linux/arch/arm
David Brownell 994c84ea52 ARM: OMAP: h4 must have blinky leds!!
This adds generic support for the "debug board" LEDs used by most of
TI's OMAP reference boards, and board-specific support for the H4.

It's derived from the not-as-generic stuff used by OMAP1 H2/H3/P2.
Those should be able to switch easily to this version, and clean up
some of the omap1-specific code.

In addition to H4 support, one key improvement is supporting not just
the "old" ARM debug LED API (with timer and idle LEDs, plus four that
can be handy for kernel debugging), but it also supports the "new"
generic LED API (most useful for usermode stuff IMO).  Either or both
APIs can be enabled.

Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
2007-05-08 20:35:48 +01:00
..
boot [ARM] 4216/1: add .gitignore entries for ARM specific files 2007-02-17 11:26:41 +00:00
common [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
configs [ARM] 4313/1: S3C24XX: Update s3c2410 defconfig to 2.6.21-rc6 2007-04-16 21:03:00 +01:00
kernel [ARM] ptrace: clean up single stepping support 2007-04-21 20:34:58 +01:00
lib [ARM] getuser.S and putuser.S don't need thread_info.h nor asm-offsets.h 2007-04-21 20:35:22 +01:00
mach-aaec2000 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-at91 [ARM] 4289/1: AT91: SAM9260 NAND flash timing 2007-03-29 11:28:16 +01:00
mach-clps711x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-clps7500 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-ebsa110 [ARM] EBSA110: Add readsw/readsl/writesw/writesl 2007-04-21 20:34:37 +01:00
mach-ep93xx [ARM] 4142/1: ep93xx: handle IRQT_NOEDGE 2007-02-08 14:56:06 +00:00
mach-footbridge [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-h720x [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-imx [ARM] 4255/1: i.MX/MX1 Correct MPU PLL reference clock value. 2007-03-12 16:49:35 +00:00
mach-integrator [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-iop13xx Merge ARM fixes 2007-02-20 19:13:30 +00:00
mach-iop32x [ARM] 4271/1: iop32x: fix ep80219 detection (support iq80219 platforms) 2007-03-17 22:33:26 +00:00
mach-iop33x [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx 2007-02-17 15:05:40 +00:00
mach-ixp4xx Merge branch 'for-linus' of master.kernel.org:/home/rmk/linux-2.6-arm 2007-02-19 13:18:39 -08:00
mach-ixp23xx [ARM] 3994/1: ixp23xx: fix handling of pci master aborts 2006-12-07 16:16:19 +00:00
mach-ixp2000 [ARM] 3965/1: ixp2000: fix handling of pci master aborts 2006-12-01 16:55:22 +00:00
mach-l7200 [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-lh7a40x [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-netx [PATCH] clocksource: fixup is_continous changes on ARM 2007-02-16 08:13:57 -08:00
mach-ns9xxx [ARM] 4247/1: Fix long name for cc9p9360dev 2007-03-08 13:33:56 +00:00
mach-omap1 ARM: OMAP: gpio init section cleanups 2007-05-08 20:20:37 +01:00
mach-omap2 ARM: OMAP: h4 must have blinky leds!! 2007-05-08 20:35:48 +01:00
mach-pnx4008 i2c: New Philips PNX bus driver 2006-12-10 21:21:29 +01:00
mach-pxa [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-realview [ARM] 4201/1: SMP barriers pair needed for the secondary boot process 2007-02-16 13:06:56 +00:00
mach-rpc [ARM] Remove compatibility layer for ARM irqs 2006-11-30 12:24:47 +00:00
mach-s3c2400 [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
mach-s3c2410 [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-s3c2412 [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-s3c2440 [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-s3c2442 [ARM] 4157/2: S3C24XX: move arch/arch/mach-s3c2410 into cpu components 2007-02-11 17:36:09 +00:00
mach-s3c2443 [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-sa1100 [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-shark [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mach-versatile [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
mm [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
nwfpe [ARM] 3729/3: EABI padding rules necessitate the packed attribute of floatx80 2006-07-13 13:04:24 +01:00
oprofile [ARM] 4237/2: oprofile: Always allow backtraces on ARM 2007-03-02 11:58:58 +00:00
plat-iop [ARM] 4187/1: iop: unify time implementation across iop32x, iop33x, and iop13xx 2007-02-17 15:05:40 +00:00
plat-omap ARM: OMAP: h4 must have blinky leds!! 2007-05-08 20:35:48 +01:00
plat-s3c24xx [ARM] Remove needless linux/ptrace.h includes 2007-04-21 20:34:47 +01:00
tools [ARM] Update mach-types 2007-04-16 21:01:56 +01:00
vfp [ARM] 4111/1: Allow VFP to work with thread migration on SMP 2007-01-25 16:35:29 +00:00
Kconfig [PATCH] add CONFIG_GENERIC_GPIO 2007-03-05 07:57:51 -08:00
Kconfig-nommu [ARM] nommu: manage the CP15 things 2006-09-27 17:34:30 +01:00
Kconfig.debug [ARM] Remove DEBUG_WAITQ 2006-11-30 12:24:47 +00:00
Makefile [ARM] fix mach-at91 build breakage 2007-02-20 15:28:40 +00:00