mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
a5d361fc24
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Cc: Roman Zippel <zippel@linux-m68k.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
965 lines
26 KiB
C
965 lines
26 KiB
C
/* sun3lance.c: Ethernet driver for SUN3 Lance chip */
|
|
/*
|
|
|
|
Sun3 Lance ethernet driver, by Sam Creasey (sammy@users.qual.net).
|
|
This driver is a part of the linux kernel, and is thus distributed
|
|
under the GNU General Public License.
|
|
|
|
The values used in LANCE_OBIO and LANCE_IRQ seem to be empirically
|
|
true for the correct IRQ and address of the lance registers. They
|
|
have not been widely tested, however. What we probably need is a
|
|
"proper" way to search for a device in the sun3's prom, but, alas,
|
|
linux has no such thing.
|
|
|
|
This driver is largely based on atarilance.c, by Roman Hodek. Other
|
|
sources of inspiration were the NetBSD sun3 am7990 driver, and the
|
|
linux sparc lance driver (sunlance.c).
|
|
|
|
There are more assumptions made throughout this driver, it almost
|
|
certainly still needs work, but it does work at least for RARP/BOOTP and
|
|
mounting the root NFS filesystem.
|
|
|
|
*/
|
|
|
|
static char *version = "sun3lance.c: v1.2 1/12/2001 Sam Creasey (sammy@sammy.net)\n";
|
|
|
|
#include <linux/module.h>
|
|
#include <linux/stddef.h>
|
|
#include <linux/kernel.h>
|
|
#include <linux/string.h>
|
|
#include <linux/errno.h>
|
|
#include <linux/slab.h>
|
|
#include <linux/interrupt.h>
|
|
#include <linux/init.h>
|
|
#include <linux/ioport.h>
|
|
#include <linux/delay.h>
|
|
#include <linux/netdevice.h>
|
|
#include <linux/etherdevice.h>
|
|
#include <linux/skbuff.h>
|
|
#include <linux/bitops.h>
|
|
|
|
#include <asm/setup.h>
|
|
#include <asm/irq.h>
|
|
#include <asm/io.h>
|
|
#include <asm/pgtable.h>
|
|
#include <asm/dvma.h>
|
|
#include <asm/idprom.h>
|
|
#include <asm/machines.h>
|
|
|
|
#ifdef CONFIG_SUN3
|
|
#include <asm/sun3mmu.h>
|
|
#else
|
|
#include <asm/sun3xprom.h>
|
|
#endif
|
|
|
|
/* sun3/60 addr/irq for the lance chip. If your sun is different,
|
|
change this. */
|
|
#define LANCE_OBIO 0x120000
|
|
#define LANCE_IRQ IRQ3
|
|
|
|
/* Debug level:
|
|
* 0 = silent, print only serious errors
|
|
* 1 = normal, print error messages
|
|
* 2 = debug, print debug infos
|
|
* 3 = debug, print even more debug infos (packet data)
|
|
*/
|
|
|
|
#define LANCE_DEBUG 0
|
|
|
|
#ifdef LANCE_DEBUG
|
|
static int lance_debug = LANCE_DEBUG;
|
|
#else
|
|
static int lance_debug = 1;
|
|
#endif
|
|
MODULE_PARM(lance_debug, "i");
|
|
MODULE_PARM_DESC(lance_debug, "SUN3 Lance debug level (0-3)");
|
|
MODULE_LICENSE("GPL");
|
|
|
|
#define DPRINTK(n,a) \
|
|
do { \
|
|
if (lance_debug >= n) \
|
|
printk a; \
|
|
} while( 0 )
|
|
|
|
|
|
/* we're only using 32k of memory, so we use 4 TX
|
|
buffers and 16 RX buffers. These values are expressed as log2. */
|
|
|
|
#define TX_LOG_RING_SIZE 3
|
|
#define RX_LOG_RING_SIZE 5
|
|
|
|
/* These are the derived values */
|
|
|
|
#define TX_RING_SIZE (1 << TX_LOG_RING_SIZE)
|
|
#define TX_RING_LEN_BITS (TX_LOG_RING_SIZE << 5)
|
|
#define TX_RING_MOD_MASK (TX_RING_SIZE - 1)
|
|
|
|
#define RX_RING_SIZE (1 << RX_LOG_RING_SIZE)
|
|
#define RX_RING_LEN_BITS (RX_LOG_RING_SIZE << 5)
|
|
#define RX_RING_MOD_MASK (RX_RING_SIZE - 1)
|
|
|
|
/* Definitions for packet buffer access: */
|
|
#define PKT_BUF_SZ 1544
|
|
|
|
/* Get the address of a packet buffer corresponding to a given buffer head */
|
|
#define PKTBUF_ADDR(head) (void *)((unsigned long)(MEM) | (head)->base)
|
|
|
|
|
|
/* The LANCE Rx and Tx ring descriptors. */
|
|
struct lance_rx_head {
|
|
unsigned short base; /* Low word of base addr */
|
|
