linux/include/asm-i386/uaccess.h
Linus Torvalds 1da177e4c3 Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!
2005-04-16 15:20:36 -07:00

540 lines
17 KiB
C

#ifndef __i386_UACCESS_H
#define __i386_UACCESS_H
/*
* User space memory access functions
*/
#include <linux/config.h>
#include <linux/errno.h>
#include <linux/thread_info.h>
#include <linux/prefetch.h>
#include <linux/string.h>
#include <asm/page.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
* get_fs() == KERNEL_DS, checking is bypassed.
*
* For historical reasons, these macros are grossly misnamed.
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
#define get_ds() (KERNEL_DS)
#define get_fs() (current_thread_info()->addr_limit)
#define set_fs(x) (current_thread_info()->addr_limit = (x))
#define segment_eq(a,b) ((a).seg == (b).seg)
/*
* movsl can be slow when source and dest are not both 8-byte aligned
*/
#ifdef CONFIG_X86_INTEL_USERCOPY
extern struct movsl_mask {
int mask;
} ____cacheline_aligned_in_smp movsl_mask;
#endif
#define __addr_ok(addr) ((unsigned long __force)(addr) < (current_thread_info()->addr_limit.seg))
/*
* Test whether a block of memory is a valid user space address.
* Returns 0 if the range is valid, nonzero otherwise.
*
* This is equivalent to the following test:
* (u33)addr + (u33)size >= (u33)current->addr_limit.seg
*
* This needs 33-bit arithmetic. We have a carry...
*/
#define __range_ok(addr,size) ({ \
unsigned long flag,sum; \
__chk_user_ptr(addr); \
asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
:"=&r" (flag), "=r" (sum) \
:"1" (addr),"g" ((int)(size)),"g" (current_thread_info()->addr_limit.seg)); \
flag; })
/**
* access_ok: - Checks if a user space pointer is valid
* @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
* %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
* to write to a block, it is always safe to read from it.
* @addr: User space pointer to start of block to check
* @size: Size of block to check
*
* Context: User context only. This function may sleep.
*
* Checks if a pointer to a block of memory in user space is valid.
*
* Returns true (nonzero) if the memory block may be valid, false (zero)
* if it is definitely invalid.
*
* Note that, depending on architecture, this function probably just
* checks that the pointer is in the user space range - after calling
* this function, memory access functions may still return -EFAULT.
*/
#define access_ok(type,addr,size) (likely(__range_ok(addr,size) == 0))
/**
* verify_area: - Obsolete/deprecated and will go away soon,
* use access_ok() instead.
* @type: Type of access: %VERIFY_READ or %VERIFY_WRITE
* @addr: User space pointer to start of block to check
* @size: Size of block to check
*
* Context: User context only. This function may sleep.
*
* This function has been replaced by access_ok().
*
* Checks if a pointer to a block of memory in user space is valid.
*
* Returns zero if the memory block may be valid, -EFAULT
* if it is definitely invalid.
*
* See access_ok() for more details.
*/
static inline int __deprecated verify_area(int type, const void __user * addr, unsigned long size)
{
return access_ok(type,addr,size) ? 0 : -EFAULT;
}
/*
* The exception table consists of pairs of addresses: the first is the
* address of an instruction that is allowed to fault, and the second is
* the address at which the program should continue. No registers are
* modified, so it is entirely up to the continuation code to figure out
* what to do.
*
* All the routines below use bits of fixup code that are out of line
* with the main instruction path. This means when everything is well,
* we don't even have to jump over them. Further, they do not intrude
* on our cache or tlb entries.
*/
struct exception_table_entry
{
unsigned long insn, fixup;
};
extern int fixup_exception(struct pt_regs *regs);
/*
* These are the main single-value transfer routines. They automatically
* use the right size if we just have the right pointer type.
*
* This gets kind of ugly. We want to return _two_ values in "get_user()"
* and yet we don't want to do any pointers, because that is too much
* of a performance impact. Thus we have a few rather ugly macros here,
* and hide all the ugliness from the user.
