/home/nchip/linaro/qemu/include/ui/console.h:4:0,
from /data/home/nchip/linaro/qemu/stubs/vc-init.c:2:
/data/home/nchip/linaro/qemu/include/ui/qemu-pixman.h:14:20: fatal
error: pixman.h: No such file or directory
#include <pixman.h>
^
compilation terminated.
Reported-by: Riku Voipio <riku.voipio@iki.fi>
Tested-by: Riku Voipio <riku.voipio@iki.fi>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Message-id: 1403508500-32691-1-git-send-email-mst@redhat.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
This is used to detect that the remote end has disconnected. Just call
tcp_char_disconnect on receiving this event.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This extends the existing qemu_chr_fe_get_msgfd by allowing to read a set
of fds. The function for receiving the fds - unix_process_msgfd is extended
to allocate the needed array size.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This will set an array of file descriptors to the internal structures.
The next time a message is send the array will be send as ancillary
data. This feature works on the UNIX domain socket backend only.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
This function will attempt to read data from the chardev trying
to fill the buffer up to the given length.
Add tcp_chr_disconnect to reuse disconnection code where needed.
Signed-off-by: Antonios Motakis <a.motakis@virtualopensystems.com>
Signed-off-by: Nikolay Nikolaev <n.nikolaev@virtualopensystems.com>
Reviewed-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
When trying to use a ivshmem server with qemu, ivshmem init code tries to
create a CharDriverState object for each eventfd retrieved from the server.
To create this object, a call to qemu_chr_open_eventfd() is done.
Right after this, before adding a frontend, qemu_chr_fe_claim_no_fail() is
called.
qemu_chr_open_eventfd() does not set avail_connections to 1, so no frontend can
be associated because qemu_chr_fe_claim_no_fail() makes qemu stop right away.
This problem comes from 456d606923
"qemu-char: Call fe_claim / fe_release when not using qdev chr properties".
Fix this, by setting avail_connections to 1 in qemu_chr_open_eventfd().
Signed-off-by: David Marchand <david.marchand@6wind.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Export chr_is_ringbuf() function. Also remove left-over function prototypes
while at it.
Signed-off-by: Hani Benhabiles <hani@linux.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Character backend open hasn't been fully converted to the Error API.
Some opens fail without setting an error. qmp_chardev_add() needs to
detect when that happens, and set a generic error. Explain that in a
comment, and inline error_is_set() for clarity.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using error_is_set(ERRP) to find out whether a function failed is
either wrong, fragile, or unnecessarily opaque. It's wrong when ERRP
may be null, because errors go undetected when it is. It's fragile
when proving ERRP non-null involves a non-local argument. Else, it's
unnecessarily opaque (see commit 84d18f0).
The error_is_set(errp) in qemu_chr_new_from_opts() is merely fragile,
because the callers never pass a null errp argument.
Make the code more robust and more obviously correct: receive the
error in a local variable, then propagate it through the parameter.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Using error_is_set(errp) to check whether a function call failed is
fragile: it breaks when errp is null. Check perfectly suitable return
values instead when possible. As far as I can tell, errp can't be
null there, but this is more robust and more obviously correct
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fix a bug that was introduced in commit 386a5a1e. A removal of a device
set the chr handlers to NULL. However when the device is plugged back,
its read callback is not restored so data can't be transferred from the
host to the guest (e.g. via the virtio-serial port).
https://bugzilla.redhat.com/show_bug.cgi?id=1027181
Signed-off-by: Gal Hammer <ghammer@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Introduce 'query-chardev-backends' QMP command which lists all
supported character device backends.
Signed-off-by: Martin Kletzander <mkletzan@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
error_is_set(&var) is the same as var != NULL, but it takes
whole-program analysis to figure that out. Unnecessarily hard for
optimizers, static checkers, and human readers. Dumb it down to
obvious.
Gets rid of several dozen Coverity false positives.
Note that the obvious form is already used in many places.
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
This improves readability and simplifies the code.
Cc: Anthony Liguori <aliguori@amazon.com>
Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Teach the chardev frontend to send event. This is used by the Spice port
chardev currently.