volatile unsigned char flag;
|
|
unsigned char base_hi; /* High word of base addr (unused) */
|
|
short buf_length; /* This length is 2s complement! */
|
|
volatile short msg_length; /* This length is "normal". */
|
|
};
|
|
|
|
struct lance_tx_head {
|
|
unsigned short base; /* Low word of base addr */
|
|
volatile unsigned char flag;
|
|
unsigned char base_hi; /* High word of base addr (unused) */
|
|
short length; /* Length is 2s complement! */
|
|
volatile short misc;
|
|
};
|
|
|
|
/* The LANCE initialization block, described in databook. */
|
|
struct lance_init_block {
|
|
unsigned short mode; /* Pre-set mode */
|
|
unsigned char hwaddr[6]; /* Physical ethernet address */
|
|
unsigned int filter[2]; /* Multicast filter (unused). */
|
|
/* Receive and transmit ring base, along with length bits. */
|
|
unsigned short rdra;
|
|
unsigned short rlen;
|
|
unsigned short tdra;
|
|
unsigned short tlen;
|
|
unsigned short pad[4]; /* is thie needed? */
|
|
};
|
|
|
|
/* The whole layout of the Lance shared memory */
|
|
struct lance_memory {
|
|
struct lance_init_block init;
|
|
struct lance_tx_head tx_head[TX_RING_SIZE];
|
|
struct lance_rx_head rx_head[RX_RING_SIZE];
|
|
char rx_data[RX_RING_SIZE][PKT_BUF_SZ];
|
|
char tx_data[TX_RING_SIZE][PKT_BUF_SZ];
|
|
};
|
|
|
|
/* The driver's private device structure */
|
|
|
|
struct lance_private {
|
|
volatile unsigned short *iobase;
|
|
struct lance_memory *mem;
|
|
int new_rx, new_tx; /* The next free ring entry */
|
|
int old_tx, old_rx; /* ring entry to be processed */
|
|
struct net_device_stats stats;
|
|
/* These two must be longs for set_bit() */
|
|
long tx_full;
|
|
long lock;
|
|
};
|
|
|
|
/* I/O register access macros */
|
|
|
|
#define MEM lp->mem
|
|
#define DREG lp->iobase[0]
|
|
#define AREG lp->iobase[1]
|
|
#define REGA(a) (*( AREG = (a), &DREG ))
|
|
|
|
/* Definitions for the Lance */
|
|
|
|
/* tx_head flags */
|
|
#define TMD1_ENP 0x01 /* end of packet */
|
|
#define TMD1_STP 0x02 /* start of packet */
|
|
#define TMD1_DEF 0x04 /* deferred */
|
|
#define TMD1_ONE 0x08 /* one retry needed */
|
|
#define TMD1_MORE 0x10 /* more than one retry needed */
|
|
#define TMD1_ERR 0x40 /* error summary */
|
|
#define TMD1_OWN 0x80 /* ownership (set: chip owns) */
|
|
|
|
#define TMD1_OWN_CHIP TMD1_OWN
|
|
#define TMD1_OWN_HOST 0
|
|
|
|
/* tx_head misc field */
|
|
#define TMD3_TDR 0x03FF /* Time Domain Reflectometry counter */
|
|
#define TMD3_RTRY 0x0400 /* failed after 16 retries */
|
|
#define TMD3_LCAR 0x0800 /* carrier lost */
|
|
#define TMD3_LCOL 0x1000 /* late collision */
|
|
#define TMD3_UFLO 0x4000 /* underflow (late memory) */
|
|
#define TMD3_BUFF 0x8000 /* buffering error (no ENP) */
|
|
|
|
/* rx_head flags */
|
|
#define RMD1_ENP 0x01 /* end of packet */
|
|
#define RMD1_STP 0x02 /* start of packet */
|
|
#define RMD1_BUFF 0x04 /* buffer error */
|
|
#define RMD1_CRC 0x08 /* CRC error */
|
|
#define RMD1_OFLO 0x10 /* overflow */
|
|
#define RMD1_FRAM 0x20 /* framing error */
|
|
#define RMD1_ERR 0x40 /* error summary */
|
|
#define RMD1_OWN 0x80 /* ownership (set: ship owns) */
|
|
|
|
#define RMD1_OWN_CHIP RMD1_OWN
|
|
#define RMD1_OWN_HOST 0
|
|
|
|
/* register names */
|
|
#define CSR0 0 /* mode/status */
|
|
#define CSR1 1 /* init block addr (low) */
|
|
#define CSR2 2 /* init block addr (high) */
|
|
#define CSR3 3 /* misc */
|
|
#define CSR8 8 /* address filter */
|
|
#define CSR15 15 /* promiscuous mode */
|
|
|
|
/* CSR0 */
|
|
/* (R=readable, W=writeable, S=set on write, C=clear on write) */
|
|
#define CSR0_INIT 0x0001 /* initialize (RS) */
|
|
#define CSR0_STRT 0x0002 /* start (RS) */
|
|
#define CSR0_STOP 0x0004 /* stop (RS) */
|
|
#define CSR0_TDMD 0x0008 /* transmit demand (RS) */
