linux/drivers/net/ixgbe/ixgbe_phy.h
Peter P Waskiewicz Jr 537d58a00a ixgbe: Change Direct Attach Twinax cable detection for SFP+ NICs
The SFF specification for Direct Attach cable detection has now been
ratified.  Previously, DA cable detect was looking at the Twinaxial bit in
byte 9 of the SFP+ EEPROM.  The spec now defines active and passive DA
cables in byte 8 of the SFP+ EEPROM.  This patch changes the cable
detection for both 82598 and 82599 SFP+ adapters to conform to the new
spec.

Signed-off-by: Peter P Waskiewicz Jr <peter.p.waskiewicz.jr@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2009-05-19 15:36:14 -07:00

115 lines
4.7 KiB
C

/*******************************************************************************
Intel 10 Gigabit PCI Express Linux driver
Copyright(c) 1999 - 2009 Intel Corporation.
This program is free software; you can redistribute it and/or modify it
under the terms and conditions of the GNU General Public License,
version 2, as published by the Free Software Foundation.
This program is distributed in the hope it will be useful, but WITHOUT
ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
more details.
You should have received a copy of the GNU General Public License along with
this program; if not, write to the Free Software Foundation, Inc.,
51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA.
The full GNU General Public License is included in this distribution in
the file called "COPYING".
Contact Information:
e1000-devel Mailing List <e1000-devel@lists.sourceforge.net>
Intel Corporation, 5200 N.E. Elam Young Parkway, Hillsboro, OR 97124-6497
*******************************************************************************/
#ifndef _IXGBE_PHY_H_
#define _IXGBE_PHY_H_
#include "ixgbe_type.h"
#define IXGBE_I2C_EEPROM_DEV_ADDR 0xA0
/* EEPROM byte offsets */
#define IXGBE_SFF_IDENTIFIER 0x0
#define IXGBE_SFF_IDENTIFIER_SFP 0x3
#define IXGBE_SFF_VENDOR_OUI_BYTE0 0x25
#define IXGBE_SFF_VENDOR_OUI_BYTE1 0x26
#define IXGBE_SFF_VENDOR_OUI_BYTE2 0x27
#define IXGBE_SFF_1GBE_COMP_CODES 0x6
#define IXGBE_SFF_10GBE_COMP_CODES 0x3
#define IXGBE_SFF_CABLE_TECHNOLOGY 0x8
/* Bitmasks */
#define IXGBE_SFF_DA_PASSIVE_CABLE 0x4
#define IXGBE_SFF_1GBASESX_CAPABLE 0x1
#define IXGBE_SFF_1GBASELX_CAPABLE 0x2
#define IXGBE_SFF_10GBASESR_CAPABLE 0x10
#define IXGBE_SFF_10GBASELR_CAPABLE 0x20
#define IXGBE_I2C_EEPROM_READ_MASK 0x100
#define IXGBE_I2C_EEPROM_STATUS_MASK 0x3
#define IXGBE_I2C_EEPROM_STATUS_NO_OPERATION 0x0
#define IXGBE_I2C_EEPROM_STATUS_PASS 0x1
#define IXGBE_I2C_EEPROM_STATUS_FAIL 0x2
#define IXGBE_I2C_EEPROM_STATUS_IN_PROGRESS 0x3
/* Bit-shift macros */
#define IXGBE_SFF_VENDOR_OUI_BYTE0_SHIFT 24
#define IXGBE_SFF_VENDOR_OUI_BYTE1_SHIFT 16
#define IXGBE_SFF_VENDOR_OUI_BYTE2_SHIFT 8
/* Vendor OUIs: format of OUI is 0x[byte0][byte1][byte2][00] */
#define IXGBE_SFF_VENDOR_OUI_TYCO 0x00407600
#define IXGBE_SFF_VENDOR_OUI_FTL 0x00906500
#define IXGBE_SFF_VENDOR_OUI_AVAGO 0x00176A00
#define IXGBE_SFF_VENDOR_OUI_INTEL 0x001B2100
/* I2C SDA and SCL timing parameters for standard mode */
#define IXGBE_I2C_T_HD_STA 4
#define IXGBE_I2C_T_LOW 5
#define IXGBE_I2C_T_HIGH 4
#define IXGBE_I2C_T_SU_STA 5
#define IXGBE_I2C_T_HD_DATA 5
#define IXGBE_I2C_T_SU_DATA 1
#define IXGBE_I2C_T_RISE 1
#define IXGBE_I2C_T_FALL 1
#define IXGBE_I2C_T_SU_STO 4
#define IXGBE_I2C_T_BUF 5
s32 ixgbe_init_phy_ops_generic(struct ixgbe_hw *hw);
s32 ixgbe_identify_phy_generic(struct ixgbe_hw *hw);
s32 ixgbe_reset_phy_generic(struct ixgbe_hw *hw);
s32 ixgbe_read_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 *phy_data);
s32 ixgbe_write_phy_reg_generic(struct ixgbe_hw *hw, u32 reg_addr,
u32 device_type, u16 phy_data);
s32 ixgbe_setup_phy_link_generic(struct ixgbe_hw *hw);
s32 ixgbe_setup_phy_link_speed_generic(struct ixgbe_hw *hw,
ixgbe_link_speed speed,
bool autoneg,
bool autoneg_wait_to_complete);
/* PHY specific */
s32 ixgbe_check_phy_link_tnx(struct ixgbe_hw *hw,
ixgbe_link_speed *speed,
bool *link_up);
s32 ixgbe_get_phy_firmware_version_tnx(struct ixgbe_hw *hw,
u16 *firmware_version);
s32 ixgbe_reset_phy_nl(struct ixgbe_hw *hw);
s32 ixgbe_identify_sfp_module_generic(struct ixgbe_hw *hw);
s32 ixgbe_get_sfp_init_sequence_offsets(struct ixgbe_hw *hw,
u16 *list_offset,
u16 *data_offset);
s32 ixgbe_read_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 *data);
s32 ixgbe_write_i2c_byte_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 dev_addr, u8 data);
s32 ixgbe_read_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 *eeprom_data);
s32 ixgbe_write_i2c_eeprom_generic(struct ixgbe_hw *hw, u8 byte_offset,
u8 eeprom_data);
#endif /* _IXGBE_PHY_H_ */