Signed-off-by: Marc-André Lureau <marcandre.lureau@redhat.com>
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
# By Amit Shah
# Via Amit Shah
* amit/char-remove-watch-on-unplug:
char: remove watch callback on chardev detach from frontend
char: use common function to disable callbacks on chardev close
char: move backends' io watch tag to CharDriverState
Message-id: 20131004154802.GA25646@grmbl.mre
Signed-off-by: Anthony Liguori <aliguori@amazon.com>
# By Stefan Weil (5) and others
# Via Michael Tokarev
* mjt/trivial-patches:
migration: Fix compiler warning ('caps' may be used uninitialized)
util/path: Fix type which is longer than 8 bit for MinGW
hw/9pfs: Fix errno value for xattr functions
vl: Clean up unnecessary boot_order complications
qemu-char: Fix potential out of bounds access to local arrays
pci-ohci: Add missing 'break' in ohci_service_td
sh4: Fix serial line access for Linux kernels later than 3.2
hw/alpha: Fix compiler warning (integer constant is too large)
target-i386: Fix compiler warning (integer constant is too large)
block: Remove unused assignment (fixes warning from clang)
exec: cleanup DEBUG_SUBPAGE
tests: Fix schema parser test for in-tree build
tests: Update .gitignore for test-int128 and test-bitops
.gitignore: ignore tests/qemu-iotests/socket_scm_helper
Message-id: 1381051979-25742-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
Latest gcc-4.8 supports a new option -fsanitize=address which activates
an AddressSanitizer. This AddressSanitizer stops the QEMU system emulation
very early because two character arrays of size 8 are potentially written
with 9 bytes.
Commit 6ea314d914 added the code.
There is no obvious reason why width or height could need 8 characters,
so reduce it to 7 characters which together with the terminating '\0'
fit into the arrays.
Cc: qemu-stable <qemu-stable@nongnu.org>
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Reviewed-by: Alex Bennée <alex@bennee.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
pty_chr_timer first calls pty_chr_update_read_handler(), then clears
timer_tag (because it is a one-shot timer). This is the wrong order
though. pty_chr_update_read_handler might re-arm time timer, and the
new timer_tag gets overwitten in that case.
This leads to crashes when unplugging a pty chardev: pty_chr_close
thinks no timer is running -> timer isn't canceled -> pty_chr_timer gets
called with stale CharDevState -> BOOM.
This patch fixes the ordering.
Kill the pointless goto while being at it.
https://bugzilla.redhat.com/show_bug.cgi?id=994414
Cc: qemu-stable@nongnu.org
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
If a frontend device releases the chardev (via unplug), the chr handlers
are set to NULL via qdev's exit callbacks invoking
qemu_chr_add_handlers(). If the chardev had a pending operation, a
callback will be invoked, which will try to access data in the
just-released frontend, causing a segfault.
Ensure the callbacks are disabled when frontends release chardevs.
This was seen when a virtio-serial port was unplugged when heavy
guest->host IO was in progress (causing a callback to be registered).
In the window in which the throttling was active, unplugging ports
caused a qemu segfault.
https://bugzilla.redhat.com/show_bug.cgi?id=985205
CC: <qemu-stable@nongnu.org>
Reported-by: Sibiao Luo <sluo@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
This deduplicates code used a lot of times.
CC: <qemu-stable@nongnu.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
All the backends implement an io watcher tag for callbacks. Move it to
CharDriverState from each backend's struct to make accessing the tag from
backend-neutral functions easier.
This will be used later to cancel a callback on chardev detach from a
frontend.
CC: <qemu-stable@nongnu.org>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Signed-off-by: Amit Shah <amit.shah@redhat.com>
# By Alex Bligh (32) and others
# Via Stefan Hajnoczi
* stefanha/block: (42 commits)
win32-aio: drop win32_aio_flush_cb()
aio-win32: replace incorrect AioHandler->opaque usage with ->e
aio / timers: remove dummy_io_handler_flush from tests/test-aio.c
aio / timers: Remove legacy interface
aio / timers: Switch entire codebase to the new timer API
aio / timers: Add scripts/switch-timer-api
aio / timers: Add test harness for AioContext timers
aio / timers: convert block_job_sleep_ns and co_sleep_ns to new API
aio / timers: Convert rtc_clock to be a QEMUClockType
aio / timers: Remove main_loop_timerlist
aio / timers: Rearrange timer.h & make legacy functions call non-legacy
aio / timers: Add qemu_clock_get_ms and qemu_clock_get_ms
aio / timers: Remove legacy qemu_clock_deadline & qemu_timerlist_deadline
aio / timers: Remove alarm timers
aio / timers: Add documentation and new format calls
aio / timers: Use all timerlists in icount warp calculations
aio / timers: Introduce new API timer_new and friends
aio / timers: On timer modification, qemu_notify or aio_notify
aio / timers: Convert mainloop to use timeout
aio / timers: Convert aio_poll to use AioContext timers' deadline
...