|
|
#define CSR0_TXON 0x0010 /* transmitter on (R) */
|
|
#define CSR0_RXON 0x0020 /* receiver on (R) */
|
|
#define CSR0_INEA 0x0040 /* interrupt enable (RW) */
|
|
#define CSR0_INTR 0x0080 /* interrupt active (R) */
|
|
#define CSR0_IDON 0x0100 /* initialization done (RC) */
|
|
#define CSR0_TINT 0x0200 /* transmitter interrupt (RC) */
|
|
#define CSR0_RINT 0x0400 /* receiver interrupt (RC) */
|
|
#define CSR0_MERR 0x0800 /* memory error (RC) */
|
|
#define CSR0_MISS 0x1000 /* missed frame (RC) */
|
|
#define CSR0_CERR 0x2000 /* carrier error (no heartbeat :-) (RC) */
|
|
#define CSR0_BABL 0x4000 /* babble: tx-ed too many bits (RC) */
|
|
#define CSR0_ERR 0x8000 /* error (RC) */
|
|
|
|
/* CSR3 */
|
|
#define CSR3_BCON 0x0001 /* byte control */
|
|
#define CSR3_ACON 0x0002 /* ALE control */
|
|
#define CSR3_BSWP 0x0004 /* byte swap (1=big endian) */
|
|
|
|
/***************************** Prototypes *****************************/
|
|
|
|
static int lance_probe( struct net_device *dev);
|
|
static int lance_open( struct net_device *dev );
|
|
static void lance_init_ring( struct net_device *dev );
|
|
static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev );
|
|
static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp );
|
|
static int lance_rx( struct net_device *dev );
|
|
static int lance_close( struct net_device *dev );
|
|
static struct net_device_stats *lance_get_stats( struct net_device *dev );
|
|
static void set_multicast_list( struct net_device *dev );
|
|
|
|
/************************* End of Prototypes **************************/
|
|
|
|
struct net_device * __init sun3lance_probe(int unit)
|
|
{
|
|
struct net_device *dev;
|
|
static int found;
|
|
int err = -ENODEV;
|
|
|
|
/* check that this machine has an onboard lance */
|
|
switch(idprom->id_machtype) {
|
|
case SM_SUN3|SM_3_50:
|
|
case SM_SUN3|SM_3_60:
|
|
case SM_SUN3X|SM_3_80:
|
|
/* these machines have lance */
|
|
break;
|
|
|
|
default:
|
|
return ERR_PTR(-ENODEV);
|
|
}
|
|
|
|
if (found)
|
|
return ERR_PTR(-ENODEV);
|
|
|
|
dev = alloc_etherdev(sizeof(struct lance_private));
|
|
if (!dev)
|
|
return ERR_PTR(-ENOMEM);
|
|
if (unit >= 0) {
|
|
sprintf(dev->name, "eth%d", unit);
|
|
netdev_boot_setup_check(dev);
|
|
}
|
|
SET_MODULE_OWNER(dev);
|
|
|
|
if (!lance_probe(dev))
|
|
goto out;
|
|
|
|
err = register_netdev(dev);
|
|
if (err)
|
|
goto out1;
|
|
found = 1;
|
|
return dev;
|
|
|
|
out1:
|
|
#ifdef CONFIG_SUN3
|
|
iounmap((void *)dev->base_addr);
|
|
#endif
|
|
out:
|
|
free_netdev(dev);
|
|
return ERR_PTR(err);
|
|
}
|
|
|
|
static int __init lance_probe( struct net_device *dev)
|
|
{
|
|
unsigned long ioaddr;
|
|
|
|
struct lance_private *lp;
|
|
int i;
|
|
static int did_version;
|
|
volatile unsigned short *ioaddr_probe;
|
|
unsigned short tmp1, tmp2;
|
|
|
|
#ifdef CONFIG_SUN3
|
|
ioaddr = (unsigned long)ioremap(LANCE_OBIO, PAGE_SIZE);
|
|
if (!ioaddr)
|
|
return 0;
|
|
#else
|
|
ioaddr = SUN3X_LANCE;
|
|
#endif
|
|
|
|
/* test to see if there's really a lance here */
|
|
/* (CSRO_INIT shouldn't be readable) */
|
|
|
|
ioaddr_probe = (volatile unsigned short *)ioaddr;
|
|
tmp1 = ioaddr_probe[0];
|
|
tmp2 = ioaddr_probe[1];
|
|
|
|
ioaddr_probe[1] = CSR0;
|
|
ioaddr_probe[0] = CSR0_INIT | CSR0_STOP;
|
|
|
|
if(ioaddr_probe[0] != CSR0_STOP) {
|
|
ioaddr_probe[0] = tmp1;
|
|
ioaddr_probe[1] = tmp2;
|
|
|
|
#ifdef CONFIG_SUN3
|
|
iounmap((void *)ioaddr);
|
|
#endif
|
|
return 0;
|
|
}
|
|
|
|
lp = netdev_priv(dev);
|
|
|
|
/* XXX - leak? */
|
|
MEM = dvma_malloc_align(sizeof(struct lance_memory), 0x10000);
|
|
|
|
lp->iobase = (volatile unsigned short *)ioaddr;
|
|
dev->base_addr = (unsigned long)ioaddr; /* informational only */
|
|
|
