mirror of
https://github.com/torvalds/linux
synced 2024-11-05 18:23:50 +00:00
db91841b58
Currently the omap100k driver uses prepare and unprepare transfer hardware to enable and disable clocks for the IP block. Since these functions are called along with runtime PM and end up duplicating its functionality in a less flexible fashion we are trying to phase them out so convert this driver to do runtime PM instead. While doing so add missing error handling and remove a redundant NULL assignment. Signed-off-by: Mark Brown <broonie@kernel.org>
512 lines
13 KiB
C
512 lines
13 KiB
C
/*
|
||
* OMAP7xx SPI 100k controller driver
|
||
* Author: Fabrice Crohas <fcrohas@gmail.com>
|
||
* from original omap1_mcspi driver
|
||
*
|
||
* Copyright (C) 2005, 2006 Nokia Corporation
|
||
* Author: Samuel Ortiz <samuel.ortiz@nokia.com> and
|
||
* Juha Yrj<72>l<EFBFBD> <juha.yrjola@nokia.com>
|
||
*
|
||
* This program is free software; you can redistribute it and/or modify
|
||
* it under the terms of the GNU General Public License as published by
|
||
* the Free Software Foundation; either version 2 of the License, or
|
||
* (at your option) any later version.
|
||
*
|
||
* This program is distributed in the hope that it will be useful,
|
||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||
* GNU General Public License for more details.
|
||
*/
|
||
#include <linux/kernel.h>
|
||
#include <linux/init.h>
|
||
#include <linux/interrupt.h>
|
||
#include <linux/module.h>
|
||
#include <linux/device.h>
|
||
#include <linux/delay.h>
|
||
#include <linux/platform_device.h>
|
||
#include <linux/pm_runtime.h>
|
||
#include <linux/err.h>
|
||
#include <linux/clk.h>
|
||
#include <linux/io.h>
|
||
#include <linux/gpio.h>
|
||
#include <linux/slab.h>
|
||
|
||
#include <linux/spi/spi.h>
|
||
|
||
#define OMAP1_SPI100K_MAX_FREQ 48000000
|
||
|
||
#define ICR_SPITAS (OMAP7XX_ICR_BASE + 0x12)
|
||
|
||
#define SPI_SETUP1 0x00
|
||
#define SPI_SETUP2 0x02
|
||
#define SPI_CTRL 0x04
|
||
#define SPI_STATUS 0x06
|
||
#define SPI_TX_LSB 0x08
|
||
#define SPI_TX_MSB 0x0a
|
||
#define SPI_RX_LSB 0x0c
|
||
#define SPI_RX_MSB 0x0e
|
||
|
||
#define SPI_SETUP1_INT_READ_ENABLE (1UL << 5)
|
||
#define SPI_SETUP1_INT_WRITE_ENABLE (1UL << 4)
|
||
#define SPI_SETUP1_CLOCK_DIVISOR(x) ((x) << 1)
|
||
#define SPI_SETUP1_CLOCK_ENABLE (1UL << 0)
|
||
|
||
#define SPI_SETUP2_ACTIVE_EDGE_FALLING (0UL << 0)
|
||
#define SPI_SETUP2_ACTIVE_EDGE_RISING (1UL << 0)
|
||
#define SPI_SETUP2_NEGATIVE_LEVEL (0UL << 5)
|
||
#define SPI_SETUP2_POSITIVE_LEVEL (1UL << 5)
|
||
#define SPI_SETUP2_LEVEL_TRIGGER (0UL << 10)
|
||
#define SPI_SETUP2_EDGE_TRIGGER (1UL << 10)
|
||
|
||
#define SPI_CTRL_SEN(x) ((x) << 7)
|
||
#define SPI_CTRL_WORD_SIZE(x) (((x) - 1) << 2)
|
||
#define SPI_CTRL_WR (1UL << 1)
|
||
#define SPI_CTRL_RD (1UL << 0)
|
||
|
||
#define SPI_STATUS_WE (1UL << 1)
|
||
#define SPI_STATUS_RD (1UL << 0)
|
||
|
||
/* use PIO for small transfers, avoiding DMA setup/teardown overhead and
|
||
* cache operations; better heuristics consider wordsize and bitrate.
