linux/drivers/soc/renesas/r8a779a0-sysc.c
Len Baker 148bcca9ad soc: renesas: Prefer memcpy() over strcpy()
strcpy() performs no bounds checking on the destination buffer. This
could result in linear overflows beyond the end of the buffer, leading
to all kinds of misbehaviors. So, use memcpy() as a safe replacement.

This is a previous step in the path to remove the strcpy() function
entirely from the kernel.

Signed-off-by: Len Baker <len.baker@gmx.com>
Link: https://lore.kernel.org/r/20210808125012.4715-3-len.baker@gmx.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
2021-08-12 12:36:57 +02:00

451 lines
12 KiB
C

// SPDX-License-Identifier: GPL-2.0
/*
* Renesas R-Car V3U System Controller
*
* Copyright (C) 2020 Renesas Electronics Corp.
*/
#include <linux/bits.h>
#include <linux/clk/renesas.h>
#include <linux/delay.h>
#include <linux/err.h>
#include <linux/io.h>
#include <linux/iopoll.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/of_address.h>
#include <linux/pm_domain.h>
#include <linux/slab.h>
#include <linux/spinlock.h>
#include <linux/types.h>
#include <dt-bindings/power/r8a779a0-sysc.h>
/*
* Power Domain flags
*/
#define PD_CPU BIT(0) /* Area contains main CPU core */
#define PD_SCU BIT(1) /* Area contains SCU and L2 cache */
#define PD_NO_CR BIT(2) /* Area lacks PWR{ON,OFF}CR registers */
#define PD_CPU_NOCR PD_CPU | PD_NO_CR /* CPU area lacks CR */
#define PD_ALWAYS_ON PD_NO_CR /* Always-on area */
/*
* Description of a Power Area
*/
struct r8a779a0_sysc_area {
const char *name;
u8 pdr; /* PDRn */
int parent; /* -1 if none */
unsigned int flags; /* See PD_* */
};
/*
* SoC-specific Power Area Description
*/
struct r8a779a0_sysc_info {
const struct r8a779a0_sysc_area *areas;
unsigned int num_areas;
};
static struct r8a779a0_sysc_area r8a779a0_areas[] __initdata = {
{ "always-on", R8A779A0_PD_ALWAYS_ON, -1, PD_ALWAYS_ON },
{ "a3e0", R8A779A0_PD_A3E0, R8A779A0_PD_ALWAYS_ON, PD_SCU },
{ "a3e1", R8A779A0_PD_A3E1, R8A779A0_PD_ALWAYS_ON, PD_SCU },
{ "a2e0d0", R8A779A0_PD_A2E0D0, R8A779A0_PD_A3E0, PD_SCU },
{ "a2e0d1", R8A779A0_PD_A2E0D1, R8A779A0_PD_A3E0, PD_SCU },
{ "a2e1d0", R8A779A0_PD_A2E1D0, R8A779A0_PD_A3E1, PD_SCU },
{ "a2e1d1", R8A779A0_PD_A2E1D1, R8A779A0_PD_A3E1, PD_SCU },
{ "a1e0d0c0", R8A779A0_PD_A1E0D0C0, R8A779A0_PD_A2E0D0, PD_CPU_NOCR },
{ "a1e0d0c1", R8A779A0_PD_A1E0D0C1, R8A779A0_PD_A2E0D0, PD_CPU_NOCR },
{ "a1e0d1c0", R8A779A0_PD_A1E0D1C0, R8A779A0_PD_A2E0D1, PD_CPU_NOCR },
{ "a1e0d1c1", R8A779A0_PD_A1E0D1C1, R8A779A0_PD_A2E0D1, PD_CPU_NOCR },
{ "a1e1d0c0", R8A779A0_PD_A1E1D0C0, R8A779A0_PD_A2E1D0, PD_CPU_NOCR },
{ "a1e1d0c1", R8A779A0_PD_A1E1D0C1, R8A779A0_PD_A2E1D0, PD_CPU_NOCR },
{ "a1e1d1c0", R8A779A0_PD_A1E1D1C0, R8A779A0_PD_A2E1D1, PD_CPU_NOCR },
{ "a1e1d1c1", R8A779A0_PD_A1E1D1C1, R8A779A0_PD_A2E1D1, PD_CPU_NOCR },
{ "3dg-a", R8A779A0_PD_3DG_A, R8A779A0_PD_ALWAYS_ON },
{ "3dg-b", R8A779A0_PD_3DG_B, R8A779A0_PD_3DG_A },
{ "a3vip0", R8A779A0_PD_A3VIP0, R8A779A0_PD_ALWAYS_ON },
{ "a3vip1", R8A779A0_PD_A3VIP1, R8A779A0_PD_ALWAYS_ON },
{ "a3vip3", R8A779A0_PD_A3VIP3, R8A779A0_PD_ALWAYS_ON },
{ "a3vip2", R8A779A0_PD_A3VIP2, R8A779A0_PD_ALWAYS_ON },
