linux/drivers/irqchip/irq-gic-v4.c
Johan Hovold 0e2213fe0a irqchip: Use irq_domain_alloc_irqs()
Use the irq_domain_alloc_irqs() wrapper instead of the full
__irq_domain_alloc_irqs() interface, which was only intended for some
legacy (x86) use cases.

Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20221213140844.15470-2-johan+linaro@kernel.org
2023-01-11 19:51:39 +01:00

390 lines
9.4 KiB
C

// SPDX-License-Identifier: GPL-2.0-only
/*
* Copyright (C) 2016,2017 ARM Limited, All Rights Reserved.
* Author: Marc Zyngier <marc.zyngier@arm.com>
*/
#include <linux/interrupt.h>
#include <linux/irq.h>
#include <linux/irqdomain.h>
#include <linux/msi.h>
#include <linux/sched.h>
#include <linux/irqchip/arm-gic-v4.h>
/*
* WARNING: The blurb below assumes that you understand the
* intricacies of GICv3, GICv4, and how a guest's view of a GICv3 gets
* translated into GICv4 commands. So it effectively targets at most
* two individuals. You know who you are.
*
* The core GICv4 code is designed to *avoid* exposing too much of the
* core GIC code (that would in turn leak into the hypervisor code),
* and instead provide a hypervisor agnostic interface to the HW (of
* course, the astute reader will quickly realize that hypervisor
* agnostic actually means KVM-specific - what were you thinking?).
*
* In order to achieve a modicum of isolation, we try to hide most of
* the GICv4 "stuff" behind normal irqchip operations:
*
* - Any guest-visible VLPI is backed by a Linux interrupt (and a
* physical LPI which gets unmapped when the guest maps the
* VLPI). This allows the same DevID/EventID pair to be either
* mapped to the LPI (host) or the VLPI (guest). Note that this is
* exclusive, and you cannot have both.
*
* - Enabling/disabling a VLPI is done by issuing mask/unmask calls.
*
* - Guest INT/CLEAR commands are implemented through
* irq_set_irqchip_state().
*
* - The *bizarre* stuff (mapping/unmapping an interrupt to a VLPI, or
* issuing an INV after changing a priority) gets shoved into the
* irq_set_vcpu_affinity() method. While this is quite horrible
* (let's face it, this is the irqchip version of an ioctl), it
* confines the crap to a single location. And map/unmap really is
* about setting the affinity of a VLPI to a vcpu, so only INV is
* majorly out of place. So there.
*
* A number of commands are simply not provided by this interface, as
* they do not make direct sense. For example, MAPD is purely local to
* the virtual ITS (because it references a virtual device, and the
* physical ITS is still very much in charge of the physical
* device). Same goes for things like MAPC (the physical ITS deals
* with the actual vPE affinity, and not the braindead concept of
* collection). SYNC is not provided either, as each and every command
* is followed by a VSYNC. This could be relaxed in the future, should
* this be seen as a bottleneck (yes, this means *never*).
*
* But handling VLPIs is only one side of the job of the GICv4
* code. The other (darker) side is to take care of the doorbell
* interrupts which are delivered when a VLPI targeting a non-running
* vcpu is being made pending.
*
* The choice made here is that each vcpu (VPE in old northern GICv4
* dialect) gets a single doorbell LPI, no matter how many interrupts
* are targeting it. This has a nice property, which is that the
* interrupt becomes a handle for the VPE, and that the hypervisor
* code can manipulate it through the normal interrupt API:
*
* - VMs (or rather the VM abstraction that matters to the GIC)
* contain an irq domain where each interrupt maps to a VPE. In
* turn, this domain sits on top of the normal LPI allocator, and a
* specially crafted irq_chip implementation.
*
* - mask/unmask do what is expected on the doorbell interrupt.
*
* - irq_set_affinity is used to move a VPE from one redistributor to
* another.
*
* - irq_set_vcpu_affinity once again gets hijacked for the purpose of
* creating a new sub-API, namely scheduling/descheduling a VPE
* (which involves programming GICR_V{PROP,PEND}BASER) and
* performing INVALL operations.