|
||
*/
|
||
#define DMA_MIN_BYTES 8
|
||
|
||
#define SPI_RUNNING 0
|
||
#define SPI_SHUTDOWN 1
|
||
|
||
struct omap1_spi100k {
|
||
struct clk *ick;
|
||
struct clk *fck;
|
||
|
||
/* Virtual base address of the controller */
|
||
void __iomem *base;
|
||
};
|
||
|
||
struct omap1_spi100k_cs {
|
||
void __iomem *base;
|
||
int word_len;
|
||
};
|
||
|
||
static void spi100k_enable_clock(struct spi_master *master)
|
||
{
|
||
unsigned int val;
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
/* enable SPI */
|
||
val = readw(spi100k->base + SPI_SETUP1);
|
||
val |= SPI_SETUP1_CLOCK_ENABLE;
|
||
writew(val, spi100k->base + SPI_SETUP1);
|
||
}
|
||
|
||
static void spi100k_disable_clock(struct spi_master *master)
|
||
{
|
||
unsigned int val;
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
/* disable SPI */
|
||
val = readw(spi100k->base + SPI_SETUP1);
|
||
val &= ~SPI_SETUP1_CLOCK_ENABLE;
|
||
writew(val, spi100k->base + SPI_SETUP1);
|
||
}
|
||
|
||
static void spi100k_write_data(struct spi_master *master, int len, int data)
|
||
{
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
/* write 16-bit word, shifting 8-bit data if necessary */
|
||
if (len <= 8) {
|
||
data <<= 8;
|
||
len = 16;
|
||
}
|
||
|
||
spi100k_enable_clock(master);
|
||
writew(data , spi100k->base + SPI_TX_MSB);
|
||
|
||
writew(SPI_CTRL_SEN(0) |
|
||
SPI_CTRL_WORD_SIZE(len) |
|
||
SPI_CTRL_WR,
|
||
spi100k->base + SPI_CTRL);
|
||
|
||
/* Wait for bit ack send change */
|
||
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_WE) != SPI_STATUS_WE)
|
||
;
|
||
udelay(1000);
|
||
|
||
spi100k_disable_clock(master);
|
||
}
|
||
|
||
static int spi100k_read_data(struct spi_master *master, int len)
|
||
{
|
||
int dataH, dataL;
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
/* Always do at least 16 bits */
|
||
if (len <= 8)
|
||
len = 16;
|
||
|
||
spi100k_enable_clock(master);
|
||
writew(SPI_CTRL_SEN(0) |
|
||
SPI_CTRL_WORD_SIZE(len) |
|
||
SPI_CTRL_RD,
|
||
spi100k->base + SPI_CTRL);
|
||
|
||
while ((readw(spi100k->base + SPI_STATUS) & SPI_STATUS_RD) != SPI_STATUS_RD)
|
||
;
|
||
udelay(1000);
|
||
|
||
dataL = readw(spi100k->base + SPI_RX_LSB);
|
||
dataH = readw(spi100k->base + SPI_RX_MSB);
|
||
spi100k_disable_clock(master);
|
||
|
||
return dataL;
|
||
}
|
||
|
||
static void spi100k_open(struct spi_master *master)
|
||
{
|
||
/* get control of SPI */
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
writew(SPI_SETUP1_INT_READ_ENABLE |
|
||
SPI_SETUP1_INT_WRITE_ENABLE |
|
||
SPI_SETUP1_CLOCK_DIVISOR(0), spi100k->base + SPI_SETUP1);
|
||
|
||
/* configure clock and interrupts */
|
||
writew(SPI_SETUP2_ACTIVE_EDGE_FALLING |
|
||
SPI_SETUP2_NEGATIVE_LEVEL |
|
||
SPI_SETUP2_LEVEL_TRIGGER, spi100k->base + SPI_SETUP2);
|
||
}
|
||
|
||
static void omap1_spi100k_force_cs(struct omap1_spi100k *spi100k, int enable)
