mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
bd8f1a31a9
Remove SPI_DUMP_SKB and I2C_DUMP_SKB as skb is already dumped in ndlc layer. Signed-off-by: Christophe Ricard <christophe-h.ricard@st.com> Signed-off-by: Samuel Ortiz <sameo@linux.intel.com>
385 lines
8.9 KiB
C
385 lines
8.9 KiB
C
/*
|
|
* I2C Link Layer for ST NCI NFC controller familly based Driver
|
|
* Copyright (C) 2014-2015 STMicroelectronics SAS. All rights reserved.
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms and conditions of the GNU General Public License,
|
|
* version 2, as published by the Free Software Foundation.
|
|
*
|
|
* This program is distributed in the hope that it will be useful,
|
|
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
* GNU General Public License for more details.
|
|
*
|
|
* You should have received a copy of the GNU General Public License
|
|
* along with this program; if not, see <http://www.gnu.org/licenses/>.
|
|
*/
|
|
|
|
#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/i2c.h>
|
|
#include <linux/gpio.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_gpio.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/nfc.h>
|
|
#include <linux/platform_data/st-nci.h>
|
|
|
|
#include "st-nci.h"
|
|
|
|
#define DRIVER_DESC "NCI NFC driver for ST_NCI"
|
|
|
|
/* ndlc header */
|
|
#define ST_NCI_FRAME_HEADROOM 1
|
|
#define ST_NCI_FRAME_TAILROOM 0
|
|
|
|
#define ST_NCI_I2C_MIN_SIZE 4 /* PCB(1) + NCI Packet header(3) */
|
|
#define ST_NCI_I2C_MAX_SIZE 250 /* req 4.2.1 */
|
|
|
|
#define ST_NCI_I2C_DRIVER_NAME "st_nci_i2c"
|
|
|
|
static struct i2c_device_id st_nci_i2c_id_table[] = {
|
|
{ST_NCI_DRIVER_NAME, 0},
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(i2c, st_nci_i2c_id_table);
|
|
|
|
struct st_nci_i2c_phy {
|
|
struct i2c_client *i2c_dev;
|
|
struct llt_ndlc *ndlc;
|
|
|
|
bool irq_active;
|
|
|
|
unsigned int gpio_reset;
|
|
unsigned int irq_polarity;
|
|
|
|
struct st_nci_se_status se_status;
|
|
};
|
|
|
|
static int st_nci_i2c_enable(void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
|
|
gpio_set_value(phy->gpio_reset, 0);
|
|
usleep_range(10000, 15000);
|
|
gpio_set_value(phy->gpio_reset, 1);
|
|
usleep_range(80000, 85000);
|
|
|
|
if (phy->ndlc->powered == 0 && phy->irq_active == 0) {
|
|
enable_irq(phy->i2c_dev->irq);
|
|
phy->irq_active = true;
|
|
}
|
|
|
|
return 0;
|
|
}
|
|
|
|
static void st_nci_i2c_disable(void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
|
|
disable_irq_nosync(phy->i2c_dev->irq);
|
|
phy->irq_active = false;
|
|
}
|
|
|
|
/*
|
|
* Writing a frame must not return the number of written bytes.
|
|
* It must return either zero for success, or <0 for error.
|
|
* In addition, it must not alter the skb
|
|
*/
|
|
static int st_nci_i2c_write(void *phy_id, struct sk_buff *skb)
|
|
{
|
|
int r = -1;
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
if (phy->ndlc->hard_fault != 0)
|
|
return phy->ndlc->hard_fault;
|
|
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
if (r < 0) { /* Retry, chip was in standby */
|
|
usleep_range(1000, 4000);
|
|
r = i2c_master_send(client, skb->data, skb->len);
|
|
}
|
|
|
|
if (r >= 0) {
|
|
if (r != skb->len)
|
|
r = -EREMOTEIO;
|
|
else
|
|
r = 0;
|
|
}
|
|
|
|
return r;
|
|
}
|
|
|
|
/*
|
|
* Reads an ndlc frame and returns it in a newly allocated sk_buff.