*
* The "__xxx" versions of the user access functions are versions that
* do not verify the address space, that must have been done previously
* with a separate "access_ok()" call (this is used when we do multiple
* accesses to the same area of user memory).
*/
extern void __get_user_1(void);
extern void __get_user_2(void);
extern void __get_user_4(void);
#define __get_user_x(size,ret,x,ptr) \
__asm__ __volatile__("call __get_user_" #size \
:"=a" (ret),"=d" (x) \
:"0" (ptr))
/* Careful: we have to cast the result to the type of the pointer for sign reasons */
/**
* get_user: - Get a simple variable from user space.
* @x: Variable to store result.
* @ptr: Source address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple variable from user space to kernel
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and the result of
* dereferencing @ptr must be assignable to @x without a cast.
*
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
#define get_user(x,ptr) \
({ int __ret_gu; \
unsigned long __val_gu; \
__chk_user_ptr(ptr); \
switch(sizeof (*(ptr))) { \
case 1: __get_user_x(1,__ret_gu,__val_gu,ptr); break; \
case 2: __get_user_x(2,__ret_gu,__val_gu,ptr); break; \
case 4: __get_user_x(4,__ret_gu,__val_gu,ptr); break; \
default: __get_user_x(X,__ret_gu,__val_gu,ptr); break; \
} \
(x) = (__typeof__(*(ptr)))__val_gu; \
__ret_gu; \
})
extern void __put_user_bad(void);
/*
* Strange magic calling convention: pointer in %ecx,
* value in %eax(:%edx), return value in %eax, no clobbers.
*/
extern void __put_user_1(void);
extern void __put_user_2(void);
extern void __put_user_4(void);
extern void __put_user_8(void);
#define __put_user_1(x, ptr) __asm__ __volatile__("call __put_user_1":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
#define __put_user_2(x, ptr) __asm__ __volatile__("call __put_user_2":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
#define __put_user_4(x, ptr) __asm__ __volatile__("call __put_user_4":"=a" (__ret_pu):"0" ((typeof(*(ptr)))(x)), "c" (ptr))
#define __put_user_8(x, ptr) __asm__ __volatile__("call __put_user_8":"=a" (__ret_pu):"A" ((typeof(*(ptr)))(x)), "c" (ptr))
#define __put_user_X(x, ptr) __asm__ __volatile__("call __put_user_X":"=a" (__ret_pu):"c" (ptr))
/**
* put_user: - Write a simple value into user space.
* @x: Value to copy to user space.
* @ptr: Destination address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple value from kernel space to user
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and @x must be assignable
* to the result of dereferencing @ptr.
*
* Returns zero on success, or -EFAULT on error.
*/
#ifdef CONFIG_X86_WP_WORKS_OK
#define put_user(x,ptr) \
({ int __ret_pu; \
__chk_user_ptr(ptr); \
switch(sizeof(*(ptr))) { \
case 1: __put_user_1(x, ptr); break; \
case 2: __put_user_2(x, ptr); break; \
case 4: __put_user_4(x, ptr); break; \
case 8: __put_user_8(x, ptr); break; \
default:__put_user_X(x, ptr); break; \
} \
__ret_pu; \
})
#else
#define put_user(x,ptr) \
({ \
int __ret_pu; \
__typeof__(*(ptr)) __pus_tmp = x; \
__ret_pu=0; \
if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
sizeof(*(ptr))) != 0)) \
__ret_pu=-EFAULT; \
__ret_pu; \
})
#endif
/**
* __get_user: - Get a simple variable from user space, with less checking.
* @x: Variable to store result.
* @ptr: Source address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple variable from user space to kernel
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and the result of
* dereferencing @ptr must be assignable to @x without a cast.
*
* Caller must check the pointer with access_ok() before calling this
* function.