|
REGA(CSR0) = CSR0_STOP;
|
|
|
|
request_irq(LANCE_IRQ, lance_interrupt, SA_INTERRUPT, "SUN3 Lance", dev);
|
|
dev->irq = (unsigned short)LANCE_IRQ;
|
|
|
|
|
|
printk("%s: SUN3 Lance at io %#lx, mem %#lx, irq %d, hwaddr ",
|
|
dev->name,
|
|
(unsigned long)ioaddr,
|
|
(unsigned long)MEM,
|
|
dev->irq);
|
|
|
|
/* copy in the ethernet address from the prom */
|
|
for(i = 0; i < 6 ; i++)
|
|
dev->dev_addr[i] = idprom->id_ethaddr[i];
|
|
|
|
/* tell the card it's ether address, bytes swapped */
|
|
MEM->init.hwaddr[0] = dev->dev_addr[1];
|
|
MEM->init.hwaddr[1] = dev->dev_addr[0];
|
|
MEM->init.hwaddr[2] = dev->dev_addr[3];
|
|
MEM->init.hwaddr[3] = dev->dev_addr[2];
|
|
MEM->init.hwaddr[4] = dev->dev_addr[5];
|
|
MEM->init.hwaddr[5] = dev->dev_addr[4];
|
|
|
|
for( i = 0; i < 6; ++i )
|
|
printk( "%02x%s", dev->dev_addr[i], (i < 5) ? ":" : "\n" );
|
|
|
|
MEM->init.mode = 0x0000;
|
|
MEM->init.filter[0] = 0x00000000;
|
|
MEM->init.filter[1] = 0x00000000;
|
|
MEM->init.rdra = dvma_vtob(MEM->rx_head);
|
|
MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
|
|
(dvma_vtob(MEM->rx_head) >> 16);
|
|
MEM->init.tdra = dvma_vtob(MEM->tx_head);
|
|
MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
|
|
(dvma_vtob(MEM->tx_head) >> 16);
|
|
|
|
DPRINTK(2, ("initaddr: %08lx rx_ring: %08lx tx_ring: %08lx\n",
|
|
dvma_vtob(&(MEM->init)), dvma_vtob(MEM->rx_head),
|
|
(dvma_vtob(MEM->tx_head))));
|
|
|
|
if (did_version++ == 0)
|
|
printk( version );
|
|
|
|
/* The LANCE-specific entries in the device structure. */
|
|
dev->open = &lance_open;
|
|
dev->hard_start_xmit = &lance_start_xmit;
|
|
dev->stop = &lance_close;
|
|
dev->get_stats = &lance_get_stats;
|
|
dev->set_multicast_list = &set_multicast_list;
|
|
dev->set_mac_address = NULL;
|
|
// KLUDGE -- REMOVE ME
|
|
set_bit(__LINK_STATE_PRESENT, &dev->state);
|
|
|
|
|
|
memset( &lp->stats, 0, sizeof(lp->stats) );
|
|
|
|
return 1;
|
|
}
|
|
|
|
static int lance_open( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
DPRINTK( 2, ( "%s: lance_open()\n", dev->name ));
|
|
|
|
REGA(CSR0) = CSR0_STOP;
|
|
|
|
lance_init_ring(dev);
|
|
|
|
/* From now on, AREG is kept to point to CSR0 */
|
|
REGA(CSR0) = CSR0_INIT;
|
|
|
|
i = 1000000;
|
|
while (--i > 0)
|
|
if (DREG & CSR0_IDON)
|
|
break;
|
|
if (i < 0 || (DREG & CSR0_ERR)) {
|
|
DPRINTK( 2, ( "lance_open(): opening %s failed, i=%d, csr0=%04x\n",
|
|
dev->name, i, DREG ));
|
|
DREG = CSR0_STOP;
|
|
return( -EIO );
|
|
}
|
|
|
|
DREG = CSR0_IDON | CSR0_STRT | CSR0_INEA;
|
|
|
|
netif_start_queue(dev);
|
|
|
|
DPRINTK( 2, ( "%s: LANCE is open, csr0 %04x\n", dev->name, DREG ));
|
|
|
|
return( 0 );
|
|
}
|
|
|
|
|
|
/* Initialize the LANCE Rx and Tx rings. */
|
|
|
|
static void lance_init_ring( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
int i;
|
|
|
|
lp->lock = 0;
|
|
lp->tx_full = 0;
|
|
lp->new_rx = lp->new_tx = 0;
|
|
lp->old_rx = lp->old_tx = 0;
|
|
|
|
for( i = 0; i < TX_RING_SIZE; i++ ) {
|
|
MEM->tx_head[i].base = dvma_vtob(MEM->tx_data[i]);
|
|
MEM->tx_head[i].flag = 0;
|
|
MEM->tx_head[i].base_hi =
|
|
(dvma_vtob(MEM->tx_data[i])) >>16;
|
|
MEM->tx_head[i].length = 0;
|
|
MEM->tx_head[i].misc = 0;
|
|
}
|
|
|
|
for( i = 0; i < RX_RING_SIZE; i++ ) {
|
|
MEM->rx_head[i].base = dvma_vtob(MEM->rx_data[i]);
|
|
MEM->rx_head[i].flag = RMD1_OWN_CHIP;
|
|
MEM->rx_head[i].base_hi =
|
|
(dvma_vtob(MEM->rx_data[i])) >> 16;
|
|
MEM->rx_head[i].buf_length = -PKT_BUF_SZ | 0xf000;
|
|
MEM->rx_head[i].msg_length = 0;
|
|
}
|
|
|
|
/* tell the card it's ether address, bytes swapped */
|
|
MEM->init.hwaddr[0] = dev->dev_addr[1];
|
|
MEM->init.hwaddr[1] = dev->dev_addr[0];
|
|
MEM->init.hwaddr[2] = dev->dev_addr[3];
|
|
MEM->init.hwaddr[3] = dev->dev_addr[2];