Message-id: 1377202298-22896-1-git-send-email-stefanha@redhat.com
Signed-off-by: Anthony Liguori <anthony@codemonkey.ws>
This is an autogenerated patch using scripts/switch-timer-api.
Switch the entire code base to using the new timer API.
Note this patch may introduce some line length issues.
Signed-off-by: Alex Bligh <alex@alex.org.uk>
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>
Convert stderr messages calling error_get_pretty()
to error_report().
Timestamp is prepended by -msg timstamp option with it.
Per Markus's comment below, A conversion from fprintf() to
error_report() is always an improvement, regardless of
error_get_pretty().
http://marc.info/?l=qemu-devel&m=137513283408601&w=2
But, it is not reasonable to convert them at one time
because fprintf() is used everwhere in qemu.
So, it should be done step by step with avoiding regression.
Signed-off-by: Seiji Aguchi <seiji.aguchi@hds.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
Since commit bd5c51e (qemu-char: don't issue CHR_EVENT_OPEN in a BH), an
infinite recursion occurs when putting the monitor on a pty (-monitor
pty) and connecting a terminal to the slave port.
This is because of the qemu_chr_be_event(s, CHR_EVENT_OPENED) added to
qemu_chr_be_generic_open(). This event is captured by monitor_event()
which prints a welcome message to the character device. The flush of
that welcome message retriggers another open event in pty_chr_state()
because it checks s->connected, but only sets it to 1 after calling
qemu_chr_be_generic_open().
I've fixed this by setting s->connected = 1 before the call to
qemu_chr_be_generic_open() instead of after, so that the recursive
pty_chr_state() doesn't call it again.
An example snippet of repeating backtrace:
...
#107486 0x007aec58 in monitor_flush (mon=0xf418b0) at qemu/monitor.c:288
#107487 0x007aee7c in monitor_puts (mon=0xf418b0, str=0x1176d07 "") at qemu/monitor.c:322
#107488 0x007aef20 in monitor_vprintf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n",
ap=0x7f432be0) at qemu/monitor.c:339
#107489 0x007aefac in monitor_printf (mon=0xf418b0, fmt=0x8d4820 "QEMU %s monitor - type 'help' for more information\n")
at qemu/monitor.c:347
#107490 0x007ba4bc in monitor_event (opaque=0xf418b0, event=2) at qemu/monitor.c:4699
#107491 0x00684c28 in qemu_chr_be_event (s=0xf37788, event=2) at qemu/qemu-char.c:108
#107492 0x00684c70 in qemu_chr_be_generic_open (s=0xf37788) at qemu/qemu-char.c:113
#107493 0x006880a4 in pty_chr_state (chr=0xf37788, connected=1) at qemu/qemu-char.c:1145
#107494 0x00687fa4 in pty_chr_update_read_handler (chr=0xf37788) at qemu/qemu-char.c:1121
#107495 0x00687c9c in pty_chr_write (chr=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720)
at qemu/qemu-char.c:1063
#107496 0x00684cc4 in qemu_chr_fe_write (s=0xf37788, buf=0x70b3c008 <Address 0x70b3c008 out of bounds>, len=538720)
at qemu/qemu-char.c:118
...
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Tested-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375960178-10882-1-git-send-email-james.hogan@imgtec.com
Cc: Michael Roth <mdroth@linux.vnet.ibm.com>
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
As of bd5c51ee6c, chardevs no longer use
bottom-halves to issue CHR_EVENT_OPENED events. To maintain past
semantics, we instead defer the CHR_EVENT_OPENED events toward the end
of chardev initialization.
For muxes, this isn't good enough, since a range of FEs must be able
to attach to the mux prior to any CHR_EVENT_OPENED being issued, else
each FE will immediately print it's initial output (prompts, banners,
etc.) just prior to us switching to the next FE as part of
initialization.
