linux/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts
Guennadi Liakhovetski e99d7963e0 ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces
Add SDHI0 and MMCIF interfaces to armadillo800eva-reference with
regulators and pin configurations. SDHI1 is not added yet, because the
switch, that connects the interface either to an SD slot or to a WiFi
SDIO card cannot be described in DT yet.

Signed-off-by: Guennadi Liakhovetski <g.liakhovetski+renesas@gmail.com>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
2013-10-08 09:25:14 +09:00

158 lines
3.2 KiB
Plaintext

/*
* Reference Device Tree Source for the armadillo 800 eva board
*
* Copyright (C) 2012 Renesas Solutions Corp.
*
* This file is licensed under the terms of the GNU General Public License
* version 2. This program is licensed "as is" without any warranty of any
* kind, whether express or implied.
*/
/dts-v1/;
/include/ "r8a7740.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/pwm/pwm.h>
/ {
model = "armadillo 800 eva reference";
compatible = "renesas,armadillo800eva-reference", "renesas,r8a7740";
chosen {
bootargs = "console=tty0 console=ttySC1,115200 earlyprintk=sh-sci.1,115200 ignore_loglevel root=/dev/nfs ip=dhcp rw";
};
memory {
device_type = "memory";
reg = <0x40000000 0x20000000>;
};
reg_3p3v: regulator@0 {
compatible = "regulator-fixed";
regulator-name = "fixed-3.3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
};
vcc_sdhi0: regulator@1 {
compatible = "regulator-fixed";
regulator-name = "SDHI0 Vcc";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&pfc 75 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
vccq_sdhi0: regulator@2 {
compatible = "regulator-gpio";
regulator-name = "SDHI0 VccQ";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <3300000>;
vin-supply = <&vcc_sdhi0>;
enable-gpio = <&pfc 74 GPIO_ACTIVE_HIGH>;
gpios = <&pfc 17 GPIO_ACTIVE_HIGH>;
states = <3300000 0
1800000 1>;
enable-active-high;
};
leds {
compatible = "gpio-leds";
led1 {
gpios = <&pfc 102 GPIO_ACTIVE_HIGH>;
};
led2 {
gpios = <&pfc 111 GPIO_ACTIVE_HIGH>;
};
led3 {
gpios = <&pfc 110 GPIO_ACTIVE_HIGH>;
};
led4 {
gpios = <&pfc 177 GPIO_ACTIVE_HIGH>;
};
};
backlight {
compatible = "pwm-backlight";
pwms = <&tpu 2 33333 PWM_POLARITY_INVERTED>;
brightness-levels = <0 1 2 4 8 16 32 64 128 255>;
default-brightness-level = <9>;
pinctrl-0 = <&backlight_pins>;
pinctrl-names = "default";
};
};
&i2c0 {
status = "okay";
touchscreen: st1232@55 {
compatible = "sitronix,st1232";
reg = <0x55>;
interrupt-parent = <&irqpin1>;
interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */
pinctrl-0 = <&st1232_pins>;
pinctrl-names = "default";
gpios = <&pfc 166 GPIO_ACTIVE_LOW>;
};
};
&pfc {
pinctrl-0 = <&scifa1_pins>;
pinctrl-names = "default";
scifa1_pins: scifa1 {
renesas,groups = "scifa1_data";
renesas,function = "scifa1";
};
st1232_pins: st1232 {
renesas,groups = "intc_irq10";
renesas,function = "intc";
};
backlight_pins: backlight {
renesas,groups = "tpu0_to2_1";
renesas,function = "tpu0";
};
mmc0_pins: mmc0 {
renesas,groups = "mmc0_data8_1", "mmc0_ctrl_1";
renesas,function = "mmc0";
};
sdhi0_pins: sdhi0 {
renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp";
renesas,function = "sdhi0";
};
};
&tpu {
status = "okay";
};
&mmcif0 {
pinctrl-0 = <&mmc0_pins>;
pinctrl-names = "default";
vmmc-supply = <&reg_3p3v>;
bus-width = <8>;
non-removable;
status = "okay";
};
&sdhi0 {
pinctrl-0 = <&sdhi0_pins>;
pinctrl-names = "default";
vmmc-supply = <&vcc_sdhi0>;
vqmmc-supply = <&vccq_sdhi0>;
bus-width = <4>;
cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>;
status = "okay";
};