|
|
MEM->init.hwaddr[4] = dev->dev_addr[5];
|
|
MEM->init.hwaddr[5] = dev->dev_addr[4];
|
|
|
|
MEM->init.mode = 0x0000;
|
|
MEM->init.filter[0] = 0x00000000;
|
|
MEM->init.filter[1] = 0x00000000;
|
|
MEM->init.rdra = dvma_vtob(MEM->rx_head);
|
|
MEM->init.rlen = (RX_LOG_RING_SIZE << 13) |
|
|
(dvma_vtob(MEM->rx_head) >> 16);
|
|
MEM->init.tdra = dvma_vtob(MEM->tx_head);
|
|
MEM->init.tlen = (TX_LOG_RING_SIZE << 13) |
|
|
(dvma_vtob(MEM->tx_head) >> 16);
|
|
|
|
|
|
/* tell the lance the address of its init block */
|
|
REGA(CSR1) = dvma_vtob(&(MEM->init));
|
|
REGA(CSR2) = dvma_vtob(&(MEM->init)) >> 16;
|
|
|
|
#ifdef CONFIG_SUN3X
|
|
REGA(CSR3) = CSR3_BSWP | CSR3_ACON | CSR3_BCON;
|
|
#else
|
|
REGA(CSR3) = CSR3_BSWP;
|
|
#endif
|
|
|
|
}
|
|
|
|
|
|
static int lance_start_xmit( struct sk_buff *skb, struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
int entry, len;
|
|
struct lance_tx_head *head;
|
|
unsigned long flags;
|
|
|
|
DPRINTK( 1, ( "%s: transmit start.\n",
|
|
dev->name));
|
|
|
|
/* Transmitter timeout, serious problems. */
|
|
if (netif_queue_stopped(dev)) {
|
|
int tickssofar = jiffies - dev->trans_start;
|
|
if (tickssofar < 20)
|
|
return( 1 );
|
|
|
|
DPRINTK( 1, ( "%s: transmit timed out, status %04x, resetting.\n",
|
|
dev->name, DREG ));
|
|
DREG = CSR0_STOP;
|
|
/*
|
|
* Always set BSWP after a STOP as STOP puts it back into
|
|
* little endian mode.
|
|
*/
|
|
REGA(CSR3) = CSR3_BSWP;
|
|
lp->stats.tx_errors++;
|
|
|
|
if(lance_debug >= 2) {
|
|
int i;
|
|
printk("Ring data: old_tx %d new_tx %d%s new_rx %d\n",
|
|
lp->old_tx, lp->new_tx,
|
|
lp->tx_full ? " (full)" : "",
|
|
lp->new_rx );
|
|
for( i = 0 ; i < RX_RING_SIZE; i++ )
|
|
printk( "rx #%d: base=%04x blen=%04x mlen=%04x\n",
|
|
i, MEM->rx_head[i].base,
|
|
-MEM->rx_head[i].buf_length,
|
|
MEM->rx_head[i].msg_length);
|
|
for( i = 0 ; i < TX_RING_SIZE; i++ )
|
|
printk("tx #%d: base=%04x len=%04x misc=%04x\n",
|
|
i, MEM->tx_head[i].base,
|
|
-MEM->tx_head[i].length,
|
|
MEM->tx_head[i].misc );
|
|
}
|
|
|
|
lance_init_ring(dev);
|
|
REGA( CSR0 ) = CSR0_INEA | CSR0_INIT | CSR0_STRT;
|
|
|
|
netif_start_queue(dev);
|
|
dev->trans_start = jiffies;
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
/* Block a timer-based transmit from overlapping. This could better be
|
|
done with atomic_swap(1, dev->tbusy), but set_bit() works as well. */
|
|
|
|
/* Block a timer-based transmit from overlapping with us by
|
|
stopping the queue for a bit... */
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
if (test_and_set_bit( 0, (void*)&lp->lock ) != 0) {
|
|
printk( "%s: tx queue lock!.\n", dev->name);
|
|
/* don't clear dev->tbusy flag. */
|
|
return 1;
|
|
}
|
|
|
|
AREG = CSR0;
|
|
DPRINTK( 2, ( "%s: lance_start_xmit() called, csr0 %4.4x.\n",
|
|
dev->name, DREG ));
|
|
|
|
#ifdef CONFIG_SUN3X
|
|
/* this weirdness doesn't appear on sun3... */
|
|
if(!(DREG & CSR0_INIT)) {
|
|
DPRINTK( 1, ("INIT not set, reinitializing...\n"));
|
|
REGA( CSR0 ) = CSR0_STOP;
|
|
lance_init_ring(dev);
|
|
REGA( CSR0 ) = CSR0_INIT | CSR0_STRT;
|
|
}
|
|
#endif
|
|
|
|
/* Fill in a Tx ring entry */
|
|
#if 0
|
|
if (lance_debug >= 2) {
|
|
u_char *p;
|
|
int i;
|
|
printk( "%s: TX pkt %d type 0x%04x from ", dev->name,
|
|
lp->new_tx, ((u_short *)skb->data)[6]);
|
|
for( p = &((u_char *)skb->data)[6], i = 0; i < 6; i++ )
|
|
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
|
printk(" to ");
|
|
for( p = (u_char *)skb->data, i = 0; i < 6; i++ )
|
|
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
|
printk(" data at 0x%08x len %d\n", (int)skb->data,
|
|
(int)skb->len );
|
|
}
|
|
#endif
|
|
/* We're not prepared for the int until the last flags are set/reset.
