linux/drivers/cpufreq/omap-cpufreq.c
Paul Gortmaker 2760984f65 cpufreq: delete __cpuinit usage from all cpufreq files
The __cpuinit type of throwaway sections might have made sense
some time ago when RAM was more constrained, but now the savings
do not offset the cost and complications.  For example, the fix in
commit 5e427ec2d0 ("x86: Fix bit corruption at CPU resume time")
is a good example of the nasty type of bugs that can be created
with improper use of the various __init prefixes.

After a discussion on LKML[1] it was decided that cpuinit should go
the way of devinit and be phased out.  Once all the users are gone,
we can then finally remove the macros themselves from linux/init.h.

This removes all the drivers/cpufreq uses of the __cpuinit macros
from all C files.

[1] https://lkml.org/lkml/2013/5/20/589

[v2: leave 2nd lines of args misaligned as requested by Viresh]
Cc: "Rafael J. Wysocki" <rjw@sisk.pl>
Cc: Viresh Kumar <viresh.kumar@linaro.org>
Cc: cpufreq@vger.kernel.org
Cc: linux-pm@vger.kernel.org
Acked-by: Dirk Brandewie <dirk.j.brandewie@intel.com>
Acked-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
2013-07-14 19:36:57 -04:00

292 lines
6.9 KiB
C

/*
* CPU frequency scaling for OMAP using OPP information
*
* Copyright (C) 2005 Nokia Corporation
* Written by Tony Lindgren <tony@atomide.com>
*
* Based on cpu-sa1110.c, Copyright (C) 2001 Russell King
*
* Copyright (C) 2007-2011 Texas Instruments, Inc.
* - OMAP3/4 support by Rajendra Nayak, Santosh Shilimkar
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/cpufreq.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
#include <linux/opp.h>
#include <linux/cpu.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include <linux/regulator/consumer.h>
#include <asm/smp_plat.h>
#include <asm/cpu.h>
/* OPP tolerance in percentage */
#define OPP_TOLERANCE 4
static struct cpufreq_frequency_table *freq_table;
static atomic_t freq_table_users = ATOMIC_INIT(0);
static struct clk *mpu_clk;
static struct device *mpu_dev;
static struct regulator *mpu_reg;
static int omap_verify_speed(struct cpufreq_policy *policy)
{
if (!freq_table)
return -EINVAL;
return cpufreq_frequency_table_verify(policy, freq_table);
}
static unsigned int omap_getspeed(unsigned int cpu)
{
unsigned long rate;
if (cpu >= NR_CPUS)
return 0;
rate = clk_get_rate(mpu_clk) / 1000;
return rate;
}
static int omap_target(struct cpufreq_policy *policy,
unsigned int target_freq,
unsigned int relation)
{
unsigned int i;
int r, ret = 0;
struct cpufreq_freqs freqs;
struct opp *opp;
unsigned long freq, volt = 0, volt_old = 0, tol = 0;
if (!freq_table) {
dev_err(mpu_dev, "%s: cpu%d: no freq table!\n", __func__,
policy->cpu);
return -EINVAL;
}
ret = cpufreq_frequency_table_target(policy, freq_table, target_freq,
relation, &i);
if (ret) {
dev_dbg(mpu_dev, "%s: cpu%d: no freq match for %d(ret=%d)\n",
__func__, policy->cpu, target_freq, ret);
return ret;
}
freqs.new = freq_table[i].frequency;
if (!freqs.new) {
dev_err(mpu_dev, "%s: cpu%d: no match for freq %d\n", __func__,
policy->cpu, target_freq);
return -EINVAL;
}
freqs.old = omap_getspeed(policy->cpu);
if (freqs.old == freqs.new && policy->cur == freqs.new)
return ret;
freq = freqs.new * 1000;
ret = clk_round_rate(mpu_clk, freq);
if (IS_ERR_VALUE(ret)) {
dev_warn(mpu_dev,
"CPUfreq: Cannot find matching frequency for %lu\n",
freq);
return ret;
}
freq = ret;
if (mpu_reg) {
rcu_read_lock();
opp = opp_find_freq_ceil(mpu_dev, &freq);
if (IS_ERR(opp)) {
rcu_read_unlock();
dev_err(mpu_dev, "%s: unable to find MPU OPP for %d\n",
__func__, freqs.new);
return -EINVAL;
}
volt = opp_get_voltage(opp);
rcu_read_unlock();
tol = volt * OPP_TOLERANCE / 100;
volt_old = regulator_get_voltage(mpu_reg);
}
