linux/arch/arc/kernel/intc-arcv2.c
Joël Porquet 70d93d8941 arc:irqchip: prepare for drivers/irqchip/irqchip.h removal
The IRQCHIP_DECLARE macro migrated to 'include/linux/irqchip.h'.

See commit 91e20b5040
("irqchip: Move IRQCHIP_DECLARE macro to include/linux/irqchip.h").

This patch removes the inclusions of private header 'drivers/irqchip/irqchip.h'
and if necessary replaces them with inclusions of 'include/linux/irqchip.h'.

Signed-off-by: Joel Porquet <joel@porquet.org>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
2015-07-09 17:36:32 +05:30

143 lines
3.8 KiB
C

/*
* Copyright (C) 2014 Synopsys, Inc. (www.synopsys.com)
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/interrupt.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/irqdomain.h>
#include <linux/irqchip.h>
#include <asm/irq.h>
/*
* Early Hardware specific Interrupt setup
* -Called very early (start_kernel -> setup_arch -> setup_processor)
* -Platform Independent (must for any ARC Core)
* -Needed for each CPU (hence not foldable into init_IRQ)
*/
void arc_init_IRQ(void)
{
unsigned int tmp;
struct aux_irq_ctrl {
#ifdef CONFIG_CPU_BIG_ENDIAN
unsigned int res3:18, save_idx_regs:1, res2:1,
save_u_to_u:1, save_lp_regs:1, save_blink:1,
res:4, save_nr_gpr_pairs:5;
#else
unsigned int save_nr_gpr_pairs:5, res:4,
save_blink:1, save_lp_regs:1, save_u_to_u:1,
res2:1, save_idx_regs:1, res3:18;
#endif
} ictrl;
*(unsigned int *)&ictrl = 0;
ictrl.save_nr_gpr_pairs = 6; /* r0 to r11 (r12 saved manually) */
ictrl.save_blink = 1;
ictrl.save_lp_regs = 1; /* LP_COUNT, LP_START, LP_END */
ictrl.save_u_to_u = 0; /* user ctxt saved on kernel stack */
ictrl.save_idx_regs = 1; /* JLI, LDI, EI */
WRITE_AUX(AUX_IRQ_CTRL, ictrl);
/* setup status32, don't enable intr yet as kernel doesn't want */
tmp = read_aux_reg(0xa);
tmp |= ISA_INIT_STATUS_BITS;
tmp &= ~STATUS_IE_MASK;
asm volatile("flag %0 \n"::"r"(tmp));
/*
* ARCv2 core intc provides multiple interrupt priorities (upto 16).
* Typical builds though have only two levels (0-high, 1-low)
* Linux by default uses lower prio 1 for most irqs, reserving 0 for
* NMI style interrupts in future (say perf)
*
* Read the intc BCR to confirm that Linux default priority is avail
* in h/w
*
* Note:
* IRQ_BCR[27..24] contains N-1 (for N priority levels) and prio level
* is 0 based.
*/
tmp = (read_aux_reg(ARC_REG_IRQ_BCR) >> 24 ) & 0xF;
if (ARCV2_IRQ_DEF_PRIO > tmp)
panic("Linux default irq prio incorrect\n");
}
static void arcv2_irq_mask(struct irq_data *data)
{
write_aux_reg(AUX_IRQ_SELECT, data->irq);
write_aux_reg(AUX_IRQ_ENABLE, 0);
}
static void arcv2_irq_unmask(struct irq_data *data)
{
write_aux_reg(AUX_IRQ_SELECT, data->irq);
write_aux_reg(AUX_IRQ_ENABLE, 1);
}
void arcv2_irq_enable(struct irq_data *data)
{
/* set default priority */
write_aux_reg(AUX_IRQ_SELECT, data->irq);
write_aux_reg(AUX_IRQ_PRIORITY, ARCV2_IRQ_DEF_PRIO);
/*
* hw auto enables (linux unmask) all by default
* So no need to do IRQ_ENABLE here
* XXX: However OSCI LAN need it
*/
write_aux_reg(AUX_IRQ_ENABLE, 1);
}
static struct irq_chip arcv2_irq_chip = {
.name = "ARCv2 core Intc",
.irq_mask = arcv2_irq_mask,
.irq_unmask = arcv2_irq_unmask,
.irq_enable = arcv2_irq_enable
};
static int arcv2_irq_map(struct irq_domain *d, unsigned int irq,
irq_hw_number_t hw)
{
if (irq == TIMER0_IRQ || irq == IPI_IRQ)
irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_percpu_irq);
else
irq_set_chip_and_handler(irq, &arcv2_irq_chip, handle_level_irq);
return 0;
}
static const struct irq_domain_ops arcv2_irq_ops = {
.xlate = irq_domain_xlate_onecell,
.map = arcv2_irq_map,
};
static struct irq_domain *root_domain;
static int __init
init_onchip_IRQ(struct device_node *intc, struct device_node *parent)
{
if (parent)
panic("DeviceTree incore intc not a root irq controller\n");
root_domain = irq_domain_add_legacy(intc, NR_CPU_IRQS, 0, 0,
&arcv2_irq_ops, NULL);
if (!root_domain)
panic("root irq domain not avail\n");
/* with this we don't need to export root_domain */
irq_set_default_host(root_domain);
return 0;
}
IRQCHIP_DECLARE(arc_intc, "snps,archs-intc", init_onchip_IRQ);