*
* Returns zero on success, or -EFAULT on error.
* On error, the variable @x is set to zero.
*/
#define __get_user(x,ptr) \
__get_user_nocheck((x),(ptr),sizeof(*(ptr)))
/**
* __put_user: - Write a simple value into user space, with less checking.
* @x: Value to copy to user space.
* @ptr: Destination address, in user space.
*
* Context: User context only. This function may sleep.
*
* This macro copies a single simple value from kernel space to user
* space. It supports simple types like char and int, but not larger
* data types like structures or arrays.
*
* @ptr must have pointer-to-simple-variable type, and @x must be assignable
* to the result of dereferencing @ptr.
*
* Caller must check the pointer with access_ok() before calling this
* function.
*
* Returns zero on success, or -EFAULT on error.
*/
#define __put_user(x,ptr) \
__put_user_nocheck((__typeof__(*(ptr)))(x),(ptr),sizeof(*(ptr)))
#define __put_user_nocheck(x,ptr,size) \
({ \
long __pu_err; \
__put_user_size((x),(ptr),(size),__pu_err,-EFAULT); \
__pu_err; \
})
#define __put_user_u64(x, addr, err) \
__asm__ __volatile__( \
"1: movl %%eax,0(%2)\n" \
"2: movl %%edx,4(%2)\n" \
"3:\n" \
".section .fixup,\"ax\"\n" \
"4: movl %3,%0\n" \
" jmp 3b\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 4\n" \
" .long 1b,4b\n" \
" .long 2b,4b\n" \
".previous" \
: "=r"(err) \
: "A" (x), "r" (addr), "i"(-EFAULT), "0"(err))
#ifdef CONFIG_X86_WP_WORKS_OK
#define __put_user_size(x,ptr,size,retval,errret) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
case 1: __put_user_asm(x,ptr,retval,"b","b","iq",errret);break; \
case 2: __put_user_asm(x,ptr,retval,"w","w","ir",errret);break; \
case 4: __put_user_asm(x,ptr,retval,"l","","ir",errret); break; \
case 8: __put_user_u64((__typeof__(*ptr))(x),ptr,retval); break;\
default: __put_user_bad(); \
} \
} while (0)
#else
#define __put_user_size(x,ptr,size,retval,errret) \
do { \
__typeof__(*(ptr)) __pus_tmp = x; \
retval = 0; \
\
if(unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
retval = errret; \
} while (0)
#endif
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct __user *)(x))
/*
* Tell gcc we read from memory instead of writing: this is because
* we do not write to any memory gcc knows about, so there are no
* aliasing issues.
*/
#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
__asm__ __volatile__( \
"1: mov"itype" %"rtype"1,%2\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: movl %3,%0\n" \
" jmp 2b\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 4\n" \
" .long 1b,3b\n" \
".previous" \
: "=r"(err) \
: ltype (x), "m"(__m(addr)), "i"(errret), "0"(err))
#define __get_user_nocheck(x,ptr,size) \
({ \
long __gu_err; \
unsigned long __gu_val; \
__get_user_size(__gu_val,(ptr),(size),__gu_err,-EFAULT);\
(x) = (__typeof__(*(ptr)))__gu_val; \
__gu_err; \
})
extern long __get_user_bad(void);
#define __get_user_size(x,ptr,size,retval,errret) \
do { \
retval = 0; \
__chk_user_ptr(ptr); \
switch (size) { \
case 1: __get_user_asm(x,ptr,retval,"b","b","=q",errret);break; \
case 2: __get_user_asm(x,ptr,retval,"w","w","=r",errret);break; \
case 4: __get_user_asm(x,ptr,retval,"l","","=r",errret);break; \
default: (x) = __get_user_bad(); \
} \
} while (0)
#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
__asm__ __volatile__( \
"1: mov"itype" %2,%"rtype"1\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3: movl %3,%0\n" \
" xor"itype" %"rtype"1,%"rtype"1\n" \
" jmp 2b\n" \
".previous\n" \
".section __ex_table,\"a\"\n" \
" .align 4\n" \
" .long 1b,3b\n" \
".previous" \
: "=r"(err), ltype (x) \
: "m"(__m(addr)), "i"(errret), "0"(err))
unsigned long __must_check __copy_to_user_ll(void __user *to,
const void *from, unsigned long n);
unsigned long __must_check __copy_from_user_ll(void *to,
const void __user *from, unsigned long n);
/*
* Here we special-case 1, 2 and 4-byte copy_*_user invocations. On a fault
* we return the initial request size (1, 2 or 4), as copy_*_user should do.
