Marek Behún e3af71a36f net: dsa: mv88e6xxx: Fix phylink_validate for Topaz family ... The Topaz family should have different phylink_validate method from the Peridot, since on Topaz the port supporting 2500BaseX mode is port 5, not 9 and 10. Signed-off-by: Marek Behún <marek.behun@nic.cz> Reviewed-by: Andrew Lunn <andrew@lunn.ch> Signed-off-by: David S. Miller <davem@davemloft.net>		2019-02-25 09:47:09 -08:00
..
b53	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
microchip	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
mv88e6xxx	net: dsa: mv88e6xxx: Fix phylink_validate for Topaz family	2019-02-25 09:47:09 -08:00
bcm_sf2.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
bcm_sf2.h	net: dsa: bcm_sf2: Add support for CFP statistics	2019-02-08 22:11:07 -08:00
bcm_sf2_cfp.c	net: dsa: bcm_sf2: Remove set but not used variables 'v6_spec, v6_m_spec'	2019-02-17 15:31:47 -08:00
bcm_sf2_regs.h	net: dsa: bcm_sf2: Add support for CFP statistics	2019-02-08 22:11:07 -08:00
dsa_loop.c	net: phy: fixed-phy: Drop GPIO from fixed_phy_add()	2019-02-04 18:33:36 -08:00
dsa_loop.h
dsa_loop_bdinfo.c
Kconfig	net: dsa: lantiq_gswip: Depend on HAS_IOMEM	2018-09-25 20:27:43 -07:00
lan9303-core.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
lan9303.h
lan9303_i2c.c
lan9303_mdio.c
lantiq_gswip.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
lantiq_pce.h	net: dsa: Add Lantiq / Intel DSA driver for vrx200	2018-09-13 08:14:33 -07:00
Makefile	net: dsa: Add Lantiq / Intel DSA driver for vrx200	2018-09-13 08:14:33 -07:00
mt7530.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
mt7530.h	net: dsa: mt7530: support the 7530 switch on the Mediatek MT7621 SoC	2019-01-30 14:26:07 -08:00
mv88e6060.c	mv88e6060: disable hardware level MAC learning	2018-12-03 16:04:21 -08:00
mv88e6060.h
qca8k.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
qca8k.h	net: dsa: qca8k: Enable delay for RGMII_ID mode	2019-02-19 13:19:14 -08:00
realtek-smi.c	net: dsa: realtek-smi: fix OF child-node lookup	2019-01-17 14:04:49 -08:00
realtek-smi.h	net: dsa: realtek-smi: Add Realtek SMI driver	2018-07-18 13:43:38 +09:00
rtl8366.c	dsa: rtl8366: Remove unused variable.	2018-07-18 14:42:18 +09:00
rtl8366rb.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00
vitesse-vsc73xx.c	dsa: Remove phydev parameter from disable_port call	2019-02-24 22:30:34 -08:00