{ "a3isp01", R8A779A0_PD_A3ISP01, R8A779A0_PD_ALWAYS_ON },
{ "a3isp23", R8A779A0_PD_A3ISP23, R8A779A0_PD_ALWAYS_ON },
{ "a3ir", R8A779A0_PD_A3IR, R8A779A0_PD_ALWAYS_ON },
{ "a2cn0", R8A779A0_PD_A2CN0, R8A779A0_PD_A3IR },
{ "a2imp01", R8A779A0_PD_A2IMP01, R8A779A0_PD_A3IR },
{ "a2dp0", R8A779A0_PD_A2DP0, R8A779A0_PD_A3IR },
{ "a2cv0", R8A779A0_PD_A2CV0, R8A779A0_PD_A3IR },
{ "a2cv1", R8A779A0_PD_A2CV1, R8A779A0_PD_A3IR },
{ "a2cv4", R8A779A0_PD_A2CV4, R8A779A0_PD_A3IR },
{ "a2cv6", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
{ "a2cn2", R8A779A0_PD_A2CN2, R8A779A0_PD_A3IR },
{ "a2imp23", R8A779A0_PD_A2IMP23, R8A779A0_PD_A3IR },
{ "a2dp1", R8A779A0_PD_A2DP0, R8A779A0_PD_A3IR },
{ "a2cv2", R8A779A0_PD_A2CV0, R8A779A0_PD_A3IR },
{ "a2cv3", R8A779A0_PD_A2CV1, R8A779A0_PD_A3IR },
{ "a2cv5", R8A779A0_PD_A2CV4, R8A779A0_PD_A3IR },
{ "a2cv7", R8A779A0_PD_A2CV6, R8A779A0_PD_A3IR },
{ "a2cn1", R8A779A0_PD_A2CN1, R8A779A0_PD_A3IR },
{ "a1cnn0", R8A779A0_PD_A1CNN0, R8A779A0_PD_A2CN0 },
{ "a1cnn2", R8A779A0_PD_A1CNN2, R8A779A0_PD_A2CN2 },
{ "a1dsp0", R8A779A0_PD_A1DSP0, R8A779A0_PD_A2CN2 },
{ "a1cnn1", R8A779A0_PD_A1CNN1, R8A779A0_PD_A2CN1 },
{ "a1dsp1", R8A779A0_PD_A1DSP1, R8A779A0_PD_A2CN1 },
};
static const struct r8a779a0_sysc_info r8a779a0_sysc_info __initconst = {
.areas = r8a779a0_areas,
.num_areas = ARRAY_SIZE(r8a779a0_areas),
};
/* SYSC Common */
#define SYSCSR 0x000 /* SYSC Status Register */
#define SYSCPONSR(x) (0x800 + ((x) * 0x4)) /* Power-ON Status Register 0 */
#define SYSCPOFFSR(x) (0x808 + ((x) * 0x4)) /* Power-OFF Status Register */
#define SYSCISCR(x) (0x810 + ((x) * 0x4)) /* Interrupt Status/Clear Register */
#define SYSCIER(x) (0x820 + ((x) * 0x4)) /* Interrupt Enable Register */
#define SYSCIMR(x) (0x830 + ((x) * 0x4)) /* Interrupt Mask Register */
/* Power Domain Registers */
#define PDRSR(n) (0x1000 + ((n) * 0x40))
#define PDRONCR(n) (0x1004 + ((n) * 0x40))
#define PDROFFCR(n) (0x1008 + ((n) * 0x40))
#define PDRESR(n) (0x100C + ((n) * 0x40))
/* PWRON/PWROFF */
#define PWRON_PWROFF BIT(0) /* Power-ON/OFF request */
/* PDRESR */
#define PDRESR_ERR BIT(0)
/* PDRSR */
#define PDRSR_OFF BIT(0) /* Power-OFF state */
#define PDRSR_ON BIT(4) /* Power-ON state */
#define PDRSR_OFF_STATE BIT(8) /* Processing Power-OFF sequence */
#define PDRSR_ON_STATE BIT(12) /* Processing Power-ON sequence */
#define SYSCSR_BUSY GENMASK(1, 0) /* All bit sets is not busy */
#define SYSCSR_TIMEOUT 10000
#define SYSCSR_DELAY_US 10
#define PDRESR_RETRIES 1000
#define PDRESR_DELAY_US 10
#define SYSCISR_TIMEOUT 10000
#define SYSCISR_DELAY_US 10
#define NUM_DOMAINS_EACH_REG BITS_PER_TYPE(u32)
static void __iomem *r8a779a0_sysc_base;
static DEFINE_SPINLOCK(r8a779a0_sysc_lock); /* SMP CPUs + I/O devices */
static int r8a779a0_sysc_pwr_on_off(u8 pdr, bool on)
{
unsigned int reg_offs;
u32 val;
int ret;
if (on)
reg_offs = PDRONCR(pdr);
else
reg_offs = PDROFFCR(pdr);
/* Wait until SYSC is ready to accept a power request */
ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCSR, val,
(val & SYSCSR_BUSY) == SYSCSR_BUSY,
SYSCSR_DELAY_US, SYSCSR_TIMEOUT);
if (ret < 0)
return -EAGAIN;
/* Submit power shutoff or power resume request */
