hw/arm: versal: Add support for the XRAMs

Connect the support for the Versal Accelerator RAMs (XRAMs).

Reviewed-by: Luc Michel <luc@lmichel.fr>
Acked-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@xilinx.com>
Message-id: 20210308224637.2949533-3-edgar.iglesias@gmail.com
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

docs/system/arm/xlnx-versal-virt.rst

@@ -30,6 +30,7 @@ Implemented devices:
 - 8 ADMA (Xilinx zDMA) channels
 - 2 SD Controllers
 - OCM (256KB of On Chip Memory)
+- XRAM (4MB of on chip Accelerator RAM)
 - DDR memory
 
 QEMU does not yet model any other devices, including the PL and the AI Engine.

hw/arm/xlnx-versal.c

@@ -10,6 +10,7 @@
  */
 
 #include "qemu/osdep.h"
+#include "qemu/units.h"
 #include "qapi/error.h"
 #include "qemu/log.h"
 #include "qemu/module.h"
@@ -278,6 +279,40 @@ static void versal_create_rtc(Versal *s, qemu_irq *pic)
     sysbus_connect_irq(sbd, 1, pic[VERSAL_RTC_APB_ERR_IRQ]);
 }
 
+static void versal_create_xrams(Versal *s, qemu_irq *pic)
+{
+    int nr_xrams = ARRAY_SIZE(s->lpd.xram.ctrl);
+    DeviceState *orgate;
+    int i;
+
+    /* XRAM IRQs get ORed into a single line.  */
+    object_initialize_child(OBJECT(s), "xram-irq-orgate",
+                            &s->lpd.xram.irq_orgate, TYPE_OR_IRQ);
+    orgate = DEVICE(&s->lpd.xram.irq_orgate);
+    object_property_set_int(OBJECT(orgate),
+                            "num-lines", nr_xrams, &error_fatal);
+    qdev_realize(orgate, NULL, &error_fatal);
+    qdev_connect_gpio_out(orgate, 0, pic[VERSAL_XRAM_IRQ_0]);
+
+    for (i = 0; i < ARRAY_SIZE(s->lpd.xram.ctrl); i++) {
+        SysBusDevice *sbd;
+        MemoryRegion *mr;
+
+        object_initialize_child(OBJECT(s), "xram[*]", &s->lpd.xram.ctrl[i],
+                                TYPE_XLNX_XRAM_CTRL);
+        sbd = SYS_BUS_DEVICE(&s->lpd.xram.ctrl[i]);
+        sysbus_realize(sbd, &error_fatal);
+
+        mr = sysbus_mmio_get_region(sbd, 0);
+        memory_region_add_subregion(&s->mr_ps,
+                                    MM_XRAMC + i * MM_XRAMC_SIZE, mr);
+        mr = sysbus_mmio_get_region(sbd, 1);
+        memory_region_add_subregion(&s->mr_ps, MM_XRAM + i * MiB, mr);
+
+        sysbus_connect_irq(sbd, 0, qdev_get_gpio_in(orgate, i));
+    }
+}
+
 /* This takes the board allocated linear DDR memory and creates aliases
  * for each split DDR range/aperture on the Versal address map.
  */
@@ -363,6 +398,7 @@ static void versal_realize(DeviceState *dev, Error **errp)
     versal_create_admas(s, pic);
     versal_create_sds(s, pic);
     versal_create_rtc(s, pic);
+    versal_create_xrams(s, pic);
     versal_map_ddr(s);
     versal_unimp(s);
 

include/hw/arm/xlnx-versal.h

@@ -14,6 +14,7 @@
 
 #include "hw/sysbus.h"
 #include "hw/arm/boot.h"
+#include "hw/or-irq.h"
 #include "hw/sd/sdhci.h"
 #include "hw/intc/arm_gicv3.h"
 #include "hw/char/pl011.h"
@@ -22,6 +23,7 @@
 #include "hw/rtc/xlnx-zynqmp-rtc.h"
 #include "qom/object.h"
 #include "hw/usb/xlnx-usb-subsystem.h"
+#include "hw/misc/xlnx-versal-xramc.h"
 
 #define TYPE_XLNX_VERSAL "xlnx-versal"
 OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
@@ -31,6 +33,7 @@ OBJECT_DECLARE_SIMPLE_TYPE(Versal, XLNX_VERSAL)
 #define XLNX_VERSAL_NR_GEMS    2
 #define XLNX_VERSAL_NR_ADMAS   8
 #define XLNX_VERSAL_NR_SDS     2
+#define XLNX_VERSAL_NR_XRAM    4
 #define XLNX_VERSAL_NR_IRQS    192
 
 struct Versal {
@@ -62,6 +65,11 @@ struct Versal {
             XlnxZDMA adma[XLNX_VERSAL_NR_ADMAS];
             VersalUsb2 usb;
         } iou;
+
+        struct {
+            qemu_or_irq irq_orgate;
+            XlnxXramCtrl ctrl[XLNX_VERSAL_NR_XRAM];
+        } xram;
     } lpd;
 
     /* The Platform Management Controller subsystem.  */
@@ -96,6 +104,7 @@ struct Versal {
 #define VERSAL_GEM1_IRQ_0          58
 #define VERSAL_GEM1_WAKE_IRQ_0     59
 #define VERSAL_ADMA_IRQ_0          60
+#define VERSAL_XRAM_IRQ_0          79
 #define VERSAL_RTC_APB_ERR_IRQ     121
 #define VERSAL_SD0_IRQ_0           126
 #define VERSAL_RTC_ALARM_IRQ       142
@@ -128,6 +137,10 @@ struct Versal {
 #define MM_OCM                      0xfffc0000U
 #define MM_OCM_SIZE                 0x40000
 
+#define MM_XRAM                     0xfe800000
+#define MM_XRAMC                    0xff8e0000
+#define MM_XRAMC_SIZE               0x10000
+
 #define MM_USB2_CTRL_REGS           0xFF9D0000
 #define MM_USB2_CTRL_REGS_SIZE      0x10000