linux/arch/arm/boot/dts/da850.dtsi
Kumar, Anil 518f97dbb8 ARM: davinci: da850: add wdt DT node
Add da850 wdt DT node.
Add OF_DEV_AUXDATA for wdt driver to use wdt clock.

Signed-off-by: Kumar, Anil <anilkumar.v@ti.com>
Signed-off-by: Sekhar Nori <nsekhar@ti.com>
2013-02-09 22:38:26 +05:30

125 lines
2.9 KiB
Plaintext

/*
* Copyright 2012 DENX Software Engineering GmbH
* Heiko Schocher <hs@denx.de>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*/
/include/ "skeleton.dtsi"
/ {
arm {
#address-cells = <1>;
#size-cells = <1>;
ranges;
intc: interrupt-controller {
compatible = "ti,cp-intc";
interrupt-controller;
#interrupt-cells = <1>;
ti,intc-size = <100>;
reg = <0xfffee000 0x2000>;
};
};
soc {
compatible = "simple-bus";
model = "da850";
#address-cells = <1>;
#size-cells = <1>;
ranges = <0x0 0x01c00000 0x400000>;
interrupt-parent = <&intc>;
pmx_core: pinmux@1c14120 {
compatible = "pinctrl-single";
reg = <0x14120 0x50>;
#address-cells = <1>;
#size-cells = <0>;
pinctrl-single,bit-per-mux;
pinctrl-single,register-width = <32>;
pinctrl-single,function-mask = <0xffffffff>;
status = "disabled";
nand_cs3_pins: pinmux_nand_pins {
pinctrl-single,bits = <
/* EMA_OE, EMA_WE */
0x1c 0x00110000 0x00ff0000
/* EMA_CS[4],EMA_CS[3]*/
0x1c 0x00000110 0x00000ff0
/*
* EMA_D[0], EMA_D[1], EMA_D[2],
* EMA_D[3], EMA_D[4], EMA_D[5],
* EMA_D[6], EMA_D[7]
*/
0x24 0x11111111 0xffffffff
/* EMA_A[1], EMA_A[2] */
0x30 0x01100000 0x0ff00000
>;
};
i2c0_pins: pinmux_i2c0_pins {
pinctrl-single,bits = <
/* I2C0_SDA,I2C0_SCL */
0x10 0x00002200 0x0000ff00
>;
};
};
serial0: serial@1c42000 {
compatible = "ns16550a";
reg = <0x42000 0x100>;
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <25>;
status = "disabled";
};
serial1: serial@1d0c000 {
compatible = "ns16550a";
reg = <0x10c000 0x100>;
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <53>;
status = "disabled";
};
serial2: serial@1d0d000 {
compatible = "ns16550a";
reg = <0x10d000 0x100>;
clock-frequency = <150000000>;
reg-shift = <2>;
interrupts = <61>;
status = "disabled";
};
rtc0: rtc@1c23000 {
compatible = "ti,da830-rtc";
reg = <0x23000 0x1000>;
interrupts = <19
19>;
status = "disabled";
};
i2c0: i2c@1c22000 {
compatible = "ti,davinci-i2c";
reg = <0x22000 0x1000>;
interrupts = <15>;
#address-cells = <1>;
#size-cells = <0>;
status = "disabled";
};
wdt: wdt@1c21000 {
compatible = "ti,davinci-wdt";
reg = <0x21000 0x1000>;
status = "disabled";
};
};
nand_cs3@62000000 {
compatible = "ti,davinci-nand";
reg = <0x62000000 0x807ff
0x68000000 0x8000>;
ti,davinci-chipselect = <1>;
ti,davinci-mask-ale = <0>;
ti,davinci-mask-cle = <0>;
ti,davinci-mask-chipsel = <0>;
ti,davinci-ecc-mode = "hw";
ti,davinci-ecc-bits = <4>;
ti,davinci-nand-use-bbt;
status = "disabled";
};
};