linux/arch/mips/jz4740
Linus Torvalds c2fc71c9b7 JFFS2 changes:
- Support 64-bit timestamps
 
 MTD changes:
   Core changes:
   - Support sub-partitions
   - Clarify mtd_oob_ops documentation
   - Make Kconfig formatting consistent
   - Fix potential overflows in mtdchar_{write,read}()
   - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
     and no OOB data were requested
   - Remove VLA usage in the bch lib
 
   Driver changes:
   - Use mtd_device_register() instead of mtd_device_parse_register()
     where applicable
   - Use proper printk format to print physical addresses in the
     solutionengine driver
   - Add missing mtd_set_of_node() call in the powernv driver
   - Remove unneeded variables in a few drivers
   - Plug the TRX part parser to the DT partition parsers logic
   - Check ioremap_cache() return code in the gpio-addr-flash driver
   - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c
 
 SPI NOR changes:
   Core changes:
   - Apply reset hacks only when reset is explicitly marked as broken in
     the DT
 
    Driver changes:
    - Minor cleanup/fixes in the m25p80 driver
    - Release flash_np in the nxp-spifi driver
    - Add suspend/resume hooks to the atmel-quadspi driver
    - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
      driver
    - Use %pK instead of %p in the stm32-quadspi driver
    - Improve timeout handling in the cadence-quadspi driver
    - Use mtd_device_register() instead of mtd_device_parse_register()
      in the intel-spi driver
 
 NAND changes:
   Core changes:
   - Add the SPI-NAND framework.
   - Create a helper to find the best ECC configuration.
   - Create NAND controller operations.
   - Allocate dynamically ONFI parameters structure.
   - Add defines for ONFI version bits.
   - Add manufacturer fixup for ONFI parameter page.
   - Add an option to specify NAND chip as a boot device.
   - Add Reed-Solomon error correction algorithm.
   - Better name for the controller structure.
   - Remove unused caller_is_module() definition.
   - Make subop helpers return unsigned values.
   - Expose _notsupp() helpers for raw page accessors.
   - Add default values for dynamic timings.
   - Kill the chip->scan_bbt() hook.
   - Rename nand_default_bbt() into nand_create_bbt().
   - Start to clean the nand_chip structure.
   - Remove stale prototype from rawnand.h.
 
   Raw NAND controllers drivers changes:
   - Qcom: structuring cleanup.
   - Denali: use core helper to find the best ECC configuration.
   - Possible build of almost all drivers by adding a dependency on
     COMPILE_TEST for almost all of them in Kconfig, implies various
     fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
     changes in sparc64 and ia64 architectures.
   - Clean the ->probe() functions error path of a lot of drivers.
   - Migrate all drivers to use nand_scan() instead of
     nand_scan_ident()/nand_scan_tail() pair.
   - Use mtd_device_register() where applicable to simplify the code.
   - Marvell:
     * Handle on-die ECC.
     * Better clocks handling.
     * Remove bogus comment.
     * Add suspend and resume support.
   - Tegra: add NAND controller driver.
   - Atmel:
     * Add module param to avoid using dma.
     * Drop Wenyou Yang from MAINTAINERS.
   - Denali: optimize timings handling.
   - FSMC: Stop using chip->read_buf().
   - FSL:
     * Switch to SPDX license tag identifiers.
     * Fix qualifiers in MXC init functions.
 
   Raw NAND chip drivers changes:
   - Micron:
     * Add fixup for ONFI revision.
     * Update ecc_stats.corrected.
     * Make ECC activation stateful.
     * Avoid enabling/disabling ECC when it can't be disabled.
     * Get the actual number of bitflips.
     * Allow forced on-die ECC.
     * Support 8/512 on-die ECC.
     * Fix on-die ECC detection logic.
   - Hynix:
     * Fix decoding the OOB size on H27UCG8T2BTR.
     * Use ->exec_op() in hynix_nand_reg_write_op().
 -----BEGIN PGP SIGNATURE-----
 