iowrite32(PWRON_PWROFF, r8a779a0_sysc_base + reg_offs);
return 0;
}
static int clear_irq_flags(unsigned int reg_idx, unsigned int isr_mask)
{
u32 val;
int ret;
iowrite32(isr_mask, r8a779a0_sysc_base + SYSCISCR(reg_idx));
ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCISCR(reg_idx),
val, !(val & isr_mask),
SYSCISR_DELAY_US, SYSCISR_TIMEOUT);
if (ret < 0) {
pr_err("\n %s : Can not clear IRQ flags in SYSCISCR", __func__);
return -EIO;
}
return 0;
}
static int r8a779a0_sysc_power(u8 pdr, bool on)
{
unsigned int isr_mask;
unsigned int reg_idx, bit_idx;
unsigned int status;
unsigned long flags;
int ret = 0;
u32 val;
int k;
spin_lock_irqsave(&r8a779a0_sysc_lock, flags);
reg_idx = pdr / NUM_DOMAINS_EACH_REG;
bit_idx = pdr % NUM_DOMAINS_EACH_REG;
isr_mask = BIT(bit_idx);
/*
* The interrupt source needs to be enabled, but masked, to prevent the
* CPU from receiving it.
*/
iowrite32(ioread32(r8a779a0_sysc_base + SYSCIER(reg_idx)) | isr_mask,
r8a779a0_sysc_base + SYSCIER(reg_idx));
iowrite32(ioread32(r8a779a0_sysc_base + SYSCIMR(reg_idx)) | isr_mask,
r8a779a0_sysc_base + SYSCIMR(reg_idx));
ret = clear_irq_flags(reg_idx, isr_mask);
if (ret)
goto out;
/* Submit power shutoff or resume request until it was accepted */
for (k = 0; k < PDRESR_RETRIES; k++) {
ret = r8a779a0_sysc_pwr_on_off(pdr, on);
if (ret)
goto out;
status = ioread32(r8a779a0_sysc_base + PDRESR(pdr));
if (!(status & PDRESR_ERR))
break;
udelay(PDRESR_DELAY_US);
}
if (k == PDRESR_RETRIES) {
ret = -EIO;
goto out;
}
/* Wait until the power shutoff or resume request has completed * */
ret = readl_poll_timeout_atomic(r8a779a0_sysc_base + SYSCISCR(reg_idx),
val, (val & isr_mask),
SYSCISR_DELAY_US, SYSCISR_TIMEOUT);
if (ret < 0) {
ret = -EIO;
goto out;
}
/* Clear interrupt flags */
ret = clear_irq_flags(reg_idx, isr_mask);
if (ret)
goto out;
out:
spin_unlock_irqrestore(&r8a779a0_sysc_lock, flags);
pr_debug("sysc power %s domain %d: %08x -> %d\n", on ? "on" : "off",
pdr, ioread32(r8a779a0_sysc_base + SYSCISCR(reg_idx)), ret);
return ret;
}
static bool r8a779a0_sysc_power_is_off(u8 pdr)
{
unsigned int st;
st = ioread32(r8a779a0_sysc_base + PDRSR(pdr));
if (st & PDRSR_OFF)
return true;
return false;
}
struct r8a779a0_sysc_pd {
struct generic_pm_domain genpd;
u8 pdr;
unsigned int flags;
char name[];
};
static inline struct r8a779a0_sysc_pd *to_r8a779a0_pd(struct generic_pm_domain *d)
{
return container_of(d, struct r8a779a0_sysc_pd, genpd);
}
static int r8a779a0_sysc_pd_power_off(struct generic_pm_domain *genpd)
{
struct r8a779a0_sysc_pd *pd = to_r8a779a0_pd(genpd);
pr_debug("%s: %s\n", __func__, genpd->name);
return r8a779a0_sysc_power(pd->pdr, false);
}
static int r8a779a0_sysc_pd_power_on(struct generic_pm_domain *genpd)
{
struct r8a779a0_sysc_pd *pd = to_r8a779a0_pd(genpd);
pr_debug("%s: %s\n", __func__, genpd->name);
return r8a779a0_sysc_power(pd->pdr, true);
}
static int __init r8a779a0_sysc_pd_setup(struct r8a779a0_sysc_pd *pd)
{
struct generic_pm_domain *genpd = &pd->genpd;
const char *name = pd->genpd.name;
int error;
if (pd->flags & PD_CPU) {
/*
* This domain contains a CPU core and therefore it should
* only be turned off if the CPU is not in use.
