linux/drivers/phy
Al Cooper fc430aea02 phy: usb: PHY's MDIO registers not accessible without device installed
When there is no device connected and FSM is enabled, the XHCI puts
the PHY into suspend mode.  When the PHY is put into suspend mode
the USB LDO powers down the PHY. This causes the MDIO to be
inaccessible and its registers reset to default. The fix is to
disable FSM.

Signed-off-by: Al Cooper <alcooperx@gmail.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
2020-01-08 12:58:06 +05:30
..
allwinner phy: allwinner: add phy driver for USB3 PHY on Allwinner H6 SoC 2019-10-31 16:54:00 +05:30
amlogic phy: meson-g12a-usb3-pcie: Add support for PCIe mode 2019-10-15 14:57:32 +01:00
broadcom phy: usb: PHY's MDIO registers not accessible without device installed 2020-01-08 12:58:06 +05:30
cadence treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
freescale phy: for 5.3 2019-07-01 15:04:59 +02:00
hisilicon phy: hisilicon: Fix Kconfig indentation 2019-12-20 17:00:45 +05:30
lantiq phy: lantiq: vrx200-pcie: Remove unneeded semicolon 2020-01-08 12:58:06 +05:30
marvell ARM: SoC-related driver updates 2019-12-05 11:43:31 -08:00
mediatek treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
motorola power: supply: cpcap-charger: Enable vbus boost voltage 2019-09-02 23:08:07 +02:00
mscc treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
qualcomm phy: qcom-qmp: Add SW reset register 2020-01-08 12:58:06 +05:30
ralink treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 157 2019-05-30 11:26:37 -07:00
renesas phy: renesas: phy-rcar-gen2: Fix the array off by one warning 2019-10-31 16:54:01 +05:30
rockchip phy/rockchip: inno-dsidphy: generalize parameter handling 2020-01-08 12:58:06 +05:30
samsung phy: samsung: disable bind/unbind platform driver feature 2019-08-23 09:40:59 +05:30
socionext treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
st treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
tegra phy: tegra: use regulator_bulk_set_supply_names() 2019-10-25 17:58:13 +05:30
ti phy: ti-pipe3: make clk operations symmetric in probe and remove 2019-12-20 17:00:45 +05:30
Kconfig treewide: Add SPDX license identifier - Makefile/Kconfig 2019-05-21 10:50:46 +02:00
Makefile phy: enable compile-testing for the Lantiq PHY drivers 2019-08-23 09:40:51 +05:30
phy-core-mipi-dphy.c phy: dphy: Change units of wakeup and init parameters 2019-02-07 11:11:05 +05:30
phy-core.c phy: core: Add consumer device link support 2020-01-08 12:48:47 +05:30
phy-lpc18xx-usb-otg.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 500 2019-06-19 17:09:55 +02:00
phy-pistachio-usb.c treewide: Replace GPLv2 boilerplate/reference with SPDX - rule 422 2019-06-05 17:37:15 +02:00
phy-xgene.c phy: xgene: make array serdes_reg static const, makes object smaller 2019-10-23 13:20:26 +05:30