linux/drivers/clk/ingenic/jz4740-cgu.c
周琰杰 (Zhou Yanjie) 9d9cc58aff clk: Ingenic: Adjust cgu code to make it compatible with X1830.
The PLL of X1830 Soc from Ingenic has been greatly changed,
the bypass control is placed in another register, so now two
registers may needed to control the PLL. To this end, a new
"bypass_reg" was introduced. In addition, when calculating
rate, the PLL of X1830 introduced an extra 2x multiplier,
so a new "rate_multiplier" was introduced. And adjust the
code in jz47xx-cgu.c and x1000-cgu.c, make it to be
compatible with the new cgu code.

Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lkml.kernel.org/r/20200528031549.13846-3-zhouyanjie@wanyeetech.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
2020-05-28 16:13:15 -07:00

262 lines
5.9 KiB
C

// SPDX-License-Identifier: GPL-2.0-or-later
/*
* Ingenic JZ4740 SoC CGU driver
*
* Copyright (c) 2015 Imagination Technologies
* Author: Paul Burton <paul.burton@mips.com>
*/
#include <linux/clk-provider.h>
#include <linux/delay.h>
#include <linux/io.h>
#include <linux/of.h>
#include <dt-bindings/clock/jz4740-cgu.h>
#include "cgu.h"
#include "pm.h"
/* CGU register offsets */
#define CGU_REG_CPCCR 0x00
#define CGU_REG_LCR 0x04
#define CGU_REG_CPPCR 0x10
#define CGU_REG_CLKGR 0x20
#define CGU_REG_SCR 0x24
#define CGU_REG_I2SCDR 0x60
#define CGU_REG_LPCDR 0x64
#define CGU_REG_MSCCDR 0x68
#define CGU_REG_UHCCDR 0x6c
#define CGU_REG_SSICDR 0x74
/* bits within a PLL control register */
#define PLLCTL_M_SHIFT 23
#define PLLCTL_M_MASK (0x1ff << PLLCTL_M_SHIFT)
#define PLLCTL_N_SHIFT 18
#define PLLCTL_N_MASK (0x1f << PLLCTL_N_SHIFT)
#define PLLCTL_OD_SHIFT 16
#define PLLCTL_OD_MASK (0x3 << PLLCTL_OD_SHIFT)
#define PLLCTL_STABLE (1 << 10)
#define PLLCTL_BYPASS (1 << 9)
#define PLLCTL_ENABLE (1 << 8)
/* bits within the LCR register */
#define LCR_SLEEP (1 << 0)
/* bits within the CLKGR register */
#define CLKGR_UDC (1 << 11)
static struct ingenic_cgu *cgu;
static const s8 pll_od_encoding[4] = {
0x0, 0x1, -1, 0x3,
};
static const u8 jz4740_cgu_cpccr_div_table[] = {
1, 2, 3, 4, 6, 8, 12, 16, 24, 32,
};
static const u8 jz4740_cgu_pll_half_div_table[] = {
2, 1,
};
static const struct ingenic_cgu_clk_info jz4740_cgu_clocks[] = {
/* External clocks */
[JZ4740_CLK_EXT] = { "ext", CGU_CLK_EXT },
[JZ4740_CLK_RTC] = { "rtc", CGU_CLK_EXT },
[JZ4740_CLK_PLL] = {
"pll", CGU_CLK_PLL,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.pll = {
.reg = CGU_REG_CPPCR,
.rate_multiplier = 1,
.m_shift = 23,
.m_bits = 9,
.m_offset = 2,
.n_shift = 18,
.n_bits = 5,
.n_offset = 2,
.od_shift = 16,
.od_bits = 2,
.od_max = 4,
.od_encoding = pll_od_encoding,
.stable_bit = 10,
.bypass_reg = CGU_REG_CPPCR,
.bypass_bit = 9,
.enable_bit = 8,
},
},
/* Muxes & dividers */
[JZ4740_CLK_PLL_HALF] = {
"pll half", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 21, 1, 1, -1, -1, -1,
jz4740_cgu_pll_half_div_table,
},
},
[JZ4740_CLK_CCLK] = {
"cclk", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 0, 1, 4, 22, -1, -1,
jz4740_cgu_cpccr_div_table,
},
},
[JZ4740_CLK_HCLK] = {
