linux/arch/arm/mach-pxa/mainstone.c
eric miao fef06d274f [ARM] pxa: use new pin configuration mechanism for mainstone
1. the following code to configure PGSRx is no way portable and
   intuitive:

-	PGSR0 = 0x00008800;
-       PGSR1 = 0x00000002;
-       PGSR2 = 0x0001FC00;
-       PGSR3 = 0x00001F81;

   this is removed as low power state has already been encoded in
   the pin configuration definitions.

   Note: there is no specific reason for some of the GPIOs to drive
   high in low power mode as indicated by the above setting, those
   bits are ignored, and the result is validated to work.

2. the following code to configure GPIO wakeup is removed as this
   is now totally handled by pxa2xx_mfp_config():

-       PWER  = 0xC0000002;
-       PRER  = 0x00000002;
-       PFER  = 0x00000002;

Signed-off-by: eric miao <eric.miao@marvell.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2008-04-19 11:29:05 +01:00

594 lines
14 KiB
C

/*
* linux/arch/arm/mach-pxa/mainstone.c
*
* Support for the Intel HCDDBBVA0 Development Platform.
* (go figure how they came up with such name...)
*
* Author: Nicolas Pitre
* Created: Nov 05, 2002
* Copyright: MontaVista Software Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/sysdev.h>
#include <linux/interrupt.h>
#include <linux/sched.h>
#include <linux/bitops.h>
#include <linux/fb.h>
#include <linux/ioport.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/partitions.h>
#include <linux/backlight.h>
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
#include <asm/mach-types.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/sizes.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/mach/irq.h>
#include <asm/mach/flash.h>
#include <asm/arch/pxa-regs.h>
#include <asm/arch/pxa2xx-regs.h>
#include <asm/arch/mfp-pxa27x.h>
#include <asm/arch/mainstone.h>
#include <asm/arch/audio.h>
#include <asm/arch/pxafb.h>
#include <asm/arch/mmc.h>
#include <asm/arch/irda.h>
#include <asm/arch/ohci.h>
#include "generic.h"
#include "devices.h"
static unsigned long mainstone_pin_config[] = {
/* Chip Select */
GPIO15_nCS_1,
/* LCD - 16bpp Active TFT */
GPIO58_LCD_LDD_0,
GPIO59_LCD_LDD_1,
GPIO60_LCD_LDD_2,
GPIO61_LCD_LDD_3,
GPIO62_LCD_LDD_4,
GPIO63_LCD_LDD_5,
GPIO64_LCD_LDD_6,
GPIO65_LCD_LDD_7,
GPIO66_LCD_LDD_8,
GPIO67_LCD_LDD_9,
GPIO68_LCD_LDD_10,
GPIO69_LCD_LDD_11,
GPIO70_LCD_LDD_12,
GPIO71_LCD_LDD_13,
GPIO72_LCD_LDD_14,
GPIO73_LCD_LDD_15,
GPIO74_LCD_FCLK,
GPIO75_LCD_LCLK,
GPIO76_LCD_PCLK,
GPIO77_LCD_BIAS,
GPIO16_PWM0_OUT, /* Backlight */
/* MMC */
GPIO32_MMC_CLK,
GPIO112_MMC_CMD,
GPIO92_MMC_DAT_0,
GPIO109_MMC_DAT_1,
GPIO110_MMC_DAT_2,
GPIO111_MMC_DAT_3,
/* USB Host Port 1 */
GPIO88_USBH1_PWR,
GPIO89_USBH1_PEN,
/* PC Card */
GPIO48_nPOE,
GPIO49_nPWE,
GPIO50_nPIOR,
GPIO51_nPIOW,
GPIO85_nPCE_1,
GPIO54_nPCE_2,
GPIO79_PSKTSEL,
GPIO55_nPREG,
GPIO56_nPWAIT,
GPIO57_nIOIS16,
/* AC97 */
GPIO45_AC97_SYSCLK,
/* Keypad */
GPIO93_KP_DKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO94_KP_DKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO95_KP_DKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH,
GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH,
GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH,
GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH,
GPIO98_KP_MKIN_4 | WAKEUP_ON_LEVEL_HIGH,
GPIO99_KP_MKIN_5 | WAKEUP_ON_LEVEL_HIGH,
GPIO103_KP_MKOUT_0,
GPIO104_KP_MKOUT_1,
GPIO105_KP_MKOUT_2,
GPIO106_KP_MKOUT_3,
GPIO107_KP_MKOUT_4,
GPIO108_KP_MKOUT_5,
GPIO96_KP_MKOUT_6,
/* GPIO */
GPIO1_GPIO | WAKEUP_ON_EDGE_BOTH,
};
static unsigned long mainstone_irq_enabled;
static void mainstone_mask_irq(unsigned int irq)