|
|
* And the int may happen already after setting the OWN_CHIP... */
|
|
local_irq_save(flags);
|
|
|
|
/* Mask to ring buffer boundary. */
|
|
entry = lp->new_tx;
|
|
head = &(MEM->tx_head[entry]);
|
|
|
|
/* Caution: the write order is important here, set the "ownership" bits
|
|
* last.
|
|
*/
|
|
|
|
/* the sun3's lance needs it's buffer padded to the minimum
|
|
size */
|
|
len = (ETH_ZLEN < skb->len) ? skb->len : ETH_ZLEN;
|
|
|
|
// head->length = -len;
|
|
head->length = (-len) | 0xf000;
|
|
head->misc = 0;
|
|
|
|
memcpy( PKTBUF_ADDR(head), (void *)skb->data, skb->len );
|
|
if (len != skb->len)
|
|
memset(PKTBUF_ADDR(head) + skb->len, 0, len-skb->len);
|
|
|
|
head->flag = TMD1_OWN_CHIP | TMD1_ENP | TMD1_STP;
|
|
lp->new_tx = (lp->new_tx + 1) & TX_RING_MOD_MASK;
|
|
lp->stats.tx_bytes += skb->len;
|
|
|
|
/* Trigger an immediate send poll. */
|
|
REGA(CSR0) = CSR0_INEA | CSR0_TDMD | CSR0_STRT;
|
|
AREG = CSR0;
|
|
DPRINTK( 2, ( "%s: lance_start_xmit() exiting, csr0 %4.4x.\n",
|
|
dev->name, DREG ));
|
|
dev->trans_start = jiffies;
|
|
dev_kfree_skb( skb );
|
|
|
|
lp->lock = 0;
|
|
if ((MEM->tx_head[(entry+1) & TX_RING_MOD_MASK].flag & TMD1_OWN) ==
|
|
TMD1_OWN_HOST)
|
|
netif_start_queue(dev);
|
|
|
|
local_irq_restore(flags);
|
|
|
|
return 0;
|
|
}
|
|
|
|
/* The LANCE interrupt handler. */
|
|
|
|
static irqreturn_t lance_interrupt( int irq, void *dev_id, struct pt_regs *fp)
|
|
{
|
|
struct net_device *dev = dev_id;
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
int csr0;
|
|
static int in_interrupt;
|
|
|
|
if (dev == NULL) {
|
|
DPRINTK( 1, ( "lance_interrupt(): invalid dev_id\n" ));
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
if (in_interrupt)
|
|
DPRINTK( 2, ( "%s: Re-entering the interrupt handler.\n", dev->name ));
|
|
in_interrupt = 1;
|
|
|
|
still_more:
|
|
flush_cache_all();
|
|
|
|
AREG = CSR0;
|
|
csr0 = DREG;
|
|
|
|
/* ack interrupts */
|
|
DREG = csr0 & (CSR0_TINT | CSR0_RINT | CSR0_IDON);
|
|
|
|
/* clear errors */
|
|
if(csr0 & CSR0_ERR)
|
|
DREG = CSR0_BABL | CSR0_MERR | CSR0_CERR | CSR0_MISS;
|
|
|
|
|
|
DPRINTK( 2, ( "%s: interrupt csr0=%04x new csr=%04x.\n",
|
|
dev->name, csr0, DREG ));
|
|
|
|
if (csr0 & CSR0_TINT) { /* Tx-done interrupt */
|
|
int old_tx = lp->old_tx;
|
|
|
|
// if(lance_debug >= 3) {
|
|
// int i;
|
|
//
|
|
// printk("%s: tx int\n", dev->name);
|
|
//
|
|
// for(i = 0; i < TX_RING_SIZE; i++)
|
|
// printk("ring %d flag=%04x\n", i,
|
|
// MEM->tx_head[i].flag);
|
|
// }
|
|
|
|
while( old_tx != lp->new_tx) {
|
|
struct lance_tx_head *head = &(MEM->tx_head[old_tx]);
|
|
|
|
DPRINTK(3, ("on tx_ring %d\n", old_tx));
|
|
|
|
if (head->flag & TMD1_OWN_CHIP)
|
|
break; /* It still hasn't been Txed */
|
|
|
|
if (head->flag & TMD1_ERR) {
|
|
int status = head->misc;
|
|
lp->stats.tx_errors++;
|
|
if (status & TMD3_RTRY) lp->stats.tx_aborted_errors++;
|
|
if (status & TMD3_LCAR) lp->stats.tx_carrier_errors++;
|
|
if (status & TMD3_LCOL) lp->stats.tx_window_errors++;
|
|
if (status & (TMD3_UFLO | TMD3_BUFF)) {
|
|
lp->stats.tx_fifo_errors++;
|
|
printk("%s: Tx FIFO error\n",
|
|
dev->name);
|
|
REGA(CSR0) = CSR0_STOP;
|
|
REGA(CSR3) = CSR3_BSWP;
|
|
lance_init_ring(dev);
|
|
REGA(CSR0) = CSR0_STRT | CSR0_INEA;
|
|
return IRQ_HANDLED;
|
|
}
|
|
} else if(head->flag & (TMD1_ENP | TMD1_STP)) {
|
|
|
|
head->flag &= ~(TMD1_ENP | TMD1_STP);
|
|
if(head->flag & (TMD1_ONE | TMD1_MORE))
|
|
lp->stats.collisions++;
|
|
|
|
lp->stats.tx_packets++;
|
|
DPRINTK(3, ("cleared tx ring %d\n", old_tx));
