linux/drivers/iio/accel/Kconfig
Linus Walleij ed8959f40a iio: accel: fix Kconfig warning
commit 762227721f
"iio: accel: st_accel: handle deprecated bindings"
attempted to be smart and let users use the old I2C
driver and the new SPI driver, or the old SPI driver and
the new I2C driver in combination for the LIS3LV02,
and put the restrictions on the I2C and SPI subdrivers
not not be combined with the old subdrivers.

This doesn't work since the IIO ST accel top-level
component selects the I2C and SPI subdrivers, resulting
in the following Kconfig noise:

warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_I2C_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_I2C
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_I2C)
warning: (IIO_ST_ACCEL_3AXIS) selects IIO_ST_ACCEL_SPI_3AXIS
which has unmet direct dependencies (IIO && !SENSORS_LIS3_SPI
&& IIO_ST_ACCEL_3AXIS && IIO_ST_SENSORS_SPI)
(...)

This fixes the issue by putting the dependencies directly
in the top-level component instead, so that it never gets
to select its unselectable subcomponent.

Fixes: 762227721f ("iio: accel: st_accel: handle deprecated bindings")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
2017-01-23 09:27:30 +01:00

346 lines
9.3 KiB
Plaintext

#
# Accelerometer drivers
#
# When adding new entries keep the list in alphabetical order
menu "Accelerometers"
config BMA180
tristate "Bosch BMA180/BMA250 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Bosch BMA180 or
BMA250 triaxial acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma180.
config BMA220
tristate "Bosch BMA220 3-Axis Accelerometer Driver"
depends on SPI
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to add support for the Bosch BMA220 triaxial
acceleration sensor.
To compile this driver as a module, choose M here: the
module will be called bma220_spi.
config BMC150_ACCEL
tristate "Bosch BMC150 Accelerometer Driver"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP
select BMC150_ACCEL_I2C if I2C
select BMC150_ACCEL_SPI if SPI
help
Say yes here to build support for the following Bosch accelerometers:
BMC150, BMI055, BMA250E, BMA222E, BMA255, BMA280.
This is a combo module with both accelerometer and magnetometer.
This driver is only implementing accelerometer part, which has
its own address and register map.
config BMC150_ACCEL_I2C
tristate
select REGMAP_I2C
config BMC150_ACCEL_SPI
tristate
select REGMAP_SPI
config DA280
tristate "MiraMEMS DA280 3-axis 14-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA280 3-axis 14-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da280.
config DA311
tristate "MiraMEMS DA311 3-axis 12-bit digital accelerometer driver"
depends on I2C
help
Say yes here to build support for the MiraMEMS DA311 3-axis 12-bit
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called da311.
config DMARD06
tristate "Domintech DMARD06 Digital Accelerometer Driver"
depends on OF || COMPILE_TEST
depends on I2C
help
Say yes here to build support for the Domintech low-g tri-axial
digital accelerometers: DMARD05, DMARD06, DMARD07.
To compile this driver as a module, choose M here: the
module will be called dmard06.
config DMARD09
tristate "Domintech DMARD09 3-axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Domintech DMARD09 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called dmard09.
config DMARD10
tristate "Domintech DMARD10 3-axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Domintech DMARD10 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called dmard10.
config HID_SENSOR_ACCEL_3D
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
tristate "HID Accelerometers 3D"
help
Say yes here to build support for the HID SENSOR
accelerometers 3D.
To compile this driver as a module, choose M here: the
module will be called hid-sensor-accel-3d.
config IIO_ST_ACCEL_3AXIS
tristate "STMicroelectronics accelerometers 3-Axis Driver"
depends on (I2C || SPI_MASTER) && SYSFS
depends on !SENSORS_LIS3_I2C
depends on !SENSORS_LIS3_SPI
select IIO_ST_SENSORS_CORE
select IIO_ST_ACCEL_I2C_3AXIS if (I2C)
select IIO_ST_ACCEL_SPI_3AXIS if (SPI_MASTER)
select IIO_TRIGGERED_BUFFER if (IIO_BUFFER)
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12, H3LIS331DL,
LNG2DM
This driver can also be built as a module. If so, these modules
will be created:
- st_accel (core functions for the driver [it is mandatory]);
- st_accel_i2c (necessary for the I2C devices [optional*]);
- st_accel_spi (necessary for the SPI devices [optional*]);
(*) one of these is necessary to do something.
config IIO_ST_ACCEL_I2C_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_I2C