*/
static struct irq_domain *gic_domain;
static const struct irq_domain_ops *vpe_domain_ops;
static const struct irq_domain_ops *sgi_domain_ops;
#ifdef CONFIG_ARM64
#include <asm/cpufeature.h>
bool gic_cpuif_has_vsgi(void)
{
unsigned long fld, reg = read_sanitised_ftr_reg(SYS_ID_AA64PFR0_EL1);
fld = cpuid_feature_extract_unsigned_field(reg, ID_AA64PFR0_EL1_GIC_SHIFT);
return fld >= 0x3;
}
#else
bool gic_cpuif_has_vsgi(void)
{
return false;
}
#endif
static bool has_v4_1(void)
{
return !!sgi_domain_ops;
}
static bool has_v4_1_sgi(void)
{
return has_v4_1() && gic_cpuif_has_vsgi();
}
static int its_alloc_vcpu_sgis(struct its_vpe *vpe, int idx)
{
char *name;
int sgi_base;
if (!has_v4_1_sgi())
return 0;
name = kasprintf(GFP_KERNEL, "GICv4-sgi-%d", task_pid_nr(current));
if (!name)
goto err;
vpe->fwnode = irq_domain_alloc_named_id_fwnode(name, idx);
if (!vpe->fwnode)
goto err;
kfree(name);
name = NULL;
vpe->sgi_domain = irq_domain_create_linear(vpe->fwnode, 16,
sgi_domain_ops, vpe);
if (!vpe->sgi_domain)
goto err;
sgi_base = irq_domain_alloc_irqs(vpe->sgi_domain, 16, NUMA_NO_NODE, vpe);
if (sgi_base <= 0)
goto err;
return 0;
err:
if (vpe->sgi_domain)
irq_domain_remove(vpe->sgi_domain);
if (vpe->fwnode)
irq_domain_free_fwnode(vpe->fwnode);
kfree(name);
return -ENOMEM;
}
int its_alloc_vcpu_irqs(struct its_vm *vm)
{
int vpe_base_irq, i;
vm->fwnode = irq_domain_alloc_named_id_fwnode("GICv4-vpe",
task_pid_nr(current));
if (!vm->fwnode)
goto err;
vm->domain = irq_domain_create_hierarchy(gic_domain, 0, vm->nr_vpes,
vm->fwnode, vpe_domain_ops,
vm);
if (!vm->domain)
goto err;
for (i = 0; i < vm->nr_vpes; i++) {
vm->vpes[i]->its_vm = vm;
vm->vpes[i]->idai = true;
}
vpe_base_irq = irq_domain_alloc_irqs(vm->domain, vm->nr_vpes,
NUMA_NO_NODE, vm);
if (vpe_base_irq <= 0)
goto err;
for (i = 0; i < vm->nr_vpes; i++) {
int ret;
vm->vpes[i]->irq = vpe_base_irq + i;
ret = its_alloc_vcpu_sgis(vm->vpes[i], i);
if (ret)
goto err;
}
return 0;
err:
if (vm->domain)
irq_domain_remove(vm->domain);
if (vm->fwnode)
irq_domain_free_fwnode(vm->fwnode);
return -ENOMEM;
}
static void its_free_sgi_irqs(struct its_vm *vm)
{
int i;
if (!has_v4_1_sgi())
return;
for (i = 0; i < vm->nr_vpes; i++) {
unsigned int irq = irq_find_mapping(vm->vpes[i]->sgi_domain, 0);
if (WARN_ON(!irq))
continue;
irq_domain_free_irqs(irq, 16);
irq_domain_remove(vm->vpes[i]->sgi_domain);
irq_domain_free_fwnode(vm->vpes[i]->fwnode);
}
}
void its_free_vcpu_irqs(struct its_vm *vm)
{
its_free_sgi_irqs(vm);
irq_domain_free_irqs(vm->vpes[0]->irq, vm->nr_vpes);
irq_domain_remove(vm->domain);
irq_domain_free_fwnode(vm->fwnode);
}
static int its_send_vpe_cmd(struct its_vpe *vpe, struct its_cmd_info *info)
{
return irq_set_vcpu_affinity(vpe->irq, info);
}