The is new and confusing behavior for users, as they'll see output for
things like the HMP monitor, even though their the current mux focus
may be a guest serial port with potentially no output.
We fix this by further deferring CHR_EVENT_OPENED events for FEs
associated with muxes until after machine init by flagging mux chardevs
with 'explicit_be_open', which suppresses emission of CHR_EVENT_OPENED
events until we explicitly set the mux as opened later.
Currently, we must defer till after machine init since we potentially
associate FEs with muxes as part of realize (for instance,
serial_isa_realizefn).
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1375207462-8141-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 1da48c6 called the new member "memory" after commit 3949e59
standardized "ringbuf". Rename for consistency.
However, member name "memory" is visible in QMP since 1.5. It's
undocumented just like the driver name. Keep it working anyway.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-4-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The driver is new in 1.4, with the documented name "ringbuf".
However, it's actual name is the completely undocumented "memory".
Screwed up in commit 3949e59. Fix code to match documentation.
Keep the undocumented name working as an alias for compatibility.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-3-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This reverts commit 6a85e60cb9.
Commit 51767e7 "qemu-char: Add new char backend CirMemCharDriver"
introduced a memory ring buffer character device driver named
"memory". Commit 3949e59 "qemu-char: Saner naming of memchar stuff &
doc fixes" changed the driver name to "ringbuf", along with a whole
bunch of other names, with the following rationale:
Naming is a mess. The code calls the device driver
CirMemCharDriver, the public API calls it "memory", "memchardev",
or "memchar", and the special commands are named like
"memchar-FOO". "memory" is a particularly unfortunate choice,
because there's another character device driver called
MemoryDriver. Moreover, the device's distinctive property is that
it's a ring buffer, not that's in memory.
This is what we released in 1.4.0.
Unfortunately, the rename missed a critical instance of "memory": the
actual driver name. Thus, the new device could be used only by an
entirely undocumented name. The documented name did not work.
Bummer.
Commit 6a85e60 fixes this by changing the documentation to match the
code. It also changes some, but not all related occurences of
"ringbuf" to "memory". Left alone are identifiers in C code, HMP and
QMP commands. The latter are external interface, so they can't be
changed.
The result is an inconsistent mess. Moreover, "memory" is a rotten
name. The device's distinctive property is that it's a ring buffer,
not that's in memory. User's don't care whether it's in RAM, flash,
or carved into chocolate tablets by Oompa Loompas.
Revert the commit. Next commit will fix just the bug.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1374849874-25531-2-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
The g_io_channel_write_chars() documentation states,
bytes_written: The number of bytes written. This can be nonzero even if
the return value is not G_IO_STATUS_NORMAL. [...]
io_channel_send() could lose such bytes before.
Furthermore, the (status == G_IO_STATUS_EOF) condition used to evaluate to
constant false whenever it was reached. When that condition actually held,
it always led to -1 / EINVAL. This patch (almost) distinguishes
G_IO_STATUS_EOF only when no bytes have been written, and then treats it
as an error.
Signed-off-by: Laszlo Ersek <lersek@redhat.com>
Reviewed-by: Amit Shah <amit.shah@redhat.com>
Reviewed-by: Anthony Liguori <aliguori@us.ibm.com>
Message-id: 1373998781-29561-2-git-send-email-lersek@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Any attempt to use it trips an "opt->desc->type == QEMU_OPT_NUMBER"
assertion. Broken in commit 1da48c65.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Signed-off-by: Luiz Capitulino <lcapitulino@redhat.com>
With mon:stdio you can exit the VM by switching to the monitor and
sending the "quit" command. It is then useful to pass Ctrl-C to the
VM instead of exiting.
This in turn lets us stop tying the default signal handling behavior
to -nographic, removing gratuitous differences between "-display none"
and "-nographic".
This patch changes behavior for "-display none -serial mon:stdio", as
expected, but not for "-display none -serial stdio".