|
|
}
|
|
old_tx = (old_tx +1) & TX_RING_MOD_MASK;
|
|
}
|
|
|
|
lp->old_tx = old_tx;
|
|
}
|
|
|
|
|
|
if (netif_queue_stopped(dev)) {
|
|
/* The ring is no longer full, clear tbusy. */
|
|
netif_start_queue(dev);
|
|
netif_wake_queue(dev);
|
|
}
|
|
|
|
if (csr0 & CSR0_RINT) /* Rx interrupt */
|
|
lance_rx( dev );
|
|
|
|
/* Log misc errors. */
|
|
if (csr0 & CSR0_BABL) lp->stats.tx_errors++; /* Tx babble. */
|
|
if (csr0 & CSR0_MISS) lp->stats.rx_errors++; /* Missed a Rx frame. */
|
|
if (csr0 & CSR0_MERR) {
|
|
DPRINTK( 1, ( "%s: Bus master arbitration failure (?!?), "
|
|
"status %04x.\n", dev->name, csr0 ));
|
|
/* Restart the chip. */
|
|
REGA(CSR0) = CSR0_STOP;
|
|
REGA(CSR3) = CSR3_BSWP;
|
|
lance_init_ring(dev);
|
|
REGA(CSR0) = CSR0_STRT | CSR0_INEA;
|
|
}
|
|
|
|
|
|
/* Clear any other interrupt, and set interrupt enable. */
|
|
// DREG = CSR0_BABL | CSR0_CERR | CSR0_MISS | CSR0_MERR |
|
|
// CSR0_IDON | CSR0_INEA;
|
|
|
|
REGA(CSR0) = CSR0_INEA;
|
|
|
|
if(DREG & (CSR0_RINT | CSR0_TINT)) {
|
|
DPRINTK(2, ("restarting interrupt, csr0=%#04x\n", DREG));
|
|
goto still_more;
|
|
}
|
|
|
|
DPRINTK( 2, ( "%s: exiting interrupt, csr0=%#04x.\n",
|
|
dev->name, DREG ));
|
|
in_interrupt = 0;
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
/* get packet, toss into skbuff */
|
|
static int lance_rx( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
int entry = lp->new_rx;
|
|
|
|
/* If we own the next entry, it's a new packet. Send it up. */
|
|
while( (MEM->rx_head[entry].flag & RMD1_OWN) == RMD1_OWN_HOST ) {
|
|
struct lance_rx_head *head = &(MEM->rx_head[entry]);
|
|
int status = head->flag;
|
|
|
|
if (status != (RMD1_ENP|RMD1_STP)) { /* There was an error. */
|
|
/* There is a tricky error noted by John Murphy,
|
|
<murf@perftech.com> to Russ Nelson: Even with
|
|
full-sized buffers it's possible for a jabber packet to use two
|
|
buffers, with only the last correctly noting the error. */
|
|
if (status & RMD1_ENP) /* Only count a general error at the */
|
|
lp->stats.rx_errors++; /* end of a packet.*/
|
|
if (status & RMD1_FRAM) lp->stats.rx_frame_errors++;
|
|
if (status & RMD1_OFLO) lp->stats.rx_over_errors++;
|
|
if (status & RMD1_CRC) lp->stats.rx_crc_errors++;
|
|
if (status & RMD1_BUFF) lp->stats.rx_fifo_errors++;
|
|
head->flag &= (RMD1_ENP|RMD1_STP);
|
|
} else {
|
|
/* Malloc up new buffer, compatible with net-3. */
|
|
// short pkt_len = head->msg_length;// & 0xfff;
|
|
short pkt_len = (head->msg_length & 0xfff) - 4;
|
|
struct sk_buff *skb;
|
|
|
|
if (pkt_len < 60) {
|
|
printk( "%s: Runt packet!\n", dev->name );
|
|
lp->stats.rx_errors++;
|
|
}
|
|
else {
|
|
skb = dev_alloc_skb( pkt_len+2 );
|
|
if (skb == NULL) {
|
|
DPRINTK( 1, ( "%s: Memory squeeze, deferring packet.\n",
|
|
dev->name ));
|
|
|
|
lp->stats.rx_dropped++;
|
|
head->msg_length = 0;
|
|
head->flag |= RMD1_OWN_CHIP;
|
|
lp->new_rx = (lp->new_rx+1) &
|
|
RX_RING_MOD_MASK;
|
|
}
|
|
|
|
#if 0
|
|
if (lance_debug >= 3) {
|
|
u_char *data = PKTBUF_ADDR(head), *p;
|
|
printk( "%s: RX pkt %d type 0x%04x from ", dev->name, entry, ((u_short *)data)[6]);
|
|
for( p = &data[6], i = 0; i < 6; i++ )
|
|
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
|
printk(" to ");
|
|
for( p = data, i = 0; i < 6; i++ )
|
|
printk("%02x%s", *p++, i != 5 ? ":" : "" );
|
|
printk(" data %02x %02x %02x %02x %02x %02x %02x %02x "
|
|
"len %d at %08x\n",
|
|
data[15], data[16], data[17], data[18],
|
|
data[19], data[20], data[21], data[22],