*/
pr_debug("PM domain %s contains %s\n", name, "CPU");
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
} else if (pd->flags & PD_SCU) {
/*
* This domain contains an SCU and cache-controller, and
* therefore it should only be turned off if the CPU cores are
* not in use.
*/
pr_debug("PM domain %s contains %s\n", name, "SCU");
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
} else if (pd->flags & PD_NO_CR) {
/*
* This domain cannot be turned off.
*/
genpd->flags |= GENPD_FLAG_ALWAYS_ON;
}
if (!(pd->flags & (PD_CPU | PD_SCU))) {
/* Enable Clock Domain for I/O devices */
genpd->flags |= GENPD_FLAG_PM_CLK | GENPD_FLAG_ACTIVE_WAKEUP;
genpd->attach_dev = cpg_mssr_attach_dev;
genpd->detach_dev = cpg_mssr_detach_dev;
}
genpd->power_off = r8a779a0_sysc_pd_power_off;
genpd->power_on = r8a779a0_sysc_pd_power_on;
if (pd->flags & (PD_CPU | PD_NO_CR)) {
/* Skip CPUs (handled by SMP code) and areas without control */
pr_debug("%s: Not touching %s\n", __func__, genpd->name);
goto finalize;
}
if (!r8a779a0_sysc_power_is_off(pd->pdr)) {
pr_debug("%s: %s is already powered\n", __func__, genpd->name);
goto finalize;
}
r8a779a0_sysc_power(pd->pdr, true);
finalize:
error = pm_genpd_init(genpd, &simple_qos_governor, false);
if (error)
pr_err("Failed to init PM domain %s: %d\n", name, error);
return error;
}
static const struct of_device_id r8a779a0_sysc_matches[] __initconst = {
{ .compatible = "renesas,r8a779a0-sysc", .data = &r8a779a0_sysc_info },
{ /* sentinel */ }
};
struct r8a779a0_pm_domains {
struct genpd_onecell_data onecell_data;
struct generic_pm_domain *domains[R8A779A0_PD_ALWAYS_ON + 1];
};
static struct genpd_onecell_data *r8a779a0_sysc_onecell_data;
static int __init r8a779a0_sysc_pd_init(void)
{
const struct r8a779a0_sysc_info *info;
const struct of_device_id *match;
struct r8a779a0_pm_domains *domains;
struct device_node *np;
void __iomem *base;
unsigned int i;
int error;
np = of_find_matching_node_and_match(NULL, r8a779a0_sysc_matches, &match);
if (!np)
return -ENODEV;
info = match->data;
base = of_iomap(np, 0);
if (!base) {
pr_warn("%pOF: Cannot map regs\n", np);
error = -ENOMEM;
goto out_put;
}
r8a779a0_sysc_base = base;
domains = kzalloc(sizeof(*domains), GFP_KERNEL);
if (!domains) {
error = -ENOMEM;
goto out_put;
}
domains->onecell_data.domains = domains->domains;
domains->onecell_data.num_domains = ARRAY_SIZE(domains->domains);
r8a779a0_sysc_onecell_data = &domains->onecell_data;
for (i = 0; i < info->num_areas; i++) {
const struct r8a779a0_sysc_area *area = &info->areas[i];
struct r8a779a0_sysc_pd *pd;
size_t n;
if (!area->name) {
/* Skip NULLified area */
continue;
}
n = strlen(area->name) + 1;
pd = kzalloc(sizeof(*pd) + n, GFP_KERNEL);
if (!pd) {
error = -ENOMEM;
goto out_put;
}
memcpy(pd->name, area->name, n);
pd->genpd.name = pd->name;
pd->pdr = area->pdr;
pd->flags = area->flags;
error = r8a779a0_sysc_pd_setup(pd);
if (error)
goto out_put;
domains->domains[area->pdr] = &pd->genpd;
if (area->parent < 0)
continue;
error = pm_genpd_add_subdomain(domains->domains[area->parent],
&pd->genpd);
if (error) {
pr_warn("Failed to add PM subdomain %s to parent %u\n",
area->name, area->parent);
goto out_put;
}
}
error = of_genpd_add_provider_onecell(np, &domains->onecell_data);
out_put:
of_node_put(np);
return error;
}
early_initcall(r8a779a0_sysc_pd_init);