linux/drivers/net/wireless/ath/ath6kl/hif.h
Kalle Valo 636f828844 ath6kl: Add HTC pipe implementation
This is needed for USB.

Based on code by Kevin Fang.

Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
2012-03-26 16:36:46 +03:00

283 lines
9.1 KiB
C

/*
* Copyright (c) 2004-2011 Atheros Communications Inc.
* Copyright (c) 2011 Qualcomm Atheros, Inc.
*
* Permission to use, copy, modify, and/or distribute this software for any
* purpose with or without fee is hereby granted, provided that the above
* copyright notice and this permission notice appear in all copies.
*
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
*/
#ifndef HIF_H
#define HIF_H
#include "common.h"
#include "core.h"
#include <linux/scatterlist.h>
#define BUS_REQUEST_MAX_NUM 64
#define HIF_MBOX_BLOCK_SIZE 128
#define HIF_MBOX0_BLOCK_SIZE 1
#define HIF_DMA_BUFFER_SIZE (32 * 1024)
#define CMD53_FIXED_ADDRESS 1
#define CMD53_INCR_ADDRESS 2
#define MAX_SCATTER_REQUESTS 4
#define MAX_SCATTER_ENTRIES_PER_REQ 16
#define MAX_SCATTER_REQ_TRANSFER_SIZE (32 * 1024)
#define MANUFACTURER_ID_AR6003_BASE 0x300
#define MANUFACTURER_ID_AR6004_BASE 0x400
/* SDIO manufacturer ID and Codes */
#define MANUFACTURER_ID_ATH6KL_BASE_MASK 0xFF00
#define MANUFACTURER_CODE 0x271 /* Atheros */
/* Mailbox address in SDIO address space */
#define HIF_MBOX_BASE_ADDR 0x800
#define HIF_MBOX_WIDTH 0x800
#define HIF_MBOX_END_ADDR (HTC_MAILBOX_NUM_MAX * HIF_MBOX_WIDTH - 1)
/* version 1 of the chip has only a 12K extended mbox range */
#define HIF_MBOX0_EXT_BASE_ADDR 0x4000
#define HIF_MBOX0_EXT_WIDTH (12*1024)
/* GMBOX addresses */
#define HIF_GMBOX_BASE_ADDR 0x7000
#define HIF_GMBOX_WIDTH 0x4000
/* interrupt mode register */
#define CCCR_SDIO_IRQ_MODE_REG 0xF0
/* mode to enable special 4-bit interrupt assertion without clock */
#define SDIO_IRQ_MODE_ASYNC_4BIT_IRQ (1 << 0)
/* HTC runs over mailbox 0 */
#define HTC_MAILBOX 0
#define ATH6KL_TARGET_DEBUG_INTR_MASK 0x01
/* FIXME: are these duplicates with MAX_SCATTER_ values in hif.h? */
#define ATH6KL_SCATTER_ENTRIES_PER_REQ 16
#define ATH6KL_MAX_TRANSFER_SIZE_PER_SCATTER (16 * 1024)
#define ATH6KL_SCATTER_REQS 4
#define ATH6KL_HIF_COMMUNICATION_TIMEOUT 1000
struct bus_request {
struct list_head list;
/* request data */
u32 address;
u8 *buffer;
u32 length;
u32 request;
struct htc_packet *packet;
int status;
/* this is a scatter request */
struct hif_scatter_req *scat_req;
};
/* direction of transfer (read/write) */
#define HIF_READ 0x00000001
#define HIF_WRITE 0x00000002
#define HIF_DIR_MASK (HIF_READ | HIF_WRITE)
/*
* emode - This indicates the whether the command is to be executed in a
* blocking or non-blocking fashion (HIF_SYNCHRONOUS/
* HIF_ASYNCHRONOUS). The read/write data paths in HTC have been
* implemented using the asynchronous mode allowing the the bus
* driver to indicate the completion of operation through the
* registered callback routine. The requirement primarily comes
* from the contexts these operations get called from (a driver's
* transmit context or the ISR context in case of receive).
* Support for both of these modes is essential.
*/
#define HIF_SYNCHRONOUS 0x00000010
#define HIF_ASYNCHRONOUS 0x00000020
#define HIF_EMODE_MASK (HIF_SYNCHRONOUS | HIF_ASYNCHRONOUS)
/*
* dmode - An interface may support different kinds of commands based on
* the tradeoff between the amount of data it can carry and the
* setup time. Byte and Block modes are supported (HIF_BYTE_BASIS/
* HIF_BLOCK_BASIS). In case of latter, the data is rounded off
* to the nearest block size by padding. The size of the block is
* configurable at compile time using the HIF_BLOCK_SIZE and is
* negotiated with the target during initialization after the
* ATH6KL interrupts are enabled.
*/
#define HIF_BYTE_BASIS 0x00000040
#define HIF_BLOCK_BASIS 0x00000080
#define HIF_DMODE_MASK (HIF_BYTE_BASIS | HIF_BLOCK_BASIS)
/*
* amode - This indicates if the address has to be incremented on ATH6KL
* after every read/write operation (HIF?FIXED_ADDRESS/
* HIF_INCREMENTAL_ADDRESS).
*/
#define HIF_FIXED_ADDRESS 0x00000100
#define HIF_INCREMENTAL_ADDRESS 0x00000200
