linux/drivers/media/dvb-frontends/drx39xyj/bsp_i2c.h
Mauro Carvalho Chehab 9482354f4a [media] drx-j: Use the Linux error codes
Instead of defining its own set of error codes, use the linux
native ones.

Please note that this patch made a "stupid" error code mapping, just
replacing the codes with the closest one. In special, -EIO is being
used on several places. I'm pretty sure this could be better assigned,
but a change like that would require lots o time and efforts, without
much benefit.

So lets do adjstments at the error codes latter, when we have more
time.

Acked-by: Devin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: Mauro Carvalho Chehab <m.chehab@samsung.com>
2014-03-04 14:29:41 -03:00

140 lines
5.3 KiB
C

/*
I2C API, implementation depends on board specifics
Copyright (c), 2004-2005,2007-2010 Trident Microsystems, Inc.
All rights reserved.
Redistribution and use in source and binary forms, with or without
modification, are permitted provided that the following conditions are met:
* Redistributions of source code must retain the above copyright notice,
this list of conditions and the following disclaimer.
* Redistributions in binary form must reproduce the above copyright notice,
this list of conditions and the following disclaimer in the documentation
and/or other materials provided with the distribution.
* Neither the name of Trident Microsystems nor Hauppauge Computer Works
nor the names of its contributors may be used to endorse or promote
products derived from this software without specific prior written
permission.
THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
POSSIBILITY OF SUCH DAMAGE.
This module encapsulates I2C access.In some applications several devices
share one I2C bus. If these devices have the same I2C address some kind
off "switch" must be implemented to ensure error free communication with
one device. In case such a "switch" is used, the device ID can be used
to implement control over this "switch".
*/
#ifndef __BSPI2C_H__
#define __BSPI2C_H__
#include "bsp_types.h"
/*
* This structure contains the I2C address, the device ID and a user_data pointer.
* The user_data pointer can be used for application specific purposes.
*/
struct i2c_device_addr {
u16 i2c_addr; /* The I2C address of the device. */
u16 i2c_dev_id; /* The device identifier. */
void *user_data; /* User data pointer */
};
/**
* \def IS_I2C_10BIT( addr )
* \brief Determine if I2C address 'addr' is a 10 bits address or not.
* \param addr The I2C address.
* \return int.
* \retval 0 if address is not a 10 bits I2C address.
* \retval 1 if address is a 10 bits I2C address.
*/
#define IS_I2C_10BIT(addr) \
(((addr) & 0xF8) == 0xF0)
/*------------------------------------------------------------------------------
Exported FUNCTIONS
------------------------------------------------------------------------------*/
/**
* \fn drxbsp_i2c_init()
* \brief Initialize I2C communication module.
* \return drx_status_t Return status.
* \retval 0 Initialization successful.
* \retval -EIO Initialization failed.
*/
drx_status_t drxbsp_i2c_init(void);
/**
* \fn drxbsp_i2c_term()
* \brief Terminate I2C communication module.
* \return drx_status_t Return status.
* \retval 0 Termination successful.
* \retval -EIO Termination failed.
*/
drx_status_t drxbsp_i2c_term(void);
/**
* \fn drx_status_t drxbsp_i2c_write_read( struct i2c_device_addr *w_dev_addr,
* u16 w_count,
* u8 *wData,
* struct i2c_device_addr *r_dev_addr,
* u16 r_count,
* u8 *r_data)
* \brief Read and/or write count bytes from I2C bus, store them in data[].
* \param w_dev_addr The device i2c address and the device ID to write to
* \param w_count The number of bytes to write
* \param wData The array to write the data to
* \param r_dev_addr The device i2c address and the device ID to read from
* \param r_count The number of bytes to read
* \param r_data The array to read the data from
* \return drx_status_t Return status.
* \retval 0 Succes.
* \retval -EIO Failure.
* \retval -EINVAL Parameter 'wcount' is not zero but parameter
* 'wdata' contains NULL.
* Idem for 'rcount' and 'rdata'.
* Both w_dev_addr and r_dev_addr are NULL.
*
* This function must implement an atomic write and/or read action on the I2C bus
* No other process may use the I2C bus when this function is executing.
* The critical section of this function runs from and including the I2C
* write, up to and including the I2C read action.
*
* The device ID can be useful if several devices share an I2C address.
* It can be used to control a "switch" on the I2C bus to the correct device.
*/
drx_status_t drxbsp_i2c_write_read(struct i2c_device_addr *w_dev_addr,
u16 w_count,
u8 *w_data,
struct i2c_device_addr *r_dev_addr,
u16 r_count, u8 *r_data);
/**
* \fn drxbsp_i2c_error_text()
* \brief Returns a human readable error.
* Counter part of numerical drx_i2c_error_g.
*
* \return char* Pointer to human readable error text.
*/
char *drxbsp_i2c_error_text(void);
/**
* \var drx_i2c_error_g;
* \brief I2C specific error codes, platform dependent.
*/
extern int drx_i2c_error_g;
#endif /* __BSPI2C_H__ */