linux/drivers/gpu/drm/zte/zx_vga_regs.h
Shawn Guo 6911498df9 drm: zte: add VGA driver support
It adds VGA driver support, which needs to configure corresponding VOU
interface in RGB_888 format, and thus the following changes are needed
on zx_vou.

 - Rename the CSC block of Graphic Layer a bit to make it more specific,
   and add CSC of Channel to support RGB output.
 - Bypass Dither block for RGB output.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1491910226-7831-1-git-send-email-shawnguo@kernel.org
2017-05-04 13:53:05 +08:00

37 lines
1.1 KiB
C

/*
* Copyright (C) 2017 Sanechips Technology Co., Ltd.
* Copyright 2017 Linaro Ltd.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#ifndef __ZX_VGA_REGS_H__
#define __ZX_VGA_REGS_H__
#define VGA_CMD_CFG 0x04
#define VGA_CMD_TRANS BIT(6)
#define VGA_CMD_COMBO BIT(5)
#define VGA_CMD_RW BIT(4)
#define VGA_SUB_ADDR 0x0c
#define VGA_DEVICE_ADDR 0x10
#define VGA_CLK_DIV_FS 0x14
#define VGA_RXF_CTRL 0x20
#define VGA_RX_FIFO_CLEAR BIT(7)
#define VGA_DATA 0x24
#define VGA_I2C_STATUS 0x28
#define VGA_DEVICE_DISCONNECTED BIT(7)
#define VGA_DEVICE_CONNECTED BIT(6)
#define VGA_CLEAR_IRQ BIT(4)
#define VGA_TRANS_DONE BIT(0)
#define VGA_RXF_STATUS 0x30
#define VGA_RXF_COUNT_SHIFT 2
#define VGA_RXF_COUNT_MASK GENMASK(7, 2)
#define VGA_AUTO_DETECT_PARA 0x34
#define VGA_AUTO_DETECT_SEL 0x38
#define VGA_DETECT_SEL_HAS_DEVICE BIT(1)
#define VGA_DETECT_SEL_NO_DEVICE BIT(0)
#endif /* __ZX_VGA_REGS_H__ */