|
|
* returns:
|
|
* 0 : if received frame is complete
|
|
* -EREMOTEIO : i2c read error (fatal)
|
|
* -EBADMSG : frame was incorrect and discarded
|
|
* -ENOMEM : cannot allocate skb, frame dropped
|
|
*/
|
|
static int st_nci_i2c_read(struct st_nci_i2c_phy *phy,
|
|
struct sk_buff **skb)
|
|
{
|
|
int r;
|
|
u8 len;
|
|
u8 buf[ST_NCI_I2C_MAX_SIZE];
|
|
struct i2c_client *client = phy->i2c_dev;
|
|
|
|
r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
|
|
if (r < 0) { /* Retry, chip was in standby */
|
|
usleep_range(1000, 4000);
|
|
r = i2c_master_recv(client, buf, ST_NCI_I2C_MIN_SIZE);
|
|
}
|
|
|
|
if (r != ST_NCI_I2C_MIN_SIZE)
|
|
return -EREMOTEIO;
|
|
|
|
len = be16_to_cpu(*(__be16 *) (buf + 2));
|
|
if (len > ST_NCI_I2C_MAX_SIZE) {
|
|
nfc_err(&client->dev, "invalid frame len\n");
|
|
return -EBADMSG;
|
|
}
|
|
|
|
*skb = alloc_skb(ST_NCI_I2C_MIN_SIZE + len, GFP_KERNEL);
|
|
if (*skb == NULL)
|
|
return -ENOMEM;
|
|
|
|
skb_reserve(*skb, ST_NCI_I2C_MIN_SIZE);
|
|
skb_put(*skb, ST_NCI_I2C_MIN_SIZE);
|
|
memcpy((*skb)->data, buf, ST_NCI_I2C_MIN_SIZE);
|
|
|
|
if (!len)
|
|
return 0;
|
|
|
|
r = i2c_master_recv(client, buf, len);
|
|
if (r != len) {
|
|
kfree_skb(*skb);
|
|
return -EREMOTEIO;
|
|
}
|
|
|
|
skb_put(*skb, len);
|
|
memcpy((*skb)->data + ST_NCI_I2C_MIN_SIZE, buf, len);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/*
|
|
* Reads an ndlc frame from the chip.
|
|
*
|
|
* On ST_NCI, IRQ goes in idle state when read starts.
|
|
*/
|
|
static irqreturn_t st_nci_irq_thread_fn(int irq, void *phy_id)
|
|
{
|
|
struct st_nci_i2c_phy *phy = phy_id;
|
|
struct i2c_client *client;
|
|
struct sk_buff *skb = NULL;
|
|
int r;
|
|
|
|
if (!phy || !phy->ndlc || irq != phy->i2c_dev->irq) {
|
|
WARN_ON_ONCE(1);
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
client = phy->i2c_dev;
|
|
dev_dbg(&client->dev, "IRQ\n");
|
|
|
|
if (phy->ndlc->hard_fault)
|
|
return IRQ_HANDLED;
|
|
|
|
if (!phy->ndlc->powered) {
|
|
st_nci_i2c_disable(phy);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
r = st_nci_i2c_read(phy, &skb);
|
|
if (r == -EREMOTEIO || r == -ENOMEM || r == -EBADMSG)
|
|
return IRQ_HANDLED;
|
|
|
|
ndlc_recv(phy->ndlc, skb);
|
|
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
static struct nfc_phy_ops i2c_phy_ops = {
|
|
.write = st_nci_i2c_write,
|
|
.enable = st_nci_i2c_enable,
|
|
.disable = st_nci_i2c_disable,
|
|
};
|
|
|
|
#ifdef CONFIG_OF
|
|
static int st_nci_i2c_of_request_resources(struct i2c_client *client)
|
|
{
|
|
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
|
|
struct device_node *pp;
|
|
int gpio;
|
|
int r;
|
|
|
|
pp = client->dev.of_node;
|
|
if (!pp)
|
|
return -ENODEV;
|
|
|
|
/* Get GPIO from device tree */
|
|
gpio = of_get_named_gpio(pp, "reset-gpios", 0);
|
|
if (gpio < 0) {
|
|
nfc_err(&client->dev,
|
|
"Failed to retrieve reset-gpios from device tree\n");
|
|
return gpio;
|
|
}
|
|
|
|
/* GPIO request and configuration */
|
|
r = devm_gpio_request_one(&client->dev, gpio,
|
|
GPIOF_OUT_INIT_HIGH, "clf_reset");
|
|
if (r) {
|
|
nfc_err(&client->dev, "Failed to request reset pin\n");
|
|
return r;
|
|
}
|
|
phy->gpio_reset = gpio;
|
|
|
|
phy->irq_polarity = irq_get_trigger_type(client->irq);
|
|
|
|
phy->se_status.is_ese_present =
|
|
of_property_read_bool(pp, "ese-present");
|
|
phy->se_status.is_uicc_present =
|
|
of_property_read_bool(pp, "uicc-present");
|
|
|
|
return 0;
|
|
}
|
|
#else
|
|
static int st_nci_i2c_of_request_resources(struct i2c_client *client)
|
|