"hclk", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 4, 1, 4, 22, -1, -1,
jz4740_cgu_cpccr_div_table,
},
},
[JZ4740_CLK_PCLK] = {
"pclk", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 8, 1, 4, 22, -1, -1,
jz4740_cgu_cpccr_div_table,
},
},
[JZ4740_CLK_MCLK] = {
"mclk", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 12, 1, 4, 22, -1, -1,
jz4740_cgu_cpccr_div_table,
},
},
[JZ4740_CLK_LCD] = {
"lcd", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
.div = {
CGU_REG_CPCCR, 16, 1, 5, 22, -1, -1,
jz4740_cgu_cpccr_div_table,
},
.gate = { CGU_REG_CLKGR, 10 },
},
[JZ4740_CLK_LCD_PCLK] = {
"lcd_pclk", CGU_CLK_DIV,
.parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
.div = { CGU_REG_LPCDR, 0, 1, 11, -1, -1, -1 },
},
[JZ4740_CLK_I2S] = {
"i2s", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
.mux = { CGU_REG_CPCCR, 31, 1 },
.div = { CGU_REG_I2SCDR, 0, 1, 9, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 6 },
},
[JZ4740_CLK_SPI] = {
"spi", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL, -1, -1 },
.mux = { CGU_REG_SSICDR, 31, 1 },
.div = { CGU_REG_SSICDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 4 },
},
[JZ4740_CLK_MMC] = {
"mmc", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
.div = { CGU_REG_MSCCDR, 0, 1, 5, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 7 },
},
[JZ4740_CLK_UHC] = {
"uhc", CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_PLL_HALF, -1, -1, -1 },
.div = { CGU_REG_UHCCDR, 0, 1, 4, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 14 },
},
[JZ4740_CLK_UDC] = {
"udc", CGU_CLK_MUX | CGU_CLK_DIV | CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, JZ4740_CLK_PLL_HALF, -1, -1 },
.mux = { CGU_REG_CPCCR, 29, 1 },
.div = { CGU_REG_CPCCR, 23, 1, 6, -1, -1, -1 },
.gate = { CGU_REG_SCR, 6, true },
},
/* Gate-only clocks */
[JZ4740_CLK_UART0] = {
"uart0", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 0 },
},
[JZ4740_CLK_UART1] = {
"uart1", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 15 },
},
[JZ4740_CLK_DMA] = {
"dma", CGU_CLK_GATE,
.parents = { JZ4740_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 12 },
},
[JZ4740_CLK_IPU] = {
"ipu", CGU_CLK_GATE,
.parents = { JZ4740_CLK_PCLK, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 13 },
},
[JZ4740_CLK_ADC] = {
"adc", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 8 },
},
[JZ4740_CLK_I2C] = {
"i2c", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 3 },
},
[JZ4740_CLK_AIC] = {
"aic", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 5 },
},
[JZ4740_CLK_TCU] = {
"tcu", CGU_CLK_GATE,
.parents = { JZ4740_CLK_EXT, -1, -1, -1 },
.gate = { CGU_REG_CLKGR, 1 },
},
};
static void __init jz4740_cgu_init(struct device_node *np)
{
int retval;
cgu = ingenic_cgu_new(jz4740_cgu_clocks,
ARRAY_SIZE(jz4740_cgu_clocks), np);
if (!cgu) {
pr_err("%s: failed to initialise CGU\n", __func__);
return;
}
retval = ingenic_cgu_register_clocks(cgu);
if (retval)
pr_err("%s: failed to register CGU Clocks\n", __func__);
ingenic_cgu_register_syscore_ops(cgu);
}
CLK_OF_DECLARE_DRIVER(jz4740_cgu, "ingenic,jz4740-cgu", jz4740_cgu_init);