 iQI5BAABCAAjBQJbcSYdHBxib3Jpcy5icmV6aWxsb25AYm9vdGxpbi5jb20ACgkQ
 Ze02AX4ItwA85Q//ViUNiWoluaj7q3Kpv44NZZClPjVfirDtIHEfyzob7HbkrqjT
 ivjNUu5cjKU2aqptR24UzIV2lwmaSGicIzvyANN5bNedHy8tb4BWXo1iTEflXc1P
 lYihrRz7AeHQqdrOYAiHxq0fcqgIm2NjCDxfdtkP1HJsMQH+LgvoosOkd8RyLF8E
 jV5IyreTfg10AiVS44yvnqdsYo7GDVZRgnx1dBRbdJ+WwZS05m6LSeNu0ivgfLMM
 NmISrn7pzlMYnuDkzckXwVka7STFhV9befoSCmAHedqNEHtzaGDaNMLEilaC4WzV
 1yvsdRGI3hDkdO4s44nP/Vs2XlVmCevuTpOOQ1dEK94Bbek+us7NEPjxOIAf22jE
 5MVZR6vpNN7JXJ+nvEZjjL8X9zysqZgk2r6os35Wi2zJK7iHIrFpjlMYwTJfVPzv
 JKabOQZuOUqRACbL0isTTdG0+Tzr1BxaQqFiFUteQ9QpG4nSifoHUmI+9XUCJmil
 iGTOy6rEkaMd6qu3xapPtZbxGbUbvcLiJvNrZ02ZfsELDAELowz66O0PX6rSwTV9
 NIWeVNXK9Bsp0oxbb8P8oJIB5K4F6vqncPBls34J7E/xrLO9nLk1VvFQrGqzuwwP
 HmEdgcRwKeXrvJITZz2u0u6lrKpgdDA3FTqfGCNec51PCgb1FwxcpKF/Xz0=
 =yIkF
 -----END PGP SIGNATURE-----

Merge tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd

Pull mtd updates from Boris Brezillon:
 "JFFS2 changes:
   - Support 64-bit timestamps

  MTD core changes:
   - Support sub-partitions
   - Clarify mtd_oob_ops documentation
   - Make Kconfig formatting consistent
   - Fix potential overflows in mtdchar_{write,read}()
   - Fallback to ->_{read,write}() when ->_{read,write}_oob() is missing
     and no OOB data were requested
   - Remove VLA usage in the bch lib

  MTD driver changes:
   - Use mtd_device_register() instead of mtd_device_parse_register()
     where applicable
   - Use proper printk format to print physical addresses in the
     solutionengine driver
   - Add missing mtd_set_of_node() call in the powernv driver
   - Remove unneeded variables in a few drivers
   - Plug the TRX part parser to the DT partition parsers logic
   - Check ioremap_cache() return code in the gpio-addr-flash driver
   - Stop using VMLINUX_SYMBOL_STR() in gen_probe.c

  SPI NOR core changes:
   - Apply reset hacks only when reset is explicitly marked as broken in
     the DT

   SPI NOR driver changes:
   - Minor cleanup/fixes in the m25p80 driver
   - Release flash_np in the nxp-spifi driver
   - Add suspend/resume hooks to the atmel-quadspi driver
   - Include gpio/consumer.h instead of gpio.h in the atmel-quadspi
     driver
   - Use %pK instead of %p in the stm32-quadspi driver
   - Improve timeout handling in the cadence-quadspi driver
   - Use mtd_device_register() instead of mtd_device_parse_register() in
     the intel-spi driver

  NAND core changes:
   - Add the SPI-NAND framework.
   - Create a helper to find the best ECC configuration.
   - Create NAND controller operations.
   - Allocate dynamically ONFI parameters structure.
   - Add defines for ONFI version bits.
   - Add manufacturer fixup for ONFI parameter page.
   - Add an option to specify NAND chip as a boot device.
   - Add Reed-Solomon error correction algorithm.
   - Better name for the controller structure.
   - Remove unused caller_is_module() definition.
   - Make subop helpers return unsigned values.
   - Expose _notsupp() helpers for raw page accessors.
   - Add default values for dynamic timings.
   - Kill the chip->scan_bbt() hook.
   - Rename nand_default_bbt() into nand_create_bbt().
   - Start to clean the nand_chip structure.
   - Remove stale prototype from rawnand.h.