{
|
|
return -ENODEV;
|
|
}
|
|
#endif
|
|
|
|
static int st_nci_i2c_request_resources(struct i2c_client *client)
|
|
{
|
|
struct st_nci_nfc_platform_data *pdata;
|
|
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
|
|
int r;
|
|
|
|
pdata = client->dev.platform_data;
|
|
if (pdata == NULL) {
|
|
nfc_err(&client->dev, "No platform data\n");
|
|
return -EINVAL;
|
|
}
|
|
|
|
/* store for later use */
|
|
phy->gpio_reset = pdata->gpio_reset;
|
|
phy->irq_polarity = pdata->irq_polarity;
|
|
|
|
r = devm_gpio_request_one(&client->dev,
|
|
phy->gpio_reset, GPIOF_OUT_INIT_HIGH, "clf_reset");
|
|
if (r) {
|
|
pr_err("%s : reset gpio_request failed\n", __FILE__);
|
|
return r;
|
|
}
|
|
|
|
phy->se_status.is_ese_present = pdata->is_ese_present;
|
|
phy->se_status.is_uicc_present = pdata->is_uicc_present;
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int st_nci_i2c_probe(struct i2c_client *client,
|
|
const struct i2c_device_id *id)
|
|
{
|
|
struct st_nci_i2c_phy *phy;
|
|
struct st_nci_nfc_platform_data *pdata;
|
|
int r;
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
dev_dbg(&client->dev, "IRQ: %d\n", client->irq);
|
|
|
|
if (!i2c_check_functionality(client->adapter, I2C_FUNC_I2C)) {
|
|
nfc_err(&client->dev, "Need I2C_FUNC_I2C\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
phy = devm_kzalloc(&client->dev, sizeof(struct st_nci_i2c_phy),
|
|
GFP_KERNEL);
|
|
if (!phy)
|
|
return -ENOMEM;
|
|
|
|
phy->i2c_dev = client;
|
|
|
|
i2c_set_clientdata(client, phy);
|
|
|
|
pdata = client->dev.platform_data;
|
|
if (!pdata && client->dev.of_node) {
|
|
r = st_nci_i2c_of_request_resources(client);
|
|
if (r) {
|
|
nfc_err(&client->dev, "No platform data\n");
|
|
return r;
|
|
}
|
|
} else if (pdata) {
|
|
r = st_nci_i2c_request_resources(client);
|
|
if (r) {
|
|
nfc_err(&client->dev,
|
|
"Cannot get platform resources\n");
|
|
return r;
|
|
}
|
|
} else {
|
|
nfc_err(&client->dev,
|
|
"st_nci platform resources not available\n");
|
|
return -ENODEV;
|
|
}
|
|
|
|
r = ndlc_probe(phy, &i2c_phy_ops, &client->dev,
|
|
ST_NCI_FRAME_HEADROOM, ST_NCI_FRAME_TAILROOM,
|
|
&phy->ndlc, &phy->se_status);
|
|
if (r < 0) {
|
|
nfc_err(&client->dev, "Unable to register ndlc layer\n");
|
|
return r;
|
|
}
|
|
|
|
phy->irq_active = true;
|
|
r = devm_request_threaded_irq(&client->dev, client->irq, NULL,
|
|
st_nci_irq_thread_fn,
|
|
phy->irq_polarity | IRQF_ONESHOT,
|
|
ST_NCI_DRIVER_NAME, phy);
|
|
if (r < 0)
|
|
nfc_err(&client->dev, "Unable to register IRQ handler\n");
|
|
|
|
return r;
|
|
}
|
|
|
|
static int st_nci_i2c_remove(struct i2c_client *client)
|
|
{
|
|
struct st_nci_i2c_phy *phy = i2c_get_clientdata(client);
|
|
|
|
dev_dbg(&client->dev, "%s\n", __func__);
|
|
|
|
ndlc_remove(phy->ndlc);
|
|
|
|
return 0;
|
|
}
|
|
|
|
#ifdef CONFIG_OF
|
|
static const struct of_device_id of_st_nci_i2c_match[] = {
|
|
{ .compatible = "st,st21nfcb-i2c", },
|
|
{ .compatible = "st,st21nfcb_i2c", },
|
|
{ .compatible = "st,st21nfcc-i2c", },
|
|
{}
|
|
};
|
|
MODULE_DEVICE_TABLE(of, of_st_nci_i2c_match);
|
|
#endif
|
|
|
|
static struct i2c_driver st_nci_i2c_driver = {
|
|
.driver = {
|
|
.owner = THIS_MODULE,
|
|
.name = ST_NCI_I2C_DRIVER_NAME,
|
|
.of_match_table = of_match_ptr(of_st_nci_i2c_match),
|
|
},
|
|
.probe = st_nci_i2c_probe,
|
|
.id_table = st_nci_i2c_id_table,
|
|
.remove = st_nci_i2c_remove,
|
|
};
|
|
|
|
module_i2c_driver(st_nci_i2c_driver);
|
|
|
|
MODULE_LICENSE("GPL");
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|