|
||
{
|
||
if (enable)
|
||
writew(0x05fc, spi100k->base + SPI_CTRL);
|
||
else
|
||
writew(0x05fd, spi100k->base + SPI_CTRL);
|
||
}
|
||
|
||
static unsigned
|
||
omap1_spi100k_txrx_pio(struct spi_device *spi, struct spi_transfer *xfer)
|
||
{
|
||
struct omap1_spi100k_cs *cs = spi->controller_state;
|
||
unsigned int count, c;
|
||
int word_len;
|
||
|
||
count = xfer->len;
|
||
c = count;
|
||
word_len = cs->word_len;
|
||
|
||
if (word_len <= 8) {
|
||
u8 *rx;
|
||
const u8 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
do {
|
||
c -= 1;
|
||
if (xfer->tx_buf != NULL)
|
||
spi100k_write_data(spi->master, word_len, *tx++);
|
||
if (xfer->rx_buf != NULL)
|
||
*rx++ = spi100k_read_data(spi->master, word_len);
|
||
} while (c);
|
||
} else if (word_len <= 16) {
|
||
u16 *rx;
|
||
const u16 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
do {
|
||
c -= 2;
|
||
if (xfer->tx_buf != NULL)
|
||
spi100k_write_data(spi->master, word_len, *tx++);
|
||
if (xfer->rx_buf != NULL)
|
||
*rx++ = spi100k_read_data(spi->master, word_len);
|
||
} while (c);
|
||
} else if (word_len <= 32) {
|
||
u32 *rx;
|
||
const u32 *tx;
|
||
|
||
rx = xfer->rx_buf;
|
||
tx = xfer->tx_buf;
|
||
do {
|
||
c -= 4;
|
||
if (xfer->tx_buf != NULL)
|
||
spi100k_write_data(spi->master, word_len, *tx);
|
||
if (xfer->rx_buf != NULL)
|
||
*rx = spi100k_read_data(spi->master, word_len);
|
||
} while (c);
|
||
}
|
||
return count - c;
|
||
}
|
||
|
||
/* called only when no transfer is active to this device */
|
||
static int omap1_spi100k_setup_transfer(struct spi_device *spi,
|
||
struct spi_transfer *t)
|
||
{
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(spi->master);
|
||
struct omap1_spi100k_cs *cs = spi->controller_state;
|
||
u8 word_len = spi->bits_per_word;
|
||
|
||
if (t != NULL && t->bits_per_word)
|
||
word_len = t->bits_per_word;
|
||
if (!word_len)
|
||
word_len = 8;
|
||
|
||
if (spi->bits_per_word > 32)
|
||
return -EINVAL;
|
||
cs->word_len = word_len;
|
||
|
||
/* SPI init before transfer */
|
||
writew(0x3e , spi100k->base + SPI_SETUP1);
|
||
writew(0x00 , spi100k->base + SPI_STATUS);
|
||
writew(0x3e , spi100k->base + SPI_CTRL);
|
||
|
||
return 0;
|
||
}
|
||
|
||
/* the spi->mode bits understood by this driver: */
|
||
#define MODEBITS (SPI_CPOL | SPI_CPHA | SPI_CS_HIGH)
|
||
|
||
static int omap1_spi100k_setup(struct spi_device *spi)
|
||
{
|
||
int ret;
|
||
struct omap1_spi100k *spi100k;
|
||
struct omap1_spi100k_cs *cs = spi->controller_state;
|
||
|
||
spi100k = spi_master_get_devdata(spi->master);
|
||
|
||
if (!cs) {
|
||
cs = devm_kzalloc(&spi->dev, sizeof(*cs), GFP_KERNEL);
|
||
if (!cs)
|
||
return -ENOMEM;
|
||
cs->base = spi100k->base + spi->chip_select * 0x14;
|
||
spi->controller_state = cs;
|
||
}
|
||
|
||
spi100k_open(spi->master);
|
||
|
||
clk_prepare_enable(spi100k->ick);
|
||