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Message-id: 1372868986-25988-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
# By Gerd Hoffmann (13) and Michael Tokarev (1)
# Via Michael Tokarev
* mjt/trivial-patches:
doc: we use seabios, not bochs bios
qemu-socket: don't leak opts on error
qemu-char: report udp backend errors
qemu-char: add -chardev mux support
qemu-char: minor mux chardev fixes
qemu-char: use ChardevBackendKind in CharDriver
qemu-char: don't leak opts on error
qemu-char: fix documentation for telnet+wait socket flags
qemu-char: print notification to stderr
qemu-char: use more specific error_setg_* variants
qemu-char: check optional fields using has_*
qemu-socket: catch monitor_get_fd failures
qemu-socket: drop pointless allocation
qemu-socket: zero-initialize SocketAddress
Message-id: 1372443465-22384-1-git-send-email-mjt@msgid.tls.msk.ru
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Commit 2c5f488 introduced qapi-based character device initialization
as a new code path in qemu_chr_new_from_opts(). Unfortunately, it
failed to store parameter opts in the new chardev. Therefore,
qemu_chr_delete() doesn't delete it. Even though the device is gone,
its options linger, and any attempt to create another one with the
same ID fails.
Cc: qemu-stable@nongnu.org
Signed-off-by: Markus Armbruster <armbru@redhat.com>
Reviewed-by: Gerd Hoffmann <kraxel@redhat.com>
Message-id: 1372339512-28149-1-git-send-email-armbru@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Allow to explicitly create mux chardevs on the command line,
like you can using QMP.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
mux failure path has a memory leak. creating a mux chardev can't
fail though, so just assert() that instead of fixing an error path
which never ever runs anyway ...
Also fix bid being leaked while being at it.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Reviewed-by: Laszlo Ersek <lersek@redhat.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Local variables is_* should be bool by usage.
While at it, simplify the logic/code a bit.
Signed-off-by: liguang <lig.fnst@cn.fujitsu.com>
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
In two places qemu uses openpty() which is very system-dependent,
and in both places the pty is switched to raw mode as well.
Make a wrapper function which does both steps, and move all the
system-dependent complexity into a separate file, together
with static/local implementations of openpty() and cfmakeraw()
from qemu-char.c.
It is in a separate file, not part of oslib-posix.c, because
openpty() often resides in -lutil which is not linked to
every program qemu builds.
This change removes #including of <pty.h>, <termios.h>
and other rather specific system headers out of qemu-common.h,
which isn't a place for such specific headers really.
This version has been verified to build correctly on Linux,
OpenBSD, FreeBSD and OpenIndiana. On the latter it lets qemu
to be built with gtk gui which were not possible there due to
missing openpty() and cfmakeraw().
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
Tested-by: Andreas Färber <andreas.faerber@web.de>
This removes <syslog.h> since we don't use
syslogging, and removes second, solaris-specific,
include of <net/if.h> (which is included in
a common part of the file)
Signed-off-by: Michael Tokarev <mjt@tls.msk.ru>
When CHR_EVENT_OPENED was initially added, it was CHR_EVENT_RESET,
and it was issued as a bottom-half:
86e94dea5b
Which we basically used to print out a greeting/prompt for the
monitor.
AFAICT the only reason this was ever done in a BH was because in
some cases we'd modify the chr_write handler for a new chardev
backend *after* the site where we issued the reset (see:
86e94d:qemu_chr_open_stdio())
At some point this event was renamed to CHR_EVENT_OPENED, and we've
maintained the use of this BH ever since.
However, due to 9f939df955, we schedule
the BH via g_idle_add(), which is causing events to sometimes be
delivered after we've already begun processing data from backends,
leading to:
known bugs:
QMP:
session negotation resets with OPENED event, in some cases this
is causing new sessions to get sporadically reset
potential bugs:
hw/usb/redirect.c:
can_read handler checks for dev->parser != NULL, which may be
true if CLOSED BH has not been executed yet. In the past, OPENED
quiesced outstanding CLOSED events prior to us reading client
data. If it's delayed, our check may allow reads to occur even
though we haven't processed the OPENED event yet, and when we
do finally get the OPENED event, our state may get reset.
qtest.c:
can begin session before OPENED event is processed, leading to
a spurious reset of the system and irq_levels
gdbstub.c:
may start a gdb session prior to the machine being paused
To fix these, let's just drop the BH.
Since the initial reasoning for using it still applies to an extent,
work around that by deferring the delivery of CHR_EVENT_OPENED until
after the chardevs have been fully initialized, toward the end of
qmp_chardev_add() (or some cases, qemu_chr_new_from_opts()). This
defers delivery long enough that we can be assured a CharDriverState
is fully initialized before CHR_EVENT_OPENED is sent.