config IIO_ST_ACCEL_SPI_3AXIS
tristate
depends on IIO_ST_ACCEL_3AXIS
depends on IIO_ST_SENSORS_SPI
config KXSD9
tristate "Kionix KXSD9 Accelerometer Driver"
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the Kionix KXSD9 accelerometer.
It can be accessed using an (optional) SPI or I2C interface.
To compile this driver as a module, choose M here: the module
will be called kxsd9.
config KXSD9_SPI
tristate "Kionix KXSD9 SPI transport"
depends on KXSD9
depends on SPI
default KXSD9
select REGMAP_SPI
help
Say yes here to enable the Kionix KXSD9 accelerometer
SPI transport channel.
config KXSD9_I2C
tristate "Kionix KXSD9 I2C transport"
depends on KXSD9
depends on I2C
default KXSD9
select REGMAP_I2C
help
Say yes here to enable the Kionix KXSD9 accelerometer
I2C transport channel.
config KXCJK1013
tristate "Kionix 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say Y here if you want to build a driver for the Kionix KXCJK-1013
triaxial acceleration sensor. This driver also supports KXCJ9-1008
and KXTJ2-1009.
To compile this driver as a module, choose M here: the module will
be called kxcjk-1013.
config MC3230
tristate "mCube MC3230 Digital Accelerometer Driver"
depends on I2C
help
Say yes here to build support for the mCube MC3230 low-g tri-axial
digital accelerometer.
To compile this driver as a module, choose M here: the
module will be called mc3230.
config MMA7455
tristate
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
config MMA7455_I2C
tristate "Freescale MMA7455L/MMA7456L Accelerometer I2C Driver"
depends on I2C
select MMA7455
select REGMAP_I2C
help
Say yes here to build support for the Freescale MMA7455L and
MMA7456L 3-axis accelerometer.
To compile this driver as a module, choose M here: the module
will be called mma7455_i2c.
config MMA7455_SPI
tristate "Freescale MMA7455L/MMA7456L Accelerometer SPI Driver"
depends on SPI_MASTER
select MMA7455
select REGMAP_SPI
help
Say yes here to build support for the Freescale MMA7455L and
MMA7456L 3-axis accelerometer.
To compile this driver as a module, choose M here: the module
will be called mma7455_spi.
config MMA7660
tristate "Freescale MMA7660FC 3-Axis Accelerometer Driver"
depends on I2C
help
Say yes here to get support for the Freescale MMA7660FC 3-Axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called mma7660.
config MMA8452
tristate "Freescale / NXP MMA8452Q and similar Accelerometers Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to build support for the following Freescale / NXP 3-axis
accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC,
FXLS8471Q.
To compile this driver as a module, choose M here: the module
will be called mma8452.
config MMA9551_CORE
tristate
config MMA9551
tristate "Freescale MMA9551L Intelligent Motion-Sensing Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9551L
Intelligent Motion-Sensing Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9551.
config MMA9553
tristate "Freescale MMA9553L Intelligent Pedometer Platform Driver"
depends on I2C
select MMA9551_CORE
help
Say yes here to build support for the Freescale MMA9553L
Intelligent Pedometer Platform Driver.
To compile this driver as a module, choose M here: the module
will be called mma9553.
config MXC4005
tristate "Memsic MXC4005XC 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select REGMAP_I2C
help
Say yes here to build support for the Memsic MXC4005XC 3-axis
accelerometer.
To compile this driver as a module, choose M. The module will be
called mxc4005.
config MXC6255
tristate "Memsic MXC6255 Orientation Sensing Accelerometer Driver"
depends on I2C
select REGMAP_I2C
help
Say yes here to build support for the Memsic MXC6255 Orientation
Sensing Accelerometer Driver.
To compile this driver as a module, choose M here: the module will be
called mxc6255.
config SCA3000
select IIO_BUFFER
select IIO_KFIFO_BUF
depends on SPI
tristate "VTI SCA3000 series accelerometers"
help
Say Y here to build support for the VTI SCA3000 series of SPI
accelerometers. These devices use a hardware ring buffer.
To compile this driver as a module, say M here: the module will be
called sca3000.
config STK8312
tristate "Sensortek STK8312 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8312 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8312.
config STK8BA50
tristate "Sensortek STK8BA50 3-Axis Accelerometer Driver"
depends on I2C
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
help
Say yes here to get support for the Sensortek STK8BA50 3-axis
accelerometer.
Choosing M will build the driver as a module. If so, the module
will be called stk8ba50.
endmenu