linux/arch/arm/mach-omap2/board-zoom.c
Arnd Bergmann 6e7f7cfce2 These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
 as requested by me and Olof. The reason was that at this point
 we really should be able to do the arch/arm related changes
 separately from driver changes to avoid dependencies between
 branches.
 
 These patches were initially part of the USB related MFD patches.
 Based on our comments, Roger Quadros quickly reworked these
 patches into a shared branch between ARM SoC tree and the MFD
 tree, then separate patches for the OMAP platform data and
 MFD driver.
 
 Note that this branch will conflict with c1d1cd597f
 ("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
 early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
 for the merge resolution.
 -----BEGIN PGP SIGNATURE-----
 Version: GnuPG v1.4.12 (GNU/Linux)
 
 iQIcBAABAgAGBQJRHR36AAoJEBvUPslcq6Vz6hEQAIIzgO4Rwf55/nMfRyMWqNEF
 bM5h8KmMmix0M+MIrCigqciXzEmOY0y95ssQJcdxUoDl3kCpkHfcrxDTQmf6ehGD
 cMxYkeYVB9JYDuYr3HUvqv7MvDQIge11Sh1Yfj1YG7UYHNDh5OP+4DBtSGByIhHf
 clQ9I3c74EBxqEzyUWlE7BOYH6+WEQ2yh4RzzDnSgiQcyRn25jWd0RpXoroE2XQb
 ZsW1wZtpFqsMfHsPrIdHm5KLsgn9tSvWZ+NEUlXVqnNumdl3zaxX65fOGNWGjAax
 A8JRpntvwcGGl6XV54mCVV/yuStuA7kdDn9ABnghUFy8ZzgRA2hvJFe0Kc5lUgO1
 RRKQ4+fsFyPYDyvMmo4tYsNOXxW+DryHSxvhUICHqjKvXyWEUSTHLJ3vHIvq2zjZ
 cYV+opeZkF6ddwUhPhIVYUmFDfZeCriqOUlVnQYLxqAzRSTEk5buNW58WtX4ZNA1
 f6k1xlepsLCvuMAr8IGZyWnM6SH3k+/f0Hs9Pl8mijV/nNSaF8JW4k9NVPnFwT9Q
 PcwVhT23mLkKLr5ab03EEzCs/2a3VTkmUbQm70tC2FTtMQTwmHCpg+WQMf+aug6e
 8++A6V+GqZ6ggW5rV95jJsJ39hBAAK0lCld+fNZ5MjQgMwlAe+mdl6FrQWib1TFa
 obIzQnfifyPjomrRAdu5
 =svW/
 -----END PGP SIGNATURE-----

Merge tag 'omap-for-v3.9/usb-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/soc

These changes contain the OMAP USB related platform data changes
that were dropped from linux next because of the merge conflicts
as requested by me and Olof. The reason was that at this point
we really should be able to do the arch/arm related changes
separately from driver changes to avoid dependencies between
branches.

These patches were initially part of the USB related MFD patches.
Based on our comments, Roger Quadros quickly reworked these
patches into a shared branch between ARM SoC tree and the MFD
tree, then separate patches for the OMAP platform data and
MFD driver.

Note that this branch will conflict with c1d1cd597f
("ARM: OMAP2+: omap_device: remove obsolete pm_lats and
early_device code"). Please see http://lkml.org/lkml/2013/2/11/16
for the merge resolution.

[arnd - resolved the merge conflict]

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
2013-02-19 20:54:25 +01:00

156 lines
4.5 KiB
C

/*
* Copyright (C) 2009-2010 Texas Instruments Inc.
* Mikkel Christensen <mlc@ti.com>
* Felipe Balbi <balbi@ti.com>
*
* Modified from mach-omap2/board-ldp.c
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/input.h>
#include <linux/gpio.h>
#include <linux/i2c/twl.h>
#include <linux/mtd/nand.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include "common.h"
#include "board-zoom.h"
#include "board-flash.h"
#include "mux.h"
#include "sdram-micron-mt46h32m32lf-6.h"
#include "sdram-hynix-h8mbx00u0mer-0em.h"
#define ZOOM3_EHCI_RESET_GPIO 64
#ifdef CONFIG_OMAP_MUX
static struct omap_board_mux board_mux[] __initdata = {
/* WLAN IRQ - GPIO 162 */
OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT),
/* WLAN POWER ENABLE - GPIO 101 */
OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
/* WLAN SDIO: MMC3 CMD */
OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 CLK */
OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
/* WLAN SDIO: MMC3 DAT[0-3] */
OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
{ .reg_offset = OMAP_MUX_TERMINATOR },
};
#endif
static struct mtd_partition zoom_nand_partitions[] = {
/* All the partition sizes are listed in terms of NAND block size */
{
.name = "X-Loader-NAND",
.offset = 0,
.size = 4 * (64 * 2048), /* 512KB, 0x80000 */
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "U-Boot-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x80000 */
.size = 10 * (64 * 2048), /* 1.25MB, 0x140000 */
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
{
.name = "Boot Env-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1c0000 */
.size = 2 * (64 * 2048), /* 256KB, 0x40000 */
},
{
.name = "Kernel-NAND",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x0200000*/
.size = 240 * (64 * 2048), /* 30M, 0x1E00000 */
},
{
.name = "system",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x2000000 */
.size = 3328 * (64 * 2048), /* 416M, 0x1A000000 */
},
{
.name = "userdata",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1C000000*/
.size = 256 * (64 * 2048), /* 32M, 0x2000000 */
},
{
.name = "cache",
.offset = MTDPART_OFS_APPEND, /* Offset = 0x1E000000*/
.size = 256 * (64 * 2048), /* 32M, 0x2000000 */
},
};
static struct usbhs_omap_platform_data usbhs_bdata __initdata = {
.port_mode[0] = OMAP_USBHS_PORT_MODE_UNUSED,
.port_mode[1] = OMAP_EHCI_PORT_MODE_PHY,
.port_mode[2] = OMAP_USBHS_PORT_MODE_UNUSED,
.phy_reset = true,
.reset_gpio_port[0] = -EINVAL,
.reset_gpio_port[1] = ZOOM3_EHCI_RESET_GPIO,
.reset_gpio_port[2] = -EINVAL,
};
static void __init omap_zoom_init(void)
{
if (machine_is_omap_zoom2()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
} else if (machine_is_omap_zoom3()) {
omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
usbhs_init(&usbhs_bdata);
}
board_nand_init(zoom_nand_partitions,
ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS,
NAND_BUSWIDTH_16, nand_default_timings);
zoom_debugboard_init();
zoom_peripherals_init();
if (machine_is_omap_zoom2())
omap_sdrc_init(mt46h32m32lf6_sdrc_params,
mt46h32m32lf6_sdrc_params);
else if (machine_is_omap_zoom3())
omap_sdrc_init(h8mbx00u0mer0em_sdrc_params,
h8mbx00u0mer0em_sdrc_params);
zoom_display_init();
}
MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3430_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.init_late = omap3430_init_late,
.init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END
MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
.atag_offset = 0x100,
.reserve = omap_reserve,
.map_io = omap3_map_io,
.init_early = omap3630_init_early,
.init_irq = omap3_init_irq,
.handle_irq = omap3_intc_handle_irq,
.init_machine = omap_zoom_init,
.init_late = omap3630_init_late,
.init_time = omap3_sync32k_timer_init,
.restart = omap3xxx_restart,
MACHINE_END