int its_make_vpe_non_resident(struct its_vpe *vpe, bool db)
{
struct irq_desc *desc = irq_to_desc(vpe->irq);
struct its_cmd_info info = { };
int ret;
WARN_ON(preemptible());
info.cmd_type = DESCHEDULE_VPE;
if (has_v4_1()) {
/* GICv4.1 can directly deal with doorbells */
info.req_db = db;
} else {
/* Undo the nested disable_irq() calls... */
while (db && irqd_irq_disabled(&desc->irq_data))
enable_irq(vpe->irq);
}
ret = its_send_vpe_cmd(vpe, &info);
if (!ret)
vpe->resident = false;
vpe->ready = false;
return ret;
}
int its_make_vpe_resident(struct its_vpe *vpe, bool g0en, bool g1en)
{
struct its_cmd_info info = { };
int ret;
WARN_ON(preemptible());
info.cmd_type = SCHEDULE_VPE;
if (has_v4_1()) {
info.g0en = g0en;
info.g1en = g1en;
} else {
/* Disabled the doorbell, as we're about to enter the guest */
disable_irq_nosync(vpe->irq);
}
ret = its_send_vpe_cmd(vpe, &info);
if (!ret)
vpe->resident = true;
return ret;
}
int its_commit_vpe(struct its_vpe *vpe)
{
struct its_cmd_info info = {
.cmd_type = COMMIT_VPE,
};
int ret;
WARN_ON(preemptible());
ret = its_send_vpe_cmd(vpe, &info);
if (!ret)
vpe->ready = true;
return ret;
}
int its_invall_vpe(struct its_vpe *vpe)
{
struct its_cmd_info info = {
.cmd_type = INVALL_VPE,
};
return its_send_vpe_cmd(vpe, &info);
}
int its_map_vlpi(int irq, struct its_vlpi_map *map)
{
struct its_cmd_info info = {
.cmd_type = MAP_VLPI,
{
.map = map,
},
};
int ret;
/*
* The host will never see that interrupt firing again, so it
* is vital that we don't do any lazy masking.
*/
irq_set_status_flags(irq, IRQ_DISABLE_UNLAZY);
ret = irq_set_vcpu_affinity(irq, &info);
if (ret)
irq_clear_status_flags(irq, IRQ_DISABLE_UNLAZY);
return ret;
}
int its_get_vlpi(int irq, struct its_vlpi_map *map)
{
struct its_cmd_info info = {
.cmd_type = GET_VLPI,
{
.map = map,
},
};
return irq_set_vcpu_affinity(irq, &info);
}
int its_unmap_vlpi(int irq)
{
irq_clear_status_flags(irq, IRQ_DISABLE_UNLAZY);
return irq_set_vcpu_affinity(irq, NULL);
}
int its_prop_update_vlpi(int irq, u8 config, bool inv)
{
struct its_cmd_info info = {
.cmd_type = inv ? PROP_UPDATE_AND_INV_VLPI : PROP_UPDATE_VLPI,
{
.config = config,
},
};
return irq_set_vcpu_affinity(irq, &info);
}
int its_prop_update_vsgi(int irq, u8 priority, bool group)
{
struct its_cmd_info info = {
.cmd_type = PROP_UPDATE_VSGI,
{
.priority = priority,
.group = group,
},
};
return irq_set_vcpu_affinity(irq, &info);
}
int its_init_v4(struct irq_domain *domain,
const struct irq_domain_ops *vpe_ops,
const struct irq_domain_ops *sgi_ops)
{
if (domain) {
pr_info("ITS: Enabling GICv4 support\n");
gic_domain = domain;
vpe_domain_ops = vpe_ops;
sgi_domain_ops = sgi_ops;
return 0;
}
pr_err("ITS: No GICv4 VPE domain allocated\n");
return -ENODEV;
}