linux/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts
Jason Gunthorpe 7045ff5a53 ARM: kirkwood: Move the nand node under the mbus node
There should be no nodes that are not children of the mbus. Move
the nand node under the mbus, and rework the board .dts files
to use an & reference to the nand node.

Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Acked-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
2013-10-01 16:36:12 +00:00

222 lines
4.5 KiB
Plaintext

/dts-v1/;
#include "kirkwood.dtsi"
#include "kirkwood-6281.dtsi"
/ {
model = "Iomega StorCenter ix2-200";
compatible = "iom,ix2-200", "marvell,kirkwood-88f6281", "marvell,kirkwood";
memory {
device_type = "memory";
reg = <0x00000000 0x10000000>;
};
chosen {
bootargs = "console=ttyS0,115200n8 earlyprintk";
};
ocp@f1000000 {
pinctrl: pinctrl@10000 {
pinctrl-0 = < &pmx_led_sata_brt_ctrl_1
&pmx_led_sata_brt_ctrl_2
&pmx_led_backup_brt_ctrl_1
&pmx_led_backup_brt_ctrl_2
&pmx_led_power_brt_ctrl_1
&pmx_led_power_brt_ctrl_2
&pmx_led_health_brt_ctrl_1
&pmx_led_health_brt_ctrl_2
&pmx_led_rebuild_brt_ctrl_1
&pmx_led_rebuild_brt_ctrl_2 >;
pinctrl-names = "default";
pmx_button_reset: pmx-button-reset {
marvell,pins = "mpp12";
marvell,function = "gpio";
};
pmx_button_power: pmx-button-power {
marvell,pins = "mpp14";
marvell,function = "gpio";
};
pmx_led_backup: pmx-led-backup {
marvell,pins = "mpp15";
marvell,function = "gpio";
};
pmx_led_power: pmx-led-power {
marvell,pins = "mpp16";
marvell,function = "gpio";
};
pmx_button_otb: pmx-button-otb {
marvell,pins = "mpp35";
marvell,function = "gpio";
};
pmx_led_rebuild: pmx-led-rebuild {
marvell,pins = "mpp36";
marvell,function = "gpio";
};
pmx_led_health: pmx-led_health {
marvell,pins = "mpp37";
marvell,function = "gpio";
};
pmx_led_sata_brt_ctrl_1: pmx-led-sata-brt-ctrl-1 {
marvell,pins = "mpp38";
marvell,function = "gpio";
};
pmx_led_sata_brt_ctrl_2: pmx-led-sata-brt-ctrl-2 {
marvell,pins = "mpp39";
marvell,function = "gpio";
};
pmx_led_backup_brt_ctrl_1: pmx-led-backup-brt-ctrl-1 {
marvell,pins = "mpp40";
marvell,function = "gpio";
};
pmx_led_backup_brt_ctrl_2: pmx-led-backup-brt-ctrl-2 {
marvell,pins = "mpp41";
marvell,function = "gpio";
};
pmx_led_power_brt_ctrl_1: pmx-led-power-brt-ctrl-1 {
marvell,pins = "mpp42";
marvell,function = "gpio";
};
pmx_led_power_brt_ctrl_2: pmx-led-power-brt-ctrl-2 {
marvell,pins = "mpp43";
marvell,function = "gpio";
};
pmx_led_health_brt_ctrl_1: pmx-led-health-brt-ctrl-1 {
marvell,pins = "mpp44";
marvell,function = "gpio";
};
pmx_led_health_brt_ctrl_2: pmx-led-health-brt-ctrl-2 {
marvell,pins = "mpp45";
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_1: pmx-led-rebuild-brt-ctrl-1 {
marvell,pins = "mpp46";
marvell,function = "gpio";
};
pmx_led_rebuild_brt_ctrl_2: pmx-led-rebuild-brt-ctrl-2 {
marvell,pins = "mpp47";
marvell,function = "gpio";
};
};
i2c@11000 {
status = "okay";
lm63: lm63@4c {
compatible = "national,lm63";
reg = <0x4c>;
};
};
serial@12000 {
status = "ok";
};
sata@80000 {
status = "okay";
nr-ports = <2>;
};
};
gpio-leds {
compatible = "gpio-leds";
pinctrl-0 = < &pmx_led_backup &pmx_led_power
&pmx_led_rebuild &pmx_led_health >;
pinctrl-names = "default";
power_led {
label = "status:white:power_led";
gpios = <&gpio0 16 0>;
linux,default-trigger = "default-on";
};
rebuild_led {
label = "status:white:rebuild_led";
gpios = <&gpio1 4 0>;
};
health_led {
label = "status:red:health_led";
gpios = <&gpio1 5 0>;
};
backup_led {
label = "status:blue:backup_led";
gpios = <&gpio0 15 0>;
};
};
gpio-keys {
compatible = "gpio-keys";
#address-cells = <1>;
#size-cells = <0>;
pinctrl-0 = <&pmx_button_reset &pmx_button_power
&pmx_button_otb>;
pinctrl-names = "default";
Power {
label = "Power Button";
linux,code = <116>;
gpios = <&gpio0 14 1>;
};
Reset {
label = "Reset Button";
linux,code = <0x198>;
gpios = <&gpio0 12 1>;
};
OTB {
label = "OTB Button";
linux,code = <133>;
gpios = <&gpio1 3 1>;
};
};
};
&nand {
status = "okay";
partition@0 {
label = "u-boot";
reg = <0x0000000 0x100000>;
read-only;
};
partition@a0000 {
label = "env";
reg = <0xa0000 0x20000>;
read-only;
};
partition@100000 {
label = "uImage";
reg = <0x100000 0x300000>;
};
partition@400000 {
label = "uInitrd";
reg = <0x540000 0x1000000>;
};
};
&mdio {
status = "okay";
ethphy1: ethernet-phy@11 {
device_type = "ethernet-phy";
reg = <11>;
};
};
&eth0 {
status = "okay";
ethernet0-port@0 {
speed = <1000>;
duplex = <1>;
};
};
&eth1 {
status = "okay";
ethernet1-port@0 {
phy-handle = <&ethphy1>;
};
};