{
int mainstone_irq = (irq - MAINSTONE_IRQ(0));
MST_INTMSKENA = (mainstone_irq_enabled &= ~(1 << mainstone_irq));
}
static void mainstone_unmask_irq(unsigned int irq)
{
int mainstone_irq = (irq - MAINSTONE_IRQ(0));
/* the irq can be acknowledged only if deasserted, so it's done here */
MST_INTSETCLR &= ~(1 << mainstone_irq);
MST_INTMSKENA = (mainstone_irq_enabled |= (1 << mainstone_irq));
}
static struct irq_chip mainstone_irq_chip = {
.name = "FPGA",
.ack = mainstone_mask_irq,
.mask = mainstone_mask_irq,
.unmask = mainstone_unmask_irq,
};
static void mainstone_irq_handler(unsigned int irq, struct irq_desc *desc)
{
unsigned long pending = MST_INTSETCLR & mainstone_irq_enabled;
do {
GEDR(0) = GPIO_bit(0); /* clear useless edge notification */
if (likely(pending)) {
irq = MAINSTONE_IRQ(0) + __ffs(pending);
desc = irq_desc + irq;
desc_handle_irq(irq, desc);
}
pending = MST_INTSETCLR & mainstone_irq_enabled;
} while (pending);
}
static void __init mainstone_init_irq(void)
{
int irq;
pxa27x_init_irq();
/* setup extra Mainstone irqs */
for(irq = MAINSTONE_IRQ(0); irq <= MAINSTONE_IRQ(15); irq++) {
set_irq_chip(irq, &mainstone_irq_chip);
set_irq_handler(irq, handle_level_irq);
if (irq == MAINSTONE_IRQ(10) || irq == MAINSTONE_IRQ(14))
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE | IRQF_NOAUTOEN);
else
set_irq_flags(irq, IRQF_VALID | IRQF_PROBE);
}
set_irq_flags(MAINSTONE_IRQ(8), 0);
set_irq_flags(MAINSTONE_IRQ(12), 0);
MST_INTMSKENA = 0;
MST_INTSETCLR = 0;
set_irq_chained_handler(IRQ_GPIO(0), mainstone_irq_handler);
set_irq_type(IRQ_GPIO(0), IRQT_FALLING);
}
#ifdef CONFIG_PM
static int mainstone_irq_resume(struct sys_device *dev)
{
MST_INTMSKENA = mainstone_irq_enabled;
return 0;
}
static struct sysdev_class mainstone_irq_sysclass = {
.name = "cpld_irq",
.resume = mainstone_irq_resume,
};
static struct sys_device mainstone_irq_device = {
.cls = &mainstone_irq_sysclass,
};
static int __init mainstone_irq_device_init(void)
{
int ret = -ENODEV;
if (machine_is_mainstone()) {
ret = sysdev_class_register(&mainstone_irq_sysclass);
if (ret == 0)
ret = sysdev_register(&mainstone_irq_device);
}
return ret;
}
device_initcall(mainstone_irq_device_init);
#endif
static struct resource smc91x_resources[] = {
[0] = {
.start = (MST_ETH_PHYS + 0x300),
.end = (MST_ETH_PHYS + 0xfffff),
.flags = IORESOURCE_MEM,
},
[1] = {
.start = MAINSTONE_IRQ(3),
.end = MAINSTONE_IRQ(3),
.flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE,
}
};
static struct platform_device smc91x_device = {
.name = "smc91x",
.id = 0,
.num_resources = ARRAY_SIZE(smc91x_resources),
.resource = smc91x_resources,
};
static int mst_audio_startup(struct snd_pcm_substream *substream, void *priv)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
MST_MSCWR2 &= ~MST_MSCWR2_AC97_SPKROFF;
return 0;
}
static void mst_audio_shutdown(struct snd_pcm_substream *substream, void *priv)
{
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
}
static long mst_audio_suspend_mask;
static void mst_audio_suspend(void *priv)
{
mst_audio_suspend_mask = MST_MSCWR2;
MST_MSCWR2 |= MST_MSCWR2_AC97_SPKROFF;
}
static void mst_audio_resume(void *priv)
{
MST_MSCWR2 &= mst_audio_suspend_mask | ~MST_MSCWR2_AC97_SPKROFF;
}
static pxa2xx_audio_ops_t mst_audio_ops = {
.startup = mst_audio_startup,
.shutdown = mst_audio_shutdown,
.suspend = mst_audio_suspend,
.resume = mst_audio_resume,
};
static struct platform_device mst_audio_device = {
.name = "pxa2xx-ac97",
.id = -1,
.dev = { .platform_data = &mst_audio_ops },
};
static struct resource flash_resources[] = {
[0] = {
.start = PXA_CS0_PHYS,