dev_dbg(mpu_dev, "cpufreq-omap: %u MHz, %ld mV --> %u MHz, %ld mV\n",
freqs.old / 1000, volt_old ? volt_old / 1000 : -1,
freqs.new / 1000, volt ? volt / 1000 : -1);
/* notifiers */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_PRECHANGE);
/* scaling up? scale voltage before frequency */
if (mpu_reg && (freqs.new > freqs.old)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage up.\n",
__func__);
freqs.new = freqs.old;
goto done;
}
}
ret = clk_set_rate(mpu_clk, freqs.new * 1000);
/* scaling down? scale voltage after frequency */
if (mpu_reg && (freqs.new < freqs.old)) {
r = regulator_set_voltage(mpu_reg, volt - tol, volt + tol);
if (r < 0) {
dev_warn(mpu_dev, "%s: unable to scale voltage down.\n",
__func__);
ret = clk_set_rate(mpu_clk, freqs.old * 1000);
freqs.new = freqs.old;
goto done;
}
}
freqs.new = omap_getspeed(policy->cpu);
done:
/* notifiers */
cpufreq_notify_transition(policy, &freqs, CPUFREQ_POSTCHANGE);
return ret;
}
static inline void freq_table_free(void)
{
if (atomic_dec_and_test(&freq_table_users))
opp_free_cpufreq_table(mpu_dev, &freq_table);
}
static int omap_cpu_init(struct cpufreq_policy *policy)
{
int result = 0;
mpu_clk = clk_get(NULL, "cpufreq_ck");
if (IS_ERR(mpu_clk))
return PTR_ERR(mpu_clk);
if (policy->cpu >= NR_CPUS) {
result = -EINVAL;
goto fail_ck;
}
policy->cur = omap_getspeed(policy->cpu);
if (!freq_table)
result = opp_init_cpufreq_table(mpu_dev, &freq_table);
if (result) {
dev_err(mpu_dev, "%s: cpu%d: failed creating freq table[%d]\n",
__func__, policy->cpu, result);
goto fail_ck;
}
atomic_inc_return(&freq_table_users);
result = cpufreq_frequency_table_cpuinfo(policy, freq_table);
if (result)
goto fail_table;
cpufreq_frequency_table_get_attr(freq_table, policy->cpu);
policy->cur = omap_getspeed(policy->cpu);
/*
* On OMAP SMP configuartion, both processors share the voltage
* and clock. So both CPUs needs to be scaled together and hence
* needs software co-ordination. Use cpufreq affected_cpus
* interface to handle this scenario. Additional is_smp() check
* is to keep SMP_ON_UP build working.
*/
if (is_smp())
cpumask_setall(policy->cpus);
/* FIXME: what's the actual transition time? */
policy->cpuinfo.transition_latency = 300 * 1000;
return 0;
fail_table:
freq_table_free();
fail_ck:
clk_put(mpu_clk);
return result;
}
static int omap_cpu_exit(struct cpufreq_policy *policy)
{
freq_table_free();
clk_put(mpu_clk);
return 0;
}
static struct freq_attr *omap_cpufreq_attr[] = {
&cpufreq_freq_attr_scaling_available_freqs,
NULL,
};
static struct cpufreq_driver omap_driver = {
.flags = CPUFREQ_STICKY,
.verify = omap_verify_speed,
.target = omap_target,
.get = omap_getspeed,
.init = omap_cpu_init,
.exit = omap_cpu_exit,
.name = "omap",
.attr = omap_cpufreq_attr,
};
static int omap_cpufreq_probe(struct platform_device *pdev)
{
mpu_dev = get_cpu_device(0);
if (!mpu_dev) {
pr_warning("%s: unable to get the mpu device\n", __func__);
return -EINVAL;
}
mpu_reg = regulator_get(mpu_dev, "vcc");
if (IS_ERR(mpu_reg)) {
pr_warning("%s: unable to get MPU regulator\n", __func__);
mpu_reg = NULL;
} else {
/*
* Ensure physical regulator is present.
* (e.g. could be dummy regulator.)
*/
if (regulator_get_voltage(mpu_reg) < 0) {
pr_warn("%s: physical regulator not present for MPU\n",
__func__);
regulator_put(mpu_reg);
mpu_reg = NULL;
}
}
return cpufreq_register_driver(&omap_driver);
}
static int omap_cpufreq_remove(struct platform_device *pdev)
{
return cpufreq_unregister_driver(&omap_driver);
}
static struct platform_driver omap_cpufreq_platdrv = {
.driver = {
.name = "omap-cpufreq",
.owner = THIS_MODULE,
},
.probe = omap_cpufreq_probe,
.remove = omap_cpufreq_remove,
};
module_platform_driver(omap_cpufreq_platdrv);
MODULE_DESCRIPTION("cpufreq driver for OMAP SoCs");
MODULE_LICENSE("GPL");