|
|
pkt_len, data);
|
|
}
|
|
#endif
|
|
if (lance_debug >= 3) {
|
|
u_char *data = PKTBUF_ADDR(head);
|
|
printk( "%s: RX pkt %d type 0x%04x len %d\n ", dev->name, entry, ((u_short *)data)[6], pkt_len);
|
|
}
|
|
|
|
|
|
skb->dev = dev;
|
|
skb_reserve( skb, 2 ); /* 16 byte align */
|
|
skb_put( skb, pkt_len ); /* Make room */
|
|
// memcpy( skb->data, PKTBUF_ADDR(head), pkt_len );
|
|
eth_copy_and_sum(skb,
|
|
PKTBUF_ADDR(head),
|
|
pkt_len, 0);
|
|
|
|
skb->protocol = eth_type_trans( skb, dev );
|
|
netif_rx( skb );
|
|
dev->last_rx = jiffies;
|
|
lp->stats.rx_packets++;
|
|
lp->stats.rx_bytes += pkt_len;
|
|
}
|
|
}
|
|
|
|
// head->buf_length = -PKT_BUF_SZ | 0xf000;
|
|
head->msg_length = 0;
|
|
head->flag = RMD1_OWN_CHIP;
|
|
|
|
entry = lp->new_rx = (lp->new_rx +1) & RX_RING_MOD_MASK;
|
|
}
|
|
|
|
/* From lance.c (Donald Becker): */
|
|
/* We should check that at least two ring entries are free.
|
|
If not, we should free one and mark stats->rx_dropped++. */
|
|
|
|
return 0;
|
|
}
|
|
|
|
|
|
static int lance_close( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
|
|
netif_stop_queue(dev);
|
|
|
|
AREG = CSR0;
|
|
|
|
DPRINTK( 2, ( "%s: Shutting down ethercard, status was %2.2x.\n",
|
|
dev->name, DREG ));
|
|
|
|
/* We stop the LANCE here -- it occasionally polls
|
|
memory if we don't. */
|
|
DREG = CSR0_STOP;
|
|
return 0;
|
|
}
|
|
|
|
|
|
static struct net_device_stats *lance_get_stats( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
|
|
return &lp->stats;
|
|
}
|
|
|
|
|
|
/* Set or clear the multicast filter for this adaptor.
|
|
num_addrs == -1 Promiscuous mode, receive all packets
|
|
num_addrs == 0 Normal mode, clear multicast list
|
|
num_addrs > 0 Multicast mode, receive normal and MC packets, and do
|
|
best-effort filtering.
|
|
*/
|
|
|
|
/* completely untested on a sun3 */
|
|
static void set_multicast_list( struct net_device *dev )
|
|
{
|
|
struct lance_private *lp = netdev_priv(dev);
|
|
|
|
if(netif_queue_stopped(dev))
|
|
/* Only possible if board is already started */
|
|
return;
|
|
|
|
/* We take the simple way out and always enable promiscuous mode. */
|
|
DREG = CSR0_STOP; /* Temporarily stop the lance. */
|
|
|
|
if (dev->flags & IFF_PROMISC) {
|
|
/* Log any net taps. */
|
|
DPRINTK( 1, ( "%s: Promiscuous mode enabled.\n", dev->name ));
|
|
REGA( CSR15 ) = 0x8000; /* Set promiscuous mode */
|
|
} else {
|
|
short multicast_table[4];
|
|
int num_addrs = dev->mc_count;
|
|
int i;
|
|
/* We don't use the multicast table, but rely on upper-layer
|
|
* filtering. */
|
|
memset( multicast_table, (num_addrs == 0) ? 0 : -1,
|
|
sizeof(multicast_table) );
|
|
for( i = 0; i < 4; i++ )
|
|
REGA( CSR8+i ) = multicast_table[i];
|
|
REGA( CSR15 ) = 0; /* Unset promiscuous mode */
|
|
}
|
|
|
|
/*
|
|
* Always set BSWP after a STOP as STOP puts it back into
|
|
* little endian mode.
|
|
*/
|
|
REGA( CSR3 ) = CSR3_BSWP;
|
|
|
|
/* Resume normal operation and reset AREG to CSR0 */
|
|
REGA( CSR0 ) = CSR0_IDON | CSR0_INEA | CSR0_STRT;
|
|
}
|
|
|
|
|
|
#ifdef MODULE
|
|
|
|
static struct net_device *sun3lance_dev;
|
|
|
|
int init_module(void)
|
|
{
|
|
sun3lance_dev = sun3lance_probe(-1);
|
|
if (IS_ERR(sun3lance_dev))
|
|
return PTR_ERR(sun3lance_dev);
|
|
return 0;
|
|
}
|
|
|
|
void cleanup_module(void)
|
|
{
|
|
unregister_netdev(sun3lance_dev);
|
|
#ifdef CONFIG_SUN3
|
|
iounmap((void *)sun3lance_dev->base_addr);
|
|
#endif
|
|
free_netdev(sun3lance_dev);
|
|
}
|
|
|
|
#endif /* MODULE */
|
|
|