clk_prepare_enable(spi100k->fck);
|
||
|
||
ret = omap1_spi100k_setup_transfer(spi, NULL);
|
||
|
||
clk_disable_unprepare(spi100k->ick);
|
||
clk_disable_unprepare(spi100k->fck);
|
||
|
||
return ret;
|
||
}
|
||
|
||
static int omap1_spi100k_transfer_one_message(struct spi_master *master,
|
||
struct spi_message *m)
|
||
{
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
struct spi_device *spi = m->spi;
|
||
struct spi_transfer *t = NULL;
|
||
int cs_active = 0;
|
||
int par_override = 0;
|
||
int status = 0;
|
||
|
||
list_for_each_entry(t, &m->transfers, transfer_list) {
|
||
if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
|
||
status = -EINVAL;
|
||
break;
|
||
}
|
||
if (par_override || t->speed_hz || t->bits_per_word) {
|
||
par_override = 1;
|
||
status = omap1_spi100k_setup_transfer(spi, t);
|
||
if (status < 0)
|
||
break;
|
||
if (!t->speed_hz && !t->bits_per_word)
|
||
par_override = 0;
|
||
}
|
||
|
||
if (!cs_active) {
|
||
omap1_spi100k_force_cs(spi100k, 1);
|
||
cs_active = 1;
|
||
}
|
||
|
||
if (t->len) {
|
||
unsigned count;
|
||
|
||
count = omap1_spi100k_txrx_pio(spi, t);
|
||
m->actual_length += count;
|
||
|
||
if (count != t->len) {
|
||
status = -EIO;
|
||
break;
|
||
}
|
||
}
|
||
|
||
if (t->delay_usecs)
|
||
udelay(t->delay_usecs);
|
||
|
||
/* ignore the "leave it on after last xfer" hint */
|
||
|
||
if (t->cs_change) {
|
||
omap1_spi100k_force_cs(spi100k, 0);
|
||
cs_active = 0;
|
||
}
|
||
}
|
||
|
||
/* Restore defaults if they were overriden */
|
||
if (par_override) {
|
||
par_override = 0;
|
||
status = omap1_spi100k_setup_transfer(spi, NULL);
|
||
}
|
||
|
||
if (cs_active)
|
||
omap1_spi100k_force_cs(spi100k, 0);
|
||
|
||
m->status = status;
|
||
|
||
spi_finalize_current_message(master);
|
||
|
||
return status;
|
||
}
|
||
|
||
static int omap1_spi100k_probe(struct platform_device *pdev)
|
||
{
|
||
struct spi_master *master;
|
||
struct omap1_spi100k *spi100k;
|
||
int status = 0;
|
||
|
||
if (!pdev->id)
|
||
return -EINVAL;
|
||
|
||
master = spi_alloc_master(&pdev->dev, sizeof(*spi100k));
|
||
if (master == NULL) {
|
||
dev_dbg(&pdev->dev, "master allocation failed\n");
|
||
return -ENOMEM;
|
||
}
|
||
|
||
if (pdev->id != -1)
|
||
master->bus_num = pdev->id;
|
||
|
||
master->setup = omap1_spi100k_setup;
|
||
master->transfer_one_message = omap1_spi100k_transfer_one_message;
|
||
master->num_chipselect = 2;
|
||
master->mode_bits = MODEBITS;
|
||
master->bits_per_word_mask = SPI_BPW_RANGE_MASK(4, 32);
|
||
master->min_speed_hz = OMAP1_SPI100K_MAX_FREQ/(1<<16);
|
||
master->max_speed_hz = OMAP1_SPI100K_MAX_FREQ;
|
||
master->auto_runtime_pm = true;
|
||
|
||
spi100k = spi_master_get_devdata(master);
|
||
|
||
/*
|
||
* The memory region base address is taken as the platform_data.
|
||
* You should allocate this with ioremap() before initializing
|
||
* the SPI.