.end = PXA_CS0_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
[1] = {
.start = PXA_CS1_PHYS,
.end = PXA_CS1_PHYS + SZ_64M - 1,
.flags = IORESOURCE_MEM,
},
};
static struct mtd_partition mainstoneflash0_partitions[] = {
{
.name = "Bootloader",
.size = 0x00040000,
.offset = 0,
.mask_flags = MTD_WRITEABLE /* force read-only */
},{
.name = "Kernel",
.size = 0x00400000,
.offset = 0x00040000,
},{
.name = "Filesystem",
.size = MTDPART_SIZ_FULL,
.offset = 0x00440000
}
};
static struct flash_platform_data mst_flash_data[2] = {
{
.map_name = "cfi_probe",
.parts = mainstoneflash0_partitions,
.nr_parts = ARRAY_SIZE(mainstoneflash0_partitions),
}, {
.map_name = "cfi_probe",
.parts = NULL,
.nr_parts = 0,
}
};
static struct platform_device mst_flash_device[2] = {
{
.name = "pxa2xx-flash",
.id = 0,
.dev = {
.platform_data = &mst_flash_data[0],
},
.resource = &flash_resources[0],
.num_resources = 1,
},
{
.name = "pxa2xx-flash",
.id = 1,
.dev = {
.platform_data = &mst_flash_data[1],
},
.resource = &flash_resources[1],
.num_resources = 1,
},
};
#ifdef CONFIG_BACKLIGHT_CLASS_DEVICE
static int mainstone_backlight_update_status(struct backlight_device *bl)
{
int brightness = bl->props.brightness;
if (bl->props.power != FB_BLANK_UNBLANK ||
bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
if (brightness != 0)
pxa_set_cken(CKEN_PWM0, 1);
PWM_CTRL0 = 0;
PWM_PWDUTY0 = brightness;
PWM_PERVAL0 = bl->props.max_brightness;
if (brightness == 0)
pxa_set_cken(CKEN_PWM0, 0);
return 0; /* pointless return value */
}
static int mainstone_backlight_get_brightness(struct backlight_device *bl)
{
return PWM_PWDUTY0;
}
static /*const*/ struct backlight_ops mainstone_backlight_ops = {
.update_status = mainstone_backlight_update_status,
.get_brightness = mainstone_backlight_get_brightness,
};
static void __init mainstone_backlight_register(void)
{
struct backlight_device *bl;
bl = backlight_device_register("mainstone-bl", &pxa_device_fb.dev,
NULL, &mainstone_backlight_ops);
if (IS_ERR(bl)) {
printk(KERN_ERR "mainstone: unable to register backlight: %ld\n",
PTR_ERR(bl));
return;
}
/*
* broken design - register-then-setup interfaces are
* utterly broken by definition.
*/
bl->props.max_brightness = 1023;
bl->props.brightness = 1023;
backlight_update_status(bl);
}
#else
#define mainstone_backlight_register() do { } while (0)
#endif
static struct pxafb_mode_info toshiba_ltm04c380k_mode = {
.pixclock = 50000,
.xres = 640,
.yres = 480,
.bpp = 16,
.hsync_len = 1,
.left_margin = 0x9f,
.right_margin = 1,
.vsync_len = 44,
.upper_margin = 0,
.lower_margin = 0,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
};
static struct pxafb_mode_info toshiba_ltm035a776c_mode = {
.pixclock = 110000,
.xres = 240,
.yres = 320,
.bpp = 16,
.hsync_len = 4,
.left_margin = 8,
.right_margin = 20,
.vsync_len = 3,
.upper_margin = 1,
.lower_margin = 10,
.sync = FB_SYNC_HOR_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT,
};
static struct pxafb_mach_info mainstone_pxafb_info = {
.num_modes = 1,
.lccr0 = LCCR0_Act,
.lccr3 = LCCR3_PCP,
};
static int mainstone_mci_init(struct device *dev, irq_handler_t mstone_detect_int, void *data)
{
int err;
/* make sure SD/Memory Stick multiplexer's signals
* are routed to MMC controller
*/
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
err = request_irq(MAINSTONE_MMC_IRQ, mstone_detect_int, IRQF_DISABLED,
"MMC card detect", data);
if (err)
printk(KERN_ERR "mainstone_mci_init: MMC/SD: can't request MMC card detect IRQ\n");
return err;
}
static void mainstone_mci_setpower(struct device *dev, unsigned int vdd)
{