Also, rather than requiring each chardev to do an explicit open, do it
automatically, and allow the small few who don't desire such behavior to
suppress the OPENED-on-init behavior by setting a 'explicit_be_open'
flag.
We additionally add missing OPENED events for stdio backends on w32,
which were previously not being issued, causing us to not recieve the
banner and initial prompts for qmp/hmp.
Reported-by: Stefan Priebe <s.priebe@profihost.ag>
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Message-id: 1370636393-21044-1-git-send-email-mdroth@linux.vnet.ibm.com
Cc: qemu-stable@nongnu.org
Signed-off-by: Michael Roth <mdroth@linux.vnet.ibm.com>
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Fill unset CharDriverState->filename with the backend name, so
'info chardev' will return at least the chardev type. Don't
touch it in case the chardev init function filled it already,
like the socket+pty chardevs do for example.
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
This patch sets the filename when the new qapi backend
init from opts.
The previous patch and discussions as link below:
http://patchwork.ozlabs.org/patch/243896/
If anyone who have better idea to fix this please let
me know your suggestions.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Message-id: 1369132079-11377-3-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Now we have memory char device, but the backend name of it
is a little confusion. We actually register it by 'memory', but
the description in qemu-option, the name of open functions
and the new api backend called it 'ringbuf'. It should keep
consistent. This patch named it all to 'memory'.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Reviewed-by: Eric Blake <eblake@redhat.com>
Message-id: 1369132079-11377-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This unbreaks cross compile builds:
configure --target-list="i386-softmmu" --cpu=i386
When building on a 64bit machine.
Reported-by: David Holsgrove <david.holsgrove@xilinx.com>
Signed-off-by: Peter Crosthwaite <peter.crosthwaite@xilinx.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Reviewed-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
Message-id: 926326e96fd8685d74e9d5bf430fe4ad97a55289.1369191585.git.peter.crosthwaite@xilinx.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
When register and open a chardev udp, the backend name should be udp
not dgram, and we do not have backend dgram in the chardev list. This
patch makes the new qapi udp backend consistent with the original
udp device.
Signed-off-by: Lei Li <lilei@linux.vnet.ibm.com>
Message-id: 1369032665-18159-2-git-send-email-lilei@linux.vnet.ibm.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
This should fix building the GTK+ front-end on BSDs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1368533121-30796-1-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
While reviewing some patches I found this problem where tcp_chr_accept
does not clear listen_tag when returning FALSE, leading to a double
g_source_remove of the underlying source. Not really a problem unless the id
gets re-used in between, but still something we should fix.
While at it I've also reviewed all the other code in qemu-char.c for
similar problems and found that pty_chr_timer has the same problem.
Cc: Anthony Liguori <aliguori@us.ibm.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Message-id: 1366890782-10311-1-git-send-email-hdegoede@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Due to a glib bug, the finalize callback is called with the GMainContext
lock held. Thus, any operation on the context from the callback will
cause recursive locking and a deadlock. This happens, for example,
when a client disconnects from a socket chardev.
The fix for this is somewhat ugly, because we need to forego polymorphism
and implement our own function to destroy IOWatchPoll sources. The
right thing to do here would be child sources, but we support older
glib versions that do not have them. Not coincidentially, glib developers
found and fixed the deadlock as part of implementing child sources.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Tested-by: Sander Eikelenboom <linux@eikelenboom.it>
Message-id: 1366385529-10329-5-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
Even if a CharDriverState's source is blocked by the front-end,
it must not be dropped. The IOWatchPoll that wraps it will take
care of adding and removing it to the main loop. Only remove
the source when the channel is closed; and in that case, make sure
that the wrapping IOWatchPoll is removed too.
These should just be theoretical bugs.
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366385529-10329-4-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
There is no need to use a timer and pty_chr_read to detect a connected
pty. It is simpler to just call g_poll periodically and check for POLLHUP.
It is done once per second, and only if the pty is disconnected, so it
is cheap enough.
Tested with "-monitor pty" and "-serial mon:pty", both of which work
correctly and do not freeze QEMU. (How to test ptys? "socat -,raw,echo=0
/dev/pts/4,raw").
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1366385529-10329-3-git-send-email-pbonzini@redhat.com
Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