|
||
*/
|
||
spi100k->base = (void __iomem *)dev_get_platdata(&pdev->dev);
|
||
|
||
spi100k->ick = devm_clk_get(&pdev->dev, "ick");
|
||
if (IS_ERR(spi100k->ick)) {
|
||
dev_dbg(&pdev->dev, "can't get spi100k_ick\n");
|
||
status = PTR_ERR(spi100k->ick);
|
||
goto err;
|
||
}
|
||
|
||
spi100k->fck = devm_clk_get(&pdev->dev, "fck");
|
||
if (IS_ERR(spi100k->fck)) {
|
||
dev_dbg(&pdev->dev, "can't get spi100k_fck\n");
|
||
status = PTR_ERR(spi100k->fck);
|
||
goto err;
|
||
}
|
||
|
||
status = clk_prepare_enable(spi100k->ick);
|
||
if (status != 0) {
|
||
dev_err(&pdev->dev, "failed to enable ick: %d\n", status);
|
||
goto err;
|
||
}
|
||
|
||
status = clk_prepare_enable(spi100k->fck);
|
||
if (status != 0) {
|
||
dev_err(&pdev->dev, "failed to enable fck: %d\n", status);
|
||
goto err_ick;
|
||
}
|
||
|
||
pm_runtime_enable(&pdev->dev);
|
||
pm_runtime_set_active(&pdev->dev);
|
||
|
||
status = devm_spi_register_master(&pdev->dev, master);
|
||
if (status < 0)
|
||
goto err_fck;
|
||
|
||
return status;
|
||
|
||
err_fck:
|
||
clk_disable_unprepare(spi100k->fck);
|
||
err_ick:
|
||
clk_disable_unprepare(spi100k->ick);
|
||
err:
|
||
spi_master_put(master);
|
||
return status;
|
||
}
|
||
|
||
static int omap1_spi100k_remove(struct platform_device *pdev)
|
||
{
|
||
struct spi_master *master = spi_master_get(platform_get_drvdata(pdev));
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
pm_runtime_disable(&pdev->dev);
|
||
|
||
clk_disable_unprepare(spi100k->fck);
|
||
clk_disable_unprepare(spi100k->ick);
|
||
|
||
return 0;
|
||
}
|
||
|
||
#ifdef CONFIG_PM
|
||
static int omap1_spi100k_runtime_suspend(struct device *dev)
|
||
{
|
||
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
|
||
clk_disable_unprepare(spi100k->ick);
|
||
clk_disable_unprepare(spi100k->fck);
|
||
|
||
return 0;
|
||
}
|
||
|
||
static int omap1_spi100k_runtime_resume(struct device *dev)
|
||
{
|
||
struct spi_master *master = spi_master_get(dev_get_drvdata(dev));
|
||
struct omap1_spi100k *spi100k = spi_master_get_devdata(master);
|
||
int ret;
|
||
|
||
ret = clk_prepare_enable(spi100k->ick);
|
||
if (ret != 0) {
|
||
dev_err(dev, "Failed to enable ick: %d\n", ret);
|
||
return ret;
|
||
}
|
||
|
||
ret = clk_prepare_enable(spi100k->fck);
|
||
if (ret != 0) {
|
||
dev_err(dev, "Failed to enable fck: %d\n", ret);
|
||
clk_disable_unprepare(spi100k->ick);
|
||
return ret;
|
||
}
|
||
|
||
return 0;
|
||
}
|
||
#endif
|
||
|
||
static const struct dev_pm_ops omap1_spi100k_pm = {
|
||
SET_RUNTIME_PM_OPS(omap1_spi100k_runtime_suspend,
|
||
omap1_spi100k_runtime_resume, NULL)
|
||
};
|
||
|
||
static struct platform_driver omap1_spi100k_driver = {
|
||
.driver = {
|
||
.name = "omap1_spi100k",
|
||
.pm = &omap1_spi100k_pm,
|
||
},
|
||
.probe = omap1_spi100k_probe,
|
||
.remove = omap1_spi100k_remove,
|
||
};
|
||
|
||
module_platform_driver(omap1_spi100k_driver);
|
||
|
||
MODULE_DESCRIPTION("OMAP7xx SPI 100k controller driver");
|
||
MODULE_AUTHOR("Fabrice Crohas <fcrohas@gmail.com>");
|
||
MODULE_LICENSE("GPL");
|