struct pxamci_platform_data* p_d = dev->platform_data;
if (( 1 << vdd) & p_d->ocr_mask) {
printk(KERN_DEBUG "%s: on\n", __func__);
MST_MSCWR1 |= MST_MSCWR1_MMC_ON;
MST_MSCWR1 &= ~MST_MSCWR1_MS_SEL;
} else {
printk(KERN_DEBUG "%s: off\n", __func__);
MST_MSCWR1 &= ~MST_MSCWR1_MMC_ON;
}
}
static void mainstone_mci_exit(struct device *dev, void *data)
{
free_irq(MAINSTONE_MMC_IRQ, data);
}
static struct pxamci_platform_data mainstone_mci_platform_data = {
.ocr_mask = MMC_VDD_32_33|MMC_VDD_33_34,
.init = mainstone_mci_init,
.setpower = mainstone_mci_setpower,
.exit = mainstone_mci_exit,
};
static void mainstone_irda_transceiver_mode(struct device *dev, int mode)
{
unsigned long flags;
local_irq_save(flags);
if (mode & IR_SIRMODE) {
MST_MSCWR1 &= ~MST_MSCWR1_IRDA_FIR;
} else if (mode & IR_FIRMODE) {
MST_MSCWR1 |= MST_MSCWR1_IRDA_FIR;
}
if (mode & IR_OFF) {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_OFF;
} else {
MST_MSCWR1 = (MST_MSCWR1 & ~MST_MSCWR1_IRDA_MASK) | MST_MSCWR1_IRDA_FULL;
}
local_irq_restore(flags);
}
static struct pxaficp_platform_data mainstone_ficp_platform_data = {
.transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF,
.transceiver_mode = mainstone_irda_transceiver_mode,
};
static struct platform_device *platform_devices[] __initdata = {
&smc91x_device,
&mst_audio_device,
&mst_flash_device[0],
&mst_flash_device[1],
};
static int mainstone_ohci_init(struct device *dev)
{
/* Set the Power Control Polarity Low and Power Sense
Polarity Low to active low. */
UHCHR = (UHCHR | UHCHR_PCPL | UHCHR_PSPL) &
~(UHCHR_SSEP1 | UHCHR_SSEP2 | UHCHR_SSEP3 | UHCHR_SSE);
return 0;
}
static struct pxaohci_platform_data mainstone_ohci_platform_data = {
.port_mode = PMM_PERPORT_MODE,
.init = mainstone_ohci_init,
};
static void __init mainstone_init(void)
{
int SW7 = 0; /* FIXME: get from SCR (Mst doc section 3.2.1.1) */
pxa2xx_mfp_config(ARRAY_AND_SIZE(mainstone_pin_config));
mst_flash_data[0].width = (BOOT_DEF & 1) ? 2 : 4;
mst_flash_data[1].width = 4;
/* Compensate for SW7 which swaps the flash banks */
mst_flash_data[SW7].name = "processor-flash";
mst_flash_data[SW7 ^ 1].name = "mainboard-flash";
printk(KERN_NOTICE "Mainstone configured to boot from %s\n",
mst_flash_data[0].name);
/* system bus arbiter setting
* - Core_Park
* - LCD_wt:DMA_wt:CORE_Wt = 2:3:4
*/
ARB_CNTRL = ARB_CORE_PARK | 0x234;
platform_add_devices(platform_devices, ARRAY_SIZE(platform_devices));
/* reading Mainstone's "Virtual Configuration Register"
might be handy to select LCD type here */
if (0)
mainstone_pxafb_info.modes = &toshiba_ltm04c380k_mode;
else
mainstone_pxafb_info.modes = &toshiba_ltm035a776c_mode;
set_pxa_fb_info(&mainstone_pxafb_info);
mainstone_backlight_register();
pxa_set_mci_info(&mainstone_mci_platform_data);
pxa_set_ficp_info(&mainstone_ficp_platform_data);
pxa_set_ohci_info(&mainstone_ohci_platform_data);
}
static struct map_desc mainstone_io_desc[] __initdata = {
{ /* CPLD */
.virtual = MST_FPGA_VIRT,
.pfn = __phys_to_pfn(MST_FPGA_PHYS),
.length = 0x00100000,
.type = MT_DEVICE
}
};
static void __init mainstone_map_io(void)
{
pxa_map_io();
iotable_init(mainstone_io_desc, ARRAY_SIZE(mainstone_io_desc));
/* for use I SRAM as framebuffer. */
PSLR |= 0xF04;
PCFR = 0x66;
}
MACHINE_START(MAINSTONE, "Intel HCDDBBVA0 Development Platform (aka Mainstone)")
/* Maintainer: MontaVista Software Inc. */
.phys_io = 0x40000000,
.boot_params = 0xa0000100, /* BLOB boot parameter setting */
.io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc,
.map_io = mainstone_map_io,
.init_irq = mainstone_init_irq,
.timer = &pxa_timer,
.init_machine = mainstone_init,
MACHINE_END