* If a store crosses a page boundary and gets a fault, the x86 will not write
* anything, so this is accurate.
*/
/**
* __copy_to_user: - Copy a block of data into user space, with less checking.
* @to: Destination address, in user space.
* @from: Source address, in kernel space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from kernel space to user space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*/
static inline unsigned long __must_check
__copy_to_user_inatomic(void __user *to, const void *from, unsigned long n)
{
if (__builtin_constant_p(n)) {
unsigned long ret;
switch (n) {
case 1:
__put_user_size(*(u8 *)from, (u8 __user *)to, 1, ret, 1);
return ret;
case 2:
__put_user_size(*(u16 *)from, (u16 __user *)to, 2, ret, 2);
return ret;
case 4:
__put_user_size(*(u32 *)from, (u32 __user *)to, 4, ret, 4);
return ret;
}
}
return __copy_to_user_ll(to, from, n);
}
static inline unsigned long __must_check
__copy_to_user(void __user *to, const void *from, unsigned long n)
{
might_sleep();
return __copy_to_user_inatomic(to, from, n);
}
/**
* __copy_from_user: - Copy a block of data from user space, with less checking.
* @to: Destination address, in kernel space.
* @from: Source address, in user space.
* @n: Number of bytes to copy.
*
* Context: User context only. This function may sleep.
*
* Copy data from user space to kernel space. Caller must check
* the specified block with access_ok() before calling this function.
*
* Returns number of bytes that could not be copied.
* On success, this will be zero.
*
* If some data could not be copied, this function will pad the copied
* data to the requested size using zero bytes.
*/
static inline unsigned long
__copy_from_user_inatomic(void *to, const void __user *from, unsigned long n)
{
if (__builtin_constant_p(n)) {
unsigned long ret;
switch (n) {
case 1:
__get_user_size(*(u8 *)to, from, 1, ret, 1);
return ret;
case 2:
__get_user_size(*(u16 *)to, from, 2, ret, 2);
return ret;
case 4:
__get_user_size(*(u32 *)to, from, 4, ret, 4);
return ret;
}
}
return __copy_from_user_ll(to, from, n);
}
static inline unsigned long
__copy_from_user(void *to, const void __user *from, unsigned long n)
{
might_sleep();
return __copy_from_user_inatomic(to, from, n);
}
unsigned long __must_check copy_to_user(void __user *to,
const void *from, unsigned long n);
unsigned long __must_check copy_from_user(void *to,
const void __user *from, unsigned long n);
long __must_check strncpy_from_user(char *dst, const char __user *src,
long count);
long __must_check __strncpy_from_user(char *dst,
const char __user *src, long count);
/**
* strlen_user: - Get the size of a string in user space.
* @str: The string to measure.
*
* Context: User context only. This function may sleep.
*
* Get the size of a NUL-terminated string in user space.
*
* Returns the size of the string INCLUDING the terminating NUL.
* On exception, returns 0.
*
* If there is a limit on the length of a valid string, you may wish to
* consider using strnlen_user() instead.
*/
#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
long strnlen_user(const char __user *str, long n);
unsigned long __must_check clear_user(void __user *mem, unsigned long len);
unsigned long __must_check __clear_user(void __user *mem, unsigned long len);
#endif /* __i386_UACCESS_H */