  Raw NAND controllers drivers changes:
   - Qcom: structuring cleanup.
   - Denali: use core helper to find the best ECC configuration.
   - Possible build of almost all drivers by adding a dependency on
     COMPILE_TEST for almost all of them in Kconfig, implies various
     fixes, Kconfig cleanup, GPIO headers inclusion cleanup, and even
     changes in sparc64 and ia64 architectures.
   - Clean the ->probe() functions error path of a lot of drivers.
   - Migrate all drivers to use nand_scan() instead of
     nand_scan_ident()/nand_scan_tail() pair.
   - Use mtd_device_register() where applicable to simplify the code.
   - Marvell:
      * Handle on-die ECC.
      * Better clocks handling.
      * Remove bogus comment.
      * Add suspend and resume support.
   - Tegra: add NAND controller driver.
   - Atmel:
      * Add module param to avoid using dma.
      * Drop Wenyou Yang from MAINTAINERS.
   - Denali: optimize timings handling.
   - FSMC: Stop using chip->read_buf().
   - FSL:
      * Switch to SPDX license tag identifiers.
      * Fix qualifiers in MXC init functions.

  Raw NAND chip drivers changes:
   - Micron:
      * Add fixup for ONFI revision.
      * Update ecc_stats.corrected.
      * Make ECC activation stateful.
      * Avoid enabling/disabling ECC when it can't be disabled.
      * Get the actual number of bitflips.
      * Allow forced on-die ECC.
      * Support 8/512 on-die ECC.
      * Fix on-die ECC detection logic.
   - Hynix:
      * Fix decoding the OOB size on H27UCG8T2BTR.
      * Use ->exec_op() in hynix_nand_reg_write_op()"

* tag 'mtd/for-4.19' of git://git.infradead.org/linux-mtd: (188 commits)
  mtd: rawnand: atmel: Select GENERIC_ALLOCATOR
  MAINTAINERS: drop Wenyou Yang from Atmel NAND driver support
  mtd: rawnand: allocate dynamically ONFI parameters during detection
  mtd: spi-nor: only apply reset hacks to broken hardware
  mtd: spi-nor: cadence-quadspi: fix timeout handling
  mtd: spi-nor: atmel-quadspi: Include gpio/consumer.h instead of gpio.h
  mtd: spi-nor: intel-spi: use mtd_device_register()
  mtd: spi-nor: stm32-quadspi: replace "%p" with "%pK"
  mtd: spi-nor: atmel-quadspi: add suspend/resume hooks
  mtd: rawnand: allocate model parameter dynamically
  mtd: rawnand: do not export nand_scan_[ident|tail]() anymore
  mtd: rawnand: txx9ndfmc: convert driver to nand_scan()
  mtd: rawnand: txx9ndfmc: clarify ECC parameters assignation
  mtd: rawnand: tegra: convert driver to nand_scan()
  mtd: rawnand: jz4740: convert driver to nand_scan()
  mtd: rawnand: jz4740: group nand_scan_{ident, tail} calls
  mtd: rawnand: jz4740: fix probe function error path
  mtd: rawnand: docg4: convert driver to nand_scan()
  mtd: rawnand: do not execute nand_scan_ident() if maxchips is zero
  mtd: rawnand: atmel: convert driver to nand_scan()
  ...
2018-08-14 10:57:44 -07:00
..
board-qi_lb60.c MIPS: jz4740: Move jz4740_nand.h header to include/linux/platform_data/jz4740 2018-07-18 10:10:23 +02:00
Kconfig MIPS: ingenic: Initial GCW Zero support 2018-01-18 22:08:10 +00:00
Makefile License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
Platform MIPS: jz4740: Bump zload address 2018-07-23 17:35:19 -07:00
platform.c MIPS: JZ4740: dts: Add bindings for the jz4740-wdt driver 2018-05-14 23:58:23 +01:00
pm.c MIPS: JZ4740: remove clock.h 2015-06-21 21:53:21 +02:00
prom.c MIPS: ingenic: Detect machtype from SoC compatible string 2018-01-18 22:07:24 +00:00
reset.c MIPS: JZ4740: Drop old platform reset code 2018-05-14 23:58:23 +01:00
reset.h License cleanup: add SPDX GPL-2.0 license identifier to files with no license 2017-11-02 11:10:55 +01:00
setup.c MIPS: ingenic: Detect machtype from SoC compatible string 2018-01-18 22:07:24 +00:00
time.c MIPS: ingenic: Initial JZ4770 support 2018-01-18 22:07:31 +00:00
timer.c MIPS: Audit and remove any unnecessary uses of module.h 2017-02-14 09:00:25 +00:00