linux/arch/arm/plat-spear/padmux.c
viresh kumar 70f4c0bf9e ARM: 6020/1: ST SPEAr: Adding gpio pad multiplexing support
GPIO Pads in spear platform are are multiplexed in various machines.
This patch adds support for this pad multiplexing.

Reviewed-by: Linus Walleij <linux.walleij@stericsson.com>
Signed-off-by: Viresh Kumar <viresh.kumar@st.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2010-04-14 11:34:38 +01:00

165 lines
3.8 KiB
C

/*
* arch/arm/plat-spear/include/plat/padmux.c
*
* SPEAr platform specific gpio pads muxing source file
*
* Copyright (C) 2009 ST Microelectronics
* Viresh Kumar<viresh.kumar@st.com>
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/err.h>
#include <linux/io.h>
#include <linux/slab.h>
#include <plat/padmux.h>
/*
* struct pmx: pmx definition structure
*
* base: base address of configuration registers
* mode_reg: mode configurations
* mux_reg: muxing configurations
* active_mode: pointer to current active mode
*/
struct pmx {
u32 base;
struct pmx_reg mode_reg;
struct pmx_reg mux_reg;
struct pmx_mode *active_mode;
};
static struct pmx *pmx;
/**
* pmx_mode_set - Enables an multiplexing mode
* @mode - pointer to pmx mode
*
* It will set mode of operation in hardware.
* Returns -ve on Err otherwise 0
*/
static int pmx_mode_set(struct pmx_mode *mode)
{
u32 val;
if (!mode->name)
return -EFAULT;
pmx->active_mode = mode;
val = readl(pmx->base + pmx->mode_reg.offset);
val &= ~pmx->mode_reg.mask;
val |= mode->mask & pmx->mode_reg.mask;
writel(val, pmx->base + pmx->mode_reg.offset);
return 0;
}
/**
* pmx_devs_enable - Enables list of devices
* @devs - pointer to pmx device array
* @count - number of devices to enable
*
* It will enable pads for all required peripherals once and only once.
* If peripheral is not supported by current mode then request is rejected.
* Conflicts between peripherals are not handled and peripherals will be
* enabled in the order they are present in pmx_dev array.
* In case of conflicts last peripheral enalbed will be present.
* Returns -ve on Err otherwise 0
*/
static int pmx_devs_enable(struct pmx_dev **devs, u8 count)
{
u32 val, i, mask;
if (!count)
return -EINVAL;
val = readl(pmx->base + pmx->mux_reg.offset);
for (i = 0; i < count; i++) {
u8 j = 0;
if (!devs[i]->name || !devs[i]->modes) {
printk(KERN_ERR "padmux: dev name or modes is null\n");
continue;
}
/* check if peripheral exists in active mode */
if (pmx->active_mode) {
bool found = false;
for (j = 0; j < devs[i]->mode_count; j++) {
if (devs[i]->modes[j].ids &
pmx->active_mode->id) {
found = true;
break;
}
}
if (found == false) {
printk(KERN_ERR "%s device not available in %s"\
"mode\n", devs[i]->name,
pmx->active_mode->name);
continue;
}
}
/* enable peripheral */
mask = devs[i]->modes[j].mask & pmx->mux_reg.mask;
if (devs[i]->enb_on_reset)
val &= ~mask;
else
val |= mask;
devs[i]->is_active = true;
}
writel(val, pmx->base + pmx->mux_reg.offset);
kfree(pmx);
/* this will ensure that multiplexing can't be changed now */
pmx = (struct pmx *)-1;
return 0;
}
/**
* pmx_register - registers a platform requesting pad mux feature
* @driver - pointer to driver structure containing driver specific parameters
*
* Also this must be called only once. This will allocate memory for pmx
* structure, will call pmx_mode_set, will call pmx_devs_enable.
* Returns -ve on Err otherwise 0
*/
int pmx_register(struct pmx_driver *driver)
{
int ret = 0;
if (pmx)
return -EPERM;
if (!driver->base || !driver->devs)
return -EFAULT;
pmx = kzalloc(sizeof(*pmx), GFP_KERNEL);
if (!pmx)
return -ENOMEM;
pmx->base = (u32)driver->base;
pmx->mode_reg.offset = driver->mode_reg.offset;
pmx->mode_reg.mask = driver->mode_reg.mask;
pmx->mux_reg.offset = driver->mux_reg.offset;
pmx->mux_reg.mask = driver->mux_reg.mask;
/* choose mode to enable */
if (driver->mode) {
ret = pmx_mode_set(driver->mode);
if (ret)
goto pmx_fail;
}
ret = pmx_devs_enable(driver->devs, driver->devs_count);
if (ret)
goto pmx_fail;
return 0;
pmx_fail:
return ret;
}