#define HIF_AMODE_MASK (HIF_FIXED_ADDRESS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_ASYNC_BYTE_INC \
(HIF_WRITE | HIF_ASYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_ASYNC_BLOCK_INC \
(HIF_WRITE | HIF_ASYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_SYNC_BYTE_FIX \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
#define HIF_WR_SYNC_BYTE_INC \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_WR_SYNC_BLOCK_INC \
(HIF_WRITE | HIF_SYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_RD_SYNC_BYTE_INC \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_INCREMENTAL_ADDRESS)
#define HIF_RD_SYNC_BYTE_FIX \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BYTE_BASIS | HIF_FIXED_ADDRESS)
#define HIF_RD_ASYNC_BLOCK_FIX \
(HIF_READ | HIF_ASYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
#define HIF_RD_SYNC_BLOCK_FIX \
(HIF_READ | HIF_SYNCHRONOUS | \
HIF_BLOCK_BASIS | HIF_FIXED_ADDRESS)
struct hif_scatter_item {
u8 *buf;
int len;
struct htc_packet *packet;
};
struct hif_scatter_req {
struct list_head list;
/* address for the read/write operation */
u32 addr;
/* request flags */
u32 req;
/* total length of entire transfer */
u32 len;
bool virt_scat;
void (*complete) (struct htc_target *, struct hif_scatter_req *);
int status;
int scat_entries;
struct bus_request *busrequest;
struct scatterlist *sgentries;
/* bounce buffer for upper layers to copy to/from */
u8 *virt_dma_buf;
struct hif_scatter_item scat_list[1];
u32 scat_q_depth;
};
struct ath6kl_irq_proc_registers {
u8 host_int_status;
u8 cpu_int_status;
u8 error_int_status;
u8 counter_int_status;
u8 mbox_frame;
u8 rx_lkahd_valid;
u8 host_int_status2;
u8 gmbox_rx_avail;
__le32 rx_lkahd[2];
__le32 rx_gmbox_lkahd_alias[2];
} __packed;
struct ath6kl_irq_enable_reg {
u8 int_status_en;
u8 cpu_int_status_en;
u8 err_int_status_en;
u8 cntr_int_status_en;
} __packed;
struct ath6kl_device {
/* protects irq_proc_reg and irq_en_reg below */
spinlock_t lock;
struct ath6kl_irq_proc_registers irq_proc_reg;
struct ath6kl_irq_enable_reg irq_en_reg;
struct htc_target *htc_cnxt;
struct ath6kl *ar;
};
struct ath6kl_hif_ops {
int (*read_write_sync)(struct ath6kl *ar, u32 addr, u8 *buf,
u32 len, u32 request);
int (*write_async)(struct ath6kl *ar, u32 address, u8 *buffer,
u32 length, u32 request, struct htc_packet *packet);
void (*irq_enable)(struct ath6kl *ar);
void (*irq_disable)(struct ath6kl *ar);
struct hif_scatter_req *(*scatter_req_get)(struct ath6kl *ar);
void (*scatter_req_add)(struct ath6kl *ar,
struct hif_scatter_req *s_req);
int (*enable_scatter)(struct ath6kl *ar);
int (*scat_req_rw) (struct ath6kl *ar,
struct hif_scatter_req *scat_req);
void (*cleanup_scatter)(struct ath6kl *ar);
int (*suspend)(struct ath6kl *ar, struct cfg80211_wowlan *wow);
int (*resume)(struct ath6kl *ar);
int (*diag_read32)(struct ath6kl *ar, u32 address, u32 *value);
int (*diag_write32)(struct ath6kl *ar, u32 address, __le32 value);
int (*bmi_read)(struct ath6kl *ar, u8 *buf, u32 len);
int (*bmi_write)(struct ath6kl *ar, u8 *buf, u32 len);
int (*power_on)(struct ath6kl *ar);
int (*power_off)(struct ath6kl *ar);
void (*stop)(struct ath6kl *ar);
int (*pipe_send)(struct ath6kl *ar, u8 pipe, struct sk_buff *hdr_buf,
struct sk_buff *buf);
void (*pipe_get_default)(struct ath6kl *ar, u8 *pipe_ul, u8 *pipe_dl);
int (*pipe_map_service)(struct ath6kl *ar, u16 service_id, u8 *pipe_ul,
u8 *pipe_dl);
u16 (*pipe_get_free_queue_number)(struct ath6kl *ar, u8 pipe);
};
int ath6kl_hif_setup(struct ath6kl_device *dev);
int ath6kl_hif_unmask_intrs(struct ath6kl_device *dev);
int ath6kl_hif_mask_intrs(struct ath6kl_device *dev);
int ath6kl_hif_poll_mboxmsg_rx(struct ath6kl_device *dev,
u32 *lk_ahd, int timeout);
int ath6kl_hif_rx_control(struct ath6kl_device *dev, bool enable_rx);
int ath6kl_hif_disable_intrs(struct ath6kl_device *dev);
int ath6kl_hif_rw_comp_handler(void *context, int status);
int ath6kl_hif_intr_bh_handler(struct ath6kl *ar);
/* Scatter Function and Definitions */
int ath6kl_hif_submit_scat_req(struct ath6kl_device *dev,
struct hif_scatter_req *scat_req, bool read);
#endif